Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STARTER, ENGINE, ELEC

Active
SPE7L1-26-T-907WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a starter, engine, electrical component with NSN 2920-01-470-9867, issued by the Defense Logistics Agency under solicitation SPE7L1-26-T-907W. Four separate line items each specify one unit at a unit price of $1.00, with delivery required within five days FOB origin, zero quantity variance allowed, and inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including preservation method 41, wrapping with specified material protected from direct tape contact, containment in a vapor-proof barrier bag with heat-sealed closure, and cushioning using weather-resistant fiberboard die-cut inserts designed to immobilize the product, prevent container collapse, and evenly distribute weight to safeguard solder joints and structural elements. The outer container must be reinforced corrugated fiberboard certified by the manufacturer, labeled per MIL-STD-129 with special marking code ZZ indicating an up arrow and “Open This Side,” and palletized according to DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in any phase of preservation or packaging. The product must arrive in serviceable condition and be shipped via traceable freight, with parcel post prohibited. Shipments are directed to two distinct DoD addresses: one at Lewis McChord, Washington for three line items and another at Fort Bliss, Texas for one. Required delivery dates range from March to July 2026, and the contracting office is the Land Supply Chain under the Department of Defense, with Kristina Derry as the primary point of contact.

General Info

Procure one starter engine unit at $1.00 each, deliver FOB origin by July 2026, strict MIL-STD packaging, no mercury, traceable freight, two DoD destinations.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

BLDG 3810 20TH STREET, LEWIS MCCHORD, WA, 98433-0000, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-907W.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STARTER,ENGINE,ELEC
STARTER, ENGINE, ELECTRICAL.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CUMMINS POWER GENERATION INC. 44940 P/N 3604677RX
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017708113 0001 EA 1.000
NSN/MATERIAL:2920014709867
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7L1-26-T-907W
SECTION B
PR: 7017708113 PRLI: 0001 CONT’D
1. WRAP PRESERVED PRODUCT WITH SPECIFIED WRAPPING
MATERIAL IN AREAS WHERE DIE-CUT WILL CONTACT
PRODUCT. SECURE WRAPPING MATERIAL WITH TAPE.
DO NOT APPLY TAPE DIRECTLY ON PRODUCT.
2. PLACE WRAPPED PRODUCT INSIDE SPECIFIED
WATERVAPORPROOF BARRIER BAG, THEN REMOVE EXCESS
AIR AND HEAT SEAL. APPLY MIL-STD-129 UNIT
CONTAINER IDENTIFICATION MARKINGS TO THIS BAG.
3. CUSHIONING MATERIAL (CODE: JC DIE-CUT) SHALL BE
WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL
IMMOBILIZE AND PROTECT PRODUCT, PREVENT CONTAINER
COLLAPSE, AND INCREASE STACKING STRENGTH OF
CONTAINER.
DIE-CUT SHALL SNUGGLY NEST PRESERVED AND WRAPPED
PRODUCT. DIE-CUT SHALL LIFT PRODUCT AND PROTRUSIONS
AWAY FROM CONTAINER SURFACES TO PROTECT FROM
IMPACTS.
PLACEMENT OF DIECUTS SHALL BE AGAINST AREAS THAT
CAN WITHSTAND PRODUCT WEIGHT DISTRIBUTION WITHOUT
ANY DAMAGE OR WEAKENING OF SOLDER, JOINTS, ETC.
WEIGHT SHALL BE DISTRIBUTED OVER LARGER SURFACE
AREA TO REDUCE STATIC STRESS.
NOTE: THIS DESIGN WILL DISTRIBUTE WEIGHT EVENLY.
4. UNIT CONTAINER SHALL BE WEATHER-RESISTANT CORRUGATED
FIBERBOARD; AND CONTAINER FLAPS SHALL BE REINFORCED
TO STRENGTHEN THE BOTTOM OF THE CONTAINER. FIBERBOARD
CONTAINER SHALL HAVE A MANUFACTURER'S CERTIFICATE TO
VERIFY CONTAINER MATERIAL AND STRUCTURAL PROPERTIES.
PLACE WRAPPED AND CUSHIONED PRODUCT INSIDE THE
SPECIFIED UNIT CONTAINER, SECURE CLOSURE, AND
APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION
MARKINGS TO THIS CONTAINER.
PACKAGE DESIGN SHALL IMMOBILIZE PRODUCT WITHIN THE
CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM.
PACKAGE DESIGN PERFORMANCE CRITERIA IS SAFE DELIVERY
OF PRODUCT TO ULTIMATE USER. PRODUCT MUST ARRIVE IN
SERVICEABLE CONDITION.
ZZ SPECIAL MARKING REQUIREMENTS:
02 ARROW UP
OPEN THIS SIDE
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
BULK BREAK POINT:
W81TW6
0296 CS BN CO A DISTRIBUTI
GHOST AWCF SSF
BLDG 3810 20TH STREET
LEWIS MCCHORD WA 98433-0000
US
SPE7L1-26-T-907W
SECTION B
PR: 7017708113 PRLI: 0001 CONT’D
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W81TW6
0296 CS BN CO A DISTRIBUTI
GHOST AWCF SSF
BLDG 3810 20TH STREET
LEWIS MCCHORD WA 98433-0000
US
MARKFOR
W81TW6
0296 CS BN CO A DISTRIBUTI
GHOST AWCF SSF
BLDG 3810 20TH STREET
LEWIS MCCHORD WA 98433-0000
US
M/F: (TCN) W81TW661110317
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:04/24/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017708112 0001 EA 1.000
NSN/MATERIAL:2920014709867
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
SPE7L1-26-T-907W
SECTION B
PR: 7017708112 PRLI: 0001 CONT’D
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
1. WRAP PRESERVED PRODUCT WITH SPECIFIED WRAPPING MATERIAL IN AREAS WHERE DIE-CUT WILL CONTACT PRODUCT. SECURE WRAPPING MATERIAL WITH TAPE. DO NOT APPLY TAPE DIRECTLY ON PRODUCT.
2. PLACE WRAPPED PRODUCT INSIDE SPECIFIED WATERVAPORPROOF BARRIER BAG, THEN REMOVE EXCESS AIR AND HEAT SEAL. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS TO THIS BAG.
3. CUSHIONING MATERIAL (CODE: JC - DIE-CUT) SHALL BE WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL IMMOBILIZE AND PROTECT PRODUCT, PREVENT CONTAINER COLLAPSE, AND INCREASE STACKING STRENGTH OF CONTAINER.
DIE-CUT SHALL SNUGGLY NEST PRESERVED AND WRAPPED PRODUCT. DIE-CUT SHALL LIFT PRODUCT AND PROTRUSIONS AWAY FROM CONTAINER SURFACES TO PROTECT FROM IMPACTS.
PLACEMENT OF DIECUTS SHALL BE AGAINST AREAS THAT CAN WITHSTAND PRODUCT WEIGHT DISTRIBUTION WITHOUT ANY DAMAGE OR WEAKENING OF SOLDER, JOINTS, ETC. WEIGHT SHALL BE DISTRIBUTED OVER LARGER SURFACE AREA TO REDUCE STATIC STRESS.
NOTE: THIS DESIGN WILL DISTRIBUTE WEIGHT EVENLY.
4. UNIT CONTAINER SHALL BE WEATHER-RESISTANT CORRUGATED
FIBERBOARD; AND CONTAINER FLAPS SHALL BE REINFORCED
TO STRENGTHEN THE BOTTOM OF THE CONTAINER. FIBERBOARD
CONTAINER SHALL HAVE A MANUFACTURER'S CERTIFICATE TO
VERIFY CONTAINER MATERIAL AND STRUCTURAL PROPERTIES.
PLACE WRAPPED AND CUSHIONED PRODUCT INSIDE THE
SPECIFIED UNIT CONTAINER, SECURE CLOSURE, AND
APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION
MARKINGS TO THIS CONTAINER.
PACKAGE DESIGN SHALL IMMOBILIZE PRODUCT WITHIN THE
CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM.
PACKAGE DESIGN PERFORMANCE CRITERIA IS SAFE DELIVERY
OF PRODUCT TO ULTIMATE USER. PRODUCT MUST ARRIVE IN
SERVICEABLE CONDITION.
ZZ SPECIAL MARKING REQUIREMENTS:
02 ARROW UP
OPEN THIS SIDE
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
SPE7L1-26-T-907W
SECTION B
PR: 7017708112 PRLI: 0001 CONT’D
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
1. WRAP PRESERVED PRODUCT WITH SPECIFIED WRAPPING MATERIAL IN AREAS WHERE DIE-CUT WILL CONTACT PRODUCT. SECURE WRAPPING MATERIAL WITH TAPE. DO NOT APPLY TAPE DIRECTLY ON PRODUCT.
2. PLACE WRAPPED PRODUCT INSIDE SPECIFIED WATERVAPORPROOF BARRIER BAG, THEN REMOVE EXCESS AIR AND HEAT SEAL. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS TO THIS BAG.
3. CUSHIONING MATERIAL (CODE: JC - DIE-CUT) SHALL BE WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL IMMOBILIZE AND PROTECT PRODUCT, PREVENT CONTAINER COLLAPSE, AND INCREASE STACKING STRENGTH OF CONTAINER.
DIE-CUT SHALL SNUGGLY NEST PRESERVED AND WRAPPED PRODUCT. DIE-CUT SHALL LIFT PRODUCT AND PROTRUSIONS AWAY FROM CONTAINER SURFACES TO PROTECT FROM IMPACTS.
PLACEMENT OF DIECUTS SHALL BE AGAINST AREAS THAT CAN WITHSTAND PRODUCT WEIGHT DISTRIBUTION WITHOUT ANY DAMAGE OR WEAKENING OF SOLDER, JOINTS, ETC. WEIGHT SHALL BE DISTRIBUTED OVER LARGER SURFACE AREA TO REDUCE STATIC STRESS.
NOTE: THIS DESIGN WILL DISTRIBUTE WEIGHT EVENLY.
4. UNIT CONTAINER SHALL BE WEATHER-RESISTANT CORRUGATED
FIBERBOARD; AND CONTAINER FLAPS SHALL BE REINFORCED
TO STRENGTHEN THE BOTTOM OF THE CONTAINER. FIBERBOARD
CONTAINER SHALL HAVE A MANUFACTURER'S CERTIFICATE TO
VERIFY CONTAINER MATERIAL AND STRUCTURAL PROPERTIES.
PLACE WRAPPED AND CUSHIONED PRODUCT INSIDE THE
SPECIFIED UNIT CONTAINER, SECURE CLOSURE, AND
APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION
MARKINGS TO THIS CONTAINER.
PACKAGE DESIGN SHALL IMMOBILIZE PRODUCT WITHIN THE
CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM.
PACKAGE DESIGN PERFORMANCE CRITERIA IS SAFE DELIVERY
OF PRODUCT TO ULTIMATE USER. PRODUCT MUST ARRIVE IN
SERVICEABLE CONDITION.
ZZ SPECIAL MARKING REQUIREMENTS:
02 ARROW UP
OPEN THIS SIDE
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
BULK BREAK POINT:
SPE7L1-26-T-907W
SECTION B
PR: 7017708112 PRLI: 0001 CONT’D
W81TW6
0296 CS BN CO A DISTRIBUTI
GHOST AWCF SSF
BLDG 3810 20TH STREET
LEWIS MCCHORD WA 98433-0000
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W81TW6
0296 CS BN CO A DISTRIBUTI
GHOST AWCF SSF
BLDG 3810 20TH STREET
LEWIS MCCHORD WA 98433-0000
US
MARKFOR
W81TW6
0296 CS BN CO A DISTRIBUTI
GHOST AWCF SSF
BLDG 3810 20TH STREET
LEWIS MCCHORD WA 98433-0000
US
M/F: (TCN) W81TW661980007
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/21/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017707809 0001 EA 1.000
NSN/MATERIAL:2920014709867
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7L1-26-T-907W
SECTION B
PR: 7017707809 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
1. WRAP PRESERVED PRODUCT WITH SPECIFIED WRAPPING MATERIAL IN AREAS WHERE DIE-CUT WILL CONTACT PRODUCT. SECURE WRAPPING MATERIAL WITH TAPE. DO NOT APPLY TAPE DIRECTLY ON PRODUCT.
2. PLACE WRAPPED PRODUCT INSIDE SPECIFIED WATERVAPORPROOF BARRIER BAG, THEN REMOVE EXCESS AIR AND HEAT SEAL. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS TO THIS BAG.
3. CUSHIONING MATERIAL (CODE: JC - DIE-CUT) SHALL BE WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL IMMOBILIZE AND PROTECT PRODUCT, PREVENT CONTAINER COLLAPSE, AND INCREASE STACKING STRENGTH OF CONTAINER.
DIE-CUT SHALL SNUGGLY NEST PRESERVED AND WRAPPED PRODUCT. DIE-CUT SHALL LIFT PRODUCT AND PROTRUSIONS AWAY FROM CONTAINER SURFACES TO PROTECT FROM IMPACTS.
PLACEMENT OF DIECUTS SHALL BE AGAINST AREAS THAT CAN WITHSTAND PRODUCT WEIGHT DISTRIBUTION WITHOUT ANY DAMAGE OR WEAKENING OF SOLDER, JOINTS, ETC. WEIGHT SHALL BE DISTRIBUTED OVER LARGER SURFACE AREA TO REDUCE STATIC STRESS.
NOTE: THIS DESIGN WILL DISTRIBUTE WEIGHT EVENLY.
4. UNIT CONTAINER SHALL BE WEATHER-RESISTANT CORRUGATED
FIBERBOARD; AND CONTAINER FLAPS SHALL BE REINFORCED
TO STRENGTHEN THE BOTTOM OF THE CONTAINER. FIBERBOARD
CONTAINER SHALL HAVE A MANUFACTURER'S CERTIFICATE TO
VERIFY CONTAINER MATERIAL AND STRUCTURAL PROPERTIES.
PLACE WRAPPED AND CUSHIONED PRODUCT INSIDE THE
SPECIFIED UNIT CONTAINER, SECURE CLOSURE, AND
APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION
MARKINGS TO THIS CONTAINER.
PACKAGE DESIGN SHALL IMMOBILIZE PRODUCT WITHIN THE
CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM.
PACKAGE DESIGN PERFORMANCE CRITERIA IS SAFE DELIVERY
OF PRODUCT TO ULTIMATE USER. PRODUCT MUST ARRIVE IN
SERVICEABLE CONDITION.
ZZ SPECIAL MARKING REQUIREMENTS:
02 ARROW UP
OPEN THIS SIDE
SPE7L1-26-T-907W
SECTION B
PR: 7017707809 PRLI: 0001 CONT’D
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
1. WRAP PRESERVED PRODUCT WITH SPECIFIED WRAPPING MATERIAL IN AREAS WHERE DIE-CUT WILL CONTACT PRODUCT. SECURE WRAPPING MATERIAL WITH TAPE. DO NOT APPLY TAPE DIRECTLY ON PRODUCT.
2. PLACE WRAPPED PRODUCT INSIDE SPECIFIED WATERVAPORPROOF BARRIER BAG, THEN REMOVE EXCESS AIR AND HEAT SEAL. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS TO THIS BAG.
3. CUSHIONING MATERIAL (CODE: JC - DIE-CUT) SHALL BE WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL IMMOBILIZE AND PROTECT PRODUCT, PREVENT CONTAINER COLLAPSE, AND INCREASE STACKING STRENGTH OF CONTAINER.
DIE-CUT SHALL SNUGGLY NEST PRESERVED AND WRAPPED PRODUCT. DIE-CUT SHALL LIFT PRODUCT AND PROTRUSIONS AWAY FROM CONTAINER SURFACES TO PROTECT FROM IMPACTS.
PLACEMENT OF DIECUTS SHALL BE AGAINST AREAS THAT CAN WITHSTAND PRODUCT WEIGHT DISTRIBUTION WITHOUT ANY DAMAGE OR WEAKENING OF SOLDER, JOINTS, ETC. WEIGHT SHALL BE DISTRIBUTED OVER LARGER SURFACE AREA TO REDUCE STATIC STRESS.
NOTE: THIS DESIGN WILL DISTRIBUTE WEIGHT EVENLY.
4. UNIT CONTAINER SHALL BE WEATHER-RESISTANT CORRUGATED
FIBERBOARD; AND CONTAINER FLAPS SHALL BE REINFORCED
TO STRENGTHEN THE BOTTOM OF THE CONTAINER. FIBERBOARD
CONTAINER SHALL HAVE A MANUFACTURER'S CERTIFICATE TO
VERIFY CONTAINER MATERIAL AND STRUCTURAL PROPERTIES.
PLACE WRAPPED AND CUSHIONED PRODUCT INSIDE THE
SPECIFIED UNIT CONTAINER, SECURE CLOSURE, AND
APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION
MARKINGS TO THIS CONTAINER.
PACKAGE DESIGN SHALL IMMOBILIZE PRODUCT WITHIN THE
CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM.
PACKAGE DESIGN PERFORMANCE CRITERIA IS SAFE DELIVERY
OF PRODUCT TO ULTIMATE USER. PRODUCT MUST ARRIVE IN
SERVICEABLE CONDITION.
ZZ SPECIAL MARKING REQUIREMENTS:
02 ARROW UP
OPEN THIS SIDE
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
SPE7L1-26-T-907W
SECTION B
PR: 7017707809 PRLI: 0001 CONT’D
PACKAGING, PACKING AND MARKING.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
1. WRAP PRESERVED PRODUCT WITH SPECIFIED WRAPPING MATERIAL IN AREAS WHERE DIE-CUT WILL CONTACT PRODUCT. SECURE WRAPPING MATERIAL WITH TAPE. DO NOT APPLY TAPE DIRECTLY ON PRODUCT.
2. PLACE WRAPPED PRODUCT INSIDE SPECIFIED WATERVAPORPROOF BARRIER BAG, THEN REMOVE EXCESS AIR AND HEAT SEAL. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS TO THIS BAG.
3. CUSHIONING MATERIAL (CODE: JC - DIE-CUT) SHALL BE WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL IMMOBILIZE AND PROTECT PRODUCT, PREVENT CONTAINER COLLAPSE, AND INCREASE STACKING STRENGTH OF CONTAINER.
DIE-CUT SHALL SNUGGLY NEST PRESERVED AND WRAPPED PRODUCT. DIE-CUT SHALL LIFT PRODUCT AND PROTRUSIONS AWAY FROM CONTAINER SURFACES TO PROTECT FROM IMPACTS.
PLACEMENT OF DIECUTS SHALL BE AGAINST AREAS THAT CAN WITHSTAND PRODUCT WEIGHT DISTRIBUTION WITHOUT ANY DAMAGE OR WEAKENING OF SOLDER, JOINTS, ETC. WEIGHT SHALL BE DISTRIBUTED OVER LARGER SURFACE AREA TO REDUCE STATIC STRESS.
NOTE: THIS DESIGN WILL DISTRIBUTE WEIGHT EVENLY.
4. UNIT CONTAINER SHALL BE WEATHER-RESISTANT CORRUGATED
FIBERBOARD; AND CONTAINER FLAPS SHALL BE REINFORCED
TO STRENGTHEN THE BOTTOM OF THE CONTAINER. FIBERBOARD
CONTAINER SHALL HAVE A MANUFACTURER'S CERTIFICATE TO
VERIFY CONTAINER MATERIAL AND STRUCTURAL PROPERTIES.
PLACE WRAPPED AND CUSHIONED PRODUCT INSIDE THE
SPECIFIED UNIT CONTAINER, SECURE CLOSURE, AND
APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION
MARKINGS TO THIS CONTAINER.
PACKAGE DESIGN SHALL IMMOBILIZE PRODUCT WITHIN THE
CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM.
PACKAGE DESIGN PERFORMANCE CRITERIA IS SAFE DELIVERY
OF PRODUCT TO ULTIMATE USER. PRODUCT MUST ARRIVE IN
SERVICEABLE CONDITION.
ZZ SPECIAL MARKING REQUIREMENTS:
02 ARROW UP
OPEN THIS SIDE
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
SPE7L1-26-T-907W
SECTION B
PR: 7017707809 PRLI: 0001 CONT’D
BULK BREAK POINT:
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
MARKFOR
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
M/F: (TCN) W90HDC60760419
RDD: 101
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:03/23/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7017708111 0001 EA 1.000
NSN/MATERIAL:2920014709867
DELIVERY (IN DAYS):0005
SPE7L1-26-T-907W
SECTION B
PR: 7017708111 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
1. WRAP PRESERVED PRODUCT WITH SPECIFIED WRAPPING MATERIAL IN AREAS WHERE DIE-CUT WILL CONTACT PRODUCT. SECURE WRAPPING MATERIAL WITH TAPE. DO NOT APPLY TAPE DIRECTLY ON PRODUCT.
2. PLACE WRAPPED PRODUCT INSIDE SPECIFIED WATERVAPORPROOF BARRIER BAG, THEN REMOVE EXCESS AIR AND HEAT SEAL. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS TO THIS BAG.
3. CUSHIONING MATERIAL (CODE: JC - DIE-CUT) SHALL BE WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL IMMOBILIZE AND PROTECT PRODUCT, PREVENT CONTAINER COLLAPSE, AND INCREASE STACKING STRENGTH OF CONTAINER.
DIE-CUT SHALL SNUGGLY NEST PRESERVED AND WRAPPED PRODUCT. DIE-CUT SHALL LIFT PRODUCT AND PROTRUSIONS AWAY FROM CONTAINER SURFACES TO PROTECT FROM IMPACTS.
PLACEMENT OF DIECUTS SHALL BE AGAINST AREAS THAT CAN WITHSTAND PRODUCT WEIGHT DISTRIBUTION WITHOUT ANY DAMAGE OR WEAKENING OF SOLDER, JOINTS, ETC. WEIGHT SHALL BE DISTRIBUTED OVER LARGER SURFACE AREA TO REDUCE STATIC STRESS.
NOTE: THIS DESIGN WILL DISTRIBUTE WEIGHT EVENLY.
4. UNIT CONTAINER SHALL BE WEATHER-RESISTANT CORRUGATED
FIBERBOARD; AND CONTAINER FLAPS SHALL BE REINFORCED
TO STRENGTHEN THE BOTTOM OF THE CONTAINER. FIBERBOARD
CONTAINER SHALL HAVE A MANUFACTURER'S CERTIFICATE TO
VERIFY CONTAINER MATERIAL AND STRUCTURAL PROPERTIES.
PLACE WRAPPED AND CUSHIONED PRODUCT INSIDE THE
SPECIFIED UNIT CONTAINER, SECURE CLOSURE, AND
APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION
MARKINGS TO THIS CONTAINER.
PACKAGE DESIGN SHALL IMMOBILIZE PRODUCT WITHIN THE
CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM.
PACKAGE DESIGN PERFORMANCE CRITERIA IS SAFE DELIVERY
OF PRODUCT TO ULTIMATE USER. PRODUCT MUST ARRIVE IN
SERVICEABLE CONDITION.
SPE7L1-26-T-907W
SECTION B
PR: 7017708111 PRLI: 0001 CONT’D
ZZ SPECIAL MARKING REQUIREMENTS:
02 ARROW UP
OPEN THIS SIDE
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
1. WRAP PRESERVED PRODUCT WITH SPECIFIED WRAPPING MATERIAL IN AREAS WHERE DIE-CUT WILL CONTACT PRODUCT. SECURE WRAPPING MATERIAL WITH TAPE. DO NOT APPLY TAPE DIRECTLY ON PRODUCT.
2. PLACE WRAPPED PRODUCT INSIDE SPECIFIED WATERVAPORPROOF BARRIER BAG, THEN REMOVE EXCESS AIR AND HEAT SEAL. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS TO THIS BAG.
3. CUSHIONING MATERIAL (CODE: JC - DIE-CUT) SHALL BE WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL IMMOBILIZE AND PROTECT PRODUCT, PREVENT CONTAINER COLLAPSE, AND INCREASE STACKING STRENGTH OF CONTAINER.
DIE-CUT SHALL SNUGGLY NEST PRESERVED AND WRAPPED PRODUCT. DIE-CUT SHALL LIFT PRODUCT AND PROTRUSIONS AWAY FROM CONTAINER SURFACES TO PROTECT FROM IMPACTS.
PLACEMENT OF DIECUTS SHALL BE AGAINST AREAS THAT CAN WITHSTAND PRODUCT WEIGHT DISTRIBUTION WITHOUT ANY DAMAGE OR WEAKENING OF SOLDER, JOINTS, ETC. WEIGHT SHALL BE DISTRIBUTED OVER LARGER SURFACE AREA TO REDUCE STATIC STRESS.
NOTE: THIS DESIGN WILL DISTRIBUTE WEIGHT EVENLY.
4. UNIT CONTAINER SHALL BE WEATHER-RESISTANT CORRUGATED
FIBERBOARD; AND CONTAINER FLAPS SHALL BE REINFORCED
TO STRENGTHEN THE BOTTOM OF THE CONTAINER. FIBERBOARD
CONTAINER SHALL HAVE A MANUFACTURER'S CERTIFICATE TO
VERIFY CONTAINER MATERIAL AND STRUCTURAL PROPERTIES.
PLACE WRAPPED AND CUSHIONED PRODUCT INSIDE THE
SPECIFIED UNIT CONTAINER, SECURE CLOSURE, AND
APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION
MARKINGS TO THIS CONTAINER.
PACKAGE DESIGN SHALL IMMOBILIZE PRODUCT WITHIN THE
CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM.
PACKAGE DESIGN PERFORMANCE CRITERIA IS SAFE DELIVERY
OF PRODUCT TO ULTIMATE USER. PRODUCT MUST ARRIVE IN
SERVICEABLE CONDITION.
SPE7L1-26-T-907W
SECTION B
PR: 7017708111 PRLI: 0001 CONT’D
ZZ SPECIAL MARKING REQUIREMENTS:
02 ARROW UP
OPEN THIS SIDE
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
1. WRAP PRESERVED PRODUCT WITH SPECIFIED WRAPPING MATERIAL IN AREAS WHERE DIE-CUT WILL CONTACT PRODUCT. SECURE WRAPPING MATERIAL WITH TAPE. DO NOT APPLY TAPE DIRECTLY ON PRODUCT.
2. PLACE WRAPPED PRODUCT INSIDE SPECIFIED WATERVAPORPROOF BARRIER BAG, THEN REMOVE EXCESS AIR AND HEAT SEAL. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS TO THIS BAG.
3. CUSHIONING MATERIAL (CODE: JC - DIE-CUT) SHALL BE WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL IMMOBILIZE AND PROTECT PRODUCT, PREVENT CONTAINER COLLAPSE, AND INCREASE STACKING STRENGTH OF CONTAINER.
DIE-CUT SHALL SNUGGLY NEST PRESERVED AND WRAPPED PRODUCT. DIE-CUT SHALL LIFT PRODUCT AND PROTRUSIONS AWAY FROM CONTAINER SURFACES TO PROTECT FROM IMPACTS.
PLACEMENT OF DIECUTS SHALL BE AGAINST AREAS THAT CAN WITHSTAND PRODUCT WEIGHT DISTRIBUTION WITHOUT ANY DAMAGE OR WEAKENING OF SOLDER, JOINTS, ETC. WEIGHT SHALL BE DISTRIBUTED OVER LARGER SURFACE AREA TO REDUCE STATIC STRESS.
NOTE: THIS DESIGN WILL DISTRIBUTE WEIGHT EVENLY.
4. UNIT CONTAINER SHALL BE WEATHER-RESISTANT CORRUGATED
FIBERBOARD; AND CONTAINER FLAPS SHALL BE REINFORCED
TO STRENGTHEN THE BOTTOM OF THE CONTAINER. FIBERBOARD
CONTAINER SHALL HAVE A MANUFACTURER'S CERTIFICATE TO
VERIFY CONTAINER MATERIAL AND STRUCTURAL PROPERTIES.
PLACE WRAPPED AND CUSHIONED PRODUCT INSIDE THE
SPECIFIED UNIT CONTAINER, SECURE CLOSURE, AND
APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION
MARKINGS TO THIS CONTAINER.
PACKAGE DESIGN SHALL IMMOBILIZE PRODUCT WITHIN THE
CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM.
PACKAGE DESIGN PERFORMANCE CRITERIA IS SAFE DELIVERY
OF PRODUCT TO ULTIMATE USER. PRODUCT MUST ARRIVE IN
SERVICEABLE CONDITION.
ZZ SPECIAL MARKING REQUIREMENTS:
SPE7L1-26-T-907W
SECTION B
PR: 7017708111 PRLI: 0001 CONT’D
02 ARROW UP
OPEN THIS SIDE
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:ED OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
1. WRAP PRESERVED PRODUCT WITH SPECIFIED WRAPPING MATERIAL IN AREAS WHERE DIE-CUT WILL CONTACT PRODUCT. SECURE WRAPPING MATERIAL WITH TAPE. DO NOT APPLY TAPE DIRECTLY ON PRODUCT.
2. PLACE WRAPPED PRODUCT INSIDE SPECIFIED WATERVAPORPROOF BARRIER BAG, THEN REMOVE EXCESS AIR AND HEAT SEAL. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS TO THIS BAG.
3. CUSHIONING MATERIAL (CODE: JC - DIE-CUT) SHALL BE WEATHER-RESISTANT FIBERBOARD DIE-CUTS AND SHALL IMMOBILIZE AND PROTECT PRODUCT, PREVENT CONTAINER COLLAPSE, AND INCREASE STACKING STRENGTH OF CONTAINER.
DIE-CUT SHALL SNUGGLY NEST PRESERVED AND WRAPPED PRODUCT. DIE-CUT SHALL LIFT PRODUCT AND PROTRUSIONS AWAY FROM CONTAINER SURFACES TO PROTECT FROM IMPACTS.
PLACEMENT OF DIECUTS SHALL BE AGAINST AREAS THAT CAN WITHSTAND PRODUCT WEIGHT DISTRIBUTION WITHOUT ANY DAMAGE OR WEAKENING OF SOLDER, JOINTS, ETC. WEIGHT SHALL BE DISTRIBUTED OVER LARGER SURFACE AREA TO REDUCE STATIC STRESS.
NOTE: THIS DESIGN WILL DISTRIBUTE WEIGHT EVENLY.
4. UNIT CONTAINER SHALL BE WEATHER-RESISTANT CORRUGATED
FIBERBOARD; AND CONTAINER FLAPS SHALL BE REINFORCED
TO STRENGTHEN THE BOTTOM OF THE CONTAINER. FIBERBOARD
CONTAINER SHALL HAVE A MANUFACTURER'S CERTIFICATE TO
VERIFY CONTAINER MATERIAL AND STRUCTURAL PROPERTIES.
PLACE WRAPPED AND CUSHIONED PRODUCT INSIDE THE
SPECIFIED UNIT CONTAINER, SECURE CLOSURE, AND
APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION
MARKINGS TO THIS CONTAINER.
PACKAGE DESIGN SHALL IMMOBILIZE PRODUCT WITHIN THE
CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM.
PACKAGE DESIGN PERFORMANCE CRITERIA IS SAFE DELIVERY
OF PRODUCT TO ULTIMATE USER. PRODUCT MUST ARRIVE IN
SERVICEABLE CONDITION.
ZZ SPECIAL MARKING REQUIREMENTS:
02 ARROW UP
SPE7L1-26-T-907W
SECTION B
PR: 7017708111 PRLI: 0001 CONT’D
OPEN THIS SIDE
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
BULK BREAK POINT:
W81TW6
0296 CS BN CO A DISTRIBUTI
GHOST AWCF SSF
BLDG 3810 20TH STREET
LEWIS MCCHORD WA 98433-0000
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W81TW6
0296 CS BN CO A DISTRIBUTI
GHOST AWCF SSF
BLDG 3810 20TH STREET
LEWIS MCCHORD WA 98433-0000
US
MARKFOR
W81TW6
0296 CS BN CO A DISTRIBUTI
GHOST AWCF SSF
BLDG 3810 20TH STREET
LEWIS MCCHORD WA 98433-0000
US
M/F: (TCN) W81TW661980008
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/21/2026
SPE7L1-26-T-907W NSN/Part Number: 2920-01-470-9867 Quantity: 1 EA Purchase Request: 7017708112QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336320
New
DIBBS
LIGHT ASSEMBLY, INDI
Solicitation # SPE4A6-26-T-11JK
The contract pertains to the procurement of a Light Assembly Indicator with NSN 6220-01-442-9625, quantity of ten units, under solicitation SPE4A6-26-T-11JK, with a required delivery within five days of award. All items must comply with DLA packaging requirements as outlined in RP001 and be marked per MIL-STD-129, with no special marking required. Packaging must conform to MIL-STD-2073-1E, with specific preservation methods, wrapping, and unit container standards defined. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 zero-based plans, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, or corresponding AQLs. Zero non-conformances are mandated unless otherwise specified. The product is classified as a Critical Application Item for Aerosonic LLC, and delivery is FOB origin with no quantity variance allowed. The item is to be shipped to the Government of Israel, Ministry of Defense, with G&B Packing Company designated as the freight forwarder. The contract incorporates technical and quality requirements referenced via R and I numbers from the DLA Master List, which governs compliance based on the solicitation or award date depending on acquisition scale. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment. Documentation for Source Approval Requests must be submitted, and government identification must be removed from non-accepted supplies. Physical identification of bare items is required. All deliveries are subject to origin inspection and acceptance, with hazardous materials packaging conforming to IP025 guidelines. The acquisition falls under NAICS code 336320, is managed by the Department of Defense’s ASC Commodities Division, and is classified as a federal solicitation with a response deadline of August 11, 2026. The original required delivery date is August 6, 2026, and the point of contact for inquiries is Berkeley Vaughan.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
MAGNET, PERMANENT
Solicitation # SPE7LX-26-U-9142
The contract is for the procurement of permanent magnets under NSN 5340011431263, with a quantity of 515 units, each priced at $515.00, totaling $265,225.00. Delivery is required FOB origin within 90 days, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, cushioning, and containerization, and marking must adhere to MIL-STD-129, with special requirements identified by code ZZ, including palletization as specified in DLA’s packaging rules. The contract is a total small business set-aside under NAICS code 336320, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Solicitation number SPE7LX-26-U-9142 expired on August 18, 2026, with response deadlines and posting dates referenced in the contract data. All technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and government identification must be removed from non-accepted supplies. The unit of issue is each, consistent with DoD standards, and hazardous materials packaging requirements are also applicable.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336320
New
DIBBS
LAMP UNIT, VEHICULAR
Solicitation # SPE4A6-26-T-11JN
The contract specifies a single unit of a vehicular lamp, part number E-014-023, with NSN 6220-01-518-3360, designated for commercial vehicle systems and sourced from CVG Sprague Devices, LLC in Michigan City, Indiana. The item is a 12-volt red/yellow pilot lamp requiring strict adherence to DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with all DLA standards overriding ASTM D3951 for commercial packaging. Packaging must comply with TQ requirement IP025 and be marked and labeled per MIL-STD-129, with palletization following RP001 guidelines; the unit is to be delivered in a single piece with zero variance in quantity. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must arrive within 10 days, with an original required delivery date of July 28, 2026. The shipment must be sent via the fastest traceable method, excluding parcel post, and addressed to W8028L at 6698 East J Street, Hastings, Nebraska 68901-8435, with the RDD code 555 and project code TP 2. The contract falls under the solicitation number SPE4A6-26-T-11JN, issued by the Department of Defense’s ASC Commodities Division, and the point of contact is Shenika Thompson. Covered defense information may apply, and any hazardous material handling must follow FED-STD-313, though this item is not designated as hazardous.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-607L
The contract specifies the procurement of five units of a Panel Indicating Light Transmitting, classified as Type III Class 1-R, with the NSN 0001S00000052, for delivery within 518 days of award. The solicitation number is SPE4A7-26-T-607L, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, with performance required at Tinker AFB, Oklahoma. The item incorporates technical and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. The procurement is subject to stringent documentation protocols including Source Approval Requests, Configuration Change Management via Engineering Change Proposals, and mandatory qualification of components through Qualified Products or Manufacturers Lists. Export control regulations apply to technical data associated with the item, governed by ITAR or EAR, prohibiting export or disclosure to foreign persons without prior authorization, and restricting access to contractors with approved US/Canada Joint Certification Program status, completed training, and DLA approval. Packaging must adhere to DLA standards, and all supplies are subject to inspection at origin, with government identification removed from non-accepted items. The Defense Federal Acquisition Regulation Supplement clause DFARS 252.225-7048 governs export-controlled technical data handling, and cybersecurity compliance requires CMMC Level 2 certification for third-party assessors. The solicitation closed on August 11, 2026, with a primary point of contact provided for inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
FILTER, LIGHT, UTILIT
Solicitation # SPE4A6-26-T-11JL
The contract pertains to the procurement of a light filter, identified by NSN 6220014540354 and part number 208087, with a quantity of ten units to be delivered within twenty days from the contract award date. Delivery is FOB origin, inspection and acceptance both occur at the origin, and no variance in quantity is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container codes, while marking must follow MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and hazardous material shipping protocols are referenced where applicable. The item is classified as a critical application item and is subject to stringent quality provisions outlined in the DLA Master List of Technical and Quality Requirements, incorporated by reference through R and I numbers, with sampling mandated under MIL-STD-1916 or a comparable zero-based plan and zero non-conformances required unless otherwise stated. The procurement is issued under solicitation SPE4A6-26-T-11JL by the Department of Defense’s ASC Commodities Division for delivery to the Government of Israel, Ministry of Defense. Cybersecurity requirements include a CMMC Level 2 self-assessment, and the contractor must comply with tailored higher-level quality standards, removal of government identification from non-accepted supplies, and physical item marking specifications. The supply chain involves a freight forwarder based in Jersey City, NJ, with final delivery directed to a defense installation in Israel. The contract enforces compliance with defense-specific data handling procedures, including covered defense information, and stipulates that the version of the DLA Master List in effect on the solicitation issue date governs all referenced technical and quality requirements. The item falls under NAICS code 336320, and the point of contact for inquiries is Sterling Mason of DLA, with the original required delivery date set for August 6, 2026.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
Reel Assembly, Hose SupplyThe contract calls for the supply of a complete reel assembly with hose as a commercial off-the-shelf item, ensuring it meets all applicable military specifications without modification. The item must be delivered in its existing commercial form but is subject to destination inspection to verify compliance with required military standards, emphasizing functionality, durability, and performance under operational conditions. The procurement is structured as a subcontract and falls under the NAICS code 336320, which pertains to other transportation equipment manufacturing, indicating the focus is on specialized equipment used in defense logistics or vehicle systems. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and is managed by the Department of Defense through its Construction & Equipment Manu & Con agency. Although specific location details for the place of performance or point of contact are not provided, the procurement is hosted on the DIBBS platform, which governs defense-related contract opportunities. The requirement for destination inspection underscores the government’s need to validate compliance prior to acceptance, and bidders must ensure the COTS product inherently satisfies all military standards without customization or retrofitted components.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
Marine Seat Manufacturing and AssemblyThe contract seeks a subcontractor to fabricate and perform final assembly of a marine seat designated by NSN 2090-20-008-1750 and Part No. SWP-1055-LM, adhering strictly to military specifications with engineering approval required from the government. The work involves precision manufacturing processes to meet operational standards for naval environments, ensuring durability, safety, and compatibility with military platforms. All components and assemblies must comply with documented technical requirements and undergo verification under government oversight to confirm conformance. Performance is required at the location in Virginia Beach, Virginia, with a response deadline of August 13, 2026, and the solicitation posted on August 2, 2026. The North American Industry Classification System code 336320 identifies this as part of the transportation equipment manufacturing sector, specifically focusing on ship and boat building or related component fabrication. The ordering activity is the Fluid Handling Division under the Department of Defense, indicating the end-use is for defense-related maritime operations. Subcontractors must be prepared to meet schedule demands and quality controls typical of military procurement while operating under federal contracting obligations without set-aside designations.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
Engine Starter Motor SupplyThe contract is for the supply of Engine Starter Motor with NSN 2920015959889 and part number 3964428 at a unit price of $692.53 under CLIN 0001. This is a subcontract awarded by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 336320 which pertains to aircraft engine and engine parts manufacturing. The solicitation was posted on August 2, 2026, and the contract is associated with the award number SPE7LX21D0007 and delivery order SPE7L126FAZ8H. The place of performance and office address details are not specified, and no set-aside type or point of contact information is provided. The contract can be accessed via the DIBBS portal using the provided link.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336320
New
DIBBS
PARTS KIT, ELECTRICAL E
Solicitation # SPE7L1-26-T-902M
The contract is for a parts kit labeled as ELECTRICAL ENGINE STARTER with NSN 2920-00-089-3369, quantity of 21 units, under Purchase Request 7017688184, with delivery required within 20 days after award. The solicitation, identified as SPE7L1-26-T-902M, was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense through the Land Supply Chain organization. The place of performance is designated as Camp Lejeune, North Carolina, with Kristina Derry as the primary point of contact. Technical data associated with this item is subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure or transfer to foreign persons, regardless of location. This restriction extends to foreign national employees and overseas subsidiaries of U.S. companies and is governed by DFARS 252.225-7048. Access to the controlled technical data is strictly limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DLA training and questionnaires, and have received explicit approval from the DLA controlling authority for data access.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
STRAINER ELEMENT, SEDIM
Solicitation # SPE7M3-26-T-7807
The contract is for a strainer element, sediment with NSN/part number 4730-01-320-7111, quantity of 131 units, under purchase request 7017437890, with delivery required within 200 days after award. The solicitation number is SPE7M3-26-T-7807, posted on August 2, 2026, with responses due by August 13, 2026. It is classified under NAICS code 336320 and issued by the Department of Defense’s Fluid Handling Division. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States or abroad, and applies to all entities including U.S. subsidiaries. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires and received explicit authorization. The place of performance is New Cumberland, Pennsylvania, 17070-5002, with William Cain as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A5-26-T-317Y
This contract pertains to the procurement of a single unit of a lens and light component identified by NSN 6220-01-343-3962 and part number 25-0929-1543, classified as a commercial item. The requirement is governed by a set of technical, quality, and packaging standards, including mandatory compliance with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with special fragile labeling. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical attributes are subject to stringent verification levels. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. The item is designated for delivery FOB origin within 20 days to a military recipient in Kaohsiung, Taiwan, with no variance allowed in quantity. Unit of issue is each, and the contract references a comprehensive set of DLA technical and quality requirements available through their official portal. Packaging must adhere to DLA-specific palletization and container directives, and all documentation must support source approval and traceability. The contract is issued under a federal solicitation with a designated point of contact and is intended for Defense Logistics Agency acquisition.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
Steering Gear Component Supply
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339991
New
DIBBS
RUBBER STRIP
Solicitation # SPE7L1-26-T-907C
The contract is for one roll of rubber strip, each roll measuring 50 feet, under the national stock number 5330-01-651-7290, with a purchase request number 7017709123. The item must be packaged and sealed in a medium duty, waterproof, greaseproof, and opaque bag in compliance with MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The rubber strip must be free of asbestos, and any substituted material must be approved per Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. The item falls under federal supply classifications 5330/5331 and must adhere to MIL-STD-130N for identification marking of U.S. military property. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The solicitation number is SPE7L1-26-T-907C, with a response deadline of August 14, 2026, and delivery is required within 20 days after award. The contract is issued by the Department of Defense’s Land Supply Chain under NAICS code 339991, with the place of performance listed as FPO, ZIP 96660, and primary point of contact is Kristina Derry at krisitna.derry@dla.mil.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BOOT, DUST AND MOIST
Solicitation # SPE7L1-26-T-907V
The contract pertains to the procurement of one unit of BOOT, DUST AND MOIST with NSN 5340-01-725-1393 under solicitation SPE7L1-26-T-907V, requiring delivery within five days of award at origin FOB terms with zero variance in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, material codes, and unit container markings per MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s official requirements, and palletization must follow RP001 guidelines. The product is subject to strict prohibitions against ozone-depleting chemicals, and any substitutions must be pre-approved unless expressly allowed by specifications. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point at Sierra Army Depot in Herlong, California. The contractor must meet all identification and marking requirements per MIL-STD-130N, and the contract incorporates technical and quality standards referenced in the DLA Master List. This is a federal procurement under NAICS 332510 with no set-aside classification, and all data including shipment tracking, point of contact, and contract deadlines are encoded within the DLA systems for compliance and audit purposes.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXTEN
Solicitation # SPE7L1-26-T-906Y
The contract specifies the procurement of two self-locking hexagon nuts with an extended washer, identified by NSN 5310-01-598-8901 and part numbers 92461A200 and 3931486C1, classified as a commercial off-the-shelf item. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA’s Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards. The shipment must be sent via traceable means, excluding parcel post, to Fort Bliss, Texas, with mandatory markings per the designated point of contact and shipment identifiers. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized. The contract is issued under solicitation SPE7L1-26-T-906Y with a response deadline of August 14, 2026, and the required delivery date is July 31, 2026. The unit price is $2.00 per piece, totaling $4.00, and the contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STRAPPING
Solicitation # SPE7L1-26-T-908A
The contract includes a requirement for 56 units of a Commercial Off the Shelf (COTS) item identified as E Z LOADER BOAT TRAILERS, INC. with part number 250-017565 and NSN 5340017008576, priced at $56.00 per unit, for a total value of $3,136. Delivery is due within 20 days FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the origin point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking follows MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and the item must be shipped via the designated freight forwarder, V. ALEXANDER CO INC, to the provided shipping address. The solicitation is issued under contract number SPE7L1-26-T-908A with a response deadline of August 14, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 332510. Technical and quality standards referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOUSING, PANEL, VEHIC
Solicitation # SPE7L1-26-T-907J
This contract pertains to the procurement of a housing panel for vehicle applications under solicitation SPE7L1-26-T-907J, with the NSN 2510-01-687-5387 and a single unit of issue (AY). The item must be delivered within 20 days to a military vessel shipment address at FPO AP 96694-7100, with delivery terms as FOB origin and inspection and acceptance occurring at destination. No quantity variance is permitted. All packaging and labeling must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s packaging requirements, with the DLA Master List of Technical and Quality Requirements taking priority over any conflicting standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. The contract mandates shipment via the fastest traceable means, explicitly prohibiting parcel post, and directs vendors to use the VSM system for routing. The required delivery date is July 28, 2026, and specific tracking details including transport control number, RDD, project code, and signatory are provided for logistical execution. All specifications are bound to the DLA procurement policies, and the point of contact is Kristina Derry at the Department of Defense’s Land Supply Chain.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333611
New
DIBBS
BLOCK, PIVOT
Solicitation # SPE7L1-26-T-906P
This contract, identified by solicitation number SPE7L1-26-T-906P, is issued by the Department of Defense through the Land Supply Chain under the DLA for the procurement of a single unit of a BLOCK, PIVOT component with NSN 2825-00-385-9399, tied to Siemens Energy part numbers including B30742, E16592PC29, E16593PC30, G8788PC46, G9098-1PC45, G9098PC45, G9181PC46, and M271R. The item must be delivered within five days of contract award, FOB origin, with zero variance in quantity, and is subject to strict packaging standards per ASTM D3951, superseded where applicable by the DLA Master List of Technical and Quality Requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must adhere to RP001 requirements. The use of Class I ozone-depleting chemicals is absolutely prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. The delivery destination is SWEIHAN AIR BASE in AE, with the shipment tagged for RDD 999/NMCS and governed by DLA procurement notes C19 and C20 regarding transportation and first destination transfers. The required delivery date is July 31, 2026, and inspection and acceptance will occur at the destination. Technical compliance is mandatory, and all government-specific identifiers must be removed from non-accepted supplies. The contract is managed under a federal acquisition framework, with Kristina Derry as the primary point of contact.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
COVER, HANDLE, DOOR, V
Solicitation # SPE7L1-26-T-907Y
This contract pertains to the procurement of a cover, handle, and door component for vehicular applications, identified by NSN 2540-01-428-6195 and purchase request 7012536527, with a quantity of 1,755 units to be delivered within 90 days from the contract award. The item is designated as a critical application component and must be manufactured using a metal casting process requiring specific tooling; sourcing and engineering support are available through DLA’s Aviation or Land & Maritime Supply Chains. The item must comply with stringent technical and quality requirements drawn from the DLA Master List, with verification levels and acceptable quality levels mandated for critical, major, and minor attributes. Zero non-conformances are required in sampling per MIL-STD-1916 or equivalent zero-based plans, and a Certificate of Conformance is mandatory. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Packaging must conform to MIL-STD-2073-1E, marking to MIL-STD-129 with no special codes, and palletization must follow DLA packaging standards. The item is to be delivered FOB origin with no quantity variance allowed, inspected and accepted at the point of origin. The delivery destination is DLA Distribution Red River in Texarkana, TX, with a required ship date of January 8, 2026. The contract is governed by DLA-specific requirements including configuration change management, inspection protocols, and hazardous materials handling procedures, and was solicited under SPE7L1-26-T-907Y with responses due by August 14, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-906R
The contract pertains to the supply of a gasket identified by NSN 5330-01-610-9969 and part number L100212, with a single unit requirement to be delivered within five days of order placement. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV deterioration, and this packaging requirement applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. No asbestos is permitted, and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or naval-referenced chemical reagents; when exempted, portable devices must include a secondary containment barrier and meet NAVSEA 5100-003D standards. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 indicating “Do Not Bend,” and palletization must adhere to DLA packaging requirements. The delivery point is FOB origin, with inspection and acceptance occurring at destination, and zero tolerance for quantity variance. The contract prohibits parcel post shipping; transportation must use the fastest traceable method, with delivery addressed to the Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland. The purchase request number is 7017706951, with an original required delivery date of July 31, 2026, and the contract is issued under solicitation SPE7L1-26-T-906R, governed by DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-906X
This contract involves the procurement of a gasket with NSN 5330-01-603-2748 and part number 119810-13110 from YANMAR AMERICA CORPORATION, requiring one unit to be delivered within five days of award under solicitation SPE7L1-26-T-906X. The item must comply with stringent packaging standards specified in MIL-DTL-117, TYPE II, CLASS C, STYLE 1, including medium-duty, waterproof, greaseproof, and opaque packaging, and is excluded from the First Destination Packaging Program and standard commercial packaging due to its sensitivity and specifications. No asbestos is permitted as defined by FED-STD-313, and packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. The item must be shipped FOB origin to the designated delivery point at Camp Shelby, Hattiesburg, MS, using traceable freight methods and avoiding parcel post, with shipment designated as RDD/NSCS and tied to project TP 1. The contract defines a zero percent quantity variance and requires inspection and acceptance at destination, with the unit of issue as each. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced at the official DLA website. The contract's performance and compliance are overseen under DLA Land Supply Chain, with Kristina Derry as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-907X
The contract pertains to a single non-NSN item with CAGE code 62100 and part number 15047488, supplied by KOPPERS CO INC CONTAINER MACHINERY DIVISION located in Glen Arm, Maryland. The item is required in a quantity of one unit, with a total price based on a unit price for a single ea. Delivery is specified to be completed within five days of contract award, with FOB destination as the delivery term, meaning the supplier assumes all risk and cost until the item reaches the designated destination. Inspection and acceptance both occur at the destination, with no variance allowed in quantity—zero percent plus or minus. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and labeling must follow MIL-STD-129. Packaging must be palletized per RP001 DLA Packaging Requirements for Procurement, with the unit of issue and quantity per unit pack as defined in the contract. The delivery address is N62792 CVN/SSN MATERIAL SUPPORT at 500 West Park Lane, Hampton, VA 23666-5027, and shipment must be sent by the fastest traceable method; parcel post is strictly prohibited. The required delivery date is August 3, 2026, with no need ship date specified, and the solicitation number is SPE7L1-26-T-907X. The contracting office is under the Department of Defense, Land Supply Chain, and the primary point of contact is Darrell Pannell. For government use, the item is identified with DIC A3B, funding code XP, and project code ON9 TP 1.
All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-T-906Q
The contract is for the procurement of one straight shaft with NSN 3040-01-491-3925 under solicitation number SPE7L1-26-T-906Q, with a required delivery within five days of award. The item is part of a full and open competition managed by the Department of Defense through the Land Supply Chain, and the offeror must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Covered Defense Information applies, and the supplier is prohibited from using any Class I ozone-depleting chemicals in the manufacturing or incorporation of the part; any substitute chemicals require prior approval unless explicitly authorized by specifications. Complete technical data packages, including data for both approved and alternate parts, must be provided if Table A0648 is referenced. The place of performance is Portsmouth, with a zip code of 03801-5000. Responses are due by August 14, 2026, and the solicitation was posted on August 3, 2026. The primary point of contact for inquiries is Kristina Derry, reachable via email and phone provided.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
STANDOFF, THREADED, S
Solicitation # SPE7L1-26-T-907G
The contract pertains to the procurement of 21 threaded standoff spacers with NSN 5340-00-206-7632 under solicitation SPE7L1-26-T-907G, issued by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency. The delivery is required within 122 days after order, with responses due by August 14, 2026. Compliance with DLA packaging requirements and technical quality standards identified by R or I numbers is mandatory, governed by the DLA Master List of Technical and Quality Requirements, with the appropriate revision effective based on the solicitation or award date. The item is subject to full and open competition without set-aside restrictions. The product must not contain Class I ozone-depleting chemicals, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for specific permitted uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier as outlined in NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including those located in the United States. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and written authorization from the DLA. The place of performance is New Cumberland, PA, and inquiries should be directed to Michael Nordahl at the provided DLA email and phone.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details