Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

HARDENER, ADHESIVE

Active
SPE4A0-27-T-0317Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A0-27-T-0317 is a request for quotations issued by the Defense Logistics Agency (DLA) Weapons Support Aviation Supply Chain ESOC Buys for the procurement of one kit of adhesive hardener, identified by NSN 8040-01-519-6329. The requirement is not a small business set-aside and falls under NAICS code 325520. Delivery is required within five days after receipt of order, with an original required delivery date of October 23, 2026. The place of performance is located in Sioux Falls, South Dakota. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and bar-coding, and MIL-STD-2073-1 Appendix D for kit packaging. All kit contents must be placed in a single cushioned box with a detailed contents list. Inspection and acceptance will occur at the origin, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Due to the nature of the material, the contractor must provide Safety Data Sheets and OSHA Hazard Warning labels for approval prior to award. Significant regulatory requirements apply, including export controls under ITAR and EAR, and cybersecurity compliance via CMMC Level 2 and DFARS 252.204-7012. The Buy American Act and Berry Amendment also apply to this procurement. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. Technical and quality requirements are further governed by the DLA Master List of Technical and Quality Requirements.

General Info

DLA solicitation for one adhesive hardener kit delivered to Sioux Falls, South Dakota.

Agency

Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

NAICS

325520 - Adhesive Manufacturing

Place of Performance

1201 W ALGONQUIN ST BLDG 42, SIOUX FALLS, SD, 57104-0264, USA

Set-Aside

NONE

Documents

1

RFQ SPEA40-27-T-0317

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS
Office AddressUSA
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HARDENER,ADHESIVE
HARDENER, ADHESIVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire
SPE4A0-27-T-0317
SECTION B
(both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 8040-01-519-6329 Quantity: 1 KT Purchase Request: 7018809317QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325520
New
DIBBS
Supply of Specialized Adhesive (NSN 8040015795107)
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0174
Solicitation SPE8ES-27-T-0174 is a procurement issued by the Defense Logistics Agency for the supply of yellow adhesive, identified by NSN 8040-01-663-3917. The requirement is for four units of 5.0-ounce adhesive, with a specified delivery timeframe of 20 days after order and an original required delivery date of October 27, 2026. The items are to be delivered FOB Destination to Camp Lemonnier, Djibouti, in support of Operation Enduring Freedom. This is not a small business set-aside, and the applicable NAICS code is 325520. The contract emphasizes strict compliance with hazardous materials regulations, requiring the submission of Safety Data Sheets and HCS labels per 29 CFR 1910.1200 and Federal Standard No. 313-E prior to award. Technical and quality requirements are governed by the DLA Master List, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129. The adhesive is classified as a Type 2 item with a 12-month extendable shelf life. Inspection and acceptance will occur at the destination. Invoicing must be processed electronically through the Wide Area WorkFlow system.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
TAPE, ADHESIVE, RUBBER
Solicitation # SPE4A5-27-T-1900
Solicitation SPE4A5-27-T-1900 is issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of eight units of adhesive rubber tape, identified by NSN 9320-01-741-9834 and Boeing part number CDSP5317D-03-50-7400. This item is classified as a Commercial Off the Shelf (COTS) product. The contract specifies a delivery period of 154 days after receipt of order, with shipping terms set as FOB Origin. Delivery is directed to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination, governed by FAR 52.246-2 and specific sampling methods including MIL-STD-1916 and MIL-STD-105/ASQ Z1.4. The procurement incorporates rigorous technical and quality standards via the DLA Master List, including requirements for source approval (RC001), tailored quality requirements (RQ001), and bare item marking (RQ017). Packaging must adhere to ASTM D3951 and RP001, with labeling following MIL-STD-129. While Item Unique Identification is not required, the contractor must comply with various DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of certain telecommunications equipment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0176
Solicitation SPE8ES-27-T-0176 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of adhesive, identified by NSN 8040016936581 and part number A3520059. The requirement consists of two line items, each for one quart kit of a two-part component adhesive. The material is classified as a Type I item with a non-extendable shelf life of 12 months. Delivery is required within 20 days after receipt of order, with an original required delivery date of October 27, 2026. The shipping destination is the Explosive Ordnance Disposal Group 1 in San Diego, California, with terms set as FOB Destination. The contract mandates strict adherence to hazardous materials regulations, including the Hazard Communication Standard and IP025 for packaging, marking, and shipping. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129 with special marking code 32 for shelf-life items. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act and prohibitions on covered defense telecommunications equipment. The solicitation is not a small business set-aside, though it may utilize the HUBZone price evaluation preference.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0173
Solicitation SPE8ES-27-T-0173 is for the procurement of one kit of zirconium silicate-based adhesive, identified by NSN 8040-00-062-7873. This specialized adhesive is used for bonding heating elements, insulating thermocouples, coating resistors and coils, and sealing parts in aerospace applications requiring high resistance to chemicals, thermal shock, and electricity. The kit consists of one gallon can of powder and one quart can of liquid. Delivery is required within five days after receipt of order to Kirtland AFB, New Mexico, with a required delivery date of October 27, 2026. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets and labels consistent with 29 C.F.R. 1910.1200 prior to award. Packaging must comply with MIL-STD-2073-1E and RP001, with all kit components placed in a D3 or 4G box and marked according to MIL-STD-129. The item has a non-extendable shelf life of 12 months and must be stored at temperatures between 60 and 80 degrees Fahrenheit. Inspection and acceptance will occur at the destination. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0167
Solicitation SPE8ES-27-T-0167 is issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of 18 units of adhesive, identified by NSN 8040015795107. The items are to be delivered FOB Destination to the USS CHAFEE DDG 90 with a required delivery date of October 26, 2026, and a delivery window of 20 days after the order. The adhesive is classified as a Type I item with a non-extendable shelf life of six months and must be stored between 60 and 80 degrees Fahrenheit. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets and Hazard Communication Standard labels in accordance with 29 CFR 1910.1200 prior to award. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, specifically requiring the inclusion of lot or batch numbers and conspicuous storage temperature markings on all packaging levels. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the HUBZone price evaluation preference.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0103
Solicitation SPE8ES-27-T-0103 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for one 1-pint kit of a green, two-part epoxy adhesive (NSN 8040010357848, Part Number FE6026 A/B). This adhesive is specifically designed for bonding metal to metal, wood to wood, and honeycomb to metal in prefabricated buildings. The item is classified as a Type I Code H item with a non-extendable shelf life of 12 months and must be stored at temperatures between 60 and 80 degrees Fahrenheit. Delivery is required within 20 days after order, with the destination for shipping, inspection, and acceptance being NIWC Atlantic in Hanahan, South Carolina. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, which must include the lot or batch number and Special Marking Code 32. Because the adhesive is a hazardous material, the contractor must comply with IP025 and the Hazard Communication Standard (29 CFR 1910.1200 et seq). Kit components must be cushioned in a single box with a detailed contents list, and palletization must follow RP001 requirements. All quotes must be submitted via the DIBBS system, and payment will be processed electronically through Wide Area WorkFlow. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and combating trafficking in persons.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 325520
New
DIBBS
Silver Adhesive (NSN 8040011055610) SupplierThis subcontract involves the supply of specialized silver adhesive for prime contractors working on Defense Logistics Agency Troop Support procurement projects. The supplier is responsible for manufacturing or sourcing Type I silver adhesive that meets NSN 8040011055610 specifications, delivered as four completed bipak kits. Each kit must contain 2.5 grams of material along with a separate catalyst and maintain a minimum shelf life of six months. Compliance requirements include providing safety data sheets and hazard labels in accordance with 29 CFR 1910.1200. The project falls under NAICS code 325520 and is managed by the Department of Defense. The performance location is designated as APO 96367, with a response deadline set for October 28, 2026.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0163
Solicitation SPE8ES-27-T-0163, issued by the Defense Logistics Agency on October 23, 2026, is for the procurement of 12 kits of yellow adhesive, identified by NSN 8040012685916 and part number MERECO XL-389T. Each kit consists of an 8 oz base clear (Part A) and an 8 oz activator (Part B). The items are designated as critical application items with a non-extendable shelf life of six months and must be stored at or below 77 degrees Fahrenheit. Delivery is required FOB Destination to Marine Aviation Logistics Squadron 14 in Cherry Point, North Carolina, with an original required delivery date of October 21, 2026, and a delivery window of 20 days after order. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets and compliant hazard communication labels per 29 CFR 1910.1200 prior to award. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001), specifically utilizing Special Marking Code 32 for shelf-life items. Inspection and acceptance will occur at the destination. The procurement is not a small business set-aside, though it may utilize the HUBZone price evaluation preference. All quotes must be submitted via the DIBBS portal, and invoicing is required through the Wide Area WorkFlow system.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0161
Solicitation SPE8ES-27-T-0161 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support Construction and Equipment for the acquisition of silver adhesive, identified by NSN 8040011055610. The requirement consists of four kits, each containing 2.5 grams of material in bipak kits with a separate catalyst. This item is classified as a Type I product with a non-extendable shelf life of six months and must be stored between 60 and 80 degrees Fahrenheit. Delivery is required within 20 days after receipt of order, with a final required delivery date of October 23, 2026, shipping to destination points in Okinawa, Japan. Due to the hazardous nature of the material, the contractor must comply with strict safety and packaging standards, including the submission of Safety Data Sheets and hazard communication labels per 29 CFR 1910.1200 prior to award. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with conspicuous temperature warnings on all containers. The contract incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered telecommunications equipment. Inspection and acceptance will occur at the destination, and invoicing must be processed electronically via Wide Area WorkFlow.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE4A5-27-T-1735
Solicitation SPE4A5-27-T-1735 is for the procurement of two 12-ounce cartridges of a thermally conductive, electrically insulating silicone adhesive, sealant, or potting compound, identified as Parker-Hannifin Corporation P/N 65-01-1641-0000 (NSN 8040-01-334-7599). The material is a Type I item with a non-extendable shelf life of six months and must be stored at 60 to 80 degrees Fahrenheit under Storage Code D. Delivery is required within 20 days after order, with an original required delivery date of October 19, 2026, to a freight shipping address in Sigonella, Italy. The contract mandates strict adherence to quality and packaging standards, requiring original manufacturer unit packaging and labeling in accordance with MIL-STD-129, including lot or batch numbers. Because the material is hazardous, the contractor must provide Safety Data Sheets and OSHA hazard warning labels for approval by technical personnel prior to award. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331. Invoicing and payment must be processed through the Wide Area Workflow system. This is not a small business set-aside and falls under NAICS code 325520.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
SLED
ALDOT, Pavon-Annual Agreement Crack Repair FY2027
Solicitation # SRC0000037301
The Alabama Department of Transportation is establishing a sole source annual agreement for the procurement of Pavon repair materials for Fiscal Year 2027. The contract covers polymer-based repair liquids designed for potholes and cracks, specifically requiring a material that functions in cold weather and utilizes a gluing polymer to prevent sliding or cracking during hot weather. The valid period for this agreement is from October 1, 2026, to September 30, 2027, with the possibility of annual renewals for up to five years or until a total contract cost of 25,000 dollars is reached. The agreement is governed by the Standard Terms and Conditions for Quick Quotes from the State of Alabama, with the City of Montgomery serving as the sole venue for litigation. Key requirements for suppliers include registration with the Alabama Secretary of State for foreign entities, enrollment in the e-Verify program, and certification of tax compliance under the Code of Alabama. Award evaluation is based on pricing, cost realism, and supplier qualifications, which may include professional licenses and insurance certificates. The contract allows for approved price increases not exceeding 5 percent of the annual cost and stipulates a 300 dollar per day penalty for unavailable amounts due.
G41 Procurement

POSTED

4 days ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 325998
New
DIBBS
Supply of Adhesive Hardener (NSN 8040-01-519-6329)
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336415
New
DIBBS
Supply of Bearing Assembly (NSN 2010010761147)
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A0-27-T-0320
Solicitation SPE4A0-27-T-0320 is a fixed-price procurement issued by the DLA Weapons Support Aviation Supply Chain for the supply of eight machine bolts (NSN 5306-01-422-8262). The contract is issued under the First Destination Transportation program with a required delivery date of September 28, 2026, and shipping terms set as FOB Origin. The items must be manufactured according to the current revision of the applicable military or consensus non-government part standard. Offers utilizing additive manufacturing are ineligible for award. Quality assurance is stringent, requiring manufacturers to maintain inspection systems compliant with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Inspection and acceptance will occur at the origin, with sampling conducted per MIL-STD-1916 or ASQ H1331. Required deliverables include a Certificate of Quality Compliance and adherence to DLA packaging requirements (RP001) and marking standards (MIL-STD-129). The procurement is not a small business set-aside, though a price evaluation preference is provided for certified HUBZone small business concerns. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements is mandatory.
Precision Turned Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
GEAR ASSEMBLY
Solicitation # SPE4A0-27-T-0321
Solicitation SPE4A0-27-T-0321 is a fixed-price procurement issued by the Defense Logistics Agency for two gear assemblies, identified by NSN 6660-00-330-9248. This is a Foreign Military Sales requirement for Taiwan, with delivery to the General Depot of Naval Supplies in Kaohsiung City. The delivery timeframe is five days after receipt of order, with FOB, inspection, and acceptance all occurring at the point of origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging data, and RP001 for palletization. Quality assurance sampling must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Technical requirements are further governed by the DLA Master List (RA001), and the contractor must comply with NAVAIR aircraft launch and recovery equipment traceability. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity and safeguarding standards.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE4A0-27-T-0314
Solicitation SPE4A0-27-T-0314 is a procurement request issued by the Defense Logistics Agency for two lock washers, identified by NSN 5310-01-538-5792. The contract requires delivery to Cedar Falls, Iowa, with an original required delivery date of October 19, 2026, and a delivery window of five days after the award. This is not a small business set-aside, and the procurement falls under NAICS code 332722. The terms are established as FOB Origin, with both inspection and acceptance occurring at the destination per FAR 52.246-2. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and ASTM D3951 for packaging, while ensuring compliance with DLA packaging requirements and the DLA Master List of Technical and Quality Requirements. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Additionally, the offeror must comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment, and must certify that no covered telecommunications equipment is provided. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
GEAR ASSEMBLY
Solicitation # SPE4A0-27-T-0322
Solicitation SPE4A0-27-T-0322 is for the procurement of two gear assemblies, identified by NSN 6660-00-330-9248, for the Defense Logistics Agency. The requirement specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of August 22, 2024. Shipping is FOB Origin, and the final destination is the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Both inspection and acceptance are to take place at the point of origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for shipment marking. Sampling must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances if MIL-STD-105/ASQ Z1.4 is used. Bare item marking must include the contract number, NAWC CAGE, and part number. Additionally, the contractor must comply with mercury-free requirements and NAVAIR aircraft launch and recovery equipment traceability. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A0-27-T-0302
Solicitation SPE4A0-27-T-0302 is a fixed-price request for the procurement of one flat washer, identified by NSN 5310-01-678-2128, issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys. The item must be delivered within five days of the award to the US Army at Fort Riley, Kansas, with shipping terms set as FOB Origin under the First Destination Transportation program. The procurement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and requires adherence to technical data from basic drawing NR X14F3 AMSC. Quality assurance is stringent, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331, with destination inspection and acceptance. Packaging must comply with RP001 and MIL-STD-129, though the material has no shelf life requirement and does not require Item Unique Identification. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on covered telecommunications equipment.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A0-27-T-0319
Solicitation SPE4A0-27-T-0319 is a fixed-price contract issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys for the procurement of five hexagon head cap screws, identified by NSN 5305-01-707-2045 and part number ISO4017-M8X40-8.8-ZN8/U/T0. The items are to be delivered FOB Origin to Fort Stewart, Georgia, with a required delivery date of September 16, 2026, and a delivery window of five days after the award. This acquisition is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. The contract mandates strict adherence to technical and quality standards, including ISO 4017 Revision 6 and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the prohibition of hexavalent chromium.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 324191
New
DIBBS
GREASE, UTILITY
Solicitation # SPE4A0-27-T-0318
This fixed-price solicitation, issued by the DLA Weapons Support Aviation Supply Chain, is for the procurement of utility grease, identified as a critical application item and a commercial off-the-shelf product. The requirement is for one box containing ten 400-gram cartridges, with an original required delivery date of October 16, 2026. Delivery is set for Tinker AFB, Oklahoma, and must be shipped via the fastest traceable means, specifically prohibiting the use of parcel post. The contract mandates strict adherence to quality and safety standards, including destination inspection per FAR 52.246-2 and sampling methods aligned with MIL-STD-1916 or ASQ H1331. Because the material is hazardous, the contractor must comply with IP025 for packaging and shipping, and all unit containers must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Additional requirements include supply chain traceability documentation, FAA airworthiness approval, and marking compliance with MIL-STD-129. Invoicing must be processed electronically through the Wide Area Workflow system.
Petroleum Lubricating Oil and Grease Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A0-27-T-0306
Solicitation SPE4A0-27-T-0306 is a federal procurement issued by the Defense Logistics Agency for the supply of one flat washer, identified by NSN 5310124212013. This is not a small business set-aside and falls under NAICS code 332722. The required delivery date is October 22, 2026, with a delivery timeframe of five days after award. Shipping is FOB Origin, with the final destination located at Camp Lejeune, North Carolina. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-130N for physical identification. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Additionally, the contractor must meet CMMC Level 2 self-assessment requirements and comply with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Payment and receiving reports are to be processed electronically via the Wide Area WorkFlow system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY-SWIT
Solicitation # SPE4A0-27-T-0301
Solicitation SPE4A0-27-T-0301 is issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys for the procurement of two units of Cable Assembly-Swit, identified by NSN 6150-01-733-1778. The requirement is not a small business set-aside, though a price evaluation preference is available for SBA-certified HUBZone small businesses. Delivery is required within five days after receipt of order, with the place of performance and delivery located in Vilseck, Germany. Inspection and acceptance will occur at the point of origin. The contract mandates strict quality and technical compliance, requiring manufacturers to maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan. Due to the nature of the technical data, offerors must possess an approved JCP certification and DLA authorization to access export-controlled data subject to ITAR or EAR regulations. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific requirements for caps or plugs on one end. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment compliance, and safeguarding covered defense information. Offerors must also disclose the use of any non-domestic materials and certify compliance regarding covered defense telecommunications equipment.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A0-27-T-0316
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS