Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Generator Maintenance, Inspection, and Repair

Open

State & Local

Response Deadline11/24/2026, 02:00:00 PM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing comprehensive maintenance, inspection, and repair services for generator systems at the Saratoga Station for prime contractors on California Department of Transportation projects. The selected contractor is responsible for supplying all necessary labor, parts, tools, and machinery to ensure the delivery of fully operational systems through both routine and non-routine service interventions. To be eligible, contractors must hold a valid C-10 Electrical Contractor license from the CSLB and maintain active DIR registration. Additionally, the provider must adhere to State General Prevailing Wage Rates across Monterey, San Luis Obispo, Santa Barbara, and Santa Clara counties. The performance of work is located in West Sacramento, with a response deadline set for November 24, 2026.

General Info

Generator maintenance and repair services at Saratoga Station for licensed, DIR-registered electrical contractors.

Agency

California Department of Transportation

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

West Sacramento, CA, 95605, USA

Set-Aside

NONE

Documents

This scope was carved out of 05A3060.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

IFB Routine and Non-Routine Generator Maintenance and Repair Services in Monterey, San Luis Obispo, Santa Barbara and Santa Clara Counties

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 24

Submission deadline

Response Deadline

11/24/2026, 02:00:00 PM PSTin 19 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia Department of Transportation

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs maintenance, inspection, and repair services for generators for prime contractors on Caltrans projects at Saratoga Station. Provides all labor, parts, tools, and machinery for routine and non-routine services. Requires a valid C-10 Electrical Contractor license from the CSLB and DIR registration. Must comply with State General Prevailing Wage Rates for Monterey, San Luis Obispo, Santa Barbara, and Santa Clara counties. Delivers fully operational generator systems.

Similar Contracts

Same NAICS industry code

26-140 Installation of Emergency Shut Off Switches

Solicitation # 26-140

Solicitation 26-140 is a subcontracting opportunity with Atterbury Job Corps Center and Adams & Associates, Inc., for the installation of emergency shut-off switches on power tools within the Facility Engineering Storage/Maintenance Shop in Edinburgh, Indiana. The scope of work requires the installation of two mushroom-head push-button emergency shut-off switches and a new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panel featuring a 60A shunt-trip main circuit breaker. All work must comply with OSHA, EPA, and FNC guidelines, as well as applicable state and local Indiana codes. Deliverables include the installed hardware, training, operating and maintenance manuals, and manufacturer product warranties. The procurement is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. A mandatory site visit was scheduled for November 10, 2026, with a proposal deadline of November 20, 2026. Bidders must submit a single lump sum contract bid with a detailed cost breakdown, a timeline for substantial completion, and a minimum 90-day bid guarantee. Award will be based on best value, evaluated by price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Contractors must hold a valid Indiana Contractor's License and provide proof of automobile liability, general liability, and workers compensation insurance. Compliance with Davis-Bacon Act wage rates is required, and subcontractors must inform employees of minimum wage requirements per FAR 52.222-41(g). Payment terms are Net 30. Final acceptance is contingent upon a successful walk-through, correction of punch list items within 14 days, and the submission of a completed SF 1413, certified payroll records, and lien releases. Workmanship is guaranteed for one year from the date of substantial completion.

Atterbury Job Corps. – Adams & Associates

POSTED

about 7 hours ago

DEADLINE

NC Global TransPark Phase 2

Solicitation # nc-global-transpark-phase-2

Ace Electric is seeking WMBE subcontractors for the NC Global TransPark Phase 2 project in North Carolina. The scope of work involves the addition of an airplane hangar and three support buildings, specifically requiring subcontractors specializing in fire alarms, data, and security under NAICS code 238210. The project is scheduled to commence in the spring of 2027 with an estimated duration of 15 months. Interested parties should coordinate with Thomas Jeffords or Chris Mitchell to discuss bidding opportunities.

Ace Electric, Inc.

POSTED

about 7 hours ago

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The scope of work is divided into three primary areas: conducting visual and infrared thermographic inspections on energized transformers under typical load, installing standardized external oil sampling devices to improve safety and access, and performing comprehensive oil testing analysis. Additionally, the selected contractor will evaluate nitrogen blanket systems, provide on-site training for up to 20 agency staff members on inspection tools, and develop standard operating procedures for oil replacement and maintenance. All work must adhere to NETA MTS, IEEE, NFPA 70E, and ASTM D923 standards, with infrared inspections performed by ASNT Level 1 certified technicians or higher. The agency intends to make a single award to the most capable offeror based on their past performance, staffing plan, personnel availability, fee structure, and any exceptions taken to contract terms. Qualified bidders must have completed at least two similar projects within the last five years, including at least one for a utility or industrial facility. Proposals must be submitted electronically via PlanetBids by December 23, 2026, and must include a detailed project approach, company profile, and various required forms such as a non-collusion statement and workers compensation certificate. The resulting contract will utilize fixed pricing with a not-to-exceed total cost, and payments will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.

Inland Empire Utilities Agency

POSTED

about 7 hours ago

DEADLINE

in about 2 months

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Eastern Municipal Water District's Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility Project in California. The scope of work is divided between the San Jacinto Valley Advanced Water Purification Facility and the Brine Ponds, specifically requesting subcontractors for low voltage systems, fiber optics, and electrical materials and supplies. Bids must be submitted to Ryan Falk by 2:00 PM on November 18, 2026, with a final deadline of November 19, 2026. Non-SBE/DBE firms may be considered if they provide information regarding lower-tier SBE/DBE participation. Qualified bidders must be registered to perform public work pursuant to Labor Code Section 1725.5 and must agree to the terms of Axia's Standard Long Form Subcontract or Purchase Order and the AGC Master Labor Agreements. Minimum insurance requirements include 5 million dollars in excess liability, 1 million dollars for auto liability, 1 million dollars for workers compensation and employer liability, and general liability coverage of 1 million dollars per occurrence, 2 million dollars aggregate, and 2 million dollars for completed operations. All proposers are bound by the prime contract terms and conditions, including all payment provisions.

POSTED

about 7 hours ago

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves the inspection, repair, and certification of emergency lighting systems to ensure full compliance with NFPA 101 (2024 Edition), NFPA 70, and OSHA safety regulations. Key deliverables include the application of durable tracking labels to all tested fixtures, the provision of manufacturer and installer warranties, and certificates of disposal for any hazardous materials. The estimated contract value ranges between $25,000 and $100,000, with specific focus areas including the cafeteria, education center, recreation area, and men's and women's dormitories. Bids are due by December 1, 2026, and will be awarded based on overall best value. Mandatory requirements for submission include a physical site visit, a signed bid form, and a detailed cost breakout on company letterhead. For bids equal to or greater than $25,000, contractors must provide a bid bond of 20% of the base bid, as well as performance and payment bonds from a surety company with at least an A- rating. The contract is subject to the Davis-Bacon Act, Federal Contractor Minimum Wage requirements, and FAR regulations regarding small business subcontracting, Buy American preferences, and records management. Awardees must provide a 12-digit Unique Entity ID and adhere to strict labor standards, including paid sick leave and overtime compensation.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 7 hours ago

DEADLINE

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

This solicitation, identified as ASO-1489-00, involves the construction and installation of Distance Measuring Equipment (DME) to be collocated with the Runway 15 Localizer at Charleston International Airport in South Carolina. Managed by Parsons, the project falls under NAICS code 238210 and is specifically designated as a set-aside for various small business types, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of November 27, 2026. The primary point of contact for this opportunity is Quentin Wack. This project represents a targeted effort to enhance aviation infrastructure at the Charleston facility through specialized technical installation.

POSTED

about 7 hours ago

DEADLINE

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a diverse range of facility maintenance and construction projects located in Louisiana. The scope of work encompasses electrical repairs and grounding system updates, roofing installation, plumbing replacements, grading work, painting, and door repairs. The estimated construction value for this project is projected to be between 500,000 and 1,000,000 dollars. The opportunity is designated as a small business set-aside, welcoming bids from Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 16, 2026. The project falls under NAICS code 238210, and primary coordination is handled by Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 7 hours ago

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with a DME antenna, associated foundations, junction box, meter rack, underground conduit, grounding, and conductors. This opportunity is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by December 30, 2026.

Parsons Corporation

POSTED

about 7 hours ago

DEADLINE

in about 2 months

FRSMP277009/JLM-Lighting Phase 2

Solicitation # WMATA-0000010972

The Washington Metropolitan Area Transit Authority is seeking proposals for solicitation WMATA-0000010972, titled FRSMP277009/JLM-Lighting Phase 2. This project falls under NAICS code 238210, which pertains to electrical contracting and related lighting services. The solicitation was posted on November 5, 2026, and requires all responses to be submitted by the deadline of December 2, 2026, at 7:00 PM. Interested parties can find further details and submission guidelines through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

about 7 hours ago

DEADLINE

Fire Alarm and Smoke Control System Maintenance TechnicianThis subcontract opportunity is for a Fire Alarm and Smoke Control System Maintenance Technician to support prime contractors on California Department of General Services facility projects in Sacramento. The selected provider will be responsible for performing quarterly preventive maintenance and annual comprehensive testing of fire alarm, voice evacuation, and smoke control systems. All work must be conducted in accordance with NFPA 72 and Title 24 Chapter 9 standards, specifically covering the inspection of smoke and heat detectors, annunciators, and sprinkler switches. To qualify for this role, technicians must be certified and the company must maintain valid DIR registration. Key deliverables include the submission of detailed quarterly and annual inspection reports along with full system verification. Interested parties must respond by December 1, 2026, under NAICS code 238210.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

WebCTRL and Automated Logic Systems TechnicianThis subcontract opportunity is for a WebCTRL and Automated Logic Systems Technician to provide specialized technical services for prime contractors working on Alabama Department of Corrections projects. The scope of work involves the installation, configuration, and maintenance of WebCTRL and Automated Logic systems, specifically focusing on the installation and commissioning of BAS controllers, software configuration, and system diagnostics to ensure the delivery of fully operational systems. Qualified candidates must hold manufacturer certification by Automated Logic to perform these duties. The project falls under NAICS code 238210 and is managed by the Alabama Department of Corrections Engineering division. Interested parties should note the response deadline of November 10, 2026.

Department Of Corrections, Engineering

POSTED

about 8 hours ago

DEADLINE

Industrial Equipment Installation ServicesThis subcontract for Industrial Equipment Installation Services involves the physical installation and connection of parts washers and recyclers at various Illinois Department of Transportation facility projects. The scope of work includes unloading equipment, positioning units in designated areas, and ensuring all units are connected to electrical power. To ensure safety and compliance, licensed electricians must perform all hard-wiring, and all personnel must strictly adhere to facility safety protocols to deliver fully operational equipment at each District location. Managed by the Illinois Finance and Administration agency under NAICS code 238210, the solicitation was posted on November 5, 2026. Interested parties must submit their responses by the deadline of November 20, 2026, at 4:00 PM.

FINADMIN494 - Finance & Administration

POSTED

about 9 hours ago

DEADLINE

More opportunities from California Department of Transportation

Same awarding agency

IFB Routine and Non-Routine Generator Maintenance and Repair Services in Monterey, San Luis Obispo, Santa Barbara and Santa Clara Counties

Solicitation # 05A3060

The California Department of Transportation (Caltrans) is soliciting bids for Invitation for Bid (IFB) 05A3060 to provide routine and non-routine generator maintenance, inspection, and repair services across Monterey, San Luis Obispo, Santa Barbara, and Santa Clara counties. The scope of work is divided into quarterly routine services, including lubrication and electrical testing; annual routine services, such as load testing and filter replacement; and non-routine services for immediate repairs. The contract is a public works agreement subject to State General Prevailing Wage Rates and Labor Code Sections 1720-1861. The total bid proposal must not exceed $484,000.00, and the agreement will be awarded to the lowest responsive and responsible bidder. Bidders must submit physical bids via mail or hand-delivery to the Division of Procurement and Contracts in Sacramento by November 24, 2026; electronic submissions are not accepted. Required documentation includes a bid proposal, certification sheets, and valid registration with the Department of Industrial Relations. Preferences are available for certified Small Businesses and Disabled Veteran Business Enterprises, with a combined incentive cap of $100,000. Successful contractors must provide a payment bond for any service request valued at $25,000 or more and must adhere to strict invoicing requirements, including the submission of certified payroll records. All work is subject to final inspection and approval by the Caltrans Contract Manager.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 22 hours ago

DEADLINE

Gate Operator Replacement Services in Shasta County

Solicitation # 02A2557

The California Department of Transportation (Caltrans) is soliciting bids for solicitation number 02A2557 to provide gate operator replacement services at the District 2 Office Complex in Redding, Shasta County. The contractor is required to furnish all labor, equipment, tools, materials, and travel necessary to remove and legally dispose of six existing automatic vehicle gate operators and components, and subsequently install and test six new operators. All work must be performed during normal business hours, Monday through Friday, and must adhere to industry standards, local building codes, and manufacturer recommendations. The total bid proposal must not exceed a ceiling of $484,000.00, and the award will be granted to the lowest responsible bidder. To be considered responsive, bidders must possess a valid C-61/D-28 Doors Gates; Activating Devices license and current registration with the Department of Industrial Relations. Required submission documents include the Bid Proposal (ADM-1412), Bidder Certification Sheet (DOT ADM-1416), Non-Collusion Declaration, and certifications regarding California Civil Rights Laws and the Darfur Contracting Act. Bids must be mailed or hand-delivered to Shannon Miller in Sacramento by November 24, 2026, at 2:00 PM. The contract includes several strict compliance requirements, including the application of State General Prevailing Wage Rates for Shasta County and a prohibition on subcontracting. Successful bidders with contracts valued at $25,000 or more must provide a payment bond for 100 percent of the total account payable. Small Business (SB), Microbusiness (MB), and Small Business for Public Works (SB-PW) certified contractors may be eligible for a five percent preference, capped at $50,000. Invoices must be submitted monthly in arrears in triplicate and must be accompanied by certified payroll records and a DVBE utilization report to avoid payment withholdings.

Other Building Equipment Contractors

POSTED

about 22 hours ago

DEADLINE

Scrap Metal Recycling Services in Monterey, Santa Cruz, and San Benito Counties

Solicitation # 05A3057

The California Department of Transportation (Caltrans) is soliciting bids for Invitation for Bid 05A3057 to provide on-call scrap metal collection, removal, and recycling services across Monterey, Santa Cruz, and San Benito Counties. The contract is estimated to run from December 1, 2026, through November 30, 2029, with services performed at maintenance stations in Salinas, Santa Cruz, and Hollister. This is a revenue contract, meaning the contractor does not charge a service fee but instead pays Caltrans a percentage of the scrap sale proceeds for ferrous and non-ferrous metals. Payments must be submitted by the 15th of each month following delivery, accompanied by electronic tonnage reports, weight tickets, and American Metal Market pricing sheets. To be eligible, bidders must possess a valid DMV Motor Carrier Permit and a CDFA Weighmaster License. The contractor is responsible for providing lockable steel containers marked Recyclable Metal Only, ensuring they are covered during inclement weather, and legally disposing of any non-scrap debris at no cost to the state. Award will be granted to the lowest responsive and responsible bidder, with preferences available for certified Small Businesses, Micro Businesses, and Disabled Veteran Business Enterprises. Required insurance includes Commercial General Liability, Automobile Liability, and Workers Compensation. Bids must be mailed or hand-delivered by November 19, 2026, at 2:00 p.m. PT.

Recyclable Material Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Access Control System Configuration (Comelit PAC)This subcontract involves providing specialized technical configuration and software support for Comelit PAC access control systems on Caltrans facility projects in Shasta. The selected contractor will be responsible for programming software to recognize and operate six new gate operators and conducting comprehensive testing to ensure a seamless software-to-hardware communication loop. The final deliverable is a fully configured and functioning software interface that effectively controls the gate operators. Qualified candidates must possess proven experience or official certification with Comelit PAC systems to be eligible. The opportunity was posted on November 4, 2026, with a response deadline of November 24, 2026. This project falls under NAICS code 561621 and is intended for prime contractors working on California Department of Transportation initiatives.

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

Supply of Automatic Gate Operators and HardwareThis subcontract involves the procurement and delivery of six automatic vehicle gate operators and all necessary mounting brackets and fasteners for the California Department of Transportation. The equipment must be compatible with Comelit PAC access control systems and delivered to the District 2 Office Complex in Shasta. All components are required to be provided in new, unopened original manufacturer packaging. The solicitation was posted on November 4, 2026, with a response deadline of November 24, 2026. Classified under NAICS code 423830, the contract focuses on supplying essential hardware to prime contractors managing Caltrans facility projects.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Automatic Vehicle Gate Operator Installation and IntegrationThis subcontract involves the installation and integration of automatic vehicle gate operators for Caltrans facility projects located in Shasta County. The scope of work requires the removal of six existing operators and the installation of six new rolling gate operators, which must be integrated with existing loops and Comelit PAC access control equipment. The final deliverable is a fully operational, tested, and ADA-compliant automated gate system. Qualified contractors must hold a C-61 license with a D classifier and adhere to State General Prevailing Wage Rates. The solicitation was posted on November 4, 2026, with a response deadline of November 24, 2026. This project falls under NAICS code 238990 and is managed through the California Department of Transportation.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Metal Recycling and ProcessingThis subcontract for Metal Recycling and Processing supports prime contractors on California Department of Transportation maintenance station projects in Monterey. The scope of work involves the processing and recycling of ferrous and non-ferrous metals, specifically steel, iron, copper, aluminum, and lead, utilizing industrial shredders and balers to prepare scrap materials for market sale. The contractor must ensure strict adherence to waste disposal regulations, including Senate Bill 1383 and Public Resources Code sections 42652 et seq. This opportunity was posted on November 4, 2026, with a response deadline of November 19, 2026, falling under NAICS code 423930.

Recyclable Material Merchant Wholesalers

POSTED

DEADLINE

Scrap Metal Container Supply and MaintenanceThis subcontract with the California Department of Transportation involves the supply and ongoing maintenance of specialized scrap metal containers for prime contractors working on maintenance station projects. The provider is responsible for delivering 40-cubic yard steel containers equipped with steel wheels and rainproof covers to ensure operational efficiency during inclement weather. These containers must be serviced regularly to remain functional and free of graffiti. The scope of work specifically covers deliveries and maintenance for stations located in Salinas, Santa Cruz, and Hollister, with the primary place of performance centered in Monterey. Interested parties should note the response deadline of November 19, 2026, for this project categorized under NAICS code 332312.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Scrap Metal Collection and Hauling ServicesThis subcontract for Scrap Metal Collection and Hauling Services involves the collection, removal, and transportation of ferrous and non-ferrous scrap metals for prime contractors working on California Department of Transportation maintenance station projects in Monterey. The selected provider must be capable of fulfilling on-call requests within two business days, utilizing trucks and forklifts to transport materials to recycling facilities and ensuring all loads are weighed on certified public scales. To qualify for this engagement, the contractor must possess a California DMV Motor Carrier Permit and a CDFA Weighmaster License. The solicitation was posted on November 4, 2026, with a response deadline of November 19, 2026. This opportunity falls under NAICS code 484220 and is managed through the CalProcure system.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Waste Disposal and Landfill ServicesThis subcontract for Waste Disposal and Landfill Services supports prime contractors on California Department of Transportation projects at the Indio Maintenance Station in Riverside. The selected provider is responsible for accepting waste deliveries, utilizing certified scales to accurately determine tonnage, and processing all materials in strict accordance with California environmental laws and SB 1383. To qualify for this engagement, the provider must hold a valid licensed waste disposal site operator license. Key deliverables include the professional disposal of waste and the provision of official weight tickets and receipts for all incoming loads. Interested parties must respond by November 19, 2026.

Solid Waste Landfill

POSTED

DEADLINE

Scheduled and On-Call Trash Collection and HaulingThis subcontract for the California Department of Transportation involves providing scheduled and on-call waste collection and hauling services for prime contractors at the Indio Maintenance Station in Riverside. The selected provider is responsible for supplying and maintaining trash bins, performing regular weekday pickups, and managing hauling requests during weekends and holidays. All collected waste must be transported to licensed facilities, with the contractor providing monthly itemized invoices and corresponding tonnage receipts. To qualify, the contractor must hold a valid California DMV Motor Carrier Permit and ensure full compliance with SB 1383 and Title 14 CCR regulations. This opportunity falls under NAICS code 562111, with a response deadline set for November 19, 2026.

Solid Waste Collection

POSTED

DEADLINE

IFB 56A0921 Maintenance and Repair of the Transportation Management Systems (TMS) Elements and Communications Infrastructure in Alpine, Amador, Calaveras, Mariposa, Merced, San Joaquin, Stanislaus, and Tuolumne Counties.

Solicitation # 56A0921

The California Department of Transportation (Caltrans) is soliciting bids under IFB 56A0921 for the routine and non-routine maintenance and repair of Transportation Management Systems (TMS) elements and communications infrastructure. The scope of work covers the outside cable plant, including physical cabling, conduit, cabinets, and poles, across Alpine, Amador, Calaveras, Mariposa, Merced, San Joaquin, Stanislaus, and Tuolumne Counties. The estimated period of performance runs from December 21, 2026, through December 20, 2029. The total bid proposal is capped at 484,000.00 dollars, and any bid exceeding this amount will be rejected. Award will be based on the lowest responsive and responsible bid, with price incentives available for verified Disabled Veteran Business Enterprise (DVBE) participation. Minimum qualifications for bidders include current registration with the Department of Industrial Relations (DIR) and possession of valid C-10, Class B, C-20, or C-31 contractor licenses. Bidders must submit physical, sealed proposals by November 19, 2026, at 2:00 PM; electronic submissions are not accepted. The contract requires strict adherence to state general prevailing wage rates, specific fiber optic packaging and labeling standards, and the submission of monthly invoices with detailed work summaries and labor compliance documentation.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS