Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hardware Manufacturing and Supply

Active

International

Response Deadline08/31/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of National Defence for the Government of Canada is seeking a subcontractor for the manufacturing and supply of new, unrefurbished hardware components. The scope of work includes the production of chassis, motors, sensors, power systems, and protective armor specifically designed for robotic targets. This opportunity was posted on August 10, 2026, with a response deadline of August 31, 2026. The contract falls under NAICS code 332999 and the place of performance is located in Québec.

General Info

Canada DND seeks subcontractor for robotic target hardware manufacturing in Quebec by August 31.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

Québec, CAN

Set-Aside

NONE

Documents

This scope was carved out of W0106-26L011/A.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Robotics targets

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 10

subcontract

Response DeadlineAug 31

Submission deadline

Response Deadline

08/31/2026, 04:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of new, unrefurbished hardware components including chassis, motors, sensors, power systems, and protective armor for robotic targets.

Similar Contracts

Same NAICS industry code

Surge Production Capacity for Priority Defense DeliveriesThis subcontract, titled Surge Production Capacity for Priority Defense Deliveries, is issued by the Defense Logistics Agency under the Department of Defense. The agreement focuses on the rapid production and fulfillment of National Stock Number items that carry Defense Priorities System ratings, specifically designed to operate under surge conditions. The contract utilizes NAICS code 332999 and provides for scalable production capacity to meet urgent defense needs. A key financial provision of the agreement is the application of a 10 percent price premium to account for the accelerated requirements and surge capabilities necessary for these priority deliveries.

Defense Logistics Agency

POSTED

DEADLINE

Supply of BRACKET, TOW HOOK (NSN: 2510-01-679-5764)This subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture and delivery of 17 tow hook brackets for military vehicles. The items are identified by National Stock Number 2510-01-679-5764 and must adhere to specific unit specifications and pricing requirements. The contract falls under NAICS code 332999 and was posted on August 17, 2026. It is managed through the Department of Defense to ensure the supply of critical vehicle components meeting military standards.

Defense Logistics Agency

POSTED

DEADLINE

Hydraulic Parts Kit Manufacturing and AssemblyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture, assembly, and delivery of a complete hydraulic parts kit for C-130 aircraft systems, identified by NSN/Part 1650004747241. The scope of work encompasses comprehensive component sourcing, rigorous quality assurance protocols, and adherence to military-standard packaging requirements to ensure operational readiness. The contract is categorized under NAICS code 332999 and was posted on August 17, 2026. It focuses on the technical execution of aircraft system components to meet specific military specifications for the C-130 fleet.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture and Supply of Fluid Filters (NSN 2945014833263 / Part 728872-3)This subcontract with the Defense Logistics Agency under the Department of Defense involves the precision manufacturing, quality control, packaging, and delivery of 391 aerospace-grade fluid filters. The specific components are identified as Part 728872-3 with NSN 2945014833263. Due to their designation as Critical Safety Items, these filters require zero tolerance for variance to ensure absolute adherence to technical specifications. The contract falls under NAICS code 332999 and is managed through the Defense Logistics Agency.

Defense Logistics Agency

POSTED

DEADLINE

O-Ring Manufacturing and Supply (Standard NSN Items)This subcontract involves the manufacture and supply of standard O-rings under FSC 5331 for the Defense Logistics Agency within the Department of Defense. The contractor is responsible for producing items that meet specific MIL-SPEC requirements, ensuring rigorous quality assurance, and managing the packaging and delivery of goods to DLA New Cumberland, Pennsylvania. The contract is categorized under NAICS code 332999 and was posted on August 17, 2026. It focuses on the delivery of standard National Stock Number items to support military logistics and operational needs.

Defense Logistics Agency

POSTED

DEADLINE

Surge Production Capacity for Defense ComponentsThe Defense Logistics Agency has established a subcontract for the Surge Production Capacity for Defense Components to ensure the rapid-scale manufacturing of NSN items during contingency operations. Operating under the Surge eCAP, this agreement allows for the accelerated production of critical components to meet urgent defense needs. A key financial provision of the contract includes a 10 percent price premium applied specifically to quantities ordered under surge requirements. The contract falls under NAICS code 332999 and is managed by the Department of Defense to maintain operational readiness through scalable manufacturing capabilities.

Defense Logistics Agency

POSTED

DEADLINE

Military Packaging and Preservation ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on the military packaging and preservation services of electronic components. The scope of work requires the preservation, packaging, and marking of these components within contamination-controlled environments, strictly adhering to the standards set by MIL-STD-2073-1E and MIL-STD-129. The contract is categorized under NAICS code 332999 and was posted on August 17, 2026. It establishes the technical requirements for ensuring electronic components are properly protected and identified for military logistics and transport.

