Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GAGE, RECEIVER PRESS

Active
SPE4A5-26-T-297NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of one GAGE, RECEIVER PRESS with NSN 6685-01-483-3900 and part number 19BXXXX0333A4CXAXX02 from Cameron Energy Services Corp., under solicitation SPE4A5-26-T-297N. Delivery is required within 171 days to the Defense Logistics Agency distribution facility in Tracy, California, with FOB origin terms and no quantity variance permitted. Inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with preservation, marking, and barcoding following MIL-PRF-23199E and AIM BC1 standards. Palletization and packaging align with DLA’s procurement requirements, and no special marking is required. Mercury and mercury-containing compounds are strictly prohibited in the item or its packaging unless used functionally in specified instruments, batteries, or sensors, and any portable mercury-containing devices must have a secondary containment system per NAVSEA 5100-003D. Sampling follows MIL-STD-1916 or ASQ standards with zero non-conformances required unless otherwise defined, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is classified as a critical application item. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions aligned to the solicitation issue or award date. The contract explicitly excludes Item Unique Identification as requested by the Service customer and includes prohibitions on mercury in preservation, packaging, and shipping processes. The point of contact for inquiries is Kendra Coleman, and the response deadline for the solicitation was July 29, 2026.

General Info

Procure one GAGE RECEIVER PRESS per NSN, deliver to Tracy CA in 171 days, no mercury, strict packaging, zero defects, critical item.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance UseView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Kendra Coleman
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GAGE,RECEIVER PRESS
GAGE,RECEIVER PRESS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
CAMERON ENERGY SERVICES CORP. 05991 P/N 19BXXXX0333A4CXAXX02
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A5-26-T-297N
SECTION B
PR: 7017571479 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017571479 0001 EA 1.000
NSN/MATERIAL:6685014833900
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION, PACKAGING, MARKING SHALL BE IAW MIL-PRF-23199E BAR CODING SHALL BE IAW AIM BC1.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
SPE4A5-26-T-297N
SECTION B
PR: 7017571479 PRLI: 0001 CONT’D
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/17/2027 Original Required Delivery Date:01/19/2027
SPE4A5-26-T-297N NSN/Part Number: 6685-01-483-3900 Quantity: 1 EA Purchase Request: 7017571479QTY: 1 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334512
New
DIBBS
PYROMETER, INDICATINGThe contract pertains to the procurement of one indicating pyrometer, identified by NSN 6685-01-350-9216 and part number 4200-001-001, supplied by King Nutronics Corporation as a commercial off-the-shelf item. Delivery is required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no quantity variance permitted. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Packaging and preservation must adhere to DLA requirements and explicitly prohibit the use of mercury or mercury compounds in any form during preservation, packaging, or marking, except for functional uses in specific instruments or batteries as outlined by NAVSEA. Mercury-containing portable lamps and instruments must include shockproof design and a secondary containment boundary. The supplier must provide Safety Data Sheets aligned with OSHA’s revised Hazard Communication Standard and conforming labels per 29 C.F.R. 1910.1200, and ensure employee training on these requirements. Inspection and acceptance occur at the destination, with no need for item unique identification. The contract was issued under solicitation SPE4A5-26-T-301F, with a response deadline of July 29, 2026, and a required ship date of January 17, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIALThe contract pertains to the procurement of a single pressure dial gauge with NSN 6685-01-030-0260, issued under solicitation SPE4A5-26-T-298M by the Defense Logistics Agency through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within five days of award, and responses must be submitted by July 29, 2026. The item is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Technical data associated with the product is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data, with DFARS 252.225-7048 enforcement. The NAICS code 334512 applies, and inquiries should be directed to Yvonne Jackson-Dias at the provided contact details.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
