Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GOVERNMENT FIRST ARTIC

Active
SPE4A7-26-T-607LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of five units of a Panel Indicating Light Transmitting, classified as Type III Class 1-R, with the NSN 0001S00000052, for delivery within 518 days of award. The solicitation number is SPE4A7-26-T-607L, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, with performance required at Tinker AFB, Oklahoma. The item incorporates technical and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. The procurement is subject to stringent documentation protocols including Source Approval Requests, Configuration Change Management via Engineering Change Proposals, and mandatory qualification of components through Qualified Products or Manufacturers Lists. Export control regulations apply to technical data associated with the item, governed by ITAR or EAR, prohibiting export or disclosure to foreign persons without prior authorization, and restricting access to contractors with approved US/Canada Joint Certification Program status, completed training, and DLA approval. Packaging must adhere to DLA standards, and all supplies are subject to inspection at origin, with government identification removed from non-accepted items. The Defense Federal Acquisition Regulation Supplement clause DFARS 252.225-7048 governs export-controlled technical data handling, and cybersecurity compliance requires CMMC Level 2 certification for third-party assessors. The solicitation closed on August 11, 2026, with a primary point of contact provided for inquiries.

General Info

Procure five Type III Class 1-R Panel Indicating Lights for Tinker AFB, compliance with DFARS, ITAR/EAR, CMMC Level 2.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-607L.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Soni Randolph
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PANEL,INDICATING,LI
PANEL,INDICATING,LIGHT TRANSMITTING
Type III Class 1-R
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint
SPE4A7-26-T-607L
SECTION B
Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000052 Quantity: 5 EA Purchase Request: 7017572905QTY - See Solicitation Delivery: 518 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336320
New
DIBBS
STARTER, ENGINE, ELEC
Solicitation # SPE7L1-26-T-907W
The contract pertains to the procurement of a starter, engine, electrical component with NSN 2920-01-470-9867, issued by the Defense Logistics Agency under solicitation SPE7L1-26-T-907W. Four separate line items each specify one unit at a unit price of $1.00, with delivery required within five days FOB origin, zero quantity variance allowed, and inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including preservation method 41, wrapping with specified material protected from direct tape contact, containment in a vapor-proof barrier bag with heat-sealed closure, and cushioning using weather-resistant fiberboard die-cut inserts designed to immobilize the product, prevent container collapse, and evenly distribute weight to safeguard solder joints and structural elements. The outer container must be reinforced corrugated fiberboard certified by the manufacturer, labeled per MIL-STD-129 with special marking code ZZ indicating an up arrow and “Open This Side,” and palletized according to DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in any phase of preservation or packaging. The product must arrive in serviceable condition and be shipped via traceable freight, with parcel post prohibited. Shipments are directed to two distinct DoD addresses: one at Lewis McChord, Washington for three line items and another at Fort Bliss, Texas for one. Required delivery dates range from March to July 2026, and the contracting office is the Land Supply Chain under the Department of Defense, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
DIBBS
LIGHT ASSEMBLY, INDI
Solicitation # SPE4A6-26-T-11JK
The contract pertains to the procurement of a Light Assembly Indicator with NSN 6220-01-442-9625, quantity of ten units, under solicitation SPE4A6-26-T-11JK, with a required delivery within five days of award. All items must comply with DLA packaging requirements as outlined in RP001 and be marked per MIL-STD-129, with no special marking required. Packaging must conform to MIL-STD-2073-1E, with specific preservation methods, wrapping, and unit container standards defined. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 zero-based plans, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, or corresponding AQLs. Zero non-conformances are mandated unless otherwise specified. The product is classified as a Critical Application Item for Aerosonic LLC, and delivery is FOB origin with no quantity variance allowed. The item is to be shipped to the Government of Israel, Ministry of Defense, with G&B Packing Company designated as the freight forwarder. The contract incorporates technical and quality requirements referenced via R and I numbers from the DLA Master List, which governs compliance based on the solicitation or award date depending on acquisition scale. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment. Documentation for Source Approval Requests must be submitted, and government identification must be removed from non-accepted supplies. Physical identification of bare items is required. All deliveries are subject to origin inspection and acceptance, with hazardous materials packaging conforming to IP025 guidelines. The acquisition falls under NAICS code 336320, is managed by the Department of Defense’s ASC Commodities Division, and is classified as a federal solicitation with a response deadline of August 11, 2026. The original required delivery date is August 6, 2026, and the point of contact for inquiries is Berkeley Vaughan.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
MAGNET, PERMANENT
Solicitation # SPE7LX-26-U-9142
The contract is for the procurement of permanent magnets under NSN 5340011431263, with a quantity of 515 units, each priced at $515.00, totaling $265,225.00. Delivery is required FOB origin within 90 days, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, cushioning, and containerization, and marking must adhere to MIL-STD-129, with special requirements identified by code ZZ, including palletization as specified in DLA’s packaging rules. The contract is a total small business set-aside under NAICS code 336320, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Solicitation number SPE7LX-26-U-9142 expired on August 18, 2026, with response deadlines and posting dates referenced in the contract data. All technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and government identification must be removed from non-accepted supplies. The unit of issue is each, consistent with DoD standards, and hazardous materials packaging requirements are also applicable.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336320
New
DIBBS
LAMP UNIT, VEHICULAR
Solicitation # SPE4A6-26-T-11JN
The contract specifies a single unit of a vehicular lamp, part number E-014-023, with NSN 6220-01-518-3360, designated for commercial vehicle systems and sourced from CVG Sprague Devices, LLC in Michigan City, Indiana. The item is a 12-volt red/yellow pilot lamp requiring strict adherence to DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with all DLA standards overriding ASTM D3951 for commercial packaging. Packaging must comply with TQ requirement IP025 and be marked and labeled per MIL-STD-129, with palletization following RP001 guidelines; the unit is to be delivered in a single piece with zero variance in quantity. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must arrive within 10 days, with an original required delivery date of July 28, 2026. The shipment must be sent via the fastest traceable method, excluding parcel post, and addressed to W8028L at 6698 East J Street, Hastings, Nebraska 68901-8435, with the RDD code 555 and project code TP 2. The contract falls under the solicitation number SPE4A6-26-T-11JN, issued by the Department of Defense’s ASC Commodities Division, and the point of contact is Shenika Thompson. Covered defense information may apply, and any hazardous material handling must follow FED-STD-313, though this item is not designated as hazardous.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
FILTER, LIGHT, UTILIT
Solicitation # SPE4A6-26-T-11JL
The contract pertains to the procurement of a light filter, identified by NSN 6220014540354 and part number 208087, with a quantity of ten units to be delivered within twenty days from the contract award date. Delivery is FOB origin, inspection and acceptance both occur at the origin, and no variance in quantity is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container codes, while marking must follow MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and hazardous material shipping protocols are referenced where applicable. The item is classified as a critical application item and is subject to stringent quality provisions outlined in the DLA Master List of Technical and Quality Requirements, incorporated by reference through R and I numbers, with sampling mandated under MIL-STD-1916 or a comparable zero-based plan and zero non-conformances required unless otherwise stated. The procurement is issued under solicitation SPE4A6-26-T-11JL by the Department of Defense’s ASC Commodities Division for delivery to the Government of Israel, Ministry of Defense. Cybersecurity requirements include a CMMC Level 2 self-assessment, and the contractor must comply with tailored higher-level quality standards, removal of government identification from non-accepted supplies, and physical item marking specifications. The supply chain involves a freight forwarder based in Jersey City, NJ, with final delivery directed to a defense installation in Israel. The contract enforces compliance with defense-specific data handling procedures, including covered defense information, and stipulates that the version of the DLA Master List in effect on the solicitation issue date governs all referenced technical and quality requirements. The item falls under NAICS code 336320, and the point of contact for inquiries is Sterling Mason of DLA, with the original required delivery date set for August 6, 2026.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
Reel Assembly, Hose SupplyThe contract calls for the supply of a complete reel assembly with hose as a commercial off-the-shelf item, ensuring it meets all applicable military specifications without modification. The item must be delivered in its existing commercial form but is subject to destination inspection to verify compliance with required military standards, emphasizing functionality, durability, and performance under operational conditions. The procurement is structured as a subcontract and falls under the NAICS code 336320, which pertains to other transportation equipment manufacturing, indicating the focus is on specialized equipment used in defense logistics or vehicle systems. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and is managed by the Department of Defense through its Construction & Equipment Manu & Con agency. Although specific location details for the place of performance or point of contact are not provided, the procurement is hosted on the DIBBS platform, which governs defense-related contract opportunities. The requirement for destination inspection underscores the government’s need to validate compliance prior to acceptance, and bidders must ensure the COTS product inherently satisfies all military standards without customization or retrofitted components.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
Marine Seat Manufacturing and AssemblyThe contract seeks a subcontractor to fabricate and perform final assembly of a marine seat designated by NSN 2090-20-008-1750 and Part No. SWP-1055-LM, adhering strictly to military specifications with engineering approval required from the government. The work involves precision manufacturing processes to meet operational standards for naval environments, ensuring durability, safety, and compatibility with military platforms. All components and assemblies must comply with documented technical requirements and undergo verification under government oversight to confirm conformance. Performance is required at the location in Virginia Beach, Virginia, with a response deadline of August 13, 2026, and the solicitation posted on August 2, 2026. The North American Industry Classification System code 336320 identifies this as part of the transportation equipment manufacturing sector, specifically focusing on ship and boat building or related component fabrication. The ordering activity is the Fluid Handling Division under the Department of Defense, indicating the end-use is for defense-related maritime operations. Subcontractors must be prepared to meet schedule demands and quality controls typical of military procurement while operating under federal contracting obligations without set-aside designations.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
Engine Starter Motor SupplyThe contract is for the supply of Engine Starter Motor with NSN 2920015959889 and part number 3964428 at a unit price of $692.53 under CLIN 0001. This is a subcontract awarded by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 336320 which pertains to aircraft engine and engine parts manufacturing. The solicitation was posted on August 2, 2026, and the contract is associated with the award number SPE7LX21D0007 and delivery order SPE7L126FAZ8H. The place of performance and office address details are not specified, and no set-aside type or point of contact information is provided. The contract can be accessed via the DIBBS portal using the provided link.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336320
New
DIBBS
PARTS KIT, ELECTRICAL E
Solicitation # SPE7L1-26-T-902M
The contract is for a parts kit labeled as ELECTRICAL ENGINE STARTER with NSN 2920-00-089-3369, quantity of 21 units, under Purchase Request 7017688184, with delivery required within 20 days after award. The solicitation, identified as SPE7L1-26-T-902M, was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense through the Land Supply Chain organization. The place of performance is designated as Camp Lejeune, North Carolina, with Kristina Derry as the primary point of contact. Technical data associated with this item is subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure or transfer to foreign persons, regardless of location. This restriction extends to foreign national employees and overseas subsidiaries of U.S. companies and is governed by DFARS 252.225-7048. Access to the controlled technical data is strictly limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DLA training and questionnaires, and have received explicit approval from the DLA controlling authority for data access.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
STRAINER ELEMENT, SEDIM
Solicitation # SPE7M3-26-T-7807
The contract is for a strainer element, sediment with NSN/part number 4730-01-320-7111, quantity of 131 units, under purchase request 7017437890, with delivery required within 200 days after award. The solicitation number is SPE7M3-26-T-7807, posted on August 2, 2026, with responses due by August 13, 2026. It is classified under NAICS code 336320 and issued by the Department of Defense’s Fluid Handling Division. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States or abroad, and applies to all entities including U.S. subsidiaries. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires and received explicit authorization. The place of performance is New Cumberland, Pennsylvania, 17070-5002, with William Cain as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A5-26-T-317Y
This contract pertains to the procurement of a single unit of a lens and light component identified by NSN 6220-01-343-3962 and part number 25-0929-1543, classified as a commercial item. The requirement is governed by a set of technical, quality, and packaging standards, including mandatory compliance with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with special fragile labeling. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical attributes are subject to stringent verification levels. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. The item is designated for delivery FOB origin within 20 days to a military recipient in Kaohsiung, Taiwan, with no variance allowed in quantity. Unit of issue is each, and the contract references a comprehensive set of DLA technical and quality requirements available through their official portal. Packaging must adhere to DLA-specific palletization and container directives, and all documentation must support source approval and traceability. The contract is issued under a federal solicitation with a designated point of contact and is intended for Defense Logistics Agency acquisition.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
Steering Gear Component SupplyThe contract entails the supply of vehicular steering gear components under a multi-year delivery structure, supporting critical defense logistics needs through sustained and surge production capabilities. Execution is governed by rigorous quality assurance standards to ensure component reliability and performance under operational demands, with deliveries aligned to defense readiness timelines. The work falls under NAICS code 336320, categorizing it within the automotive component manufacturing sector, and is structured as a subcontract under the Defense Logistics Agency, operating under the Department of Defense. The agreement is designed to maintain continuous supply chain resilience, accommodating fluctuating demand through flexible production scaling without compromising inspection protocols or performance metrics. All deliveries are to be performed in support of the DLA’s broader mission to sustain military vehicle fleets, ensuring availability and operational readiness across all branches of the armed forces.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 561910
New
DIBBS
Packaging, Labeling, and Kitting Services for DLA DeliveriesThe contract solicits end-to-end packaging, preservation, labeling, and kitting services for aerospace components to be delivered FOB origin in strict compliance with Defense Logistics Agency standards. All work must adhere to DLA’s technical and procedural requirements to ensure components are properly protected, identified, and assembled for military use. The services are classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The NAICS code 561910 designates this as a support services activity within the waste management and remediation sector, though the nature of the work clearly aligns with specialized logistics and supply chain support for defense equipment. The solicitation was posted on August 3, 2026, with a firm response deadline of September 1, 2026, and is managed by the ASC Supplier Operations AE and AF Division under the Department of Defense. While the exact place of performance and agency office details are unspecified, delivery obligation is clearly defined at FOB origin, placing responsibility for logistics planning on the contractor. The contract is accessible through the DIBBS platform, and all prospective offerors are expected to comply with federal acquisition regulations and DLA-specific documentation standards. Participation is restricted to small businesses, making this an opportunity dedicated exclusively to qualified small business entities operating in the defense logistics space.
Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339920
New
DIBBS
Manufacture of Aircraft Seat Cushion (Aircraft Interior Component)The contract mandates the manufacture of ergonomic and durable aircraft seat cushions designed for military use, adhering strictly to Department of Defense packaging and quality standards. The product must meet rigorous performance criteria to ensure soldier safety, comfort, and long-term reliability under extreme operational conditions. All items must be produced in compliance with Federal Acquisition Regulation guidelines and delivered in accordance with DoD-specific packaging protocols to maintain integrity during transport and storage. This is a small business set-aside subcontract under NAICS code 339920, reserved exclusively for small business concerns as defined by the Small Business Administration. The solicitation was posted on August 3, 2026, with a deadline for responses set for September 1, 2026. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while specific performance locations and points of contact are not detailed, the work is intended to support military aircraft interior systems. Interested vendors must submit proposals through the official DIBBS portal prior to the deadline to be considered.
Sporting and Athletic Goods Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339920
New
DIBBS
Manufacture of Aircraft Seat Back Cushion (Critical Life Support Component)The contract seeks the manufacture of a critical life support component—an aircraft seat back cushion—designed to meet stringent aviation safety and durability standards for military aircraft. The product must be fire-resistant and engineered for long-term performance under extreme conditions, ensuring crew safety and compliance with military life support requirements. The solicitation is specifically set aside for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, ensuring opportunities for qualified small enterprises to compete. The North American Industry Classification System code 339920 categorizes this as the manufacturing of other miscellaneous fabricated metal products, aligning with specialized components for aerospace applications. The proposal must be submitted by September 1, 2026, with the contract awarded under the Department of Defense, specifically by the ASC SUPPLIER OPER AE AND AF DIV. While the physical location of performance is not specified, the component is intended for use in military aircraft systems, requiring adherence to exacting technical and certification benchmarks. The contract is structured as a subcontract, indicating it may be part of a larger supply chain supporting broader defense aviation programs. Participation requires full capability to deliver certified, high-reliability components without compromise to safety, durability, or regulatory compliance, with the DLA’s DIBBS platform serving as the official portal for submission and related documentation.
Sporting and Athletic Goods Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336412
New
DIBBS
Manufacture of Aircraft Fairing, Back (FAA PMA or Equivalent)The contract entails the manufacture and delivery of a structural or aerodynamic aircraft back fairing designed for life support systems, requiring strict compliance with military specifications and form-fit-function criteria to ensure seamless integration into existing platforms. The product must meet all technical and performance standards associated with aerospace applications under defense mandates, and the manufacturing process must be validated for consistent quality and reliability in operational environments. This is a small business set-aside subcontract categorized under NAICS code 336412, exclusively available to small businesses as defined by the Small Business Administration. The solicitation was posted on August 3, 2026, with responses required by September 1, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS portal for qualified bidders seeking to fulfill this defense-related procurement.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: NA
New
DIBBS
Unable to Retrieve Subcontract OpportunitiesThe contract opportunity titled "Unable to Retrieve Subcontract Opportunities" was posted on August 3, 2026, with a response deadline set for September 2, 2026. It is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, as defined by the Small Business Administration and FAR 19.5. The solicitation number SPE4A726R0674 is associated with this opportunity, which is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. However, critical details including the NAICS code, place of performance, point of contact, and the prime contract context are unavailable due to a system timeout. The location, agency office address, and specific performance requirements cannot be determined from the provided data, and no further decomposition or subcontracting structure can be identified at this time. Interested parties are directed to the provided UI link for potential updates or additional information.

POSTED

about 7 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A7-26-T-607H
This contract is for the procurement of 12 plain studs with NSN 5307-01-457-2738 and part number 399-84-1022, supplied by Buffalo Pumps Inc and Air & Liquid Systems Corporation, both under DLA supplier code 83130. The items are classified as critical application components and must be delivered FOB origin within 173 days of the contract award, with no variance allowed in quantity. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, California, with inspection and acceptance occurring at the destination. Packaging and preservation must strictly follow MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and all marking must comply with MIL-STD-129 without special markings. Mercury or mercury-containing compounds are strictly prohibited in any part of the product, its packaging, preservation, or labeling, except for specific functional uses such as batteries, fluorescent lamps, sensors, and instruments defined by NAVSEA, which must include a secondary containment and be shockproof per NAVSEA 5100-003D. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. All documentation, unit of issue, and transportation details are governed by DLA procedures and referenced directives.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CAP, LENS
Solicitation # SPE4A7-26-T-606R
The contract pertains to the procurement of a single unit of a CAP, LENS with NSN 5855-01-666-9264 under solicitation SPE4A7-26-T-606R, requiring delivery within 10 days of award with FOB origin terms and no variance in quantity. All items must comply with DLA’s packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including the specified packaging code U and absence of special marking. Sampling and inspection protocols mandate zero non-conformances per MIL-STD-1916 or ASQ H1331 unless otherwise stated, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Configuration change management and deviation requests are governed by RQ002 and RQ011, while government identification must be removed from non-accepted supplies. Delivery must be shipped via traceable freight to the designated distribution office at Camp Lejeune, NC, explicitly prohibiting parcel post. The item is required for military use, with a specified original delivery date of July 28, 2026, and all technical and quality requirements are governed by the DLA Master List referenced in RA001. The contract is subject to DoD unit of issue standards and requires compliance with all applicable engineering change procedures and quality assurance provisions.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, AIRCRAFT SAFET
Solicitation # SPE4A7-26-Q-0957
The contract specifies the procurement of a single aircraft safety shoulder harness with NSN 1680-00-555-2938 under purchase request 7017272193 for a quantity of 273 units, with delivery required within 497 days after award. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must meet DLA-specific requirements, and all items must undergo inspection and acceptance at the point of origin. Non-accepted supplies must have all government identification removed, and each item must be physically marked in accordance with bare item marking standards. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled technical data, and formal DLA authorization may access such data. The solicitation number is SPE4A7-26-Q-0957, issued on August 3, 2026, with responses due by August 22, 2026, managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Grayson Andrews as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606X
The contract is for one unit of a SPACER, SLEEVE with NSN 5365-01-701-2568, under solicitation SPE4A7-26-T-606X, with a delivery requirement of 20 days after award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific mandates for physical identification and bare item marking. Compliance with MIL-STD-1916 or comparable zero-based sampling plans is required, with attributes classified as critical, major, or minor tied to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major. The contractor must adhere to DLA packaging standards and remove government identification from non-accepted supplies. The product is associated with covered defense information and is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including domestic-based foreign nationals, and requiring strict compliance with DFARS 252.225-7048. Access to technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance located in Mechanicsburg, Pennsylvania, and inquiries directed to Renee Bynum.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A7-26-T-606Q
The contract is for electrical insulation tape, identified by NSN 5970-01-588-5080 and part number 3304920, with a quantity of four units, to be delivered within 20 days to Homestead Air Force Base, Florida. The item is classified as a critical application with a shelf life of 18 months, extendable, and must comply with Type II packaging requirements as specified under RS001. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1 under a zero-based acceptance plan, requiring zero non-conformances in the sampled lot unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes default to major. Inspection and acceptance occur at the manufacturer’s origin, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, including special code 33 for shelf life type. Palletization follows DLA packaging requirements, and shipment must use the fastest traceable method, explicitly prohibiting parcel post. The contract incorporates technical and quality requirements from the DLA Master List, and the supplier is responsible for compliance with all referenced standards including removal of government identification from non-accepted supplies. The total price is set at $4.00 per unit, with no variance allowed in quantity delivery.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COM
Solicitation # SPE4A7-26-T-606Z
The contract pertains to the procurement of two support structural components for aircraft, identified by NSN 1560-00-795-8779, under solicitation SPE4A7-26-T-606Z, with a delivery deadline of 151 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The supplier must comply with DLA packaging standards, source approval documentation, and inspection and acceptance procedures conducted at the point of origin. Export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, whether within the U.S. or abroad, and restricting access to contractors with approved JCP certification, completed DLA training, and formal authorization. Configuration changes require formal Engineering Change Proposal requests for any deviations or waivers. The item does not require Unique Identification per the Service customer’s request, though physical marking and removal of government identification from non-accepted supplies are mandated. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors, and covered defense information is subject to applicable DFARS provisions. Delivery is designated to Tinker AFB, Oklahoma, with primary point of contact provided for procurement inquiries.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606S
The item specified is a SPACER, SLEEVE with NSN 5365-01-668-5878, quantity of one unit, to be delivered within 20 days after order placement under purchase request 7017673422. The contract solicitation number is SPE4A7-26-T-606S, issued on August 3, 2026, with responses due by August 11, 2026. This procurement falls under NAICS code 332119 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance located in Mechanicsburg, Pennsylvania, 17050-2411. The technical specifications referenced are drawn from the DLA Master List of Technical and Quality Requirements, incorporating requirements identified by R and I numbers. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, and the supplier must be a certified C3PAO. The procurement includes strict compliance with DLA packaging standards and mandates the removal of government identification from non-accepted supplies. The supplied technical data is classified as export-controlled under either ITAR or EAR, and its dissemination to foreign persons, including non-U.S. citizens within the United States, is prohibited without explicit authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is required, and only contractors with an approved U.S./Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA export-controlled data questionnaire, are permitted to access or handle this data. The contracting officer for this solicitation is Grayson Andrews, reachable via email at grayson.andrews@dla.mil. All parties must adhere to these stringent safeguards to ensure national security compliance throughout the supply chain.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details