Defense Logistics Agency

POSTED

DEADLINE

Surge-Capable Defense Component ManufacturingThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on the rapid-response production and delivery of surge-designated defense components. The agreement is structured to support DPAS-rated orders, emphasizing accelerated timelines and time-definite delivery requirements to ensure critical components are provided quickly. Classified under NAICS code 332999, the contract ensures that manufacturing capabilities are aligned with urgent defense needs. The engagement is managed through the Defense Logistics Agency to maintain a responsive supply chain for essential military hardware and components.

Defense Logistics Agency

POSTED

DEADLINE

Linear Actuating Cylinder Parts Kit SupplyThis subcontract, issued by the Department of Defense Land Supply Chain, involves the manufacture, packaging, and delivery of precision linear actuating cylinder parts kits. The requirements are categorized under CLINs 0001, 0002, and 0003 for use in defense or industrial systems. The project falls under NAICS code 332999 and is designated for performance at FPO 96349. The solicitation was posted on August 17, 2026, with a response deadline of August 28, 2026. Interested parties must submit their proposals by this date to be considered for the supply of these critical components.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Gasket Supply and DistributionThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply, packaging, labeling, and delivery of gaskets, specifically identified by NSN 5330013769670 and manufacturer part number 64442F. The contract is categorized under NAICS code 332999 and was posted on August 17, 2026. All deliverables must strictly adhere to DLA specifications, including MIL-STD-129 and all applicable federal hazardous material labeling requirements. The agreement ensures that the procurement and distribution of these components meet the rigorous standards set by the Department of Defense for military supply chains.

Defense Logistics Agency

POSTED

DEADLINE

Barostatic Housing Manufacturing – Initial Development or Test Lot (2,000 units)This subcontract opportunity with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the manufacturing of 2,000 barostatic housing units. The project is centered in San Diego, California, and is categorized under NAICS code 332999. Given the low production volume and high per-unit cost, this effort is likely intended for initial development, qualification, or prototype testing. Interested parties must respond by August 25, 2026, following the posting date of August 17, 2026. The contract focuses on engineering-heavy production to support specialized housing requirements for defense applications.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Barostatic Housing Manufacturing – Lower Volume Lot (10,000 units)This subcontract involves the manufacture of 10,000 barostatic housing units to serve as a secondary or alternate supplier under a Defense Logistics Agency contract. Managed by the Department of Defense through the ASC Supplier Oper AE and AF Div, the project falls under NAICS code 332999. The performance of the contract will take place in San Diego, California. Interested parties must respond by the deadline of August 25, 2026, following the posting date of August 17, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Logistics and Delivery ServicesThis subcontract for Logistics and Delivery Services, issued by the Department of National Defence for the Government of Canada, involves the transportation and delivery of milling machines to a location in Ontario. The scope of work includes the crating, handling, and necessary coordination with the installation team to ensure the equipment is delivered and positioned correctly. The opportunity was posted on August 17, 2026, with a response deadline of September 4, 2026. Classified under NAICS code 484121, the contract focuses on specialized freight transportation and logistics within Ontario, excluding the National Capital Region.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Technical Documentation and Training ServicesThis subcontract with the Government of Canada's Department of National Defence involves the development of technical manuals and the delivery of operator and maintenance training for personnel on milling machine operations. The work is categorized under NAICS code 611430 and is to be performed in Ontario, excluding the National Capital Region. The opportunity was posted on August 17, 2026, with a response deadline of September 4, 2026. Interested parties can find further details through the CanadaBuys tender notice system.

Professional and Management Development Training

POSTED

DEADLINE

Installation of Milling MachinesThis subcontract involves the on-site installation, alignment, calibration, and commissioning of five milling machines for the Department of National Defence. The work is to be performed at a facility located in Ontario, outside of the National Capital Region. The solicitation was posted on August 17, 2026, with a response deadline of September 4, 2026. The project falls under NAICS code 811211 and is managed by the Government of Canada.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Supply of Milling MachinesThe Department of National Defence for the Government of Canada is seeking a subcontractor for the procurement and delivery of five industrial milling machines. The equipment must strictly adhere to provided technical specifications and meet specific Canadian content requirements. The solicitation was posted on August 17, 2026, with a response deadline of September 4, 2026. The project falls under NAICS code 333515 and the place of performance is designated as Ontario, excluding the National Capital Region.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Uncrewed Aircraft System - Light

Solicitation # W8703-270009/A

The Department of National Defence is soliciting a General Purpose Uncrewed Aircraft System (GPUAS) for light land forces, with the requirement to deliver a minimum of 80 systems by March 1, 2027, to 7 CF Supply Depot in Edmonton, Alberta. The system must support a broad spectrum of military operations including Intelligence, Surveillance, and Reconnaissance (ISR), force protection, targeting, strike missions, situational awareness, and training. Key technical specifications include a maximum take-off weight of 5 kg or less, an endurance of at least 30 minutes with an electro-optical/infrared payload, a dash speed exceeding 55 km/h, and a service ceiling of at least 8,000 feet ASL, all measured under ISA conditions. The system must comply with Canadian and international standards including ISO 2533:1975, DND and CF airworthiness directives, and must incorporate cybersecurity measures such as secure boot, authenticated software, no external kill switches, no undocumented data exfiltration pathways, and prohibit critical components manufactured in adversary nations, including flight controllers, radios, cameras, and ground control stations. The procurement follows a Phase Bid Compliance Process and is restricted to Canadian Suppliers who meet stringent eligibility criteria, including a permanent place of business in Canada, tax registration, and employment of Canadian personnel. Bidders are required to complete the Canadian Content Attestation Form to quantify Canadian Value-Added, which accounts for 25% of the award evaluation, alongside Technical Merit (50%) and Price-per-Unit (25%). The highest combined score determines award selection, with ties broken by the highest Canadian Value-Added score. All submissions must be in English or French and sent exclusively via email to tanya.mckenzie@forces.gc.ca by August 25, 2026. Bidders must structure proposals into three sections: Technical Offer, Financial Offer, and Offer Submission Forms, including mandated documents such as the Offeror Declaration and Canadian Content Attestation. Delivery must be made Delivered Duty Paid under Incoterms 2020 to the specified Edmonton location, with packaging adhering to environmentally preferred standards, ISPM 15 wood packaging rules, and controlled goods marking requirements. The contract is governed by the Defence Protections Act and includes warranty terms of 12 months post-acceptance, 30-day payment terms after invoice receipt, and potential late payment interest at the average rate plus 3

Aircraft Manufacturing

POSTED

DEADLINE

RCEMES Milling Machines

Solicitation # W2037-26-0076/A

The Department of National Defence is seeking the purchase of milling machines under solicitation number W2037-26-0076/A. This federal requirement is subject to a preference for Canadian goods and services, with the place of performance located in Ontario, excluding the National Capital Region. The procurement process is managed by contracting authority Aaron Pound. Interested parties must submit their responses by the deadline of September 4, 2026. Submissions are accepted in either of Canada's official languages, and the government retains the right to negotiate with suppliers throughout the procurement process.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

1250 kVA Shore Power Autotransformer for CCG AOPS

Solicitation # RFQ-CCG-AOPS-2026-001

The Department of National Defence, on behalf of the Canadian Coast Guard, is seeking quotes for the design, manufacture, testing, and delivery of one 1250 kVA three-phase autotransformer. The equipment is required to convert 450 VAC primary shore power from Department of National Defence facilities to 600 VAC secondary power for Arctic and Offshore Patrol Ships. The unit must be copper-wound with Class 220 insulation, an impedance of less than 4 percent, and a CSA Type 3R enclosure finished in ANSI 61 grey. A critical requirement is that the transformer must fit within an ISO 668 Type 1C 20-foot freight container and not exceed a maximum weight of 8,000 kg to ensure compatibility with shipboard crane lifting capacities. The selected contractor must maintain an ISO 9001 certified Quality Management System and perform Factory Acceptance Testing at an ISO/IEC 17025 certified facility. Deliverables include the autotransformer and a comprehensive electronic PDF documentation package containing FAT reports, electrical schematics, arrangement drawings, and operation and maintenance manuals. Delivery is required within 14 weeks of contract award to the NC5 Jetty in Halifax, Nova Scotia, under Delivered Duty Paid terms. This request for quote is issued for planning and estimation purposes and does not constitute a formal offer or guarantee of a contract award.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Washing and Drying Machines

Solicitation # W0501-27-M011/A

The Department of National Defence is soliciting bids for the procurement of laundry equipment to support live-in military personnel at 5 CDSB Gagetown. The requirement consists of 10 front-load washing machines, 15 top-load washing machines, 16 gas drying machines, and 20 electric drying machines. All units must feature stainless steel components, front-facing controls, and specific capacity and dimension requirements, with a minimum one-year warranty for parts and labour. The contract is awarded to the compliant offer with the lowest evaluated price, based on a pass/fail assessment of mandatory technical criteria. The successful contractor must deliver the equipment Delivered Duty Paid to the Building H7 warehouse in Oromocto, New Brunswick, by March 31, 2027. All shipments must adhere to environmentally preferable packaging specifications, requiring materials to be reusable, returnable, or recyclable. Payment will be made on a fixed-price basis, with undisputed invoices paid within 30 days. The contract period runs from the date of award through March 31, 2027, and is managed by Contracting Authority Ann Marie MacDonald.

Major Household Appliance Manufacturing

POSTED

DEADLINE

Static Shelving System

Solicitation # W0501-27-M040/A

The Department of National Defence is soliciting a firm fixed price contract for the supply, delivery, and installation of a modular static shelving system for the 5th Canadian Division Support Base Gagetown Personnel Support Services in Oromocto, New Brunswick. The required system totals 67.5 feet and consists of six specific sections ranging from 2 to 12 feet. Each section must feature nine open-face levels, two movable dividers per level, retractable work shelves, full perimeter panels, and hinged locking doors with padlock attachment points. All materials must be new and defect-free, with a final delivery and installation deadline of March 31, 2027. The procurement process utilizes a pass/fail technical evaluation based on mandatory criteria M1 through M11, followed by a financial evaluation in Canadian dollars. Delivery is required on a Delivered Duty Paid (DDP) Incoterms 2020 basis to Building J7, Room B234. The contract emphasizes environmental sustainability, requiring reusable, returnable, or recyclable packaging. While there are no specific security clearance requirements, the contractor must maintain accounting records for seven years post-payment and adhere to Canada's Code of Conduct for suppliers. Proposals must be submitted electronically to the contracting authority, Ann Marie MacDonald, by the specified deadline.

Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

DEADLINE

Cartridge, 9mm Luger JHP Ammunition

Solicitation # W8486-260493/A

Canada is soliciting the procurement of 9mm Luger Jacketed Hollow Point (JHP) ammunition for use by domestic law enforcement personnel through a firm requirement of 1,200,000 cartridges to be delivered to CFAD Dundurn, Saskatchewan, and 600,000 cartridges to CFAD Angus, Ontario, no later than July 1, 2027. An optional quantity of up to 2,400,000 additional cartridges may be ordered in two separate optional delivery windows: 720,000 to Dundurn and 480,000 to Angus between September and December 2029, and another 720,000 to Dundurn and 480,000 to Angus between September and December 2031. All ammunition must be new production, less than 12 months old at delivery, and conform to strict technical specifications including a maximum power factor of 150, minimum projectile penetration of 30.48 cm, and minimum expansion diameter of 0.560 inches. The ammunition must comply with SAAMI Z299.4-2015, CIP, and AEP-97 M-CMOPI standards, and be packaged in UN-certified reusable metal containers compliant with STANAG 4280, with each container not exceeding 23 kg gross weight. Packaging must also meet ISPM 15 wood treatment standards, and all items must be properly labeled with UN shipping information, NATO Stock Numbers, lot identifiers, and explosive hazard labels per U.N. Model Regulations. The contract operates under a Delivered Duty Paid (DDP) term, requiring the contractor to bear all costs and risks until delivery at the designated Canadian Forces Ammunition Depots. Technical compliance is mandatory and evaluated on a pass/fail basis with no weighting; award will follow the Lowest Evaluated Price with Mandatory Technical Criteria (LPTA) method. Contractors must be eligible under Canadian procurement policies, including compliance with the Controlled Goods Program, and must certify absence of forced labor, adherence to international sanctions, and alignment with ISO 9001:2015 quality management systems. All documentation must be submitted electronically by August 20, 2026, to Trevor.Clark@forces.gc.ca, and invoices must be sent electronically to ContractAdmin.DQA@forces.gc.ca with required accounting

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

Logistics and Integrated Packaging ServicesThe Department of National Defence of the Government of Canada is seeking a subcontractor for Logistics and Integrated Packaging Services under NAICS code 493190. This contract involves the coordination of factory-integrated packaging for cylinders and crates, ensuring secure loading and the application of bilingual labeling. The scope of work includes all necessary shipment preparations required for delivery to the Montreal CFS Depot. The opportunity was posted on August 15, 2026, with a response deadline of August 31, 2026. Performance of these services will take place within Canada. Interested parties can find further details through the CanadaBuys procurement portal.

Other Warehousing and Storage

POSTED

DEADLINE

Oxygen-Cleaning and Certification ServicesThe Department of National Defence of the Government of Canada is seeking a subcontractor to provide oxygen-cleaning and certification services. This contract focuses on the third-party verification of oxygen-clean manufacturing processes to ensure compliance with CGA G-4.1 and MIL-STD-1330E standards. The scope of work includes conducting audits, performing cleaning validation, and delivering certification reporting. The opportunity was posted on August 15, 2026, with a response deadline of August 31, 2026. The services will be performed within Canada under NAICS code 541380. Interested parties can find further details through the CanadaBuys portal.

Testing Laboratories and Services

POSTED

DEADLINE