GAGE, COMPOUND PRESSThis contract pertains to the procurement of seven compound press gauges, identified by NSN 6685016781282 and part number 69020, under solicitation SPE4A6-26-T-08UP, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 164 days from the award date, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the manufacturer’s facility. The item must be marked as a critical application item and labeled with special marking code 05 for delicate instruments, following MIL-STD-129 for labeling and MIL-STD-2073-1E for packaging, with preservation methods specified as preservative coating and dry storage. Packaging and shipment must adhere to DLA’s procurement packaging requirements and cannot contain mercury or mercury compounds in any preservation, packaging, or labeling materials, consistent with IP056 and broader mercury restrictions that allow only functional exceptions in batteries, lighting, instruments, and weapon systems under strict containment guidelines per NAVSEA 5100-003D. All suppliers must comply with tailored higher-level quality requirements, zero-defect sampling standards under MIL-STD-1916 or ASQ H1331, and verification levels for critical, major, and minor attributes, with non-conforming items subject to removal of government markings. The contract imposes stringent source approval documentation through RC001, mandates use of calibrated measuring and test equipment per RT001, and applies covered defense information protocols under RD003. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with a need ship date of January 10, 2027, and original delivery deadline of February 11, 2027. The unit of issue is each, at an agreed price of $7.00 per unit, for a total value of $49.00. The solicitation incorporates technical and quality standards referenced in the DLA Master List, with revisions controlled by the award date for simplified acquisitions. All documentation, sampling, and quality procedures must align with government-prescribed methodologies, and failure to meet any requirement may result in rejection at origin. Electronic procurement and compliance tools are referenced for unit of issue conversion and procurement documentation, and the primary point of contact is John Schaefer at DLA.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSURThis contract is for the procurement of two pressure transmitters with part number PGT-GP-1500-G-2 and NSN 6685015400723, classified as a critical application item under specification MIL-P-24212C. Delivery is scheduled within 171 days from the contract award, with FOB origin terms and zero tolerance for quantity variance. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including palletization per RP001 and special handling for hazardous materials under IP025 and IP056, which strictly prohibit mercury or mercury compounds in preservation, packaging, and marking except for exempted functional uses such as batteries or sensors specifically authorized by NAVSEA. Portable instruments containing mercury must include a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, assigning verification levels or AQLs based on attribute criticality. The supplier must adhere to ISO 9001:2015 quality requirements and ensure all measuring and test equipment is calibrated and documented. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with the delivery deadline set for January 22, 2027, and a required ship date of January 17, 2027. Technical and quality requirements are referenced via R-numbers from the DLA Master List, and all provisions are controlled by the solicitation revision dated May 3, 2021.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
SWITCH, THERMOSTATIC
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334512
New
DIBBS
GAGE, COMPOUND PRESSURE
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
ALARM, AUDIBLE-VISUAThe contract pertains to the procurement of an audible-visual alarm system under solicitation SPE4A6-26-T-08EZ, with a total quantity of four units identified by NSN 6350015529908 and part number 702020-600. Delivery is required within 171 days of award, with shipment destined to DLA Distribution San Joaquin in Tracy, California, under FOB origin terms. The contract strictly enforces compliance with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Zero variance is permitted in quantity, and inspection and acceptance occur at the destination. All items must meet technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII or an AQL of 0.1. Mercury and mercury-containing compounds are prohibited in all supplies except in specific functional applications such as batteries, fluorescent lamps, and sensors, which must include a secondary containment boundary per NAVSEA 5100-003D. Documentation for source approval must be provided per RC001, and covered defense information provisions apply. The unit of issue is each (EA), with a total price of $4.00 per unit, and the required delivery date is January 20, 2027.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTICThis contract specifies the procurement of a self-indicating bimetallic thermometer under NSN 6685000666102, with a requirement for 55 units to be delivered within 343 days FOB origin. The item is classified as a critical application and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including applicable revisions as of the solicitation or award date. The thermometer must not contain mercury or mercury compounds in any part, except where explicitly allowed for functional components like sensors or controls under strict containment rules per NAVSEA 5100-003D. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with special labeling indicating “Delicate Instrument,” and preservation methods must exclude mercury entirely. Inspection and acceptance occur at the manufacturer’s origin, with zero non-conformances required in sampling under MIL-STD-1916 or ASQ H1331, and undefined attributes treated as major. An associated first article test line item requires one unit to be submitted for verification, with no separate charge assumed unless specified, and failure to meet FAT requirements may result in rejection. The delivery address is DLA Distribution San Joaquin in Tracy, California, with a specified need ship date of May 9, 2027 and original delivery date of June 26, 2027. The item has no shelf life restriction and is subject to the Contractor First Article Test requirements under FAR 52.209-3, with all data requirements tied to the referenced Technical Data Package revisions.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
Federal
66--SENSOR,AMBIENT TEMP
DLA Aviation

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334512
New
DIBBS
Precision Pressure Dial Gauge SupplyThe contract requires the supply of a calibrated pressure dial gauge identified by NSN 6685017140256, designed to meet rigorous military specifications for performance, durability, and inspection standards. The item must be fully compliant with military packaging and labeling requirements as defined by MIL-STD-129, ensuring proper handling, identification, and traceability throughout the supply chain. Delivery is mandated to DLA Distribution in San Joaquin, California, with the place of performance specified as Tracy, California, and the associated ZIP code 95304-5000. This subcontract opportunity, posted on July 20, 2026, has a response deadline of July 28, 2026, and falls under NAICS code 334512, which pertains to the manufacturing of instruments and related products. The contracting office is the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, indicating a direct military procurement need. The equipment is critical for operational use and must ensure precision and reliability under demanding conditions, with no flexibility in compliance for packaging, labeling, or performance criteria as outlined by federal military standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334512
New
DIBBS
THERMOSTAT, FLOW CONTROLThis contract is for the procurement of one thermostat, flow control, identified by NSN 6685-01-339-1227, classified as a commercial off-the-shelf (COTS) item with critical application status, supplied by Oshkosh Defense LLC and Rolls-Royce Solutions America Inc. The contract is structured as an indefinite-delivery contract with a firm-fixed-price basis, allowing orders between 149 and 601 units annually over a five-year period, with an estimated annual demand of 601 units and a maximum contract value of $350,000. Delivery is required within 59 days after the date of order, with FOB destination terms specifying that title and risk transfer upon arrival at the destination, and inspection and acceptance both occur at the point of delivery. Packaging and marking must strictly conform to MIL-STD-2073-1E and MIL-STD-129, with preservation methods coded as 10 and no special marking required; palletization must comply with DLA packaging requirements RP001, and hazardous materials are governed by IP025. A hard-copy DD Form 250 packing list must be included in each shipment, and all shipments must be processed through Wide Area Workflow for invoicing and payment. The contract imposes extensive compliance obligations under Federal Acquisition Regulation clauses covering cybersecurity, supply chain security, socioeconomic sourcing, and environmental and safety standards, including prohibitions on hexavalent chromium, toxic material disposal, foreign-sourced critical minerals, and items from the Xinjiang region. Contractors must maintain active SAM registration, comply with cybersecurity requirements under 252.204-7012, and submit disclosures for covered defense telecommunications equipment or services. The evaluation is based on a trade-off methodology where past performance, particularly historical quality and delivery compliance, is weighed equally with price, meaning technical excellence and reliability are as critical as cost. Offerors must submit proposals via DIBBS or authorized electronic means, with supplemental documentation deadlines for alternate products and traceability records. Additional requirements include adherence to Buy American provisions, duty-free entry conditions, prompt payment terms with electronic funds transfer, and compliance with personal identity verification and antiterrorism training mandates for personnel. All contract clauses incorporate applicable standards by reference, and deviations are explicitly authorized for certain provisions, including sustainable product use and subcontracting rules for commercial items.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIALThis contract specifies the procurement of five dial pressure gauges, identified by part number 25-1009-SW-02L-VAC/15PS and NSN 6685017140256, sourced from Ashcroft Inc and Tri-State Technical Sales Corp. The item is designated as a critical application item, requiring strict adherence to technical and quality standards defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers such as RT001 for measuring equipment, RQ009 for inspection and acceptance at origin, RP001 for DLA packaging, and RQ017 for physical identification marking. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor, with AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must meet DLA packaging requirements. Delivery is FOB origin with a 158-day lead time to reach the receiving warehouse in Tracy, California, and the contract enforces a strict zero variance in quantity. Documentation for source approval, transportation protocols, and unit of issue alignment with ANSI X12 standards are also mandated, with the required ship date set for January 3, 2027, and original delivery due by March 6, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
