This Solicitation opportunity from Tennessee was posted on February 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Gloves

Closed

Z3815State & Local

Submission Closed02/11/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 316990

New

SLED

437456gb OSP Zero9 APX NEXT Radio Holsters Tailor Shop

Solicitation # SRC0000042725

The Ohio Department of Public Safety and Ohio State Highway Patrol are soliciting quotes for the purchase of brand-specific Zero9 APX NEXT radio holsters in plain black with Tek-Lok attachments. This is an MBE set-aside procurement where the award will be granted to the lowest responsible responsive bidder. Delivery is required to the ACF receiving location in Columbus, Ohio, on an F.O.B. destination basis. To be eligible for the award, bidders must provide firm-fixed pricing for all items, including all shipping costs, directly within the OhioBuys item grid. No substitutions are permitted, and any costs not identified in the grid will not be reimbursed. All inquiries must be submitted through the OhioBuys Inquiry Field, and bid pricing must remain valid for 30 days.

Dps225200 Tailor Shop Alum

POSTED

DEADLINE

Manufacturing of Adapter (NSN 4240013823558)This subcontract involves the manufacturing and delivery of 65 units of Adapter, NSN 4240013823558, for prime contractors supporting Department of Defense supply contracts. The work is managed by the DDSP New Cumberland Facility and requires all units to be fabricated according to exact NSN specifications and the DLA Master List of Technical and Quality Requirements RA001. Strict compliance with MIL-STD-130N for property identification and marking is mandatory, and the use of additive manufacturing is explicitly prohibited. The final deliverables must meet all established technical and quality standards and will be performed in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E7-27-T-0320

This solicitation, issued by DLA Troop Support Construction and Equipment, is for the procurement of 80 flashlight units, specifically Streamlight Inc 56654 P/N 90513 (NSN 6230016180929). The delivery is required 43 days after the date of award, with a need ship date of September 24, 2026, and an original required delivery date of February 25, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination, governed by FAR 52.246-1. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must be commercially packaged per ASTM D3951, although the DLA Master List of Technical and Quality Requirements takes precedence. Hazardous materials must be packaged according to TQ requirement IP025 and FED-STD-313. Payment and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Key regulatory requirements include compliance with the Buy American Act and the Berry Amendment. The contract also incorporates significant cybersecurity and information security clauses, including DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.204-7018 regarding the prohibition of certain telecommunications equipment. Additional compliance is required for the prohibition of hexavalent chromium and the management of toxic or hazardous materials.

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0411

Solicitation SPE8E6-27-T-0411 is a small business set-aside procurement issued by the Defense Logistics Agency for the acquisition of 65 adapters, identified by NSN 4240013823558. The contract is managed by DLA Troop Support, Construction and Equipment, with a required delivery date of March 29, 2027, and a delivery window of 114 days after award. The procurement utilizes the First Destination Transportation program to optimize shipping costs, with inspection and acceptance occurring at the destination, specifically the DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict technical and quality standards, including MIL-STD-129 for marking and labeling and MIL-STD-130N for property identification. Packaging requirements are governed by RP001 and the DLA Master List, with specific mandates for hazardous materials under FED-STD-313 and IP025, or commercial packaging via ASTM D3951 for non-hazardous items. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of additive manufacturing unless specifically authorized. Quotations must be submitted via the DIBBS portal by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E7-27-T-0317

Solicitation SPE8E7-27-T-0317 is issued by the DLA Troop Support Construction and Equipment office for the procurement of 36 helmet-mounted light flashlights under NSN 6230016168786. The requirement specifies a delivery timeframe of 44 days after order, with a need ship date of December 24, 2026, and a final required delivery date of January 20, 2027. Delivery is established as FOB Origin, with the destination for inspection and acceptance located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA Master List Technical and Quality Requirements, specifically RA001 and RP001 for packaging. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with FED-STD-313 and TQ requirement IP025. All shipments must be marked and labeled according to MIL-STD-129. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Notably, the government will not evaluate or award contracts to offers utilizing additive manufacturing processes. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS clauses regarding cybersecurity and the prohibition of covered defense telecommunications equipment.

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0166

Solicitation SPE8E6-27-T-0166, issued by the DLA Troop Support Construction and Equipment office, is a request for quotations for 1,561 units of Connector, Orifice A (NSN 4240-00-007-9453). The procurement requires delivery to the DDSP New Cumberland Facility in Pennsylvania, with a need ship date of March 15, 2027, and a final required delivery date of May 29, 2027. Delivery is based on FOB Origin terms under the First Destination Transportation program. Inspection and acceptance will occur at the origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and prohibits the use of additive manufacturing unless specifically authorized. Significant security and regulatory requirements are in place, including CMMC Level 2 certification, safeguarding of covered defense information per DFARS 252.204-7012, and strict export controls under ITAR and EAR. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, while invoicing must be processed electronically through the Wide Area WorkFlow system. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, and provide disclosure for any non-domestic materials used.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

437078ls OSP Shatterball & Belt Keeper Tailor Shop

Solicitation # SRC0000042712

The Ohio Department of Public Safety and the Ohio State Highway Patrol are soliciting quotes for the purchase of Shatterball 2-packs and high polish black leather duty belt keepers from Shatter Tactical. This is an MBE set-aside procurement where the belt keepers must be delivered with the Shatterball units already assembled. All items must be delivered to the receiving facility in Columbus, Ohio, on an F.O.B. destination basis. The contract will be awarded to the lowest responsible responsive bidder who prices all required items. No substitutions are permitted as the request is brand specific. Bidders must provide firm-fixed pricing, including all shipping costs, directly within the OhioBuys item grid, as the agency will not be responsible for unidentified costs. All bid pricing must remain valid for 30 days, and all inquiries must be submitted through the official OhioBuys inquiry field.

Dps225200 Tailor Shop Alum

POSTED

DEADLINE

LIGHT, MARKER, DISTRESS

Solicitation # SPE8E7-27-T-0248

Solicitation SPE8E7-27-T-0248 is a fixed-price procurement by the Defense Logistics Agency for 250 units of Commercial Off The Shelf (COTS) triage emergency marker lights, identified by NSN 6230-01-605-9650. These cylindrical, cone-shaped LED lights are designed for patient collection during emergency triage and feature multiple synchronized color combinations including red, yellow, green, and blue. Key technical specifications include a battery life ranging from 72 to over 200 hours using replaceable 3V CR2 lithium batteries, an LED life of approximately 100,000 hours, and an operating temperature range of -30 to +130 degrees Fahrenheit. The units are water resistant and pressure tested to 66 feet. Delivery is required by February 22, 2027, with a delivery lead time of 72 days after receipt of order, shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must be commercial and comply with MIL-STD-2073-1E and MIL-STD-147 for palletization, while marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129. All shipments to DLA Distribution locations require passive RFID tags per DFARS 252.211-7006. Inspection and acceptance will occur at the destination. The award will be based on the lowest rate, and the procurement is not a small business set-aside, though HUBZone price evaluation preferences may apply.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # RFSA-26-2422

The Parliamentary Protective Service of the Government of Canada has issued a Request for Supply Arrangement under solicitation number RFSA-26-2422 for the procurement of Duty Belt Systems. This federal solicitation is intended for performance within the National Capital Region and is managed by contracting authority Philippe St-Jean. Interested parties must access the official solicitation documents through MERX to ensure they have the most accurate and complete information. The deadline for submitting responses is November 12, 2026, at 7:00 PM.

Parliamentary Protective Service

POSTED

DEADLINE

M-06-27 Diploma Covers

Solicitation # BD-27-1381-BCC01-BCCFR-134142

Bristol Community College is soliciting proposals from qualified vendors for the annual procurement of 1,100 diploma covers. The required covers must be padded folders made of dark green leather lex with a short side hinge, designed to hold a horizontal 8.5 by 11 inch insert. Interior specifications include white cut silk moire on the left and right sides, with the right side featuring green ribbon corners. The college name must be stamped in gold and centered on the cover. Vendors are required to provide one sample diploma for review as part of their submission. The initial contract term begins in November 2026 and runs through June 30, 2027, with options for four one-year renewals through June 30, 2031. Proposals must be submitted in hard copy format in a sealed envelope to the Fall River, Massachusetts campus by 2:00 p.m. on November 2, 2026. Required documentation includes company contact information, a non-collusion statement, tax compliance certification, and a W9 form. Award decisions will be based on the vendor's demonstrated capability and how closely the proposal satisfies the college's requirements. Payment will be issued after complete delivery, and the college is exempt from federal and Massachusetts sales taxes.

BCC01 - Bristol Community College

POSTED

DEADLINE

DOC Garrison Uniform Dress Belts

Solicitation # RFQ27007044

The State of Rhode Island Department of Corrections is soliciting quotes under RFQ27007044 for the annual procurement of approximately 800 Garrison style uniform dress belts for correctional officers and training academy candidates. The solicitation was posted on October 6, 2026, with a response deadline of November 5, 2026. This procurement is strictly for the supply of belts and does not include any laundry or garment processing services. Technical specifications are rigid, and no substitutions of model or style are permitted. The belts must be black, 1.75 inches wide, and constructed from top grain, heavy weight tanned leather with a smooth finish and full leather lining. Each belt must feature a removable tongue style chrome finish square metal buckle secured by three 0.5 inch snaps. Additionally, belts must be stamped with the appropriate size and include postal certification stamp PE 1-4197, Style 2905. Vendors are required to attach detailed item specifications to their bid proposals, and any catalog submissions must be clearly marked and tabbed.

State of Rhode Island

POSTED

DEADLINE

Seat Cushion Cover Manufacturing and SupplyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture and supply of military-specification seat cushion covers identified by NSN 1680-01-583-8025. The project falls under NAICS code 316990 and was posted on August 17, 2026. Despite the initial issuance for the production and delivery of these items, the contract was subsequently canceled. All procurement activities related to this specific National Stock Number have been terminated.

Defense Logistics Agency

POSTED

2 months ago

DEADLINE

N/A

AI Contract Overview

This contract involves the procurement of lineman’s leather protector gloves designed to be worn over rubber gloves rated for 5,000 volts. The gloves must comply with U & S Specification #GPLV96-1, ensuring that they provide mechanical protection without electrical insulating properties. They are to be manufactured in sizes 8 and 10, with a snug fit over ASTM D120 rubber gloves, featuring a 10-inch overall length and a Gunn cut design. The materials specified include 2.0 to 2.5-ounce pearl-colored goatskin or cowhide leather treated for durability and pliability, with bonded nylon thread used in all stitching. Each pair is to be individually packaged in plastic bags with clear markings indicating the covered rubber glove size, manufacturer name, and a stamped "NES" logo on the cuff. Testing must adhere to Federal Specification KK-L-170C and meet ASTM Specification F696-91 standards. Approved manufacturers for the gloves include VOLTGARD, SALISBURY, YOUNGSTOWN, and KUNZ, with specific part numbers listed. The solicitation is issued by Nashville Electric Service in Tennessee, with a solicitation number Z3815, and a response deadline of February 11, 2026. The contract is focused on supplying quality protective gloves that meet stringent safety and manufacturing standards to ensure reliable mechanical protection for electrical workers handling rubber gloves in high-voltage environments.

General Info

Procurement of 5,000V-rated leather lineman gloves, sizes 8 and 10, meeting ASTM and federal standards.

Agency

Tennessee → Nashville Electric Service

NAICS

316990 - Other Leather and Allied Product Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

rfb

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedFeb 6

Solicitation

Response DeadlineFeb 11

Deadline has passed

Submission Closed

02/11/2026, 08:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, USA

Organization / AgencyTennessee → Nashville Electric Service

Office AddressNashville, TN, USA

Contacts

Procurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

PROTECTOR RUBBER GLOVE LV 8 LINEMAN'S GLOVE PROTECTOR'S, SIZE 8, FOR USE WITH RUBBER GLOVES RATED FOR 5,000 VOLTS. MUST MEET U & S SPECIFICATION #GPLV96-1 AS FOLLOWS: GENERAL REQUIREMENTS: THIS SPECIFICATION COVERS LEATHER PROTECTOR GLOVES TO BE WORN OVER ELECTRICAL WORKERS' RUBBER GLOVES. IT IS INTENDED THAT THE GLOVES SHALL FIT SNUGLY AND WITHOUT UNDUE WRINKLES OVER RUBBER GLOVES SPECIFIED IN ASTM D120. THE PURPOSE OF THE LEATHER PROTECTORS IS TO PROVIDE MECHANICAL PROTECTION ONLY FOR THE RUBBER GLOVES. THE LEATHER PROTECTORS SHALL NOT BE USED FOR ELECTRICAL PROTECTION. DETAILED REQUIREMENTS: 1. OVERALL LENGTH - 10" 2. GUNN CUT DESIGN 3. MANUFACTURED FROM 2.0 TO 2.5 OZ. PEARL COLORED GOATSKIN OR COWHIDE. TO BE TREATED FOR MINIMUM SHRINKAGE AND GOOD PLIABILITY AFTER WETNESS. 4. BONDED NYLON THREAD USED THROUGHOUT THE PROTECTOR 5. EACH PAIR OF GLOVES TO BE PACKED IN PLASTIC SHIPPING BAGS. 6. EACH PROTECTOR SHALL BE CLEARLY MARKED AS TO THE FOLLOWING: A. HAND SIZE OF THE RUBBER GLOVE TO BE DESIGNED TO COVER B. NAME OF THE MANUFACTURER C. "NES" STAMPED ON BACK OF CUFF WITH 1" BLACK LETTERS 7. TESTING OF LEATHER SHALL BE IN ACCORDANCE WITH FEDERAL SPECIFICATION KK-L-170C. 8. PROTECTORS MUST MEET ASTM SPECIFICATION F696-91. Approved Manufacturers and/or Part Numbers: VOLTGARDVLP-110 VOLTGARDVLP-310 SALISBURILP10-8 SALISBURILPG10-8 YOUNGSTO16-4100-10-08 KUNZGL999-8 Item Description: The NES Group/Class for this item is: Item Id: Item Number: Quantity: UOI: 24PR JC50464793800 2 PROTECTOR RUBBER GLOVE LV10 Page: RFB: Close Date: Z38152/11/2026 2 LINEMAN'S GLOVE PROTECTOR'S, SIZE 10, FOR USE WITH RUBBER GLOVES RATED FOR 5,000 VOLTS. MUST MEET U & S SPECIFICATION #GPLV96-1 AS FOLLOWS: GENERAL REQUIREMENTS: THIS SPECIFICATION COVERS LEATHER PROTECTOR GLOVES TO BE WORN OVER ELECTRICAL WORKERS' RUBBER GLOVES. IT IS INTENDED THAT THE GLOVES SHALL FIT SNUGLY AND WITHOUT UNDUE WRINKLES OVER RUBBER GLOVES SPECIFIED IN ASTM D120. THE PURPOSE OF THE LEATHER PROTECTORS IS TO PROVIDE M...