Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Glow Plug Supply & Manufacturing

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of seventeen glow plugs identified by NSN 2920-12-162-8099 to support Electric Power Plant III, requiring strict adherence to military interchangeability and technical specifications. Only approved manufacturers—Bosch, BorgWarner Beru Systems, Deutz AG, and Tadano Faun—are eligible to supply the components, ensuring compliance with established quality and performance standards. The contract is structured as a subcontract under NAICS code 336320 and is managed by the Department of Defense through the LAND SUPPLIER OPNS ENGINES office. Performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, providing a twelve-day window for submissions. All deliveries must meet the required military standards for reliability and operational compatibility under demanding conditions.

General Info

Seventeen glow plugs NSN 2920-12-162-8099 for Electric Power Plant III, approved manufacturers only, New Cumberland delivery.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINES

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 17 units of glow plugs for Electric Power Plant III, NSN 2920-12-162-8099, from approved manufacturers (Bosch, BorgWarner Beru Systems, Deutz AG, Tadano Faun), meeting military interchangeability and technical specifications.

Similar Contracts

Same NAICS industry code

PUMP, WINDOW WASHERThe contract is for the procurement of 184 units of a window washer pump with NSN 2540013757316, issued under solicitation SPE7L1-26-T-877U by the Defense Logistics Agency. Delivery is required within 208 days, with FOB origin terms, meaning the contractor bears all costs and risks until the goods are shipped from their location. The quantity has no tolerance for variance, and inspection and acceptance occur at the origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special marking code 00 indicating no additional markings are required. Palletization follows DLA’s RP001 standards and hazardous material packaging requirements as per IP025. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 18, 2026. A separate line item with no part number and a quantity of one unit represents the First Article Test requirement, which must be completed and submitted per FAR clause 52.209-3. This test is mandatory for contract award, and failure to meet its requirements could disqualify the offer. The government will not pay separately for this test item unless the requirements are explicitly met and the test is not waived. All shipping and transportation instructions reference DLA procedural notes C19 and C20. The contracting officer is Matthew Lepak, and the solicitation response deadline is August 6, 2026, with the NAICS code 336320 identifying the industry classification as motor vehicle parts manufacturing.

LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

LIGHT ASSEMBLY, INDIThis contract pertains to the procurement of a Light Assembly, Indicator, specifically part number 22506-001 from Korry Electronics Co., identified by NSN 6220-01-502-7218, with a quantity of four units. The item is classified as a Critical Application Item and must fully comply with the referenced technical data despite its incomplete state. Packaging must adhere strictly to MIL-STD-2073-1E with packaging code U, including primary packaging method 10, no clamping or drying, and no protective material, with unit containers labeled D3 and intermediate containers labeled E5. Marking must follow MIL-STD-129 with a special fragile labeling code 01-01, and palletization must meet DLA’s packaging requirements. Delivery is FOB origin with no variance in quantity permitted, inspection and acceptance occurring at destination, and the required delivery date is 61 days after award, with a need ship date of October 4, 2026, and original delivery target of January 1, 2027. Sampling and quality verification are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated in the contract. Attributes are to be assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The use of MIL-STD-105/ASQ Z1.4 is permitted only for determining sample size, never for acceptance criteria. The item is not hazardous per HMIC code review, eliminating the need for a Safety Data Sheet. Documentation for source approval is required under RC001, and all technical and quality standards are incorporated via the DLA Master List of Technical and Quality Requirements accessible online. Unit of issue is each (EA), priced at $4.00 per unit, totaling $16.00. The contract is issued under solicitation SPE4A6-26-T-09RC, with response deadlines in August 2026, and delivery is directed to the DLA distribution facility in New Cumberland, Pennsylvania.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

62--LIGHT ASSEMBLY,INDIThe contract solicitation seeks bids for four units of NSN 6220015027218, a light assembly, indi, to be delivered to W1A8 DLA DISTRIBUTION within 61 days after award. The only approved source for this item is supplier 81590 with part number 22506-001. This is a request for quotation under solicitation number SPE4A626T09RC, published on July 26, 2026, with responses due by August 3, 2026. No hard copies of the solicitation are available; all submissions must be made electronically through the designated online portal. No specifications, plans, or drawings are provided, and all responsible sources are invited to submit quotes, which will be considered if received on time. The procurement is managed by DLA Aviation under the Department of Defense, with the office located in Richmond, Virginia, and the NAICS code assigned is 336320. For questions, bidders must contact the buyer via the designated email address provided in the solicitation document or through the official DIBBS website using the solicitation number.

POSTED

about 18 hours ago

DEADLINE

Air Brake & Air System Component SupplyThe contract entails the supply and integration of critical air brake system components for commercial trucks, specifically the Bendix 4S/4M ABS, AD-IS air dryer, and heated moisture drain valve, all designed to enhance safety, reliability, and performance in air brake applications. These components must be fully compatible with existing truck air systems and installed to meet industry standards for durability and operational efficiency under demanding conditions. The work involves not only providing the specified parts but also ensuring seamless integration into the vehicle’s braking architecture to maintain optimal function and compliance with safety regulations. The solicitation is classified as a subcontract under NAICS code 336320, which pertains to automotive parts and accessories manufacturing, and is administered by the Mississippi Department of Finance and Administration through its MPTAP program. Responses are due by August 18, 2026, with the opportunity published on July 24, 2026. The place of performance and organizational details are not specified, indicating that the work may be performed at various locations consistent with the needs of the procurement. Contractors must meet all technical, delivery, and integration requirements without deviation, as the components are essential to the functionality and safety of commercial vehicle braking systems.

POSTED

DEADLINE

Heavy-Duty Axle and Drivetrain Component SupplyThe contract calls for the supply of front and rear axles designed to meet original equipment manufacturer load ratings for 88,000 GVW dump trucks, specifically requiring Meritor or Dana Spicer models with heavy-wall housing to ensure durability under extreme operational conditions. These components must be engineered to withstand the high torque and weight demands typical of heavy-duty dump truck applications, with strict adherence to OEM specifications for performance, safety, and reliability. The axles are intended for integration into commercial vocational vehicles operating in demanding environments, necessitating precision manufacturing and rigorous quality control. This is a subcontract under NAICS code 336320, awarded by the Mississippi Department of Finance and Administration through MPTAP, with a response deadline of August 18, 2026. The solicitation does not specify a set-aside classification, and the place of performance and point of contact details are not provided. Interested parties must submit proposals prior to the deadline, ensuring full compliance with technical and contractual requirements for axle specifications, delivery timelines, and quality assurance protocols. The opportunity is accessible via the Mississippi state contract portal for eligible suppliers seeking to provide critical drivetrain components to the commercial trucking and construction sectors.

POSTED

DEADLINE

Safety and Driver Assistance Systems SupplierThe contract seeks a small business to supply and integrate advanced safety and driver assistance systems including anti-lock braking systems, electronic stability control, airbags, tire pressure monitoring systems, and backup cameras for defense-related vehicle platforms. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only eligible small businesses may bid, in accordance with FAR 19.5 rules. The NAICS code 336320 classifies this as automotive safety system manufacturing, and the work must be performed at Fort Moore, Georgia, with a tight response deadline of August 4, 2026. The contracting activity is under the Department of Defense, specifically identified as FA4830 23 Cons Cc, though no point of contact or detailed address information is provided. All proposals must be submitted by the stated deadline to be considered for award, and the systems delivered must meet rigorous military-grade standards for reliability and performance under operational conditions.

FA4830 23 Cons Cc

POSTED

DEADLINE

Manufacturing and Supply of SCREEN, COOLER UnitsThe contract is for the manufacturing and supply of 101 units of SCREEN, COOLER with National Stock Number 2510-01-435-7979 and part number 388010050-1, to be produced in full compliance with established technical specifications and delivered according to a defined schedule. This is a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualified under the Small Business Administration guidelines are eligible to respond, and the North American Industry Classification System code 336320 identifies the relevant industry as Aircraft and Other Transportation Equipment Manufacturing. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and the performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract falls under the purview of the Department of Defense, specifically the LSO Combat Vehicles and Armament office, indicating the end-use for military vehicle systems. All deliverables must meet rigorous defense standards and timelines to support operational readiness.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Propeller Shaft with Universal Joint ManufacturingThe contract calls for the manufacturing of a propeller shaft assembly incorporating a universal joint, requiring precise machining, selection of defense-grade materials, dynamic balancing, and comprehensive quality testing to meet rigorous military mechanical standards. All components must be produced to ensure reliability, durability, and performance under extreme operational conditions typical of defense applications, with full traceability and documentation throughout the production process. The solicitation is classified as a subcontract under NAICS code 336320, issued by the Strategic Acquisition Program Directorate within the Department of Defense, with responses required by July 28, 2026. The work must be performed in compliance with federal defense procurement regulations, though specific performance location and point of contact details are not provided. Interested parties must submit proposals via the designated DIBBS portal before the deadline to be considered for award.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Brake Disc Manufacturing and SupplyThe contract entails the full production and delivery of three thousand kilotons of brake discs engineered to stringent military specifications, ensuring exact form, fit, function, and durability required for operational use. The work must conform to defense standards for performance under extreme conditions, with all units undergoing rigorous quality control to meet certification requirements for military vehicle systems. This is a subcontract under the NAICS code 336320, indicating specialized manufacturing of automotive components for defense applications. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and the performance location is designated as New Cumberland, Pennsylvania, 17070-5002. The contracting organization is the Department of Defense under the agency name LAND SUPPLIER OPNS VEHICLE SPT, indicating this procurement supports ground vehicle logistics and maintenance operations. All deliverables must be completed and shipped to the specified site within the contractual timeline, with no flexibility in compliance to technical or quality benchmarks.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Brake Booster Assembly Supply (Commercial Off-the-Shelf Item)The contract involves the supply of 33 commercial brake booster assemblies identified by NSN 2530016885639, sourced as a commercial off-the-shelf item under a subcontract arrangement. All units must meet MIL-STD requirements for packaging and labeling to ensure compliance with military standards, and delivery must be made FOB origin to the designated receiving point at DLA Red River in Texarkana, Texas, with a zip code of 75507-5000. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and the procurement is classified under NAICS code 336320, which pertains to automotive component manufacturing. The award will be managed by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with no set-aside provisions specified.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Vehicular Seat Manufacturing and AssemblyThe contract entails the full design, fabrication, and assembly of vehicular seats in strict adherence to technical drawings and specifications provided by the Defense Logistics Agency, encompassing all stages from welding and upholstery to final configuration. Work must meet rigorous military standards and be completed exactly as outlined in the referenced DLA documentation to ensure compatibility and functionality within combat vehicle systems. The project is classified as a subcontract under NAICS code 336320, indicating it falls within the motor vehicle body and trailer manufacturing sector, and is tied to the Department of Defense’s Combat Vehicles and Armament division. Performance of the work is required at a specified location in Tracy, California, with a ZIP code of 95304-5000, and all deliverables must be finalized and submitted by the response deadline of August 3, 2026. The solicitation was posted on July 23, 2026, providing potential contractors a window of approximately eleven days to prepare and submit proposals. While the specific point of contact and set-aside details are not provided, the location and technical requirements indicate this is a mission-critical procurement supporting defense vehicle production efforts. The official solicitation can be accessed via the DIBBS portal for detailed submission guidelines and compliance criteria.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacture of Oil Hose AssembliesThe contract requires the manufacture and supply of 27 oil hose assemblies that fully comply with military specifications MIL-DTL-25579H and MS8005E, ensuring performance and durability under demanding operational environments. All assemblies must be eligible for qualification on the Qualified Products List and Qualified Manufacturer List, with complete traceability maintained throughout production to guarantee material authenticity, process control, and end-item accountability. The work is scoped as a subcontract under the NAICS code 336320 and is administered by the Fluid Handling Division of the Department of Defense, with performance required at Robins Air Force Base, Georgia, 31098-1887. Proposals must be submitted by August 3, 2026, with the solicitation issued on July 23, 2026, and all deliverables expected to meet rigorous defense standards for reliability and safety in critical fluid transfer applications.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

STARTER, ENGINE, HANDThis contract is for the procurement of 485 units of a hand starter for diesel engines, specifically designated as a critical application item with the NSN 2990-01-323-0307. The item is classified as a commercial off-the-shelf product, with adequate catalog data available for evaluation of alternatives, and must comply with DLA packaging requirements and MIL-STD-2073-1E for preparation, including specific packaging methods, containment materials, and unit container codes. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or specified chemical reagents, with mercury-containing portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract mandates full compliance with DLA’s technical and quality requirements referenced by R or I numbers from the DLA Master List, and all items must be marked in accordance with MIL-STD-129 without special marking codes. Delivery is set for FOB origin, with a 178-day lead time and no variance allowed in quantity, and inspection and acceptance occur at the destination. The sole deliver point is the DLA Distribution San Joaquin facility in Tracy, California, and the required ship date is February 1, 2027. This procurement is under a Women-Owned Small Business set-aside, with technical and administrative oversight from the Department of Defense’s Land Supplier Operations Engines, and pricing is fixed at $485.00 per unit, totaling $235,225.

Other Motor Vehicle Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

MANIFOLD, EXHAUSTThe contract pertains to the procurement of an exhaust manifold for Cummins diesel engine model NTC-400, used on M915 through M920 vehicles, identified by NSN 2815-00-920-2073 and part numbers 151478 for Cummins Inc. and MA207 21 147 for AM General LLC. Two units are required to be delivered within 11 days of contract award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination. The item is classified as critical, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements unless substitutes are pre-approved. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all DLA Master List technical and quality requirements take precedence. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, consistent with transportation and shipping instructions referenced in DLAD Proc Notes C19 and C20. The original required delivery date was June 26, 2026, with a needed ship date of August 18, 2026, under solicitation SPE7L5-26-T-4625, with responses due by August 6, 2026. The unit of issue is each, priced at $2.00 per unit, totaling $4.00, and the contract falls under NAICS code 333618 with the Department of Defense as the contracting agency.

Other Engine Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SPRINGThis contract, identified under solicitation number SPE7L5-26-T-4623, pertains to the procurement of six units of items associated with NSN 5360-01-169-5457, with a delivery requirement within 130 days after award. The contract is governed by the Department of Defense’s Defense Logistics Agency and falls under the NAICS code 332613, indicating a focus on industrial machinery and equipment manufacturing. All technical and quality requirements referenced in the contract are sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment supersedes it. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or materials, except for specific functional applications such as batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemicals explicitly authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and equipped with a secondary containment barrier, in compliance with NAVSEA 5100-003D. The contract also mandates the removal of government identification from any non-accepted supplies. Solicitation responses are due by August 6, 2026, and performance is to be delivered to Greensboro, North Carolina, 27409. Primary point of contact is Randy Ith, reachable via email and phone provided.

Spring Manufacturing

POSTED

about 13 hours ago

DEADLINE

BELT, VThe contract pertains to the procurement of a V-belt, industrial part number 5L530, with a 5L cross-section and 53 inches effective outside length, designated by NSN 3030-00-528-4622. A total quantity of 24 units is required, to be delivered within 34 days of contract award, FOB origin, with no tolerance for quantity variance. Delivery is specified to the destination warehouse in Tracy, California, with inspection and acceptance also occurring at the destination point. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 72 months, and must be clearly marked with special marking code 32. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including preservation methods, wrapping materials, and unit containers, and all marking must follow MIL-STD-129. Ozone-depleting chemicals are strictly prohibited in any component or manufacturing process, and any substitutions require prior approval. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required in the sample lot unless otherwise stated, with attributes assigned specific verification levels or AQLs. The Technical Data Package revision A Gen 1 must conform to CID A-A-52490A, and full and open competition applies. The solicitation number is SPE7L5-26-T-4622, with a response deadline of August 6, 2026, and the original required ship date is September 10, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 13 hours ago

DEADLINE

IDLER, FUEL PUMPThe contract specifies the procurement of an idler gear assembly for a fuel oil pump, designated by NSN 2815-00-103-5340 and part number 9521000, manufactured by Progress Rail Locomotive Inc. for use in GMC 567 series and EMD model 16-645E5LR diesel engines. Nine units are required to be delivered within 11 days FOB origin, with zero variance allowed in quantity, and inspection and acceptance occurring at the destination warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including prescribed preservation methods, materials, and unit containment, while prohibiting any mercury or mercury compounds in preservation, packaging, or marking per IP056 and RD004. The item is classified as a critical application item and subject to configuration control under MIL-STD-973, excluding certain subclauses. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all marking must conform to MIL-STD-130 section 5.3.1. The delivery address, transportation instructions, and point of contact are fully specified, with the response deadline set for August 6, 2026, and the original required delivery date July 1, 2026.

Other Engine Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

VALVE, PILOT GOVERNORThe contract is for a single unit of a valve, pilot governor, specifically designated for use in an E/I steam turbine with the NSN 2825-01-214-9012 and part number 916395, supplied by either Siemens Government Technologies or Curtiss-Wright Electro-Mechanical Corp. The item is classified as a critical application and a Navy field level reparable, requiring strict configuration control in accordance with MIL-STD-973. All materials must comply with strict prohibitions against Class I ozone-depleting chemicals, which override any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must meet MIL-STD-2073-1E standards with specific preservation methods, wrapping materials, and unit container codes, while labeling follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and delivery is to be made FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be delivered within 165 days of contract award, with a required ship date of January 19, 2027, and an original delivery deadline of January 1, 2029. The procurement is governed by DLA technical and quality requirements referenced via R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE7L5-26-T-4627, issued under NAICS code 333611 by the Department of Defense, with a single unit purchased at a specified unit price and no variance permitted in quantity.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 13 hours ago

DEADLINE

PIPE, EXHAUSTThe contract pertains to the procurement of 14 units of PIPE, EXHAUST with NSN 2990-01-414-4072 under solicitation SPE7L5-26-T-4628, which is a Total Small Business Set-Aside as defined under FAR 19.5, targeting NAICS code 336390. The delivery must be completed within 158 days after order, and the solicitation was posted on July 26, 2026, with responses due by August 6, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision based on the solicitation issue date or award date depending on acquisition size. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and the item contains covered defense information requiring compliance with DFARS 252.225-7048. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have received explicit approval from DLA to handle such data. Packaging must conform to DLA standards, and the place of performance is specified as Tracy, California, 95304-5000, with Mary Rowley designated as the primary point of contact for inquiries.

Other Motor Vehicle Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

Hazardous Materials Compliance & Packaging ServicesThe contract requires comprehensive packaging, labeling, and regulatory documentation services for the Vacuum Bleed Filter, strictly aligned with MIL-STD-2073-1E for defense item packaging, MIL-STD-129 for labeling of military shipments, and the OSHA Hazard Communication Standard to ensure proper identification and handling of hazardous materials. All work must adhere to federal military standards for durability, traceability, and safety in transportation and storage, with particular emphasis on accurate hazard labeling, material safety data sheets, and compliance documentation to support DoD logistics and supply chain integrity. The performance location is specified as New Cumberland, PA, with a zip code of 17070-5002, indicating the need for on-site or locally coordinated fulfillment activities. The solicitation, issued under NAICS code 561990 for other support services, is classified as a subcontract opportunity posted by the Department of Defense under LAND SUPPLIER OPNS ENGINES with a response deadline of July 29, 2026. The contract demands strict adherence to federal regulations governing hazardous materials, requiring the vendor to demonstrate expertise in military packaging protocols and OSHA compliance, including updated SDS formatting, container labeling, and documentation audit readiness. This contract is not subject to a specific set-aside and is accessible through the DIBBS platform, requiring proposals to fully address technical and regulatory obligations to qualify for award.

All Other Support Services

POSTED

DEADLINE

Vacuum Bleed Filter Supply (NSN: 2990-01-513-6153)The contract specifies the supply of thirteen Vacuum Bleed Filters with part number 23055917-28 and national stock number 2990015136153, manufactured to meet stringent Department of Defense technical, quality, and traceability standards for use in critical aerospace systems. All units must comply with exacting performance and documentation requirements to ensure reliability and safety in high-stakes operational environments. The procurement is classified as a subcontract under NAICS code 332996, indicating it falls under other miscellaneous manufacturing. Performance is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with the contract awarded by the Land Supplier Operations Engines division under the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal before the deadline to be considered.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Quality Inspection and Compliance DocumentationThe contract requires comprehensive in-process and final inspection of rocker arms to ensure full compliance with Federal Acquisition Regulation 52.246-2, mandating rigorous quality control throughout manufacturing stages. All inspection activities must be thoroughly documented to meet audit-ready recordkeeping standards, with detailed records maintained for potential government review and verification. The work is to be performed at the specified place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and is classified as a subcontract under NAICS code 541690, indicating it falls within other scientific and technical consulting services. Responses are due by August 8, 2026, and the contract is issued by the Department of Defense through LAND SUPPLIER OPNS ENGINES, emphasizing the critical nature of quality assurance for defense-related components.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

First Destination Transportation (FDT) / Domestic FreightThe contract pertains to the transportation of packaged rocker arms under the Department of Defense’s First Destination Transportation program, requiring movement from an FOB origin point to a destination within the contiguous United States. Performance is specifically designated for New Cumberland, Pennsylvania, with the NAICS code 484220 indicating the scope involves truck transportation of freight. The contractor must comply with DLA’s FDT program requirements, which include using the Wide Area WorkFlow system for electronic reporting throughout the shipment process. This is a subcontract opportunity with a solicitation response deadline on August 8, 2026, and the posting date is July 24, 2026, indicating a standard procurement timeline for planning and bid submission. The contracting activity falls under Land Supplier Operations Engines, a component of the broader Department of Defense logistics infrastructure.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Marking and LabelingThis contract requires the application of durable, scannable labels and markings in strict compliance with MIL-STD-129 to support military logistics operations and seamless integration with the Wide Area Workflow system. The work must ensure that all markings are legible, weather-resistant, and machine-readable to facilitate accurate tracking and inventory management across the Department of Defense supply chain. The labels and markings must meet all technical specifications for content, placement, and material resilience mandated by the standard to guarantee uninterrupted operational readiness. The solicitation is issued as a subcontract under the NAICS code 323111 for printing and related support activities, with a response deadline of August 8, 2026. Performance is expected to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002. Although the agency and point of contact details are not provided, the contracting organization is listed as LAND SUPPLIER OPNS ENGINES within the Department of Defense. Participation is open without a specific set-aside designation, and all submissions must adhere to the technical and procedural requirements tied to MIL-STD-129 and WAWF interoperability to be considered.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE