Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazard Communication and Labeling Compliance

Active

Federal

Response Deadline08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the development and submission of hazard warning labels and safety data sheets that fully comply with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 for hazardous materials involved in manufacturing or packaging processes. All documentation must accurately reflect the chemical hazards, precautionary measures, and emergency response information as mandated by federal regulations to ensure workplace safety and defense supply chain compliance. The work is to be performed for the Department of Defense through the Aviation Supply Chain, with performance located at Tobyhanna, Pennsylvania, zip code 18466-5050. This is a total small business set-aside under NAICS code 541690, exclusively available to small businesses certified by the SBA, and is structured as a subcontract. Responses must be submitted by August 4, 2026, by 5:00 PM ET, with the solicitation originally posted on July 27, 2026, and accessible through the DIBBS portal.

General Info

Small business subcontract for OSHA and DFARS-compliant hazard labels and safety sheets at Tobyhanna, PA, due August 4, 2026.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

TOBYHANNA, PA, 18466-5050, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develop and submit hazard warning labels and safety data sheets compliant with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 for hazardous materials used in manufacturing or packaging.

Similar Contracts

Same NAICS industry code

Construction Safety Services IDIQThe Port of Seattle has established a Construction Safety Services IDIQ contract to proactively manage safety across its construction projects, addressing heightened legal responsibilities and increased site activity. This program is designed to ensure that construction operations proceed without disrupting Port functions while maintaining the highest standards of worker and public safety, responding to evolving court rulings that impose stricter obligations on owners to guarantee safe practices. The initiative reflects a commitment to preventive oversight, continuous improvement, and liability mitigation in a high-risk operational environment. The contract, classified under NAICS code 541690, is forecasted for issuance with primary point of contact Sue Yi and project manager Bruce Gamble available for coordination. It will support the Port’s Construction Management division in securing qualified service providers who can deliver comprehensive safety planning, monitoring, training, and compliance services across all construction sites within the Port’s jurisdiction. While specific scope details are not yet finalized, the IDIQ structure allows for multiple awards and flexible task orders to accommodate varying project needs, ensuring consistent safety protocols are applied regardless of project scale or location.

Construction Management

POSTED

DEADLINE

Accessibility Compliance & Testing Support

Florida School for the Deaf and the Blind

POSTED

DEADLINE

Hazardous Materials Compliance and Safety Data ManagementThe contract pertains to the management and submission of Material Safety Data Sheets and the proper labeling of hazardous materials to ensure compliance with state regulations. The work involves maintaining accurate and up-to-date documentation for all hazardous substances used or stored at the designated location in Lowell, Massachusetts, with a focus on meeting legal and safety standards. The contractor is responsible for monitoring regulatory changes, ensuring all materials are correctly labeled, and promptly submitting required MSDS documentation to relevant state authorities as mandated. This is a subcontract opportunity under NAICS code 541690, with a response deadline of August 28, 2026, at 4:00 PM. The contract is managed by the Massachusetts agency under Finance & Procurement, and performance is required at the Moody Street location in Lowell with ZIP code 01854. All activities must align with state-specific hazardous materials handling requirements, and the contractor must demonstrate expertise in regulatory compliance, documentation systems, and safety protocols to meet the terms of the agreement.

COCC1 - Finance & Procurement

POSTED

DEADLINE

Electrical Permitting & Inspection Coordination

MS DEPT of MILITARY

POSTED

DEADLINE

in about 1 month

Hazardous Materials Compliance & Safety Data Sheet (SDS) Management

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data SupportThe contract titled Hazardous Materials Compliance & Safety Data Support requires the provision and ongoing maintenance of Material Safety Data Sheets and ensures all hazardous material labeling adheres strictly to OSHA and DLA standards. This subcontract is specifically set aside for Women-Owned Small Businesses and is classified under NAICS code 541690, which covers other scientific and technical consulting services. The work must be performed at Tinker Air Force Base with a zip code of 73145-8000, and proposals must be submitted by August 10, 2026, following a posting date of July 29, 2026. The contract is managed by the Department of Defense under the organization name Construction & Equipment Manu & Con and will be accessed via the DIBBS platform. Compliance with federal safety regulations and accurate documentation of hazardous substances are central to fulfilling this requirement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Hazardous and Radioactive Materials Compliance & Labeling

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires comprehensive management of hazardous materials including identification, preparation of safety data sheets, and strict adherence to OSHA and DFARS regulations for all shipments. The work demands thorough understanding of federal safety and defense supply chain standards to ensure materials are properly classified, documented, and transported in full compliance with applicable laws. All activities must align with the Department of Defense’s maritime supply chain requirements as managed by the MARITIME SUPPLY CHAIN ESOC BUYS division, with performance expected to meet rigorous federal procurement standards. The solicitation is classified as a subcontract under NAICS code 541690, indicating a focus on other scientific and technical consulting services related to environmental and safety compliance. Respondents must submit their proposals by August 10, 2026, with no set-aside provisions specified. The contract does not designate a specific place of performance or point of contact, suggesting the work may be performed remotely or across multiple locations as needed to support defense logistics. All documentation and compliance measures must be maintained to support audit readiness and regulatory inspection by federal authorities.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA Hazard Communication standards and DFARS 252.223-7001 for the handling and management of hazardous materials, with specific obligations to generate accurate Safety Data Sheets and apply proper hazard labeling in accordance with regulatory requirements. All activities must align with federal mandates for chemical safety communication, ensuring that personnel and downstream users receive consistent, standardized hazard information. The work is to be performed at a designated location in Dickson, Tennessee, with a zip code of 37055-0248, and is classified under NAICS code 541690 for other scientific and technical consulting services. This is a subcontract opportunity posted by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MANU & CON, with a response deadline of August 10, 2026. No set-aside type is specified, and the solicitation number is SPE8EF26T1526. The contractor must be prepared to meet all documentation, labeling, and procedural requirements tied to hazardous material handling as defined by both occupational safety and defense acquisition regulations. Compliance is mandatory and will be subject to verification throughout the performance period.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Hazard Communication and Safety Data Sheet (SDS) ComplianceThe contract requires strict adherence to OSHA’s Hazard Communication Standard 29 CFR 1910.1200, mandating accurate hazard labeling and the proper preparation and dissemination of Safety Data Sheets for all chemicals handled under the agreement. Compliance must extend to all subcontractors involved, ensuring that hazard information flows seamlessly through the supply chain without interruption or omission. The scope centers on maintaining regulatory integrity in chemical safety documentation and communication, with expectations that all materials, containers, and documentation meet federal standards for clarity, consistency, and accessibility. This subcontract is issued under the NAICS code 541690 and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and is accessible via the DIBBS platform. While specific performance locations and point of contact details are not provided, the requirement for SDS flow-down to subcontractors implies a broad operational footprint across multiple sites and vendors. All parties must be prepared to demonstrate full compliance with federal hazard communication protocols, including training, documentation, and recordkeeping, as a condition of contract execution.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance & Documentation

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

Packaging and Labeling Compliance ServicesThe contract requires the provision of comprehensive packaging and labeling services that strictly adhere to DLA RP001 and OSHA 29 CFR 1910.1200 standards, ensuring full compliance with hazardous communication requirements. Services include repackaging of materials, application of HazCom-compliant labels, and seamless integration with established quality inspection protocols to maintain product integrity and regulatory adherence throughout the process. The work is centered at Robins Air Force Base, Georgia, with the contractor responsible for coordinating all activities to meet the specified technical and safety benchmarks. This is a subcontract under NAICS code 561910, issued by the Aviation Supply Chain within the Department of Defense. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026. All offerings must align with the operational environment at the designated place of performance and incorporate rigorous quality control measures. The contract emphasizes precision in labeling, safety compliance, and alignment with military logistics protocols, requiring vendors to demonstrate proven capability in handling regulated materials under federal standards.

Packaging and Labeling Services

POSTED

DEADLINE

Domestic and International Logistics / Transportation SupportThe contract seeks providers to deliver comprehensive domestic and international logistics and transportation services, with a core focus on FOB-origin coordination and the proper submission of ocean bills of lading to ensure seamless shipment tracking and documentation. Compliance with U.S.-flag vessel requirements mandated by the Buy American Act is a critical component, meaning all ocean freight must be carried on vessels flagged under the United States to meet federal procurement standards. The work will support military supply chain operations originating from Robins Air Force Base, Georgia, and will encompass both domestic movements and international shipments requiring adherence to strict regulatory frameworks. Subcontractors must be prepared to operate under the NAICS code 483111, which classifies this work under water transportation of freight, and will be responsible for end-to-end coordination of cargo from origin points through final delivery, ensuring all documentation, customs procedures, and compliance obligations are met without delay. The solicitation is open for responses until August 6, 2026, and is issued under the Department of Defense’s Aviation Supply Chain office, emphasizing the need for reliable, secure, and legally compliant logistics solutions to sustain defense-related operations. Failure to comply with U.S.-flag vessel mandates or to properly execute FOB-origin logistics will result in non-conformance and potential contract termination.

Deep Sea Freight Transportation

POSTED

DEADLINE

Threaded Insert (NSN 5305-01-678-6288, Part 114AS) Manufacturing and SupplyThe contract calls for the manufacture and delivery of threaded inserts identified as Part 114AS with the National Stock Number 5305-01-678-6288, requiring full compliance with military specifications including MIL-STD-1916 for quality assurance and DLA RP001 for packaging standards. All products must meet OSHA hazard communication requirements to ensure safe handling and documentation of chemical and material risks associated with production and use. The work is classified as a subcontract under NAICS code 332722, focused on screw machine products manufacturing, and performance is centered at Robins Air Force Base, Georgia, with a delivery destination code of 31098-1887. The solicitation was posted on July 29, 2026, and responses are due by August 6, 2026, with the contract managed under the Aviation Supply Chain division of the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

INSERT, SCREW THREAD

Solicitation # SPE4A1-26-T-2497

The contract pertains to the procurement of 198 units of a screw thread insert identified by NSN 5325-00-786-6185 under solicitation SPE4A1-26-T-2497, with a delivery requirement of 80 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and apply in their revision state as of the solicitation issue or award date depending on acquisition size. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; attributes are categorized as critical, major, or minor and assigned verification levels or AQLs accordingly. Configuration changes require formal engineering change proposals, and requests for deviations or waivers must be submitted. Documentation for source approval is mandated under RC001, and export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unlicensed export or disclosure to foreign persons, including foreign nationals within the U.S. Only DLA contractors with approved JCP certification, completed training on handling export-controlled data, and approved access via the DLA questionnaire are permitted to handle such data under DFARS 252.225-7048. Physical identification and removal of government markings from non-accepted items are required per RQ011 and RQ017. The contract is administered by the Aviation Supply Chain under the Department of Defense with performance to occur at Robins AFB, Georgia, and inquiries are directed to Jade Stringfield at the provided contact information.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-2496

The contract is for the procurement of 362 flat washers identified by NSN 5310-00-543-4804 and part number CVC754-548D17, supplied by Triumph Aerospace Structures, LLC. The item is classified as a critical application product, and no approved technical data package is currently available, rendering the specification proprietary or insufficient for competitive sourcing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA requirements, and palletization must follow RP001 guidelines. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise directed. The certificate of conformance is authorized unless suspended by a quality assurance letter. Delivery is FOB origin with a 146-day lead time, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. Packaging and labeling must reflect the specified unit of issue and quantity per unit pack, with all shipments directed to DLA Distribution Depot Hill in Hill AFB, Utah, under DLA transportation protocols. The original required delivery date is August 11, 2019, with a needed ship date of July 12, 2019.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Quality Inspection and Acceptance TestingThe contract requires the performance of final inspection and acceptance testing at Fort Wainwright, Alaska, to verify that all delivered items meet prescribed quality standards. Inspection and testing must be conducted in accordance with either MIL-STD-1916 or ASQ H1331 sampling plans, ensuring statistical rigor and compliance with military specifications. The work is scoped to occur at the destination point, and successful completion hinges on demonstrating conformance through documented results using these accepted methodologies. This is a subcontract under the NAICS code 541330, issued by the Aviation Supply Chain within the Department of Defense, with a response deadline of August 5, 2026. The place of performance is specifically identified as Fort Wainwright with ZIP code 99703-7000, indicating that all activities must be executed on-site at this military installation. Bidders must be prepared to travel or operate at this location to fulfill inspection obligations, and failure to adhere to the specified sampling standards will result in non-acceptance of the delivered goods.

Engineering Services

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the provision of preservation, packaging, palletization, and marking services for circuit card assemblies in strict adherence to MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring military-grade readiness and traceability. All work must meet rigorous defense logistics requirements for protection, labeling, and handling of sensitive electronic components intended for operational deployment. The services are to be performed at Fort Wainwright, Alaska, with a delivery deadline of August 5, 2026, and are solicited as a subcontract under NAICS code 493190 for warehousing and storage. The contract is managed by the Aviation Supply Chain within the Department of Defense and is available for bidding via the DIBBS platform.

Other Warehousing and Storage

POSTED

DEADLINE

Circuit Card Assembly ManufacturingThe contract seeks the manufacture and delivery of four high-reliability circuit card assemblies meeting stringent military and Defense Logistics Agency standards, encompassing full lifecycle responsibilities from component sourcing and procurement through assembly, functional testing, and final packaging. All work must adhere to specified technical and quality controls to ensure mission-critical performance, with delivery required at Fort Wainwright, Alaska, under a subcontract arrangement within the Department of Defense’s Aviation Supply Chain framework. The NAICS code 334418 indicates classification under Electronic Component and Product Manufacturing, underscoring the specialized nature of the technical requirements. Responses are due by August 5, 2026, with the solicitation posted on July 28, 2026, providing a seven-day window for qualified vendors to submit proposals. The contract is not subject to a specific set-aside designation, meaning all eligible contractors may respond, and the place of performance is fixed at the specified Alaska location. Compliance with military-grade specifications for durability, environmental resilience, and traceability is non-negotiable, and successful bidders must demonstrate experience with defense-level electronics manufacturing, rigorous inspection protocols, and the ability to meet exacting documentation and reporting standards required by the Defense Logistics Agency.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

PUMP, FUEL, ELECTRICA

Solicitation # SPE4A1-26-T-2469

The contract pertains to the procurement of four electrical fuel pumps with NSN 2910-01-732-6937 under solicitation SPE4A1-26-T-2469, issued by the Defense Logistics Agency’s Aviation Supply Chain. Deliveries are required within 20 days after award, with FOB Origin pricing terms and delivery to Assault Craft Unit 4 at Building 3821, 2155 11th Street, Virginia Beach, VA 23459-3018. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the use of specific preservation methods, container types, and packaging codes, while explicitly excluding Item Unique Identification per DFARS 252.211-7003(c)(1)(i). All shipments must be transported via traceable means, prohibiting parcel post, and palletization must adhere to DLA’s RP001 requirements. The contract includes robust cybersecurity and information safeguards requiring compliance with CMMC Level 2 self-assessment, NIST SP 800-171, and DFARS 252.204-7012 for safeguarding covered defense information, with mandatory cyber incident reporting. Mercury or mercury-containing compounds are prohibited from direct contact with delivered hardware except for specific functional applications such as batteries, fluorescent lamps, sensors, and weapons systems, with such exempt items requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. Inspection and acceptance occur at destination under zero-defect sampling standards per MIL-STD-1916, ASQ H1331, or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment eligibility, sustainable procurement, hazardous material safety, subcontracting, contract changes, and payment terms, including accelerated payments to small business subcontractors. The total contract value appears to be $4.00 based on available line item data, though this is likely incomplete or misformatted, as the unit price is not specified. The solicitation requires electronic submission via DIBBS by July

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in about 15 hours

CIRCUIT CARD ASSEMBLY

Solicitation # SPE4A1-26-T-2495

This contract pertains to the procurement of four circuit card assemblies identified by NSN 5998-00-881-0949 and part number 7104170-00 under solicitation SPE4A1-26-T-2495, with delivery required within 20 days to Fort Wainwright, Alaska. The items must conform to stringent technical, quality, and packaging standards, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stipulated, and quality verification levels are assigned based on attribute criticality. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with applicable revisions tied to the solicitation or award date depending on acquisition size. The contractor must adhere to CMMC Level 2 self-assessment requirements and ensure materials meet equivalence standards for legacy specifications like MIL-S-13949, which was canceled but still guides material selection. All assemblies are to be delivered FOB origin with no variance allowed in quantity, and acceptance occurs at the destination. The point of contact for questions is Allison Hugel of the DLA, and the contract requires adherence to DLA packaging, transportation, and supply chain protocols specified in associated procedural notes.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance and CMMC Assessment SupportThe contract seeks support for achieving CMMC Level 2 compliance through a comprehensive self-assessment process, requiring detailed documentation, system hardening, and full adherence to NIST SP 800-171 and DFARS 252.204-7012 standards for protecting covered defense information. The effort involves implementing technical and procedural controls to meet cybersecurity requirements established for contractors handling sensitive defense data, with a focus on readiness for third-party evaluation. The work must be performed at Tobyhanna, Pennsylvania, and is structured as a subcontract under a total small business set-aside, ensuring eligibility is restricted to small businesses as defined by the SBA. The solicitation is categorized under NAICS code 541512 for computer systems design services and is managed by the Department of Defense under the Aviation Supply Chain office. Proposals must be submitted by August 4, 2026, with the opportunity publicly posted on July 27, 2026. While no specific point of contact is listed, interested parties can access additional details through the DIBBS portal using the provided link. The scope emphasizes practical, actionable steps toward compliance rather than advisory services, requiring hands-on implementation and validation of security controls aligned with federal defense cybersecurity mandates.

Computer Systems Design Services

POSTED

DEADLINE

Specialized Packaging and Palletization ServicesThe contract requires specialized packaging, preservation, and palletization services for indicator subassemblies in full compliance with military standards, specifically utilizing moisture barriers and desiccants to protect components from environmental degradation. All items must be labeled according to MIL-STD-129 requirements, ensuring traceability and uniformity across the defense supply chain. The work must be performed at the designated place of performance in Tobyhanna, Pennsylvania, with Zip code 18466-5050, and is classified as a total small business set-aside under the SBA program, meaning only small businesses are eligible to bid. The NAICS code 493190 categorizes this as other warehousing and storage, indicating the focus is on logistics and protective handling rather than manufacturing. The solicitation was posted on July 27, 2026, with a response deadline of August 4, 2026, and is issued under the Department of Defense’s Aviation Supply Chain through a subcontract mechanism.

Other Warehousing and Storage

POSTED

DEADLINE