Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

H--Environmental testing services to be completed in accordance with MIL STD SlOG.

Active
W91A2K02869010Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves securing specialized environmental testing services in compliance with MIL STD 810G standards, covering a comprehensive range of procedures such as low and high temperature, temperature shock, contamination by fluids, solar radiation, humidity, fungus, salt fog, dust, sand, immersion, acceleration, vibration, shock, pyroshock, icing, freeze/thaw, rail impact, and mechanical vibrations specific to shipboard equipment. The testing requires items sized at least 10" x 24" x 15" and mandates the delivery of detailed data reports including photographs. The contract is justified as an other than full and open competition procurement under FAR 13.106-1(b)(1), because only one responsible source, NTS Tempe, can fully meet the agency’s requirements, particularly for the critical sand and dust testing due to environmental constraints and the unique desert operating conditions of the systems. Market research and prior solicitation efforts were pursued, including an RFI in 2008 and an RFP in 2010, which yielded no acceptable alternative quotes. NTS Tempe was historically utilized, providing a proven working relationship, consolidating all testing in one facility, thus offering cost and time efficiencies. Interested parties were invited to express capability and interest before a specified deadline. The contract is managed by the Department of Defense’s Natick Contracting Division, located in Massachusetts, and is designated under NAICS code 541330 for environmental testing services.

General Info

Contract awards NTS Tempe sole-source environmental testing per MIL STD 810G for shipboard equipment.

NAICS

541330 - Engineering Services

Place of Performance

MA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg Natick
ContactsNo contacts available
OfficeNATICK, MA, 01760-5011, USA
Office AddressNATICK, MA, 01760-5011, USA
ContactsNo contact information available

Full Description

Show more
BACKGROUND: The FAR permits 'other than full and open competition' in certain circumstances. The following FAR Statutory Authorities pennit 'other than full and open competition: FAR 13. I06-I (b)( I)(b) Solicitingfrom a single source. (I) For purchases not exceeding the simplified acquisition threshold, contracting officers may solicit from one source if the contracting officer determines that the circumstances of the contract action deem only one source reasonably available (e.g., urgency, exclusive licensing agreements, brand name, or industrial mobilization). INSTRUCTIONS: To request 'other than full and open competition' the requestor must complete the items on this sheet. Each justification shall contain sufficient facts and rationale to justify the use of the specific authority cited. I) FAR Statutory Authority cited: 13.106-I(b)(J) only one responsible source and no other supplies or services will satisfy agency requirements. RFP conducted in June 2010 for environmental testing services. The only quote that could satisfy all requirements while allowing for a suitable test item size was from NTS Tempe. 2) Nature and description oflhe supplies or services required to meet the agency's needs: Environmental testing services to be completed in accordance with MIL STD SlOG. The methods include 500.5 Low Pressure (Altitude) Procedure 1,501.5 High Temperature - Procedure I (cyclic), 502.5 Low Temperature - Procedure I (7 days), 503.5 Temperature Shock, 504.1 Contamination by Fluids, 505.5 Solar Radiation (Sunshine) Procedure 1,505.5 (Sunshine) Procedure 2, 506.5 Rain, 507.5 Humidity, 50S.6 Fungus, 509.5 Salt Fog, 510.5 Dust, 510.5 Sand, 512.5 Immersion, 513.6 Acceleration, 514.6 Vibration, Procedure I, Category 9, 60 minutes per axis, 516.6 Shock, Procedure 1, 20g 1lms, 517.1 Pyroshock, beamshock, 10,000g, 10,000 Hz, 520.3, Temperature, Humidity, Vibration, and Altitude, 52 1.3 IcingfFreezing Rain, up to I Omm, 524 Freezeffhaw Procedure 2, 526 Rail impact (simulated), and 528 Mechanical Vibrations of Shipboard Equipment (Type J - Environmental and Type II Internally Excited). A data report with photos is also required. Test item size must be at least 10" x 24" x IS". 3) A demonstration that the proposed contractor is the only SOUTce available to provide these services or goods (i.e.unique qualifications, proprietary rights, etc.): Besides responding meeting all the requirements with a single facility, NTS Tempe is one of the few companies left in the nation that can perfonn Method 510.5 Sand and Dust testing due to heightened envirorunental concerns and requirements. Due to the desert environment in which the systems will be operating, this test is especially important. 4) A description of the market research that was conducted and the results, or a statement of the reason a market research was not conducted: Page 1 of 3 Market research was conducted via an RFI issued in 2008. An RFP was issued in June20 10. With no responses to the RFP, quotes were solicited from some vendors who responded to the RFI. 5) Any other facts supporting the use of other than fu ll and open competition: We have used the services ofNTS Tempe in Ihe past and forged a good working relationship. Being able to conduct all required testing at one facility that provides excellent reports saves the Govemmenttime and money. 6. Interested parties may identify their interest and capability to respond to this requirement to the U.S. Army RDECOM Contracting Center, Natick Contracting Division via e-mail to: contact@example.gov no later than 14:00 Noon (EST) on February 11, 2010. Contracting Office Address: RDECOM Contracting Center - Natick CCRD-NA-SY, Natick Contracting Division Kansas Street, Building 1 Natick, MA 01760-5011 Point of Contact: Ryan colgan, Contract Specialist +1 (555) 000-0000 contact@example.gov

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → W6QK Acc-Apg Natick

Same awarding agency

NAICS: 313210
New
Federal
RFI - Novel or Multifunctional Fibers, Yarns, Coatings/Finishes and Fabrics for Soldier Protection and Comfort (MFFYF)
Solicitation # RFINovelOrMultifunctionalFibersYarnsCoatings-FinishesandFabricsForSoldierProtectionAndComfort(MFFYF)
The US Army DEVCOM Soldier Center, in coordination with the Product Manager for Soldier Clothing and Individual Equipment, has issued this Sources Sought Announcement to identify potential sources of multifunctional fibers, yarns, fabrics, coatings, or finishes. The primary objective is to enhance the environmental protection of dismounted Warfighters by identifying materials that provide at least two functionalities, such as moisture management, thermal protection, repellency, vector protection, and flame resistance. The government is seeking both near-term solutions with a Technology Readiness Level (TRL) of 5 to 7+ for rapid integration into active Programs of Record, and far-term next-generation concepts with a TRL of 2 to 4 to inform future technology investments. All submissions must be completely PFAS-free and avoid cyclic siloxanes, silicones, and heavy metal catalysts. Respondents must provide detailed business information, including CAGE and NAICS codes, and verify compliance with the Berry Amendment. Technical submissions require comprehensive data, including GHS-compliant Safety Data Sheets and verifiable test reports adhering to standards such as ASTM D5034 for tensile strength and AATCC TM22 for water repellency. Physical samples, including specific yardage for fabrics or minimum meterage for yarns, must be submitted for destructive laboratory testing. Electronic responses, including white papers and the completed Appendix A template, are due by December 23, 2026, with physical samples to follow within six weeks. This announcement is for information gathering and planning purposes only and does not constitute a formal solicitation or a commitment to award a contract.
Broadwoven Fabric Mills

POSTED

6 days ago

DEADLINE

in about 2 months
View Details
NAICS: 315120
Federal
Request for Information on Combat Boot Sock
Solicitation # RequestForInformationOnCombatBootSock
The U.S. Marine Corps Portfolio Acquisition Executive Marine Corps is conducting market research through a Sources Sought Announcement to identify potential manufacturers for a high-performance combat boot sock. Designed for Department of Defense personnel operating in temperatures above 20 degrees Fahrenheit, the socks must be Berry Amendment compliant domestic productions. The required design is an over-the-calf length featuring cushioning to prevent blisters, graduated compression to promote blood flow, a non-slip top cuff, arch support, and nylon reinforcement at the heel and toe. Material specifications require a minimum of 52 percent wool (25 microns or finer), 20 percent nylon, and 1 percent spandex, with a strict prohibition on cotton and rayon fibers. The socks will be required in four classes: Marine olive drab green, black, coyote 498, and undyed/natural, across sizes small through extra-large. Performance standards include strict criteria for bursting strength, dimensional stability, wicking, and colorfastness, with quality inspections following ASTM D3990 and ASQ/ANSI Z1 standards. This is currently a Request for Information for planning purposes only and does not constitute a solicitation or commitment to procure. Interested parties, including non-manufacturing suppliers with qualified domestic partners, must submit their CAGE code, business size, and NAICS information electronically to the designated points of contact by October 30, 2026, at 5:00 PM EST.
Apparel Knitting Mills

POSTED

13 days ago

DEADLINE

in about 24 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS