Garrison Dam Spillway Modification Project - Phase 2 Anchor Testing

On or about 27 March 2025, this office will issue Request for Quote (RFQ) for Garrison Dam Spillway Modification Project - Phase 2 Anchor Testing located in McLean County, North Dakota. The solicitation will close on or about 15 April 2025. This solicitation is unrestricted. Project Description: The work in this project is to evaluate and design rock bar anchors in the Fort Union shale foundation to ensure the anchor production design is constructible, repeatable, and capable of resisting potential design loads. A secondary objective is to continue to refine understanding of site geotechnical properties. The following is a summary of major work tasks requested for this scope of work and presented in anticipated sequential order of work: 1. Laboratory testing. Samples from the drilling conducted by the government shall be provided to the contractor for laboratory testing and used to confirm anchor design scope assumptions. 2. Anchor bar acquisition. The contractor shall then mobilize to install anchors. All anchor bars must be fabricated and delivered as part of the award to ensure sufficient lead time is achieved. 3. Anchor bar installation. The contract shall perform drilling and anchor bar system installation in accordance with the anchor design scope assumptions. 4. Anchor field testing. Installed rock anchors shall undergo full-scale proof load, performance, and/or extended creep testing according to the testing requirements. The contractor shall develop a long-term monitoring system for anchors to monitor load loss, creep, and deformation of the stressed anchors which shall be capable of providing meaningful data for no less than 10 years. Site Visit: Please review solicitation for the details of the site visit date, time and RSVP information. Contracting Office Address: USACE Omaha District 1616 Capital Ave, Omaha, NE 68102-4901 NAICS Code: The Primary North American Industry Classification System (NAICS) code anticipated for solicitation is 541380 Testing Laboratories and Services. All contractors must be registered and have an active and verified account in the System for Award Management (SAM) in order to receive a contract award from any DoD activity. Contractors may access the Internet site at: https://www.sam.gov/ to register and/or obtain information about the SAM program. Contractors must ensure that the applicable NAICS code 541380 is included in their profile prior to submission of offer. Point Of Contact: The point of contact for this pre-solicitation notice should is Clinton Russell, who can be reached by email: contact@example.gov. Place of Performance: Riverdale, North Dakota Obtaining Solicitation Documents: Solicitation documents will be posted to the web via SAM.gov (https://sam.gov). Find solicitation announcement in SAM.gov (https://sam.gov). Use the - Contract Opportunities' to locate the project by entering the solicitation number. By using the - login' feature, it allows additional search features and allows you to keep your searches. Login might be required on some solicitations that are considered restricted. Once you have located your project, click on link to solicitation to view the project. Files may be downloaded from the column on the left side reading - Attachments/Links. Note: Offerors please be advised that an online registration requirement in System for Award Management (SAM) database http://www.sam.gov/ exists and directed solicitation provisions concerning electronic annual Representations and Certifications on SAM. Representations and certifications are required to be up-dated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective for one year from date of submission or update to SAM. Solicitation documents will be posted to the web via SAM.gov (sam.gov). Registration is required to access solicitation documents. SAM.gov provides secure access to acquisition-related information, synopsis or pre-solicitation notices and amendments.