Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GLASS, LAMINATED

Active
SPE8E5-26-T-3544Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of laminated glass under solicitation SPE8E5-26-T-3544, with the NSN 9340011095934 and part number 9340-01-109-5934, requiring delivery of 60 units at a unit price of $60.00 for a total contract value of $3,600. The glass must conform to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with specific drawing controls tied to Revision G dated 09/03/2024 and earlier revisions. Critical item source inspection is mandatory, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated in the contract, with attributes assigned verification levels or AQLs consistent with critical, major, and minor classifications. Packaging must comply with MIL-STD-2073-1E, with individual packaging per SPI AK11095934, and marking in accordance with MIL-STD-129 using no special marking code. Plastic materials are discouraged for wrapping, cushioning, or dunnage where feasible. Delivery is FOB origin, with an acceptance point at origin and a required delivery date of December 30, 2026, allowing for a 167-day lead time. The shipment must be sent to DLA Distribution Red River, Building 499, Texarkana, TX, and palletization must adhere to DLA packaging guidelines. The contract emphasizes strict adherence to quality assurance provisions and prohibits substitution of materials unless explicitly permitted.

General Info

Procure 60 units of laminated glass under NSN 9340-01-109-5934 by July 20, 2026, via DIBBS for DoD.

Agency

Department Of Defense → RED RIVER RECEIVING BLDGView Agency

NAICS

327213 - Glass Container ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-3544.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → RED RIVER RECEIVING BLDG
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → RED RIVER RECEIVING BLDG
View Agency Profile
Office AddressUS
Contacts
Nafis Beyah
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GLASS,LAMINATED
GLASS, LAMINATED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 12277072 REVISION NR B DTD 08/13/1987 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12277072 REVISION NR DTD 08/23/2024 PART PIECE NUMBER:
SPE8E5-26-T-3544
SECTION B
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12277072 REVISION NR G DTD 09/03/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017423168 0001 EA 60.000
NSN/MATERIAL:9340011095934
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ: MATERIAL SHALL BE MARKED AND PACKAGED INDIVIDUALLY IN ACCORDANCE WITH SPI AK11095934 LISTED UNDER DWG #12277072 DTD 2/3/93
WHENEVER POSSIBLE AND PERMITTED BY THE
TERMS OF THE CONTRACT, AVOID THE USE OF
PLASTICS AS WRAPPING, CUSHIONING, OR
DUNNAGE MATERIALS.
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
SPE8E5-26-T-3544
SECTION B
PR: 7017423168 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:01/04/2027 Original Required Delivery Date:12/30/2026
SPE8E5-26-T-3544 NSN/Part Number: 9340-01-109-5934 Quantity: 60 EA Purchase Request: 7017423168QTY: 60 Delivery: 167 days ADO

Similar Contracts

NAICS: 327213
New
DIBBS
CAP, SCREW, BOTTLE ANThe contract is for the procurement of 66 units of CAP, SCREW, BOTTLE AN, identified by NSN 8125-01-497-2378 and purchase request number 7017422540, under solicitation SPE8ED-26-T-1110. The delivery is required within 24 days of award, with FOB origin terms and no variance allowed in quantity, requiring exact compliance with the 66-unit order. Inspection and acceptance occur at the destination point, specifically at DLA Distribution Red River, Building 499, Texarkana, TX. Packaging must conform to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization aligned to DLA’s RP001 packaging requirements, and all technical and quality standards from the DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. The unit of issue is each, priced at $66.00 per unit, with a total contract value of $4,356. The supplier, Reliability Brands LLC, must adhere to provisions for handling covered defense information and must remove government identification from non-accepted supplies. The required ship date is August 14, 2026, with the original delivery deadline set for October 7, 2026. Transportation details follow DLAD Proc Note C19 and C20, and the point of contact for the solicitation is Ogden Howard, with response due by July 20, 2026.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 327213
Federal
Heavy Rip Rap SupplyThe contract involves the supply of heavy rip rap rock material intended to stabilize and protect the dike trail at Trempealeau National Wildlife Refuge (NWR) from erosion. This subcontract is issued by the Department of the Interior under the agency Sat Team 2 Fws and falls under the NAICS code 327213, which relates to concrete and related products manufacturing. The work aims to enhance the structural integrity and long-term durability of the dike trail by utilizing heavy rock for erosion control purposes. The solicitation date is March 27, 2026, and although specific details such as solicitation number, type of set-aside, location of performance, and point of contact are not provided, the contract clearly focuses on delivering the heavy rip rap material required for environmental protection and infrastructure stabilization at the specified wildlife refuge. The contract is accessible through the government’s official procurement portal, indicating a formal government procurement process.
Sat Team 2 Fws

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 327213
Federal
3”–5” Gravel SupplyThe contract involves the supply of 3”–5” gravel intended for use as a base or armor layer in the repair of a dike trail. This procurement is categorized under NAICS code 327213 and is a subcontract opportunity issued by the Department of the Interior, specifically the Sat Team 2 Fws. The solicitation was posted on March 27, 2026, although specific details such as the solicitation number, set-aside status, and location of performance have not been provided. The gravel supplied will play a critical role in reinforcing the dike trail, ensuring structural stability and durability during repair efforts. The contract’s primary purpose is to secure an adequate and reliable source of appropriately sized gravel to support the Department of the Interior’s infrastructure maintenance activities. Key contact information and exact performance location details are not specified, indicating that interested parties may need to refer to the official contract workspace for further information.
Sat Team 2 Fws

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 327213
Federal
3/4” Gravel SupplyThe contract involves the supply of 3/4” gravel to be used specifically for surfacing or bedding layers in the repair of dike trails. It is categorized as a subcontract under the North American Industry Classification System (NAICS) code 327213, which pertains to concrete product manufacturing. The contract is issued by the Department of the Interior through the Sat Team 2 Fws agency. While details such as solicitation number, set-aside type, and exact place of performance are not provided, the focus remains on delivering the specified gravel material essential for infrastructure maintenance in the context of dike trail repairs. The contract was posted on March 27, 2026.
Sat Team 2 Fws

POSTED

4 months ago

DEADLINE

N/A
View Details