This Solicitation opportunity from Department Of Defense was posted on July 19, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Great Pond Commercial Washer and Dryer

Closed

NAVMWR-23-Q-0062Federal

Submission Closed08/02/2023, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

RFP 07-135 Roseville Electric Utility – Air Compressor Maintenance

Solicitation # 20261028058

POSTED

DEADLINE

Roseville Electric Utility – Gas Compressor Maintenance

Solicitation # 20261028056

POSTED

DEADLINE

RFP 07-136 Roseville Electric Utility – Vapor Compressor Maintenance

Solicitation # 20261028055

POSTED

DEADLINE

Kubota Attachment Installation and Calibration

Department of Blind and Vision Impaired

POSTED

DEADLINE

CIPP Lateral Reinstatement

Augusta County Service Authority dba Augusta Water

POSTED

DEADLINE

Well Pumping Assembly Inspection and Shop Repair

POSTED

DEADLINE

ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES

Solicitation # 2026-RFP-130

Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.

LE - Production - MPP

POSTED

DEADLINE

Marine Mechanical Systems Repair

POSTED

DEADLINE

On-Call Ad-Hoc Elevator Inspections

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Specialized Five-Year Elevator Full-Load Testing

257-NETWORK Contract Office 17 (36C257)

POSTED

about 8 hours ago

DEADLINE

in 11 days

General Info

Agency

Department Of Defense → Commander Navy Installations Command

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Great Pond, ME, 04408, USA

Set-Aside

NONE

Documents

NAVMWR-23-Q-0062 Great Pond Commercial Washer and Dryer

rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJul 19

Solicitation

Response DeadlineAug 2

Deadline has passed

Submission Closed

08/02/2023, 08:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Commander Navy Installations Command

Contacts1 person available

OfficeMILLINGTON, TN, 38055-6500, USA

Organization / AgencyDepartment Of Defense → Commander Navy Installations Command

Office AddressMILLINGTON, TN, 38055-6500, USA

Contacts

Nika Maldonado

contact@example.gov

+1 (555) 000-0000

Full Description

The Contractor shall provide all services, including materials, labor, and installation required to perform the work described in this SOW, i.e. furnish and install a 40 lb. Commercial Washer and a 6 Cycle Commercial Dryer in the Rec Hall. The Contractor shall provide installation services in accordance with the manufacturer's specifications and in accordance with the publications listed in the attached RFQ. Work shall include but is not limited to the following: Contractor shall furnish and install a 40 lb Commercial Washer and a 6-cycle Commercial Dryer in the Rec Hall in the room shown on the attached RFQ. The washer shall be a commercial rated, model T-600, 40 lb capacity Washer as manufactured by Dexter, or approved equal. The dryer shall be a commercial rated, 6 Cycle, model T-50 Express Dryer as manufactured by Dexter, or approved equal. The dryer shall be heated by propane gas. The washer and dryer shall be anchored to the floor with drill-in type anchor bolts by Hilti, or equal, of the type and size as required by manufacturer's specifications. The anchorage attachment shall resist the vibration from the spin cycle of a capacity load in the washer or dryer. Contractor shall connect the washer to an existing 2 drain line in the room where the washer is installed and also connect to existing water lines and electrical receptacle in that room. Contractor shall connect the dryer to an existing propane gas line in the room next to the washer/dryer room, and install the dryer vent pipe through the exterior wall of the washer/dryer room. Contractor shall clean up the worksite daily and dispose of all construction debris off the property. Contractor shall submit with the response to this RFQ, complete specifications for the washer and dryer that is included in their proposal. Contractor shall provide instructions for operation and care of the new washer and dryer to the facility staff, including submittal of any manufacturer's operation and maintenance instructions. Contractor shall provide a written warranty on all materials and labor for a period of one year (longer if standard for materials/equipment) from the date of acceptance by the POC.