This Solicitation opportunity from Government of Canada was posted on December 12, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

G9292-244764 Folder-Inserter

Closed

WS4583985275International

Submission Closed12/17/2024, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333993

New

DIBBS

MIL-SPEC Packaging and Hazardous Materials HandlingThis subcontract for the Department of Defense, specifically the DLA Weapons Support Maritime Supply Chain ESOC Buys, involves providing specialized military packaging and labeling services for prime contractors. The scope of work requires the application of markings according to MIL-STD-129, palletization of shipments following RP001 standards, and the labeling of hazardous materials in compliance with 29 CFR 1910.1200. To execute these tasks, the contractor must utilize industrial palletizing equipment and MIL-SPEC labeling software to ensure all shipments are properly prepared for delivery. The performance of this contract will take place at Hill AFB, zip code 84056-5713. Interested parties should note that the response deadline is November 9, 2026. The project falls under NAICS code 333993 and focuses on the delivery of fully marked, labeled, and palletized shipments that meet strict military specifications.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

DLA Compliant Packaging ServicesThis subcontract for DLA Compliant Packaging Services involves providing specialized packaging and crating for REDUCER and BOSS components. These services support prime contractors delivering for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The primary objective is to ensure all components are packaged and labeled for shipment in strict accordance with RP001 DLA Packaging Requirements for Procurement to prevent corrosion during storage and transit. The performance of this contract will take place in Tracy, California, under NAICS code 333993. Interested parties should note that the response deadline is November 9, 2026, following a posting date of October 29, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Vertrod Thermal Impulse Pneumatic Heat Sealer SupplierThis 8(a) sole source subcontract through the NASA Shared Services Center involves the procurement of two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for prime contractors operating at the NASA-Stennis Space Center. The required equipment must feature 48 inch seal lengths in both 3/8 inch and 1/2 inch widths, single side heater bars, and pneumatic low pressure jaw close safety systems. To meet operational standards, all machines must be compatible with ISO7 clean room environments. The supplier is responsible for delivering two fully configured and tested units, which include a 3 year limited warranty. This procurement falls under NAICS code 333993 and was posted on October 28, 2026, with a response deadline of November 2, 2026.

NASA Shared Services Center

POSTED

DEADLINE

Sealing Machines for CHOP Shop

Solicitation # 80NSSC26948111Q

NASA Shared Services Center is seeking to procure two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for the Critical Hardware Operational Processing shop at the Stennis Space Center. These machines will be used to create airtight and watertight seals for poly and aclar bags containing fittings, seals, o-rings, and crush washers, with one unit designated for a general clean room and the other for a newly constructed ISO7 clean room. The required equipment must be made in the USA, feature 48-inch seal lengths with one machine at 3/8 inch width and one at 1/2 inch width, and include a pneumatic low-pressure jaw close safety system, safety switch indication lights, and a three-year limited warranty. This procurement is being conducted under NAICS code 333993 as a commercial item acquisition following FAR Part 12. NASA intends to award a sole source contract to Government Affairs Institute, Inc. under the authority of FAR 12.102(a) and FAR 19.8 as an 8(a) set-aside. Interested organizations must submit capability statements to the primary point of contact, McKenzie Hanson, by 3:00 p.m. CST on November 2, 2026, to determine if the procurement will be competed. All items are to be shipped to Building 9166 at the Stennis Space Center in Mississippi.

NASA Shared Services Center

POSTED

DEADLINE

Box-Making Machine Replacement

Solicitation # NRS-26-70-C

The National Records of Scotland is seeking a provider for the supply, delivery, installation, commissioning, and training associated with a replacement box-making machine. This procurement includes the necessary software, warranty, maintenance, and support services to ensure the continued in-house production of archival storage boxes and preservation packaging essential for protecting national records. Interested parties must submit their responses by the deadline of November 27, 2026, at 12:00 PM. This solicitation, identified by number NRS-26-70-C, was officially posted on October 28, 2026. Further inquiries regarding this opportunity can be directed to the designated point of contact, Iona Cooper.

National Records of Scotland

POSTED

DEADLINE

Supply of Filler Opening Cap (NSN 5340016340030)This subcontract involves the sourcing or manufacture of a Filler Opening Cap, identified by NSN 5340016340030, to support prime contractors delivering for the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider must ensure the component complies with the DLA Master List of Technical and Quality Requirements and adheres to RP001 DLA Packaging Requirements for Procurement. The scope of work requires the delivery of one physical unit to a specified destination in Chambersburg, Pennsylvania. This opportunity falls under NAICS code 333993, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # F262450

The Royal Australian Mint is seeking a provider for the supply and commissioning of a cobot palletising system. The required system must be versatile enough to be compatible with a variety of carton sizes and different pallet arrangements to optimize operational efficiency. This solicitation, identified by number F262450, was posted on October 27, 2026, with a response deadline of November 23, 2026. While the Royal Australian Mint is the contracting agency, the place of performance is listed across multiple major Australian cities, including Canberra, Sydney, Melbourne, Adelaide, Perth, Brisbane, Darwin, and Hobart. Interested parties may contact Mark Fitzpatrick for further information.

Royal Australian Mint

POSTED

DEADLINE

Downhole Deployment Valve (DDV) Supply and InstallationThis subcontract involves the supply and installation of specialized Downhole Deployment Valves for prime contractors operating on Oil & Gas Development Company Limited projects in Pakistan. The scope of work includes deploying and setting valves at precise depths to isolate the wellbore or manage fluid flow during tool deployment, as well as the subsequent actuation and retrieval of these valves according to the established drilling program. To ensure operational safety and quality, all provided equipment must strictly adhere to API standards for downhole hardware. The primary objective of the contract is the delivery of fully installed and functional Downhole Deployment Valves. Interested parties must submit their responses by November 12, 2026.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Yellow Adhesive Supplier (NSN 8040-01-663-3917)This subcontract through the Defense Logistics Agency requires the supply of specialized yellow adhesive, identified by NSN 8040-01-663-3917, for prime contractors. The material must adhere to specifications for either Lockheed Martin P/N LMAML015F3/TU or 3M P/N 7000058946. Key requirements include a minimum extendable shelf life of 12 months and the provision of SDS and HCS labels in accordance with 29 CFR 1910.1200. The contract specifies the delivery of four 5.0-ounce units FOB Destination to Camp Lemonnier in Djibouti. All packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards. This procurement falls under NAICS code 333993, with a response deadline set for November 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Purchase of Cardboard Baler

Solicitation # F2027043

Tarrant County is soliciting bids for the replacement of a cardboard baler at the Tarrant County Recycling Center under solicitation number F2027043. The project requires the awarded vendor to provide all labor and materials for the uninstallation and removal of the existing equipment and the installation of a new open-end automatic shear baler. Technical requirements for the new unit include an auto-tie system, a wire run-out sensor, a minimum total press weight of 25,350 pounds, a nominal hopper size of 30 by 30 inches, and a bale size of 30 inches wide by 40 inches deep with variable length. Safety features such as hinged access doors with safety interlocks for both the bale chamber and feed hopper are mandatory. Bidders must submit a vendor quote form, product specification sheets, warranty information, and oil and electrical system requirements. The contract will be awarded to the lowest bidder who meets all technical specifications and bids on all required items. All delivery costs, including labor, travel, fuel, freight, and the removal of current equipment, must be included in the installation pricing. Bidders must adhere to Tarrant County's General and Special Terms and Conditions, which include mandatory criminal background checks for personnel accessing county facilities and strict data security protocols for any IT-related solutions. The county also emphasizes its Historically Underutilized Businesses policy, targeting a 20 percent good faith goal for HUB participation. Invoices must be submitted to the Tarrant County Auditor's Office and reference a purchase order number, with payment typically issued within 30 days of receipt.

POSTED

DEADLINE

Biopharmaceutical Automated Fill Machine Isolator

Solicitation # 134-202627-001

Wilson Community College is soliciting proposals for the design, fabrication, and installation of an Automated Fill Machine Isolator unit for the Biomanufacturing Education and Skills Training (BEST) Center of Eastern North Carolina. The system will be integrated into simulated cleanrooms to provide a capstone training experience for students, focusing on manual aseptic processing and operator skill development rather than high-throughput production. The project encompasses multiple phases, including engineering and design, fabrication, Factory Acceptance Testing, onsite installation, commissioning, and final acceptance. While full GMP validation is not required, the equipment must meet OSHA standards and carry appropriate safety certifications from organizations such as ASME, UL, NEMA, or the American Gas Association. The contract is expected to be completed within one year of the effective date, with onsite installation anticipated after August 11, 2027. Payment is structured around milestone deliverables, with final payment contingent upon written acceptance by the BEST Center following successful inspection and training. Vendors must provide a comprehensive technical proposal, pricing, and certifications of financial condition, along with at least three customer references. The state also maintains an option for a maintenance agreement featuring two preventive safety inspections per year. Proposals are due by November 10, 2026, and will be evaluated based on a narrative consensus of strengths and weaknesses.

Wilson Community College

POSTED

DEADLINE

5600 Combo L’ Sealer and Tunnel Combination Machine SupplierThis subcontract agreement involves the supply of one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine intended for prime contractors working on State of Ohio Department of Administrative Services projects. The equipment package includes a machine with a 19 by 14 by 6 inch seal area, a precision temperature control tunnel, a 36F 3 ft Flighted Infeed Conveyor, and a Model 18-12SW Flexible Skate-wheel Conveyor. All provided machinery must exceed OSHA safety standards and be delivered as a fully functional unit accompanied by a spare parts kit. The procurement is managed by the Das105000 General Services Division Lzrs under NAICS code 333993. The solicitation was posted on October 16, 2026, with a response deadline set for November 2, 2026.

Das105000 General Services Division Lzrs

POSTED

13 days ago

DEADLINE

in 4 days

AI Contract Overview

Public Services and Procurement Canada, acting on behalf of The Winnipeg Service Canada Centre, is soliciting bids for the procurement of a Folder-Inserter for their mailroom operations in Winnipeg. This federal solicitation, identified by number WS4583985275, is managed by the Department of Public Works and Government Services. The critical deadline for all bid submissions and supporting documentation is December 17, 2024, at 14:00 EST. Bidders are explicitly instructed to disregard any conflicting closing times listed on Ariba Discovery or CanadaBuys, as any submissions received after the specified 14:00 EST cutoff will be declared non-responsive.

General Info

Winnipeg Service Canada Centre seeks folder-inserter bids by December 17, 2024, 14:00 EST.

Agency

Government of Canada → Department of Public Works and Government Services

NAICS

333993 - Packaging Machinery Manufacturing

Place of Performance

*Winnipeg, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedDec 12

Solicitation

Response DeadlineDec 17

Deadline has passed

Submission Closed

12/17/2024, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of Public Works and Government Services

Office AddressN/A

Contacts

Alibhay Premjee Shan (SPAC/PSPC) (il-lui / he-himPoint of Contact

contact@example.gov

Full Description

AMENDMENT TO CLOSING TIME: Please disregard the Ariba Discovery posting response deadline closing time and CanadaBuys posting closing time. All required supporting documentation and bid submission must be submitted by December 17, 2024 at 14:00 EST. All bids submitted after 14:00 EST will result in the bid being declared non-responsive. Public Services and Procurement Canada, on behalf of The Winnipeg Service Canada Centre, has a requirement for a Folder/Inserter for their mailroom.