Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Galvanized Machine Bolt and Hardware Supplier

Active

State & Local

Response Deadline10/30/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement establishes a partnership with a supplier to provide galvanized machine bolts and nuts for prime contractors working on Nebraska Public Power District electrical utility projects. The scope of work specifically requires the delivery of 1/2 x 12 inch square head bolts and nuts that adhere to strict industry standards, including ANSI 119.4 Class A, ANSI/ACEA S-70-547, ANSI C62.11, and EEI TDJ-1 specifications. To ensure regulatory and quality compliance, the supplier must strictly follow Buy America and Build America, Buy America provisions. All hardware delivered under this contract must be accompanied by Certificates of Compliance to verify that the materials meet the necessary technical and legal requirements.

General Info

Supplier provides compliant galvanized bolts and nuts for Nebraska Public Power District projects.

Agency

Nebraska Public Power District

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

NE, USA

Set-Aside

NONE

Documents

This scope was carved out of 26092.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BABA Line Hardware and Cable Material

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 10:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNebraska Public Power District

ContactsNo contacts available

OfficeN/A

Organization / AgencyNebraska Public Power District

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies galvanized machine bolts and nuts for prime contractors on NPPD electrical utility projects. Provides 1/2 x 12 IN SQ HD/NUT galvanized square head bolts meeting ANSI 119.4 (Class A), ANSI/ACEA S-70-547, ANSI C62.11, and EEI TDJ-1 specifications. Must conform to Buy America and Build America, Buy America provisions. Delivers specified hardware with Certificates of Compliance.

Similar Contracts

Same NAICS industry code

Screw Thread Insert Supplier (Non-Locking and Self-Locking)This subcontract, managed by the General Services Administration's Supply Chain Management Contracting Division, requires the procurement of 80 high-precision screw thread inserts for use by prime contractors on government projects. The order consists of 40 non-locking inserts, part number K4SRW258-258L, featuring 4-point wrenching recesses, and 40 self-locking inserts, part number SRW258, featuring 6-point wrenching recesses. These components must be compatible with magnesium and aluminum substrates. The contract falls under NAICS code 332722 and mandates strict adherence to domestic sourcing requirements, specifically requiring a Buy American Certificate in accordance with FAR 52.225-2. Interested parties must respond by October 26, 2026.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Coated Fastener Supply

W071 Endist Omaha

POSTED

DEADLINE

in about 1 month

Industrial Bolt and Fastener AssortmentsThis subcontract, issued by the Department of Defense through W6QM Micc-Ft Drum, involves the supply of high-grade industrial bolts and fasteners for prime contractors supporting US Army hardware procurements. The scope of work requires the delivery of Grade 5 carriage bolt assortments, Grade 8 large assortments, and M6-M24 master assortments in 8.8 and 10.9 strength classes. All provided equipment must be new and strictly adhere to the Buy American Balance of Payments Program standards. The opportunity is designated as a total Small Business Set Aside under NAICS code 332722. Interested parties must respond by October 29, 2026, to provide the shipped assortments as specified in the contract line item numbers. Performance for this requirement is associated with location 22211.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Inconel Welding Stud Manufacturing and SupplyThis small business set-aside subcontract through DLA Maritime - Puget Sound involves the manufacture and supply of Inconel welding studs for prime contractors. The studs must be produced according to ASTM-B446, UNS N06625 Grade 1 specifications in an HF annealed and pickled condition, with threads conforming to MIL-S-24149 Type V. Performance for this contract will take place in Bremerton, Washington. The supplier is required to strictly adhere to the Counterfeit Detection and Avoidance Program guidelines and provide comprehensive supply chain traceability documentation. Final deliverables include the physical welding studs accompanied by a complete traceability package to ensure material integrity and compliance with Department of Defense standards.

DLA Maritime - Puget Sound

POSTED

DEADLINE

Manufacture and Supply of Special Emphasis Level I Self-Locking Cap ScrewsThis subcontract involves the manufacture and supply of 50 Special Emphasis Level I self-locking cap screws for prime contractors supporting Navsup Weapon Systems Support Mechanicsburg shipboard projects. The selected provider must perform precision machining in accordance with FF-S-86 and MIL-DTL-18240 standards while ensuring strict material traceability per MIL-STD-792. Additionally, all non-metallic components must be verified to meet NAVSEA SS800-AG-MAN-010/P-929U toxicity and flammability requirements. To qualify, the contractor must hold ISO-9001 or MIL-I-45208 certification. The final deliverables include the 50 units and a comprehensive certification data package. This opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Critical Fastener and Hardware SupplyThis 8(a) sole source subcontract, managed by the Department of Defense for the Southwest Regional Maintenance Center, involves the supply of high-strength studs, nuts, and specialized fasteners for NAVSEA SWRMC ship maintenance projects. The scope focuses on the manufacture or procurement of specific critical material parts, specifically part numbers 00075160707 and 00116036885, utilizing high-grade steel and alloys. Performance will take place in San Diego, California, under NAICS code 332722. The contractor is required to maintain strict adherence to NSN/NIIN tracking and NAVSEA packing standards, with all deliveries verified via DD Form 250. A primary requirement of the agreement is ensuring full traceability for all delivered quantities of hardware to meet rigorous naval maintenance specifications.

Southwest Regional Maintenance Center

POSTED

DEADLINE

Manufacture of NASM15795 Flat Washers (NSN 5310-01-733-9773)This subcontract involves the manufacture of 1,000 flat washers under NSN 5310-01-733-9773 for prime contractors supporting NAVSUP Weapon Systems Support Mech projects. The components are specifically designed for Seal Delivery Vehicle applications and must be produced in accordance with NASM15795-810 and TDP Version O02. Strict adherence to technical and regulatory standards is required, including the use of mercury-free materials and physical marking compliant with MIL-STD-130. The project mandates Special Emphasis Level I quality assurance and full compliance with the Buy American Act. The response deadline for this Department of Defense requirement is November 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Supply of CRES Collar Weld StudsThis subcontract, issued by DLA Maritime Portsmouth for the Department of Defense, requires the manufacture and supply of 30 specialized CRES collar weld studs. The components must be 1/2-13UNC-2A X 2 IN LG, fabricated from CRES MIL-S-24149 TY V, CL 4 material, and strictly conform to DWG 6399340 REV-B, PC-4. To ensure quality and regulatory adherence, the provider must deliver a Certificate of Compliance and maintain full supply chain traceability, batch identification, and material certifications. Eligible bidders must possess a valid CAGE code and demonstrate compliance with CDAP standards. This opportunity is designated as a Total Small Business Set Aside under NAICS code 332722, with the place of performance located in Kittery, Maine. Interested parties must submit their responses by October 27, 2026.

DLA Maritime - Portsmouth

POSTED

DEADLINE

Specialized Fastener Supply (K-Monel/Nickel Alloy)This subcontract involves the supply of certified high-strength fasteners for prime contractors supporting NAVSUP Weapon Systems Support projects under the Department of Defense. The scope of work includes providing continuous threaded studs, stem retaining nuts, and self-locking heavy hex nuts manufactured from Alloy C51000 and QQ-N286/MIL-DTL1222 materials. To ensure quality and safety, the contractor must perform axial and wedge tensile testing in accordance with FED-STD-H28. All delivered fasteners must include full heat and lot traceability along with material certifications covering both annealed and age-hardened properties. This procurement falls under NAICS code 332722, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

53--SCREW,CLOSE TOLERANCE

Solicitation # SPE4A627T5595

POSTED

DEADLINE

53--BOLT,MACHINE

Solicitation # SPE4A627T5572

POSTED

DEADLINE

Solicitation # SPMYM227Q0126

DLA Maritime Puget Sound is soliciting bids for a firm fixed-price supply contract for Inconel welding studs, specifically requesting 200 units of 3/8 inch studs with a 3 inch nominal length and additional 6 inch studs. The items must be manufactured from ASTM-B446, UNS N06625 Grade 1 material in an HF annealed and pickled condition, with threads conforming to MIL-S-24149 Type V. This procurement is a 100 percent small business set-aside under NAICS code 332722 and PSC 5307, utilizing commercial and simplified acquisition procedures per FAR Parts 12 and 13.5. The contract requires FOB Destination delivery to the Puget Sound Naval Shipyard in Bremerton, Washington, with a requested delivery date of October 23, 2026. Award will be granted to the responsible offeror deemed most advantageous based on technical merit and price. Submission requirements include a completed pricing list for each CLIN, a cage code, manufacturer information, and current SAM.gov registration. Contractors must adhere to ASTM-D-3951 for packaging and marking, use the DLA Vendor Shipment Module for shipping labels, and submit invoices electronically via Wide Area Workflow. If applicable, contractors must provide a current NIST SP 800-171 assessment unless the items are identified as Commercial Off The Shelf.

DLA Maritime - Puget Sound

POSTED

DEADLINE

More opportunities from Nebraska Public Power District

Same awarding agency

Underground Cable Identification Tag SupplierThis subcontract agreement establishes a supplier for vinyl underground cable identification tags to support prime contractors on Nebraska Public Power District electrical utility projects. The supplier is required to provide six inch vinyl tags in both red and yellow colors that strictly adhere to NEMA STD Specification No. TDJ-162. The contract mandates full compliance with Buy America and Build America, Buy America provisions. The specific deliverable consists of two red and two yellow vinyl identification tags, with the solicitation process concluding on October 30, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 16 hours ago

DEADLINE

UHD Tri-Conductor Power Cable SupplierThis subcontract opportunity is for the supply of 775 feet of UHD Tri-Conductor power cable to support prime contractors on Nebraska Public Power District electrical utility projects. The required material is 2-350 4/0NEUT, 600V Aluminum cable that must strictly adhere to ICEA S-66-524 and UL 854 Type USE-2 specifications. All delivered products must be accompanied by Certificates of Compliance to verify these technical standards. Compliance with federal procurement regulations is mandatory, specifically the Buy America and Build America, Buy America standards. Interested parties should note that the response deadline is October 30, 2026, and the project falls under NAICS code 235310.

Electrical Contractors

POSTED

about 16 hours ago

DEADLINE

BABA Line Hardware and Cable Material

Solicitation # 26092

Request for Quote No. 26092, issued by the Nebraska Public Power District, seeks the procurement of BABA Line Hardware and Cable Material. The scope of work covers several categories, including ACSR conductors, galvanized steel strand cables, transmission line hardware, and insulators. All materials must adhere to strict industry standards, including NEMA TDJ-162, EEI TDJ-1, ANSI C62.11, and UL 854. A critical requirement of this solicitation is compliance with Buy America and Build America, Buy America (BABA) provisions for federally funded transportation projects. Deliveries are to be made to the Central Stores facility in York, Nebraska, with strict receiving hours from Monday through Thursday, 8 AM to 4 PM. Specific shipping mandates include the use of open bed trucks for reels in an upright position and flatbed hauls for oversized pallets. Sellers must provide certificates of compliance upon delivery and include all necessary packing lists and bills of lading. Invoices should be emailed to the accounts payable department and must include the seller's Federal Taxpayer Identification Number. The procurement process is managed by Buyer Shane Kelly, with a response deadline of October 30, 2026.

POSTED

about 16 hours ago

DEADLINE

Right-of-Way Mowing and Mechanical Brush ControlThis subcontract opportunity involves providing mechanical mowing and brush control services for transmission line projects managed by the Nebraska Public Power District. The selected contractor will be responsible for mowing rights-of-way to establish grass landscapes and utilizing industrial mowers and brush hogs to mechanically cut herbaceous plants and vegetation under four feet in height. The project falls under NAICS code 561730 and requires the delivery of fully mowed and mechanically cleared rights-of-way. Interested parties must submit their responses by the deadline of November 27, 2026.

Landscaping Services

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Herbicide and Pesticide Application for Vegetation ControlThis subcontract involves the application of herbicides and pesticides for prime contractors working on Nebraska Public Power District transmission line projects. The primary objective is the chemical treatment of mowed areas and stumps to suppress woody growth, with a strict requirement for a minimum efficacy rate of 95 percent to ensure a properly treated right-of-way. Qualified providers must utilize certified pesticide applicators and professional commercial application equipment to execute the work. Interested parties should note that the response deadline for this opportunity is November 27, 2026.

Other Services to Buildings and Dwellings

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Utility Line Clearance and Right-of-Way Tree TrimmingThis subcontract for Utility Line Clearance and Right-of-Way Tree Trimming involves providing professional tree and brush removal, trimming, and side trimming for prime contractors on Nebraska Public Power District transmission line projects. The scope of work includes clearing 75-foot widths for 230kV lines and 100-foot widths for 345kV lines, as well as removing fall-in trees and managing the chipping and disposal of all debris to deliver a cleared right-of-way. To ensure safety and quality, the contractor must employ ISA or NAA Certified Arborists and hold Line Clearance Tree Trimmer Certification. All operations must strictly comply with OSHA 1910.269, NESC, NEC, and ANSI Z133.1 standards. The solicitation was posted on October 20, 2026, with a response deadline of November 27, 2026.

Landscaping Services

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Tree Trimming and Vegetation Control of Multiple Transmission Lines

Solicitation # 26084

Nebraska Public Power District is soliciting bids under RFB No. 26084 for tree trimming and woody vegetation control across multiple 230kV and 345kV transmission lines, specifically lines 2311, 3508, 3509, and 3510. The scope of work includes tree and brush removal, side trimming, mowing, cutting, chipping, and the application of herbicides and pesticides. Contractors must maintain clearance widths of 75 feet for 230kV lines and 100 feet for 345kV lines, achieving at least 95 percent control of woody vegetation. The project is scheduled to begin on January 4, 2027, with a completion deadline of November 21, 2027, and an expected award date on or before December 11, 2026. Bidders must demonstrate significant experience, preferably five years in business and the completion of at least two similar right-of-way projects within the last three years. Required submissions include the General Foreman's resume, certifications for a line clearance tree trimmer, a certified arborist, and all pesticide applicators, as well as OSHA 300 and 300A reports from the last three years and a written safety program. Compliance with NESC, NEC, and OSHA Standard 1910.269 is mandatory. Bids are due by November 27, 2026, and will be awarded to the responsible bidder providing the best evaluated bid. Payment terms specify that 95 percent of the price is paid upon acceptable performance, with 5 percent retained until final acceptance.

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Tree Trimming and Vegetation Control of Multiple Transmission Lines

Solicitation # Request for Bid (RFB) No. 26083

Nebraska Public Power District is seeking bids for Request for Bid No. 26083 to secure comprehensive tree trimming and woody vegetation control services for multiple 230kV and 345kV transmission lines. The scope of work encompasses the entire right-of-way from substation to substation and requires the contractor to provide all necessary labor, supervision, materials, equipment, and mobilization. Specific tasks include tree and brush removal, side trimming, waste disposal, mowing, chipping, and the application of herbicides and pesticides. The bidding process is currently open, with a submission deadline of November 20, 2026, at 5:00 PM. Interested parties should note that there is no pre-bid meeting scheduled. The project is categorized under tree trimming and vegetation control labor, and all inquiries should be directed to Procurement Specialist Greg Trofholz.

Landscaping Services

POSTED

DEADLINE

in about 1 month

Hebron Rotor Out Generator Inspection

Solicitation # Request for Bid (RFB) No. 26087

The Nebraska Public Power District is issuing Request for Bid No. 26087 for a Rotor-Out Generator Inspection at the Hebron Combustion Turbine Power Generation Facility in Hebron, Nebraska. The selected contractor will be responsible for providing all necessary labor, materials, services, supervision, tools, transportation, and construction equipment required to complete the inspection. This project falls under the Turbine Generator Maintenance and Repair category. The bidding process is currently open, with a submission deadline of November 10, 2026, at 5:00 PM. An optional pre-bid teleconference via Microsoft Teams is scheduled for October 28, 2026, at 1:00 PM CDT to review specifications and address bidder inquiries. Interested parties may contact Senior Procurement Specialist Bill Ruskamp for further information or clarifications regarding the contract requirements.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Perform Eddy Current Testing Services During Spring Unit 2 Outage (Gerald Gentleman Station)

Solicitation # Request for Proposal (RFP) No. 26081

Nebraska Public Power District is seeking proposals under RFP No. 26081 for eddy current tube testing services on selected components of Unit 2 at the Gerald Gentleman Station. The required work is scheduled to take place during the Spring Outage, running from March 26, 2027, through April 30, 2027. Interested bidders must submit their proposals by November 5, 2026, at 5:00 PM. An optional pre-bid meeting will be held on October 27, 2026, at 10:00 AM CDT in Sutherland, Nebraska, to review contract specifications. Prospective bidders intending to attend must notify Mindy Evans and Colin Flyr via email with their company representation details.

Testing Laboratories and Services

POSTED

DEADLINE

Sootblowing Air Compressor, Sheldon Station

Solicitation # Request for Bid (RFB) No. 26078

Request for Bid No. 26078 is an open solicitation issued by the Nebraska Public Power District for the design, fabrication, supply, and delivery of one multi-stage oil free centrifugal sootblowing air compressor and its corresponding drive motor. The equipment is intended for use at the Sheldon Station located near Hallam, Nebraska, and falls under the bid categories for soot blowing air compressors and electric motors. The bidding process is currently open, with a final submission deadline of October 21, 2026, at 4:00 PM. An optional pre-bid meeting will be conducted via Microsoft Teams on October 8, 2026, at 10:30 AM to review specifications and address bidder inquiries. Interested parties may contact Senior Procurement Specialist Bill Ruskamp for further information or clarifications regarding the contract requirements.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

in about 9 hours

2027 Distribution Line Tree Clearing and Brush Removal of Multiple Distribution Lines

Solicitation # Request for Bid (RFB) No. 26080

Request for Bid No. 26080 is issued by the Nebraska Public Power District to secure comprehensive vegetation management services for multiple distribution power lines in 2027. The contract covers all necessary labor, supervision, equipment, and materials required for tree trimming, brush removal, side trimming, cutting, chipping, mowing, and the application of herbicides. The scope of work also includes the mobilization and demobilization of resources and the proper disposal of all waste and debris. The bidding process is currently open, with a final due date of October 26, 2026, at 5:00 PM. An optional pre-bid meeting via Microsoft Teams is scheduled for October 7, 2026, at 11:00 AM CDT to review specifications and address bidder inquiries. Interested parties should refer to the bid categories for Tree Trimming and Vegetation Control Labor and contact Procurement Specialist Greg Trofholz for further information.

Landscaping Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS