Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Chemical Formulation and Packaging

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and packaging of hazardous medical chemicals, specifically a 10% Potassium Hydroxide Solution, under strict adherence to OSHA, DOT, and military labeling standards to ensure safety and regulatory compliance throughout production and handling. All work must be performed in facilities that meet the rigorous requirements for handling dangerous substances, with packaging and labeling conforming to federal and defense-specific guidelines to facilitate safe transportation and use in military medical settings. Performance is mandated at Fort Bliss, Texas, with a tight response deadline of August 3, 2026, and the solicitation is issued under the NAICS code 325199 for other chemical product and preparation manufacturing. The contract is classified as a subcontract within the Department of Defense’s Medical Supply Chain structure, indicating it supports critical logistical operations for military medical readiness. While no set-aside type is specified, all bidders must demonstrate capability in handling hazardous materials, compliance with military labeling protocols, and the ability to deliver consistent, high-integrity product batches under stringent quality controls.

General Info

Manufacture and package 10% potassium hydroxide per OSHA, DOT, and military standards at Fort Bliss by August 3, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325199 - All Other Basic Organic Chemical ManufacturingView NAICS

Place of Performance

FORT BLISS, TX, 79918-2527, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and packaging of hazardous medical chemicals such as 10% Potassium Hydroxide Solution in compliance with OSHA, DOT, and military labeling standards.

Similar Contracts

Same NAICS industry code

Supplier of Raw Materials for Sealing CompoundThe contract requires the supply of base resins, catalysts, and other chemical components essential for formulating polysulfide sealants, ensuring consistent batch quality and compliance with Qualified Products List standards. All materials must meet exacting technical specifications to support critical defense applications, with an emphasis on reliability and performance under demanding operational conditions. The procurement is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and the goods will be delivered to a designated performance site at Joint Base Elmendorf-Richardson, Alaska, with a zip code of 99506-4406. Suppliers must respond by the deadline of August 3, 2026, and the solicitation is classified under NAICS code 325199 for other chemical product and preparation manufacturing. The contract does not specify set-aside status, meaning it is open to all eligible vendors regardless of size or certification status.

Defense Logistics Agency

POSTED

DEADLINE

Hydroxyl-terminated polybutadiene, low odor

Solicitation # N0017426Q1039

The U.S. Navy’s Naval Surface Warfare Center Indian Head Division is soliciting quotes under simplified acquisition procedures for a firm fixed price purchase order to acquire hydroxyl-terminated polybutadiene, low odor (R45 HTLO), designated under NAICS code 325199 with a small business size standard of 1,250 employees. This solicitation is a total small business set-aside and will be evaluated on a lowest price technically acceptable basis, with award anticipated without discussions, though the Government reserves the right to conduct them if necessary. Technical acceptability is determined solely by compliance with the specifications outlined in WS 23148D, including hydroxyl content between 0.78–0.88 meq/g, moisture not exceeding 0.06%, viscosity of 45–55 poise at 30°C, and nonvolatile matter of at least 99.5%. Offers must include a Certification Data Report and Certificate of Completion verifying conformance, along with a Safety Data Sheet. Delivery is required in two phases: a 500 mL first article sample and a production quantity of 2,050 pounds, with all deliveries due by July 30, 2026, to Indian Head, Maryland under FOB destination terms. Packaging and labeling must adhere to MIL-STD-129 for shipping and MIL-STD-130 for item-level marking, including unique identification via Data Matrix barcodes with CAGE code and serial information. All offers must be submitted electronically by August 7, 2026, at 8:00 AM EST to Francine Keys and Marlene Ridgell, with a cover sheet containing the official company name, point of contact, DUNS number, and CAGE code. Contractors must comply with numerous federal and defense clauses, including prohibitions on inverted domestic corporations, convict labor, trafficking in persons, and foreign supply chain risks such as the Xinjiang region and Maduro regime. Cybersecurity requirements under DFARS 252.204-7012 and CMMC levels are mandatory, and organizational conflicts of interest must be disclosed within 14 days. Payment will be processed through Wide Area WorkFlow, and final acceptance occurs solely at the destination upon government testing and certification.

Nswc Indian Head Division

POSTED

DEADLINE

Supply of MON-3ULTRA LOW PropellantThe contract involves the manufacture and delivery of 35,000 pounds of ultra-low contaminant MON-3 propellant, a specialized chemical formulation requiring stringent purity controls to meet exacting performance and safety standards. All production processes must adhere to enhanced contamination mitigation protocols to ensure the final product complies with the ultra-low contaminant specification, which is critical for applications where impurities could compromise system integrity or operational reliability. The supplier is responsible for implementing full hazardous materials compliance throughout every phase, including handling, storage, transportation, and documentation, in accordance with federal and industry regulations for dangerous goods. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, carries a solicitation identifier of SPE60126R0310 and was posted on July 27, 2026, with a response deadline of August 26, 2026. The work falls under NAICS code 325199 for other chemical product and preparation manufacturing, and the place of performance is not specified, indicating flexibility in location as long as delivery and compliance requirements are met. The supplier must be prepared to demonstrate capability in producing high-purity chemical propellants under tightly controlled environmental conditions and must be able to provide full traceability and quality assurance documentation for the entire production batch.

Defense Logistics Agency

POSTED

DEADLINE

Supply of MON-3LC PropellantThe contract calls for the manufacture and delivery of 35,000 pounds of low-corrosivity MON-3LC propellant over a 54-month period, with the initial shipment followed by annual deliveries of 7,000 pounds each year. The propellant must meet strict specifications for low corrosivity to ensure compatibility and safety in military applications. The solicitation is issued as a subcontract under the NAICS code 325199, indicating it pertains to other chemical product and preparation manufacturing. The Defense Logistics Agency, representing the Department of Defense, is the contracting entity, and responses are due by August 26, 2026, with the opportunity posted on July 27, 2026. Performance of the contract is not tied to a specific location, and no set-aside provisions apply, meaning the contract is open to all qualified bidders without preference based on business size or ownership.

Defense Logistics Agency

POSTED

DEADLINE

Supply of MON-25 Propellant (Dinitrogen Tetroxide)The contract entails the manufacture and delivery of 500 pounds of MON-25 propellant, also known as dinitrogen tetroxide, to be furnished over a 54-month period beginning with an initial shipment of 100 pounds followed by annual deliveries to meet the total requirement. All material must fully comply with applicable military specifications to ensure performance and safety standards for defense applications. The work is structured as a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with performance obligations spanning multiple years to align with strategic supply needs. The solicitation was posted in July 2026 with a response deadline in August 2026, indicating a formal procurement timeline for qualified suppliers to bid on the production and logistics responsibilities.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Chem Crest Solvaclean ELC Solvent (55-Gallon Drum)The contract calls for the supply of one 55-gallon drum of Chem Crest Solvaclean ELC solvent, to be used specifically in the secondary cleaning stage of the Solvac system. The requirement is part of a subcontract under the Department of Defense, managed by NSWC Crane, and performance is designated for Crane, Indiana, with a ZIP code of 47522. The solicitation was posted on July 27, 2026, and responses must be submitted no later than August 3, 2026, at 8:00 a.m. The NAICS code 325199 identifies this as a chemical manufacturing activity. No set-aside criteria or point of contact information is specified, and the obligation is tied to a single delivery of the solvent for operational use in a defined industrial cleaning process.

POSTED

DEADLINE

Supply of Chem Crest Solvaclean IPA Solvent (55-Gallon Drums)Two 55-gallon drums of Chem Crest Solvaclean IPA solvent are to be supplied, specifically formulated for use with the Solvac cleaning system and fully compliant with all hazardous material handling and labeling requirements. The contract is a subcontract under the Department of Defense, managed by NSWC Crane, with performance required at Crane, Indiana, zip code 47522. The solicitation was posted on July 27, 2026, and responses are due by August 3, 2026, at 8:00 a.m. The NAICS code 325199 identifies the procurement within the broader chemical manufacturing sector, indicating the need for specialized chemical supply expertise consistent with defense logistics standards.

POSTED

DEADLINE

Sodium Chlorite 31% Solution Supply – Livingston Plant DeliveryThe contract requires the supply of 40,000 pounds of sodium chlorite solution at a 31 percent concentration, to be delivered F.O.B. at the Livingston Plant. The product must strictly comply with NSF-61 and ANSI/NSF 60 standards, ensuring it meets stringent quality and safety requirements for use in water treatment applications. Delivery timing and compliance with these certifications are critical to fulfilling contractual obligations, as nonconforming material will be rejected. The solicitation is classified as a subcontract under NAICS code 325199, and is issued by the Trinity River Authority of Texas, with bids due by August 13, 2026, at 5:00 PM. The place of performance is specified as the Livingston Plant, though exact location details are not provided in the data, and no set-aside provisions are indicated for small businesses or other categories. Proposers must ensure full adherence to the technical specifications and delivery terms to be considered for award.

Trinity River Authority of Texas

POSTED

DEADLINE

Sodium Chlorite 31% Solution Supply – Huntsville Plant DeliveryThe contract calls for the supply of 400,000 pounds of sodium chlorite solution at 31% concentration, to be delivered F.O.B. at the Huntsville Plant with full compliance to NSF-61 and the Safe Drinking Water Act standards, ensuring the product meets stringent safety and quality requirements for potable water applications. The offering is structured as a subcontract under NAICS code 325199, indicating it involves other chemical manufacturing activities, and is procured by the Trinity River Authority of Texas as the contracting entity, with the bid response deadline set for August 13, 2026, at 5:00 p.m. The solicitation was posted on July 23, 2026, and all materials must be submitted through the provided online portal to be considered valid.

Trinity River Authority of Texas

POSTED

DEADLINE

Electrical Insulating Oil Supply and PackagingThe contract seeks the supply, packaging, labeling, and delivery of 15 containers of electrical insulating oil that meets hazardous material handling requirements and military packaging standards. The product must be prepared and shipped in full compliance with regulations governing dangerous goods to ensure safe transportation and storage, reflecting the stringent protocols expected by the Department of Defense. All work is to be performed in alignment with the NAICS code 325199, indicating the chemical manufacturing sector, and the delivery must reach the specified place of performance in Tracy, California, with a zip code of 95304-5000. The solicitation is structured as a subcontract opportunity under the Construction & Equipment MRO_svc I program, with a response deadline of August 3, 2026, and was posted on July 23, 2026. While no set-aside designation is specified, bidders must be prepared to demonstrate capability in handling hazardous materials, adhering to military packaging specifications, and delivering on tight logistical timelines. The contract does not list a point of contact, and interested parties are directed to the DIBBS portal for further details and submission requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supplier of Raw Materials / Electronic ComponentsThe contract seeks suppliers to provide DFARS-compliant raw materials and sub-components critical to the manufacturing of connectors, including insulating compounds, metal contacts, and molding materials, all of which must meet strict defense acquisition regulations. The solicitation is issued under the NAICS code 325199 and is structured as a subcontract under the Department of Defense’s Active Devices Division, with performance required at the specified location in Tracy, California, 95304-5000. All materials must fully comply with DFARS requirements to ensure domestic sourcing and supply chain integrity for defense applications. The opportunity was posted on July 23, 2026, with a response deadline of August 3, 2026, indicating a tight timeline for potential vendors to submit their proposals. There is no set-aside designation specified, meaning the contract is open to all qualified suppliers regardless of business size or classification. The procurement is managed through the DIBBS platform, and interested parties must respond via the provided UI link to be considered. Compliance with material specifications, regulatory adherence, and timely delivery are essential for award consideration.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Element Assembly Oil (NSN: 2910012247438)The contract requires the supply of 74 units of Element Assembly Oil designated by NSN 2910012247438, specifically formulated to meet ASTM D3951 standards and federal military preservation and packaging specifications. This material is intended for use in defense-related applications and must comply with stringent quality and performance requirements to ensure proper function and longevity under operational conditions. The delivery must be completed at the specified place of performance in San Diego, California, with a zip code of 92136-3581, and the work falls under NAICS code 325199 for other chemical product and preparation manufacturing. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, indicating a limited window for qualified suppliers to submit proposals. The contract is classified as a subcontract and is issued by the Department of Defense through the Land Supplier Ops Engines division, which manages logistics and supply chain functions for military equipment. While no set-aside type is specified, the procurement is open to eligible contractors capable of meeting the technical and regulatory demands of military-grade oil. Interested parties must access the official DIBBS portal via the provided link to obtain full details and submit bids before the deadline.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

CONTROL, GLUCOSE

Solicitation # SPE2DS-26-T-283Y

The contract specifies the procurement of Prodigy Glucose Control Solution, Low Level 1, in 4 mL units, compatible with all Prodigy brand glucose meters and intended solely for in vitro diagnostic use. The product must have a guaranteed shelf life of 24 months, with no more than three months elapsed from the date of manufacture to the date of delivery to the government. Storage must be at room temperature and freezing is strictly prohibited. The solution is regulated by the FDA and must be sourced from approved manufacturers, specifically Prodigy Diabetes Care LLC or Cardinal Health 200, LLC, with their designated part numbers. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere strictly to DLA’s Packaging Requirements for Procurement, with commercial packaging in accordance with ASTM D3951 unless otherwise overridden by DLA's technical requirements. The unit of issue is each, and packaging must protect against damage and ensure safe transport via common carriers at the lowest possible rate. The contract includes two line items totaling two units, each priced at $2.00 and $4.00 respectively, with firm fixed prices and zero tolerance for quantity variance. Delivery is required within five days of order placement, FOB destination, with inspection and acceptance occurring at the point of delivery. Shipments must use the fastest traceable means and are prohibited from using parcel post. Two distinct delivery addresses are specified: one at Fort Bragg, North Carolina, and another in Melrose, Massachusetts, each with assigned tracking codes and logistical identifiers. The material is not classified as hazardous per Fed-STD-313 and must be labeled with the appropriate government identification, with strict compliance required for all packaging, marking, and palletization standards. The solicitation number is SPE2DS-26-T-283Y, with a response deadline of August 4, 2026, and required delivery dates set for July 30 and July 31, 2026, depending on the delivery point.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

DRESSING, CHEST SEAL WO

Solicitation # SPE2DS-26-T-283J

The chest seal dressing is a specialized medical device designed for rapid deployment in trauma scenarios involving open chest wounds. It features a three-channel pressure relief vent system that prevents air from entering the chest cavity during inhalation while allowing trapped air and blood to escape during exhalation, reducing the risk of tension pneumothorax. The design includes a fail-safe mechanism ensuring functionality even if two of the three vents become obstructed. The dressing utilizes advanced adhesive technology to maintain a secure seal under extreme environmental conditions and is equipped with a large red-tipped pull tab for single-step peel-and-apply application, enabling easy repositioning or venting if needed. It is packaged in a foil pouch with tear-notches, measuring 7.75 inches square when undeployed, and expands to a 6-inch by 6-inch coverage area upon application. Each unit weighs 1.37 ounces and is issued individually. The product must have a shelf life of 60 months with no extensions permitted, and no more than nine months may have elapsed from the manufacturer’s production date to delivery to the government. Labeling must comply with Medical Marking Standard No. 1, including clear indications of the date of manufacture, expiration or retest date, contract number, and lot number. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in appropriate exterior packaging to ensure safe transit at the lowest feasible cost. All packaging and marking must conform to DLA requirements, superseding older military standards. The item is identified by NSN 6510-01-624-0840, with a purchase request for two units under contract SPE2DS-26-T-283J, requiring delivery within 20 days to Fort Bragg, North Carolina. Bidders must specify their source and part number, and all technical specifications referenced are governed by the DLA Master List of Technical and Quality Requirements.

All Other Health and Personal Care Retailers

POSTED

about 11 hours ago

DEADLINE

CUSHION, CRUTCH

Solicitation # SPE2DS-26-T-284Q

The contract pertains to the procurement of 300 pairs of sponge crutch cushions measuring 8 inches by 1.5 inches, identified by NSN 6515-00-777-7340, under solicitation SPE2DS-26-T-284Q. Bidders must specify the source and part number being supplied, and all supplies must comply with applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or award date depending on the acquisition type. Packaging must adhere to DLA packaging standards and the Medical Marking Standard No. 1, which replaces MIL-STD-129; each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest cost to Fort Leonard Wood, Missouri. All medical acquisitions require commercial packaging, and government identification must be removed from non-accepted supplies. The solicitation was posted on July 29, 2026, with a response deadline of August 4, 2026, and delivery is required within 20 days of award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Marcos Aliaga listed as the primary point of contact.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-283T

The contract specifies the procurement of 2 packages, each containing 10 individually packaged tracheal tubes, for a total of 20 units. Each tube is a nasal and oral tracheal tube with a Murphy design, featuring a cuff, a beveled tip, and is constructed of plastic polyvinyl chloride, with an inside diameter of 7 mm and a French size of 28. The tubes are sterile, disposable, and must have a minimum shelf life of 72 months from the date of manufacture, with no more than 10 months having elapsed between manufacture and delivery to the government. Packaging must comply with DLA requirements, and the item is governed by specific technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. The purchase is tied to NSN 6515-01-047-5368 under solicitation SPE2DS-26-T-283T, issued by the Department of Defense’s Medical Supply Chain for the Nellis Air Force Base location. The response deadline is August 4, 2026, with a required delivery within five days of award, and the point of contact is Chandler Alvarez of DLA.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

INTRODUCER KIT, CATH

Solicitation # SPE2DS-26-T-284W

The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, containing a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and a 2-0 nylon suture with reverse cutting, 30 inches in length. The kit is identified by NSN 6515-01-663-2913 with a quantity of 2 KT, and a purchase request number of 7017663257, requiring delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date depending on acquisition size. Packaging must meet DLA standards, and all supplies must be free of government identification if not accepted. Bidders must clearly state the source and part number being offered. The solicitation number is SPE2DS-26-T-284W, posted on July 29, 2026, with responses due by August 4, 2026, under NAICS code 339113 for medical equipment manufacturing, administered by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required in Williamsburg, Virginia, 23185-5830.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

CATHETERIZATION KIT, UR

Solicitation # SPE2DS-26-T-283U

The contract specifies the procurement of a urethral catheterization kit, item NSN 6515016152124, packaged as a unit of issue (PG) containing ten individual kits. Each kit includes a 16 Fr Foley catheter with a 2000 mL anti-reflux valve bag, sterile drape, underpad, specimen container, five prep balls, povidone-iodine solution, gloves, a prefilled 10 cc sterile water syringe, forceps, and a prefilled 10 cc lubricant syringe. The product must have a mandatory 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. All packaging must comply with DLA Packaging Requirements, including sealed unit containers for protection, commercial shipping containers for safe transport at the lowest rate, and precise labeling per Medical Marking Standard No. 1, superseding MIL-STD-129. The kits are regulated by the FDA and require confirmation through EBS referral. Shipments are destined for two locations: USS Delaware (SSN 791) in FPO AE and Fort Bliss, TX, with delivery required within five days and no quantity variance allowed. Delivery is FOB destination, with inspection and acceptance occurring upon arrival. Packaging must adhere to ASTM D3951 only where not overridden by higher-priority DLA technical requirements, and palletization must follow RP001. Freight must be shipped by traceable means, prohibiting parcel post, and markings must include NSN, manufacturer and CAGE codes, manufacture and expiration dates, contract number, and lot number. The contract covers two CLINs, both at $1.00 per unit, with a required delivery date of July 30, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

WOUND CLOSURE KIT, FACI

Solicitation # SPE2DS-26-T-283P

The Wound Closure Kit, Facial is a sterile, latex-free, disposable tray designed for facial wound closure procedures, containing essential instruments and supplies to facilitate healing by approximating wound edges. The kit includes four gauze sponges, one metal tissue forcep, one curved mosquito hemostat, one fine-point tissue scissors, one polybag with twist tie, one polylined towel, one polylined fenestrated towel, a pack of three iodophor PVP prep swabs, and one alcohol swab. It is packaged and supplied as a case of twenty units, with a mandated shelf life of eighteen months from the date of manufacture, none of which may have expired prior to delivery. No more than two months may have elapsed between the date of manufacture and the date of delivery to the government. The item is governed by specific technical and quality requirements detailed in the DLA Master List of Technical and Quality Requirements, and must comply with DLA packaging standards. The NSN is 6515-01-710-5754, with a purchase request number of 7017656207, and delivery is due within twenty days of award. The solicitation SPE2DS-26-T-283P was posted on July 29, 2026, with responses due by August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF team, with performance designated to APO 09094-3219. Bidders must specify their source and part number, and all supplies must adhere to government identification removal procedures for non-accepted items.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

COVER, ELECTRONIC THERM

Solicitation # SPE2DS-26-T-284J

The contract pertains to the procurement of disposable covers for electronic thermometer probes, designed to prevent breakage and cross-contamination, constructed from plastic and provided in units of 100 per package. The item is identified by NSN 6515-01-373-8659 with a quantity of one package and a delivery requirement of 20 days ADO. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date, depending on the acquisition size. The product must adhere to DLA packaging standards and include removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-284J, is open for bids until August 4, 2026, with responses directed to the Department of Defense's Medical Supply Chain MD Surg FSF, and performance is required at Norfolk, Virginia. Bidders must clearly state the source and part number being offered, and the item is classified under NAICS code 339112, indicating its origin in medical device and equipment manufacturing.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

SPHYGMOMANOMETER

Solicitation # SPE2DS-26-T-283R

The contract specifies the procurement of two aneroid adult sphygmomanometers with latex-free, durable construction featuring Gear-Free Durashock Technology and certified accuracy to within +/-3 mmHg. Each unit includes a one-piece large adult cuff sized for 12-inch arm circumference with a rotating 360-degree gauge that snaps directly into the cuff for quick changes and easy viewing from any angle. The device is designed to withstand a 30-inch drop, meeting AAMI’s shock resistance standards, and includes a premium inflation system for patient comfort. It comes with a five-year calibration warranty and is built for unmatched reliability through its integrated cuff-mounted design. The product is identified by NSN 6515-01-647-7257 and must be supplied as specified with no case. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with packaging and supply handling subject to DLA protocols including the removal of government identification from non-accepted items. Bidders must clearly indicate their source and part number. The solicitation, issued under SPE2DS-26-T-283R, requires delivery within five business days to Melrose, Massachusetts, with responses due by August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the primary point of contact Vernon Stevenson.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

CRICOTHYROTOMY SET

Solicitation # SPE2DS-26-T-283X

The CRICOTHYROTOMY SET is a specialized medical kit designed for emergency airway access, containing a No. 10 disposable scalpel, a 6.0mm cuffed tracheotomy tube, a 4-inch tracheal hook, a 10 cc syringe, and a 5.5-inch curved Kelly hemostat, all provided as a single unit. The item is identified by NSN 6515-01-618-4558 with a quantity of one unit, subject to a 20-day delivery requirement under Purchase Request 7017653338. It is governed by strict technical and quality standards referenced in the DLA Master List, with applicability determined by the solicitation or award date. The item carries a non-extendable 18-month shelf life under RS013 requirements and must comply with DLA packaging standards under RP001. Government identification must be removed from non-accepted supplies per RQ011, and the kit is subject to covered defense information protocols under RD003. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-283X by the Department of Defense’s Medical Supply Chain, has a response deadline of August 4, 2026, and requires delivery to Fort Bragg, North Carolina, 28310.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

COVER, PROBE, THERMOM

Solicitation # SPE2DS-26-T-284D

The contract specifies the procurement of 10 boxes, each containing 100 disposable clear polyethylene digital oral thermometer sheaths, for a total of 1,000 units, under NSN 6515-01-503-5351 and manufacturer part number 20633 from TIDI PRODUCTS LLC. The item is a regulated medical device subject to FDA oversight, requiring buyer confirmation via EBS referral with full manufacturer and bidder details. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in individual commercial containers, packed in suitable shipping containers to ensure safe delivery, and marked in strict accordance with the specified standard. Delivery is FOB destination within 84 days, with no quantity variance permitted and inspection and acceptance occurring at the delivery point. The procurement follows DLA packaging guidelines and unit of issue standards, with the solicitation issued under SPE2DS-26-T-284D, response deadline August 4, 2026, and performance directed to APO 96260-5479.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

CASE, DRUG, MAIN, SUPP

Solicitation # SPE2DS-26-T-283E

The contract specifies the procurement of a hard plastic drug case measuring 21.75L x 8H x 17.0W, with each unit including one lid insert and one case insert, offered as a single unit of issue. The item is not regulated by the FDA and must comply with commercial packaging standards as outlined in the procurement document, requiring each unit to be sealed in a container that protects against damage and is packed in suitable exterior shipping containers for safe delivery at the lowest carrier rate. All markings must follow Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of this standard are available through DLA Troop Support. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The supplier must provide the source and part number being offered, and the item is identified by NSN 6515-01-473-8678 and DLA part number 44000 from Fleming Industries Inc. The delivery is FOB destination with a strict five-day lead time and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must conform to MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-283E, which incorporates defense information protocols under RD003 and requires compliance with DLA packaging and removal standards for non-accepted supplies. The unit price is set at $1.00 for a single unit, and the acquisition falls under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain. All data, including response deadlines and performance location in Melrose, Massachusetts, is tied to the electronic procurement platform, and the DoD authorized unit of issue must be referenced against the official ANSI X12 conversion guide.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE