This Solicitation opportunity from Tennessee was posted on May 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Generator Maintenance - Middle TN - TEMA

Closed

34101-13910State & Local

Submission Closed06/03/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, as well as resurfacing the flywheel and replacing hydraulic pipes and filters as necessary. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This is a fee-for-service contract awarded on a best-value basis, with a response deadline of November 3, 2026. The solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Applicants must submit a bid sheet, proof of insurance, a completed supplier packet including Form W-9, and a self-certification form. The contract is subject to various Federal Acquisition Regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31 for Kentucky, and strict requirements regarding the security of non-public information and the prevention of trafficking in persons.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 27, 2026, and requires all responses to be submitted by the deadline of November 4, 2026, at 7:00 PM. Interested parties can access further details and submit their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES

Solicitation # 2026-RFP-130

Lakeland Electric is soliciting proposals under RFP 2026-RFP-130 to establish a pool of qualified contractors for the annual inspection, testing, repair, reconditioning, and storage of critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of assets, including low- and medium-voltage AC/DC electric motors and circulating water and condensate pumps. Required services include clean inspection tests, troubleshooting, motor rewinding, dynamic field balancing, laser alignment, and vibration analysis. Additionally, the selected contractors must provide logistics support, including pickup, delivery, and secure indoor storage with ongoing preservation activities such as shaft rotation and lubrication. Proposals are due by 3:00 pm on October 30, 2026, via the OpenGov portal. Award decisions will be based on a 100-point scoring system evaluating pricing (30%), qualifications and experience (25%), technical and facility capabilities (25%), service approach and response (15%), and past performance (5%). Mandatory submittals include a signed W-9, Florida Sunbiz registration, a notarized Hold Harmless Indemnification Agreement, and a Human Trafficking Affidavit. Contractors must adhere to strict safety standards, including OSHA regulations for crane operations and powered industrial trucks, and must certify compliance with drug-free workplace and suspension and debarment regulations.

LE - Production - MPP

POSTED

DEADLINE

Airport Baggage Handling System

Solicitation # PUR-RFP2026.08.10068

The City of San Jose is seeking responses from qualified vendors for an Airport Baggage Handling System under solicitation number PUR-RFP2026.08.10068. All proposals must be submitted electronically via Biddingo by December 4, 2026, at 12:00 PM PT. The contract will be awarded based on a best value evaluation rather than price alone, and preference may be given to Local and Small Business Enterprises that maintain an office in Santa Clara County and hold a valid City of San Jose Business Tax Certificate. Vendors are instructed to exclude sales tax from their initial responses, as the city will determine the applicable tax upon award. It is important to note that any quantities provided in the solicitation are estimates and are not guaranteed, meaning variations in volume will not justify adjustments to unit pricing or rates. Further details and required documentation are available through the official solicitation documents and the Biddingo platform.

City of San José - Purchasing

POSTED

DEADLINE

Laboratory Instrument Installation and CalibrationThis subcontract, titled Laboratory Instrument Installation and Calibration, involves the physical installation, setup, and calibration of the THW-L1S system for prime contractors supporting NASA Marshall Spaceflight Center projects. The scope of work includes transporting and positioning equipment within Lab 105E of Building 4205, establishing power and temperature control connections, and performing precise calibrations for volumetric specific heat and thermal conductivity measurements. Managed by the NASA Shared Services Center under NAICS code 811310, the project requires personnel with specific security clearance for access to Building 4205. The final deliverable is a fully commissioned and calibrated system. The solicitation was posted on October 27, 2026, with a response deadline of October 30, 2026.

NASA Shared Services Center

POSTED

DEADLINE

Inspection, Testing, and Repair of Rosemount Model 6888 Oxygen Sensors

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Forklift and Utility Vehicle Safety & MaintenanceThis subcontract opportunity involves providing specialized safety inspections and routine maintenance for forklifts and utility vehicles at the Golden Gate National Cemetery in San Bruno, California. Working under prime contractors for the National Cemetery Administration within the Department of Veterans Affairs, the selected provider will perform rigorous safety system checks and operational compliance inspections utilizing forklift-specific checklists and testing tools to ensure all equipment meets strict safety standards. The project requires certified technicians with proven experience in forklift safety standards to deliver detailed, certified safety inspection reports. This opportunity falls under NAICS code 811310, with a response deadline set for November 3, 2026.

National Cemetery Administration (36C786)

POSTED

DEADLINE

Heavy Equipment Preventative & Corrective MaintenanceThis subcontract for Heavy Equipment Preventative and Corrective Maintenance supports prime contractors on National Cemetery Administration projects at the Golden Gate National Cemetery in San Bruno, California. The scope of work involves providing certified mechanics to perform on-site diagnostic services and preventative maintenance for heavy equipment, including dumpers, loaders, and mini excavators. Key technical requirements include oil and filter changes, fluid and lubrication services, battery testing, and comprehensive system inspections of electrical, hydraulic, drivetrain, and engine components to ensure all machinery remains fully operational. The opportunity is categorized under NAICS code 811310 and is associated with the Department of Veterans Affairs. Interested parties must adhere to the response deadline of November 3, 2026. The primary objective of the contract is the delivery of maintained and operational heavy equipment to ensure the continuity of cemetery administration projects.

National Cemetery Administration (36C786)

POSTED

DEADLINE

Specialized NDT (Non-Destructive Testing) ServicesThis small business set-aside subcontract involves providing specialized non-destructive testing services for Department of the Army UH-60 helicopter projects. The contractor is responsible for detecting cracks, corrosion, and catastrophic damage using ultrasonic equipment and inspection kits through methods such as X-ray, Magnetic Particle, and Dye Penetrant testing. All work must be performed by personnel holding NAS410 or equivalent certification to ensure the delivery of accurate inspection reports and airworthiness certifications. Managed by the Department of Defense under agency W6QK Acc-Rsa, the opportunity falls under NAICS code 811310. Interested parties must submit their responses by the deadline of December 1, 2026.

POSTED

DEADLINE

Radiator Core & Heat Exchanger RepairThis small business set-aside subcontract, managed by the Department of Defense agency W6QK Acc-Rsa, involves specialized repair, cleaning, and refurbishment of radiator cores and heat exchanger elements. The work supports prime contractors on Department of the Army UH-60 helicopter projects to ensure components meet continued airworthiness standards. Technical requirements include chemical cleaning, pressure leak testing using specialized rigs, brazing, soldering, and fin straightening. The opportunity is categorized under NAICS code 811310 and was posted on October 27, 2026, with a response deadline of December 1, 2026. The selected contractor will be responsible for utilizing industrial cleaning solvents and pressure testing equipment to deliver fully refurbished heat exchangers and radiator cores.

POSTED

DEADLINE

Preventative Maintenance and Repairs

Solicitation # W911KF27QA006

This sole source procurement, solicitation number W911KF27QA006, is awarded to Phillips Corporation for the provision of preventive maintenance and repair services for Haas Computer Numerical Controlled machines. The work will be performed at the Anniston Army Depot in Alabama under the Department of Defense. The presolicitation was posted on October 22, 2026, with a response deadline of December 3, 2026. While this specific action is sole sourced, other organizations possessing the required capabilities may submit written evidence to the contracting officer to be considered for future procurement opportunities.

POSTED

DEADLINE

Material Handling Equipment (MHE) Repair Services

Solicitation # N0018927QL011

Navsup Flt Logistics Ctr Norfolk

POSTED

about 18 hours ago

DEADLINE

in 9 days

AI Contract Overview

This contract opportunity is a solicitation from the Tennessee Emergency Management Agency through the Tennessee Military Department for a three-year term to provide generator maintenance services in Middle Tennessee, specifically in Nashville. The contract aims to establish a fixed-term agreement for the provision of products and services related to generator upkeep, with pricing and specifications detailed in the attached documents. Interested vendors must review the entire bid package, including all terms, conditions, specifications, and price sheets, and submit their responses by the June 3, 2026 deadline. Vendors are encouraged to maintain and update their profiles on the Edison Supplier Portal, as it is essential for bid submission and communication. Support is available through the Edison Help Desk for navigating the system. Site visits and inquiries must comply with the dates specified in the bid documents. Primary communication is directed to Sharon Pope at the Tennessee Military Department, with additional assistance from the Central Procurement Office. The solicitation is posted on the state procurement website, where vendors can log in using their credentials to access and respond to the bid.

General Info

Three-year contract for generator maintenance in Nashville; bids due June 3, 2026.

Agency

Tennessee Military Department

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

MILITARY PROCUREMENT OFFICE, 3041 SIDCO DRIVE, DOCK 154, NASHVILLE TN 37204, NASHVILLE, TN, 37204, USA

Set-Aside

NONE

Documents

Event 13910 Generator Maintenance Evaluation Model - Middle TN

evaluation-model

High

Generator Maintenance - Middle TN - TEMA RFX 34101-0000013910

rfq

High

ITB Event 13910 Generator Maintenance Middle TN TEMA

itb

High

ITB Event 13910 Generator Maintenance Middle TN TEMA

itb

High

TEMA Emergency Generators Maintenance Specifications - Sourcing Event 13910

specifications

High

Event 34101-13910 Generator Maintenance and Trip Charges Info

other

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 13

Solicitation

Response DeadlineJun 3

Deadline has passed

Submission Closed

06/03/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTennessee Military Department

Contacts2 people available

OfficeTN, USA

Organization / AgencyTennessee Military Department

Office AddressTN, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Central Procurement Office

contact@example.gov

Full Description

This event is to bid for a three (3) year contract for Tennessee Emergency Management Agency. Specifications and terms & conditions are attached. Agency Contact: contact@example.gov or +1 (555) 000-0000. See terms and conditions for site visit and questions due dates. READ THE ENTIRE BID, including the Event Details, Specifications, and Terms and Conditions and any other attachments. The purpose of this Invitation to Bid Event/Source of Supply Event is to establish a term contract (s) to provide: The State of Tennessee, with products and/or services as described in the attached terms, conditions, specifications and price sheet. A term contract means a contract in which a source or sources for supply are established for a specified period of time at an agreed upon price(s). If the Review and bid on this event link included in the e-mail notification does not work, please go to https://www.tn.gov/generalservices/procurement/central-procurement-office--cpo-/supplier-informa tion.html Click on the link that says Bid Opportunities and log in with your vendor ID and password. NOTE: Need help with EDISON? Call the Edison HELP Desk at +1 (555) 000-0000 or +1 (555) 000-0000 Please do not wait until the last day to POST YOUR BID. The Edison system will sign you out after 30 minutes of inactivity. Your password expires EVERY 90 DAYS. It is the responsibility of the Edison User (bidder/vendor) to maintain their own profile information (Email address, phone numbers, address or contacts) and to continue to keep it current by logging into the Supplier Portal and making changes as needed. Supplier Portal link: https://supplier.edison.tn.gov/ (Maintain supplier information) Central Procurement Office Website: https://www.tn.gov/generalservices/procurement.html The website is constantly being updated with information to assist the agencies and vendors; you are encouraged to visit the website frequently.