Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GOVERNMENT FIRST ARTIC

Active
SPE7M8-26-T-5948Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Electrical Devices Division under solicitation number SPE7M8-26-T-5948, is for the procurement of 54 pressure switches with part number 0001S00000052. The contract is a total small business set-aside under NAICS code 332919, with a delivery requirement of 373 days after order. The contract carries strict compliance requirements, including CMMC Level 2 certification for third-party assessment organizations. Additionally, the technical data is subject to ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign persons without prior authorization. Access to this data is limited to DLA contractors with an approved US/Canada Joint Certification Program certification and completed export-control training.

General Info

DoD seeks 54 pressure switches; small business set-aside; requires CMMC Level 2 certification.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

(1)

RFQ SPE7M8-26-T-5948 for Electrical Devices

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUSA
Contacts
Dondiego Boler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,PRESSURE
SWITCH, PRESSURE
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000052 Quantity: 54 EA Purchase Request: 7017438062QTY - See Solicitation Delivery: 373 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
Federal
SEAT,VALVE
Solicitation # N0010426QNC97
This contract pertains to the procurement of ball valve seats designated as Special Emphasis Level I material, critical to naval shipboard systems where failure could result in catastrophic consequences including loss of life or vessel integrity. The specification requires seats to conform to Naval Sea Systems Command Drawing 803-5001003, with material consisting of Teflon (Polytetrafluoroethylene) meeting precise ASTM-D4894 standards for tensile strength, elongation, melting point, specific gravity, hardness, and water absorption. Each component must be traceable to its certified heat, lot, or batch through unique identifiers marked on the part or via tagging, ensuring alignment with the accompanying mechanical and chemical test reports. All materials must be mercury-free, and no permanent marking is permitted on Teflon seats; instead, they must be tagged with traceability codes linked directly to certification data. The contractor must maintain a certified quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, subject to unannounced government audits and inspections at origin. Government Quality Assurance Representatives will conduct source inspections, and the contractor must facilitate immediate access to facilities, equipment, and records. The contract mandates strict configuration control, requiring all changes to be submitted via Engineering Change Proposals (ECPs) classified as Class I or II, with full documentation of impacts on form, fit, function, logistics, and lifecycle costs. Waivers and deviations, whether critical, major, or minor, require written approval from the Contracting Officer and must be reviewed by the Quality Assurance Representative. Certification of compliance must be submitted for every batch, containing specific data including contract numbers, NSNs, compliance statements, and authorized signatures. All material certification documentation must be submitted through the Wide Area Work Flow system to Portsmouth Naval Shipyard for prior acceptance before shipment, with explicit instructions for routing and notification. Subcontractors must adhere to the same stringent quality requirements, with prime contractors responsible for monitoring and verifying supplier capabilities. The requirement is issued under Emergency Acquisition Flexibilities and is DX-rated under the Defense Priorities and Allocations System, with mandatory compliance with Buy American provisions and small business program representations. The contract also enforces strict documentation handling, data control, and distribution restrictions under OPNAVINST 5510.1, with all technical data managed via the ECDS portal and WAWF for submission, acceptance, and audit readiness.
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332919
New
Federal
48--VALVE,SAFETY RELIEF, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RZA22
The contract pertains to the repair or modification of a SAFETY RELIEF VALVE under solicitation N0010426RZA22, with a final offer submission deadline of 4:00 PM local time on July 24, 2026. Offers must be submitted as a Not-To-Exceed price based on a full repair effort, following a mandatory 90-day teardown and evaluation period during which the contractor must inspect, assess, and provide a Firm-Fixed Price proposal alongside a cost of new price. The work involves refurbishing the valve to meet Drawing V1E10601 and associated specifications, utilizing Government Furnished Property where available, and ensuring full compliance with Commercial Asset Visibility (CAV) reporting requirements. All repairs must account for potential damage, missing parts, and handling issues, with additional cost elements including teardown rates, throughput constraints, and induction expiration dates required in the proposal. The resultant contract will be a DO-rated order under the Defense Priorities and Allocations System and requires bilateral acceptance before execution. Delivery must adhere to a Requested Turnaround Time of 365 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the CAV system, with final Government inspection and acceptance mandatory within that window. The contractor must ensure compliance with MIL-STD-130 marking, mercury-free requirements, and configuration control, including submission of Engineering Change Proposals for any impact to form, fit, function, or interface. All packaging and preservation must meet MIL-STD-2073, with clear disclosure of any packaging locations and exceptions. Waivers and deviations must be submitted through the ECDS portal and classified as Critical, Major, or Minor, with full justification and logistical impact assessments. Documentation must be submitted electronically via WAWF, and all contractual documents are considered issued upon electronic transmission. The contracting office is NAVSUP Weapon Systems Support in Mechanicsburg, PA, with Amanda Gowdy as the primary point of contact. Small business subcontracting, Buy American, and equal opportunity requirements are incorporated, and all materials must comply with applicable regulations and distribution statements.
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
Federal
DISK,VALVE
Solicitation # N0010426QNE34
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE, STOP
Solicitation # N00104-26-Q-BQ23
The contract solicitation is for two stop valves identified by NSN 1HM 4820 017117570 PP, issued under solicitation number N00104-26-Q-BQ23 by the Navsup Weapon Systems Support Mech, part of the Department of Defense. The opportunity is a total small business set-aside as defined by FAR 19.5, with a NAICS code of 332919, indicating it is exclusively available to small businesses. The solicitation was posted on May 6, 2026, and responses must be submitted by May 26, 2026, at 9:59 p.m. Eastern Time. All quotations must be submitted via the link provided or by contacting the primary point of contact, Adele H. Lamb, whose email is ADELE.H.LAMB.CIV@US.NAVY.MIL and phone number is 564-230-2521. The office is located in Mechanicsburg, Pennsylvania, 17050-0788, and further details can be accessed by visiting the official website at https://www.neco.navy.mil.
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 20 days
View Details
NAICS: 332919
New
Federal
COUPLING,PIPE
Solicitation # N0010426QFF30
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 332919
New
Federal
BONNET ASSEMBLY
Solicitation # N0010426QFE60
The contract pertains to the procurement of a Bonnet Assembly designated as SPECIAL EMPHASIS material due to its critical role in a shipboard system, where failure could lead to catastrophic consequences including loss of life or the vessel. The item must strictly conform to NAVSHIPS drawing 803-2177525 and associated material specifications including ASTM-A105 or MIL-S-24093, with mandatory phosphate coating and adherence to specific welding, heat treatment, and threading standards. Comprehensive quality assurance protocols are enforced, requiring full traceability from raw material through final assembly, with each component bearing a permanent, legible traceability mark linked to certification data. Chemical and mechanical test reports must accompany every lot, verified by 100% inspection, and must be authenticated using controlled electronic signatures that are unique to the individual and cannot be altered post-signature. All certifications, including weld procedures and qualification data, must be submitted for government approval prior to production, and any changes or deviations require formal, classified waiver requests reviewed and approved by the Contracting Officer. Delivery is contingent upon prior review and acceptance of all certification documentation via the Wide Area Work Flow (WAWF) system, with shipments restricted to N50286 and notifications sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL; no material may be shipped without formal acceptance. Final delivery must occur within 365 days of contract effective date, and early or incremental deliveries are permitted at no additional cost. The contract mandates ISO-9001 or MIL-I-45208 quality systems with embedded calibration controls per ISO-10012 or ANSI-Z540.3, and all subcontractors must flow down identical requirements. Government inspection at source is required, with the Defense Contract Management Agency overseeing nondestructive testing and quality verification. The material must be mercury-free, and any use of foreign certification requires conversion to U.S. units with authorized signoff. The procurement is a total small business set-aside, subject to DPAS priority rating for national defense, and governed by Buy American regulations. Configuration control is strictly maintained, with Engineering Change Proposals required for any design modifications affecting form, fit, function, or interface. All documentation must be submitted electronically in standardized formats, and access to proprietary Navy drawings requires prior authorization through SAM.gov.
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
Federal
REPAIR MODULE,STRAI
Solicitation # N0010426QJC11
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332919
New
Federal
PARTS KIT,BALL VALV
Solicitation # N0010426QND00
This contract pertains to the supply of a special emphasis parts kit for a size 10 inch ball valve, consisting of a ball and two mating seats, to be used in a critical shipboard system where failure could lead to catastrophic consequences including loss of life or vessel. All components must strictly comply with Naval Ship Systems Drawings 4385051 and 4384678, along with referenced specifications including SAE AMS 6931 for the ball material and Dupont AF DE588 for the seats, with exacting mechanical and chemical property requirements. The ball must undergo a precise surface finish process to achieve a matte dull appearance with a surface roughness of 12 to 16 RHR, and spherical surface waviness must not exceed 0.0005 inches per inch of surface. Seat materials are subject to stringent testing for specific gravity, melting point, tensile strength, water absorption, hardness, and Teflon fiber content, with detailed procedures for dimensional stability testing using mineral oil baths and strict limits on inclusions. All materials must be traceable from raw stock to finished part through unique heat, lot, or batch markings permanently applied in accordance with MIL-STD-792, with traceability maintained through every manufacturing and subcontracting step. The contract mandates a fully documented quality system compliant with ISO-9001 and either ISO-10012 or ANSI-Z540.3 aligned with ISO-17025, or alternatively MIL-I-45208 with MIL-STD-45662. Government Quality Assurance Representatives will perform on-site inspections, and all suppliers must maintain records of all inspections, tests, and nonconformances, with 100% verification of certifications and traceability data. Welding, brazing, and hardfacing operations must follow S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, with all procedures and qualifications submitted and approved prior to work. Certification of compliance is required for all items and must include positive, unqualified statements of conformance, listing all tests performed, with full traceability to individual parts via unique identifiers. Material certification reports must show actual test results, prohibit transcription, and cannot include disclaimers. Shipping is prohibited until certification data is submitted via WAWF to Portsmouth Naval Shipyard with designated recipients and
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332919
New
Federal
CAP,VALVE
Solicitation # N0010426QZB16
This contract is a high-priority procurement under the Navy’s Level One program for a CAP, VALVE item designated as Special Emphasis Material, where failure could result in catastrophic consequences including loss of life, shipboard system failure, or loss of the vessel. The item must comply with stringent quality and traceability requirements mandated by federal law, DoD policy, and the Defense Priorities and Allocation System, and is rated DO for national defense priority. The material must be manufactured to Carleton Technologies drawing 2432-0001-1 using QQ-N-281 Class A material and must undergo oxygen cleaning in accordance with MIL-STD-1330. All components require Level I Source Certification, with each part uniquely traceable from raw material through fabrication to final delivery via heat-lot or traceability numbers permanently marked in compliance with MIL-STD-792, even when surface area is too small for direct marking, in which case a durable tag must be affixed. A robust quality system compliant with ISO-9001 and ISO-10012 or ANSI-Z540.3 with ISO-17025 is mandatory, with MIL-I-45208 and MIL-STD-45662 accepted as alternatives. All welds, brazing, and fabrication must adhere to S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, requiring prior submission and approval of welding procedures and qualification data, with electronic submissions preferred in PDF format. Full documentation of chemical and mechanical properties, nondestructive testing, and cleaning procedures must be certified with electronic signatures, which are treated as legally equivalent to handwritten signatures under strict control protocols. All certifications must be 100% verified for completeness and accuracy, with zero-defect acceptance criteria applying to final inspection regardless of lot size, and small lots below eight units requiring 100% inspection. The Contractor must maintain traceability through all subcontracted operations and ensure suppliers meet equivalent quality standards through rigorous evaluation and audit processes. Government source inspection is required, and shipping must be coordinated via Wide Area Work Flow using prescribed codes, with material held until explicit acceptance is granted by Portsmouth Naval Shipyard. The item must be shipped FOB destination, with delivery required within 200 days, and all packaging and marking must follow MIL-STD-2073-1 and
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332919
New
DIBBS
Manufacture of Pressure Switches (Part Number 0001S00000052)
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
Component Supply for Strainer Repair KitThe Fluid Handling Division of the Department of Defense is seeking a subcontractor for the supply of individual components necessary to assemble strainer repair kits. The required materials include seals, gaskets, filters, and metal fittings, all of which must be produced according to strict military specifications. This opportunity is listed under NAICS code 332919 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by August 24, 2026, following the posting date of August 11, 2026.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
ADAPTER BUSHING
Solicitation # SPE7M0-26-T-038B
This contract, identified as SPE7M0-26-T-038B, is for the procurement of one adapter bushing with NSN 4730015394064 and part number 10009-5 from Panova Inc. The order is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys. Delivery is required within five days after the order, with a required delivery date of August 10, 2026. The shipment is designated as an NMCS priority and is to be delivered FOB Origin to the USALRCTR Bavaria in Vilseck, Germany. The supplier must adhere to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Inspection and acceptance will take place at the destination.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 335313
New
DIBBS
SWITCH, ELECTRONIC
Solicitation # SPE7M8-26-T-5952
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-5951
This contract, identified as SPE7M8-26-T-5951, is a solicitation from the Department of Defense Electrical Devices Division for the procurement of one push switch, NSN 5930-01-350-6602. The requirement specifies a delivery timeframe of 20 days after order, with a required delivery date of August 10, 2026. The item is to be delivered FOB Origin, with inspection and acceptance occurring at the destination, specifically the USS Iwo Jima LHD 7. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-129 for marking and MIL-DTL-28786 for switch preservation and packaging. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by NAVSEA specifications. Shipping must be conducted via the fastest traceable means, and parcel post is explicitly prohibited.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
Supplier of Covered Defense Telecommunications Equipment
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
Electronic Invoicing via Wide Area Workflow (WAWF)
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 561990
New
DIBBS
Military-Compliant Packaging & Labeling Services
All Other Support Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 562910
New
DIBBS
Radioactive Materials Notification & Handling
Remediation Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & SDS Management
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
Supply of Thermostatic Switches
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
WAWF Payment Processing & Invoicing Support
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
Military Packaging, Palletization & Shipping Services
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling Services
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
Supply of Pressure Switch (NSN: 5930014605813)
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details