Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Generator Supply & Installation (CARB-Compliant)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply and installation of a 5300W generator that meets California Air Resources Board (CARB) compliance standards, designed to be a Honda-equivalent unit integrated directly into a vehicle’s existing power system for emergency operational use. The generator must be fully compatible with the vehicle’s electrical architecture to ensure seamless power delivery during critical scenarios, with emphasis on reliability, emissions compliance, and minimal environmental impact. Installation must be performed to industry-standard protocols to maintain vehicle warranties and operational integrity. This subcontract is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required at Stennis Space Center, Mississippi, 39529. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026, at 7:00 PM Eastern Time. The North American Industry Classification System code 333111 indicates the scope falls under generator manufacturing and related equipment production. The contract is not subject to any specific set-aside designation, and while no point of contact is provided, all submissions must adhere to the terms outlined in the SAM.gov posting.

General Info

Supply and install a CARB-compliant 5300W Honda-equivalent generator for vehicle integration at Stennis Space Center.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

333111 - Farm Machinery and Equipment ManufacturingView NAICS

Place of Performance

Stennis Space Center, MS, 39529, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
ContactsNo contacts available
OfficeN/A
Organization / Agency
National Aeronautics And Space Administration → NASA Shared Services Center
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and installation of a 5300W CARB-compliant generator (Honda-equivalent) integrated into the vehicle’s power system for emergency operations.

Similar Contracts

Same NAICS industry code

NAICS: 333111
New
Federal
Aircraft Towing TractorThe solicitation W912JM26QA016 seeks a single Aircraft Towing Tractor capable of safely pushing and pulling both UH-72 Lakota and UH-60 Black Hawk helicopters, with performance requirements centered on operational compatibility and environmental protection. The tractor must have a minimum push capacity of 7,900 pounds, be equipped with R3 Turf or R4 Industrial tires to prevent damage to epoxy flooring, feature a dealer-modified front grille guard with a welded steel receiver and 15-ton pintle hook hitch, and utilize a hydrostatic transmission for precise low-speed maneuvering. The equipment must not include a Diesel Regen System, and delivery is required by September 1, 2026, to the designated destination at 1000 Halsey Avenue, Building 447, Marietta, Georgia, under FOB Destination terms, with the contractor responsible for all transportation costs and risk of loss. The solicitation is structured as a Firm Fixed Price contract with no options, and pricing information has not been provided in the solicitation documents. This is a total small business set-aside under FAR 19.5, with evaluation factors prioritized as Technical, Past Performance, and Price in that order, and award will be made based on best value rather than lowest price technically acceptable. Technical evaluation focuses on delivery timeline and equipment specifications, while past performance is assessed for similarity of scope and contractor role in prior contracts. Price must be deemed reasonable under FAR 31.201-3, with offers eliminated if deemed unreasonably high, unrealistically low, unbalanced, or technically unsupported. The Government will conduct inspection and acceptance at the delivery site, with compliance verified against documented salient characteristics. All invoices must be submitted via Wide Area WorkFlow (WAWF), and no alternative invoicing methods are permitted. Clause deviations under 2026-O0038 apply to multiple FAR and DFARS provisions, including security prohibitions, contracting with inverted domestic corporations, sustainable product requirements, and trafficking in persons, along with mandatory compliance with Buy American, prohibited country sourcing restrictions, and bans on covered defense telecommunications equipment from certain foreign entities. Offerors must submit two volumes via email by the deadline—Technical Proposal detailing equipment and delivery timeline, and Past Performance with relevant contract references—using specified file naming conventions and sending copies to two designated points of contact, with submission confirmation the contractor’s responsibility.
W7M3 Uspfo Activity Ga Arng

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 333111
New
Federal
FWS GRAND COTE NWR - POWER UNITThe U.S. Fish and Wildlife Service is soliciting a single Rainbow John Deere 6068HF Tier 3 diesel power unit, rated between 485 and 225 HP, to support water-management pump systems at the Central Louisiana Refuge Complex, located at 401 Island Road, Marksville, LA 71351. This solicitation, numbered 140F1S26Q0080, is issued as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete. The contract is anticipated to be awarded on a Lowest Price Technically Acceptable basis, where proposals must first pass mandatory technical and past performance evaluations—technical compliance being non-negotiable and past performance requiring no terminations for cause in the prior three years—before price becomes the sole determinant of award. The offeror must deliver the complete OEM-spec unit, including all required accessories such as the battery kit, clutch/PTO, drive flange, cabinet, and muffler kit, along with manufacturer manuals and warranty documentation, within 60 days of contract award under FOB Destination terms, meaning the vendor assumes all risk and cost until delivery at the refuge site. The contract requires compliance with multiple Federal Acquisition Regulation clauses, including Buy American and trade agreement provisions, electronic payment via the Invoice Processing Platform, and standard labor and protest clauses. A deviation in FAR 52.233-4 indicates an alternate version of the applicable law clause is in effect, while security-related clauses such as 52.240-91 and 52.222-90 impose additional obligations on contractor conduct regarding data sharing and non-discrimination. Packaging and labeling must include “UNITED STATES GOVERNMENT,” the agency title, contract number, gross weight, estimated value, and duty-free notation, though no specific packaging materials, preservation methods, or bar-coding standards are mandated. All submissions must be sent electronically via email to the contracting officer, Lorenzo Aragon, by 5:00 PM EDT on July 29, 2026, with questions due by July 27, 2026. No contract value is stated, as pricing is sought from responders, and all payments will be processed electronically through the IPP system. The awardee must maintain active SAM registration, confirm small business status, and comply with post-award representations, including re-representation before any
It Services Fws

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 332710
New
Federal
The contractor shall provide machining services for approximately 250 Government-furnished GRX-810 additive manufactured (AM) tensile blanks in accordance with the attached drawings and specifications. The Government will furnish the GRX-810 blanks. The cThe contractor is required to provide machining services for approximately 250 Government-furnished GRX-810 additive manufactured tensile blanks in strict accordance with provided drawings and specifications. GRX-810 is a nickel-based superalloy exclusively furnished by the Government and may not be substituted or procured by the contractor under any circumstance. All work must be completed and delivered to NASA Glenn Research Center in Cleveland, Ohio, within a lead time of twelve weeks or less, with delivery terms specified as FOB Destination, meaning risk of loss and title transfer occur upon arrival at the destination. The contract is a Firm-Fixed-Price award under a Total Small Business Set-Aside using the Lowest Price Technically Acceptable (LPTA) evaluation method, where offers must be technically acceptable to be eligible for award, and the lowest-priced compliant offer will be selected. Offerors must submit their bids via email to Shanna L. Patterson at Shanna.l.Patterson@nasa.gov, clearly referencing the solicitation number 80NSSC26938931Q in the subject line, and include their CAGE/UEI code, FOB destination, lead time for delivery, and point of contact name and email. Payment will not be made by credit card and is subject to Government payment procedures. The contractor must comply with all applicable export control regulations including ITAR and EAR, particularly regarding access to controlled technical data at the delivery site by foreign persons, and obtain necessary export licenses in advance. Duty-free entry provisions under FAR 52.225-8 apply if foreign-sourced supplies exceed $20,000 in value, requiring advance notification to the Contracting Officer, proper marking of packages with “UNITED STATES GOVERNMENT” and agency title, inclusion of shipping documents, and adherence to customs regulations under 19 CFR Part 142. The contractor must maintain complete records of export compliance and flow down applicable clauses to subcontractors. All deliveries must be properly documented with the contract number, delivery address, carrier details, and notation of duty-free entry. The contracting office is the NASA Shared Services Center located at Stennis Space Center, Mississippi, and only small business entities registered in SAM.gov with accurate CAGE/UEI information are eligible to respond. No contract value has been disclosed and will be determined upon award based on submitted pricing.
Machine Shops

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
Federal
AAR Mobility SystemsThe contract opportunity titled AAR Mobility Systems under solicitation number 80NSSC26937581Q is a total small business set-aside as defined under FAR 19.5, targeting small business concerns for award. It was posted on July 24, 2026, with a response deadline of July 27, 2026, at 9:00 PM CT, suggesting a short turn-around period for submissions. The solicitation is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with the office located at Stennis Space Center, Mississippi, and the place of performance specified as Edwards, California, 93523. The NAICS code 332999 indicates the nature of the work involves other miscellaneous manufacturing, which may relate to mobility systems or specialized equipment support. Primary and secondary points of contact are Tracy Bremer and Will Garrett, both reachable via NASA email addresses. The contract is classified as combined, suggesting it may integrate elements of both acquisition and service procurement, though specific deliverables, pricing, performance timelines, evaluation criteria, and technical requirements are not accessible due to system errors and unauthorized access issues. No contract clauses, specifications, packaging requirements, inspection standards, or special conditions are available, and the estimated contract value remains unspecified. All solicitation documents including the RFQ, SOW, and Q&A are referenced as attached but unavailable for review in this context.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details