TAPE, DRIVE, RETICLEThe contract solicitation is for 178 units of TAPE, DRIVE, RETICLE with NSN 1430-01-318-3414, under solicitation number SPE4A5-26-T-302G, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The requirement is governed by a suite of technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to specific packaging standards, documentation mandates for source approval, and the mandatory removal of government identification from non-accepted supplies. Physical identification and marking of the bare item are required, though Item Unique Identification is not mandated per the service customer’s instruction. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals located in the U.S. or overseas, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed mandatory DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. Delivery is required within 171 days after award, with performance to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation closes on July 29, 2026, and the NAICS code is 336415. All correspondence and inquiries should be directed to Rasulbek Kilichev at the provided contact information.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract is for a spacer sleeve item with part number 741073CL13 and NSN 5365016879226, under solicitation SPE4A5-26-T-302M, requiring delivery of one unit within five days to Fort Irwin, California. The item is classified as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking specifications per MIL-STD-129. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and the item must not bear government identification if not accepted. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels based on criticality. FAA airworthiness approval is mandated via CDRL RQ019, and preservation, packaging, and marking adhere to DLA and FAA-specific rules. The item must be shipped via the fastest traceable means, excluding parcel post, with delivery FOB origin and inspection and acceptance taking place at destination. The contract includes no quantity variance and specifies no unique item identification per customer request. The supplier, RTX Corporation, must meet all technical data package requirements referenced in QAP 13873, with an expiration of the contract data requirement set for January 14, 2025, and the required delivery date is July 15, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GIMBAL AND BRACKETThe contract specifies the procurement of three Gimbals and Brackets with part number 1878032 and NSN 6605-00-089-9500 under solicitation SPE4A5-26-T-299F, with a total contract value of $9.00 and a delivery requirement of 171 days from award, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DLA packaging requirements, with no special marking required and no palletization beyond standard practices. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The contract references technical and quality standards from the DLA Master List, mandates zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The supplier must adhere to CMMC Level 2 cybersecurity self-assessment requirements, implement configuration change management procedures, and prohibit the intentional use of mercury or mercury-containing compounds in any component, preservation, packaging, or marking, except for specific exempted applications defined by NAVSEA which must include secondary containment. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and all supplies must be cleared of government identification if not accepted. The original required delivery date is March 10, 2027, with a need ship date of January 17, 2027.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325998
New
DIBBS
SCALE REMOVING COMPThe contract specifies the procurement of a scale removing compound identified by NSN 6850-12-382-7353 and commercial part number 56.00.562, supplied in container units with each container holding 100 tabs for a total of 150 tabs per container. A total of 216 containers are required to be delivered FOB destination within 144 days of contract award, with no tolerance for quantity variance. The product is classified as a commercial off-the-shelf item, and original manufacturer commercial packaging is mandatory—repackaging is prohibited. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must adhere to DLA packaging standards. The supplier must provide GHS-compliant Safety Data Sheets and approved product labels, which must be reviewed and approved by technical personnel before contract award, with copies submitted to the DLA Aviation HMIRS office. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The material has no shelf life restriction. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 325998, with a response deadline of July 29, 2026, and an award expected under contract number SPE4A5-26-T-301W.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, TANGThe contract is for a single washer, tang, identified by NSN 5310-00-089-4828, under solicitation SPE4A5-26-T-301L, with a required delivery within 20 days after award. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date based on acquisition size. Packaging must comply with DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked as required. Sampling inspection follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances mandated unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and performance is to be delivered to JBPHH, HI, 96853-1801. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Anthony Nickens listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FITTING, BREAKAWAYThe contract pertains to the procurement of 12 units of a breakaway fitting identified by NSN 1560-01-148-1719 under solicitation SPE4A5-26-T-299Y, with a delivery deadline of 171 days after award. The acquisition is structured as a total small business set-aside under NAICS code 336413, managed by the Department of Defense through the ASC Supplier Operations OEM Division. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or award date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, but item unique identification is explicitly not required per the service customer’s directive. Measuring and test equipment must meet specified standards, and documentation for source approval is mandatory. The place of performance is New Cumberland, Pennsylvania, with Kirstie Ragsdale as the primary point of contact. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
STATOR ASSEMBLYThe contract pertains to the procurement of 102 units of a stator assembly identified by NSN 1630-01-320-6510 and part number 59002936-001 manufactured by Honeywell International Inc. The item is designated as a Critical Safety Item and a Critical Application Item, triggering stringent inspection requirements including 100% verification of critical characteristics such as dimensional tolerances of .001 inch or less, surface finishes of 16 RMS or finer, geometric tolerances of .002 inch or less, Class 3 or higher threads, angular tolerances of 1 degree or tighter, hardness, material certifications, dynamic and static balancing, special processes like welding and plating, heat treatment, and more. All items must be marked in compliance with MIL-STD-129, including contractor and actual manufacturer CAGE codes, part number, lot, and serial number if available, with no unit identification required per the service customer’s request. The contract mandates adherence to SAE AS9100 quality standards and requires a CMMC Level 2 Self-Assessment for cybersecurity compliance. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, and all documentation must satisfy DLA’s packaging and procurement requirements under RP001 and MIL-STD-2073-1E. The item is classified as a commercial item with no shelf life and is subject to a firm fixed price with no variance permitted in quantity. Inspection and acceptance occur at origin, with delivery due 620 days after award, shipped to DLA Distribution in San Diego under FOB origin terms. Waivers or deviations require explicit approval from the DSC Contracting Officer.
Precision Turned Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334513
New
DIBBS
INDICATOR, RATE OF FThe contract pertains to the procurement of one unit of an indicator with a rate of flow, identified by part number FT-32AEYS-LEAS4072 and NSN 6680015378621, issued under solicitation SPE4A5-26-T-298N. Delivery is required within 171 days from the contract date, with a required delivery date of November 28, 2026, and a need ship date of January 17, 2027. The item must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and marking strictly following these guidelines. Sampling and verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are defined with verification levels or AQLs as mandated. The product is classified as a Critical Application Item and must have all government identification removed if non-accepted, with bare item marking as required by RQ017. Covered Defense Information applies, and all documentation must align with referenced DLA directives. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
WEIGHT, WHEEL BALANCThe contract pertains to the procurement of Wheel Balancing Weights, identified by NSN 1630-01-281-8724 and part number 2609689 from Honeywell International Inc., with a quantity of 265 units. It is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List revision in effect on the solicitation issue date, and all inspections must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. Critical attributes are subject to verification level VII, major to IV, and minor to II, with AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application item, and though Unique Item Identification is not required, physical marking per RQ017 is mandatory. Delivery is FOB origin with a 171-day lead time, and acceptance is at destination. Packaging must adhere to MIL-STD-129 and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous, with palletization in compliance with DLA Packaging Requirements. The required delivery date is March 2, 2027, with a ship date of January 17, 2027. All shipments must be sent to the DLA San Joaquin receiving warehouse in Tracy, CA, and transportation procedures must follow DLAD Proc Notes C19 and C20. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and covered defense information is subject to strict handling protocols. The contract is managed by the Department of Defense under solicitation number SPE4A5-26-T-300F, with Dominique Howard as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details