Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GRILLE, METAL

Active
SPE4A5-26-T-288SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for one metal grille identified by NSN 1660-01-323-5003 and part number 7-311113690-55, procured under solicitation SPE4A5-26-T-288S for the Department of Defense. Delivery is required within five days FOB origin with no quantity variance permitted, and inspection and acceptance occur at the point of origin. The item must comply with full technical and quality requirements referenced from the DLA Master List, including packaging per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Non-conforming supplies must have government identification removed, and physical identification must be applied directly to the bare item. The manufacturer must maintain ISO 9001:2015 quality management standards and ensure measuring and test equipment is properly calibrated. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; any unspecified attributes are treated as major. Additionally, the supplier must self-assess for CMMC Level 2 cybersecurity maturity and adhere to DLA packaging requirements including palletization and freight instructions. The delivery destination is the Poland FMS Consolidation in Huntsville, Alabama, and the contract specifies the need for a ship date by June 25, 2026.

General Info

Metal grille NSN 1660-01-323-5003 delivered FOB origin by June 25, 2026, per military standards and ISO 9001:2015.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

POLAND FMS CONSOLIDATION, HUNTSVILLE,, AL, 35824, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-288S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Sarah Cave
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GRILLE,METAL
GRILLE, METAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 8V613 P/N 7-311113690-55
SPE4A5-26-T-288S
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017252316 0001 EA 1.000
NSN/MATERIAL:1660013235003
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
BPLQ00
POLAND FMS CONSOLIDATION
HUNTSVILLE, AL 35824
HUNTSVILLE
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
BPLQ00
POLAND FMS CONSOLIDATION
HUNTSVILLE, AL 35824
HUNTSVILLE
US
M/F: (TCN) BPLQ236169A356
RDD: 177
PROJ: MB2 TP 1
SUPP ADD: BXXUEH SIG: L
SPE4A5-26-T-288S
SECTION B
PR: 7017252316 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: BN3 ADV: FC: YY
Need Ship Date:00/00/0000 Original Required Delivery Date:06/25/2026
SPE4A5-26-T-288S NSN/Part Number: 1660-01-323-5003 Quantity: 1 EA Purchase Request: 7017252316QTY: 1 Delivery: 5 days ADO

Similar Contracts

NAICS: 336411
New
DIBBS
RING, TURBINE FANThe contract is for the procurement of 39 units of a RING, TURBINE FAN with NSN 1660-00-691-8585 under solicitation SPE4A7-26-T-568X, with a delivery requirement of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must be accessed via the DLA eProcurement website. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the manufacturer’s origin, and any non-accepted items must have government identification removed prior to return. Measuring and test equipment used must meet applicable standards. The item contains technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location; access is limited to contractors certified under the US/Canada Joint Certification Program, who have completed DLA-specific training and been formally approved. The contract falls under NAICS code 336411, is sourced by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance occurring in New Cumberland, PA, and primary point of contact is Mel Astatike.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
HOSE ASSEMBLY, AIR BThis contract is for the procurement of 12 units of a hose assembly designed for air breathing applications, identified by NSN 4720-00-991-9771 and part number M26626-5-15, manufactured in compliance with MIL-PRF-26626G Revision G dated August 26, 2020. The item is classified as a critical application item and must adhere strictly to all technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The use of Class I ozone depleting chemicals is expressly prohibited, and any substitute materials require prior approval. Packaging must follow ASTM D3951 as augmented by DLA packaging requirements, including proper labeling per MIL-STD-129 and palletization in accordance with RP001. The unit of issue is each (EA), with no quantity variance permitted. Delivery is FOB origin with inspection and acceptance occurring at the destination. The required delivery date is 88 days from contract award, with an original delivery deadline of January 26, 2026, and a need ship date of January 20, 2026. All units must be delivered to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The solicitation number is SPE7M4-26-T-259V, issued under full and open competition, and the contract requires adherence to DLA transportation procedures C19 and C20. The primary point of contact is Blake Tushar, with a unit price of $12.00 per unit, totaling $144.00.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336411
New
Federal
Titanium RFI - WarstopperThe Defense Logistics Agency Warstopper Program is seeking input from industry on titanium usage to evaluate the potential expansion of its titanium buffer, aimed at strengthening industrial readiness for wartime surge demands. This request for information is strictly for planning purposes and does not constitute a solicitation, nor does it obligate the government to issue a future contract or compensate respondents for any costs incurred. Respondents are urged to provide detailed data on titanium grades and specifications used in DPAS-rated production, including annual volumes, common intermediate forms such as bar, plate, or sheet, current lead times, and projected five-year demand. The government emphasizes the importance of proprietary specification details to ensure compatibility with original equipment manufacturers, with assurances that such information will be treated as confidential within the Warstopper program. Vendors are also asked to disclose whether they maintain internal buffers of titanium intermediates, how manufacturing waste is handled, and whether minimum purchase quantities hinder production timelines. Additional questions focus on products with known surge requirements that could be impacted by extended lead times. All responses must be submitted via email to Christine Boyer by July 17, 2026, at 3 p.m. EST, with the subject line “RFI – Titanium,” and no verbal submissions will be accepted. The NAICS code for this effort is 336411, and while no contract is currently planned, any future solicitation will be posted on SAM.gov. Participation in this RFI is voluntary and will not affect eligibility for potential future opportunities.
Dcso Columbus

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336411
New
DIBBS
Supply of Critical Safety Item (CSI) Aircraft ComponentThe contract entails the manufacture and delivery of Rolls-Royce part number 6784981, designated as NSN 5310008180490, a Critical Safety Item (CSI) essential to aircraft systems and subject to rigorous military-grade quality standards. This component demands full traceability of materials, processes, and documentation throughout production to ensure compliance with defense regulations and safety protocols. The requirement is governed by stringent specifications that mandate adherence to military specifications, with all fabrication, inspection, and testing activities needing to meet or exceed applicable defense standards. The subcontract is issued by the ASC COMMODITIES DIVISION under the Department of Defense, with performance required at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 13, 2026, with responses due by July 21, 2026. The NAICS code 336411 identifies this as an aerospace product and parts manufacturing activity. Only qualified suppliers with proven capabilities in producing CSIs, established quality management systems, and full compliance with Defense Logistics Agency protocols are eligible to respond. Failure to meet traceability, documentation, or compliance requirements will result in immediate disqualification.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
Aerospace Air Duct Component Supply (DUCT, AIR RDU, AIRCRA)The contract involves the supply of an aerospace-grade air duct component with NSN 1680015699371, designed for integration into defense aviation systems, specifically for environmental control or avionics cooling applications. It is classified as a subcontract under the NAICS code 336411, which corresponds to aircraft manufacturing, indicating the part is a critical component within the broader aerospace supply chain. The procurement is managed by the Defense Logistics Agency on behalf of the Department of Defense, underscoring its importance to national defense infrastructure and operational readiness. The contract was posted on July 13, 2026, and is tied to the award identifier SPE7M826P0464, suggesting它是 part of a larger defense procurement effort. While details on the subcontractor, delivery timeline, and quantities are not provided, the absence of a set-aside designation implies the opportunity is open to all qualified vendors regardless of business size or certification status. The place of performance and point of contact information are unspecified, indicating that execution may occur at multiple locations under the broader oversight of the DLA. The component’s military specification and use in critical systems require strict adherence to quality, material, and dimensional standards consistent with aerospace and defense industry requirements.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details