Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Material Handling and Transportation Support

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive support for hazardous material handling, packaging, and transportation in strict alignment with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and applicable Department of Transportation regulations. Central to this effort is the provision of Safety Data Sheet documentation to ensure all hazardous materials are properly identified, labeled, and managed throughout the supply chain. The contractor must ensure full compliance with regulatory frameworks governing the safe transport and storage of dangerous goods, including accurate labeling, documentation, and procedural adherence to mitigate risks during handling and transit. Performance of this subcontract is mandated at Cherry Point, North Carolina with a zip code of 28533-0021, and falls under NAICS code 488510, indicating specialized support activities for transportation. The opportunity was posted on August 3, 2026, with responses due by August 11, 2026, and is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC. This subcontract does not specify a set-aside classification, and the point of contact information is not provided, requiring proposers to engage directly through the DIBBS portal using the provided link to access full solicitation details.

General Info

Hazardous material handling and transport at Cherry Point, NC, compliant with OSHA and DOT regulations, requiring SDS documentation.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

488510 - Freight Transportation ArrangementView NAICS

Place of Performance

CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide SDS documentation and ensure compliance with hazardous material handling, packaging, and transportation requirements per 29 CFR 1910.1200 and DOT regulations if applicable.

Similar Contracts

Same NAICS industry code

Logistics and Packaging for Defense ShipmentsThe contract seeks qualified small businesses to develop and execute military-compliant packaging and shipping plans tailored for defense shipments, ensuring full adherence to DFARS freight requirements. This includes the accurate collection and submission of dimensional and weight data essential for precise transport cost modeling, which directly impacts logistics efficiency and compliance across the Department of Defense supply chain. All proposed solutions must meet strict military standards for protection, labeling, and handling during transit, with a focus on minimizing damage and ensuring timely delivery under operational conditions. This is a total small business set-aside under NAICS code 488510, exclusively reserved for small businesses as defined by the SBA, and is issued as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense. Interested parties must submit their proposals by the deadline of September 3, 2026, with the requirement to demonstrate proven experience in defense logistics, packaging certification, and compliance with federal regulations governing military transport. Performance is expected to align with DoD logistics protocols, though no specific location is designated for performance. Bidders are directed to the official DIBBS portal for full solicitation details and submission guidelines.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Freight Forwarding and Transport Coordination

US Embassy The Hague

POSTED

about 13 hours ago

DEADLINE

U.S.-Flag Vessel Logistics CoordinationThe contract seeks a subcontractor to broker and coordinate domestic freight transport using U.S.-flag vessels, with strict adherence to the Jones Act and cargo preference regulations, including the management of any necessary waivers. The work is tied to the Department of Defense's Medical Supply Chain under the Medical Supply Chain MD Surg FSF, and the primary place of performance is Camp Lejeune with a zip code of 28542-0128. The solicitation is classified under NAICS code 488510, which pertains to support activities for water transportation, signaling the need for specialized logistics expertise in maritime freight movement within U.S. domestic waters. The opportunity was posted on August 3, 2026, with responses due by August 10, 2026, and is accessible through the DIBBS portal. While no set-aside status is specified, the requirement demands compliance with federal maritime laws and operational precision to support critical medical supply logistics for military operations.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

International Freight Forwarding and FOB Origin LogisticsThe contract requires coordination of FOB origin shipments to the Israeli Ministry of Defense, encompassing full logistics management from point of origin through delivery. This includes preparing and managing all necessary export documentation, ensuring compliance with international customs regulations, and facilitating smooth customs clearance procedures in both the origin and destination countries. Transportation must be tracked end-to-end using G&B Packing Company as the designated logistics partner to provide real-time visibility and accountability throughout the supply chain. The contract is classified as a subcontract under NAICS code 488510, which pertains to cargo and freight forwarding services, and is issued by the ASC Commodities Division within the U.S. Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of August 11, 2026, indicating a tight turnaround for proposals. While specific performance location details are not provided, the primary objective centers on executing international freight movements under FOB terms, meaning the contractor assumes responsibility for all logistics and export compliance activities up to the point where goods are loaded onto the carrier at the origin. The work must be performed in strict adherence to U.S. defense export standards and international trade protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military Shipment Marking and Logistics CoordinationThe contract requires comprehensive logistics coordination and shipment preparation to ensure full compliance with MIL-STD-129 marking standards for military cargo destined for DLA at Fort Lewis. All activities must adhere to FOB Origin delivery terms, meaning the vendor is responsible for properly labeling, packaging, and documenting shipments at the point of origin with precise military specifications. This includes accurate identification, barcoding, and documentation of all items to meet DoD tracking and inventory management requirements. The work is classified as a subcontract under NAICS code 488510, indicating it involves freight transportation arrangement services supporting defense logistics operations. The solicitation is open for response until August 14, 2026, with a posting date of August 3, 2026, and is managed by the Maritime Supply Chain ESOC Buys office under the Department of Defense. Performance must occur at Fort Lewis with a ZIP code of 98433-9500, and the contractor must maintain strict adherence to DLA protocols throughout the shipment lifecycle. Although no set-aside information is provided, the nature of the work implies a high level of operational precision, regulatory compliance, and integration with existing military supply chain systems. The contract is accessible through the DIBBS platform for interested parties seeking to respond.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Logistics and Freight Management (FOB Origin, Destination Delivery)

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

International Medical Supply Logistics and FOB Destination ShippingThe contract involves end-to-end logistics for the transportation of medical hazardous supplies to Camp Carroll, Korea, under FOB Destination terms, ensuring the vendor assumes full responsibility for all shipping costs, risks, and customs clearance until the goods reach the designated final destination. This includes arranging and managing sea freight, proper packaging and labeling compliant with international hazardous material regulations, and seamless customs handling to meet U.S. and Korean import requirements. The supplier must ensure timely delivery with full documentation and adherence to stringent safety protocols for medical hazardous goods. This is a subcontract solicited by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 488510 for freight transportation arrangement. The solicitation was posted on August 3, 2026, with a response deadline of August 10, 2026, and is accessible via the DIBBS platform. The performance location is Camp Carroll in Korea, and the successful bidder must demonstrate capacity to handle sensitive medical hazardous materials through international maritime channels while meeting all regulatory and operational standards mandated by military and international authorities.

Defense Logistics Agency

POSTED

DEADLINE

Freight Forwarding and Transportation CoordinationThe contract requires coordination of international freight shipment through the designated freight forwarder V. ALEXANDER CO INC, with strict adherence to U.S.-flag vessel regulations to ensure compliance with federal maritime laws. All logistics must support FOB origin delivery terms, meaning responsibility for goods and associated costs transfers to the buyer at the point of origin, and the forwarder must manage all transport arrangements from that point onward with full traceability and documentation. The work falls under NAICS code 488510 for freight forwarding and is structured as a subcontract under the Department of Defense's Land Supply Chain organization, with performance expected to align with military procurement standards. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and is accessible through the DIBBS platform. While specific location details for performance or the contracting office are not provided, the nature of the requirement implies coordination across U.S. ports and international destinations under DOD oversight. The forwarder must maintain compliance with all applicable U.S. government transport and customs regulations, particularly those governing the use of U.S.-flagged vessels, and must document every step of the logistical chain to meet audit and reporting obligations tied to defense contracts.

LAND SUPPLY CHAIN

POSTED

DEADLINE

International Logistics and Freight ServicesThe contract entails end-to-end international freight services for the secure and compliant transport of military adhesive materials, with all logistics managed from origin to final delivery at Camp Humphreys in South Korea under FOB Destination terms, meaning the seller bears all costs and risks until the goods arrive at the destination. Services include customs clearance, utilization of the TCN tracking number WT4KD862150323 for real-time shipment monitoring, and adherence to strict packaging and marking protocols to ensure regulatory compliance and operational readiness. The work is classified under NAICS code 488510, indicating specialized freight forwarding and related logistics support, and is structured as a subcontract under the Defense Logistics Agency, a division of the Department of Defense. Performance is tied to the contractual reference SPE8ES26F73HW with award details accessible via the DIBBS portal, reflecting a formalized logistical arrangement within the U.S. military supply chain infrastructure.

Defense Logistics Agency

POSTED

DEADLINE

Supply Chain and Logistics Coordination for CONUS Delivery

Defense Logistics Agency

POSTED

DEADLINE

Transportation and Logistics (Sea/Overseas Shipment)The contract pertains to the management of ocean freight transportation for cylinder assemblies, requiring full compliance with international sea shipment regulations and the accurate preparation of all associated documentation, including ocean bills of lading. The scope centers on end-to-end logistics coordination to ensure timely, secure, and compliant overseas movement of these specialized components. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by FAR 19.5. The NAICS code 488510 identifies it within the maritime cargo support services sector. Issued by the Department of Defense’s Strategic Acquisition Program Directorate, the solicitation was posted on August 3, 2026, with responses due by August 18, 2026. The place of performance and point of contact details are unspecified, but the contract can be accessed via the DIBBS platform.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Domestic and International Shipping with U.S.-Flag Vessel ComplianceThe contract involves the transportation of 11 precision pins under a subcontract requiring strict adherence to U.S. ocean transportation laws, which mandate the use of U.S.-flag vessels when applicable for international shipping. The work falls under NAICS code 488510, indicating it pertains to support activities for maritime transportation, and is managed by the Department of Defense through DLA Fleet Readiness Southwest. Bidders must respond by the deadline of August 5, 2026, with proposals evaluated under the requirement that all ocean transport comply with federal regulations regarding vessel nationality. The place of performance and exact origin or destination are not specified, but compliance with U.S. laws governing international freight movement is a non-negotiable condition of award.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

DEADLINE

in about 16 hours

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

Solicitation # SPEFA5-26-T-0975

The contract specifies the procurement of 25 units of a cushion identified by NSN 5330-LN-002-7833 and part number SPD65E-1701-055, with a total contract value of $25.00 per unit delivered FOB destination within 48 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and must follow DLA Packaging Requirements for Procurement (RP001) and be palletized accordingly, while the material itself has no shelf life restriction. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical attributes must be verified at Level VII or AQL 0.1, major at Level IV or AQL 1.0, and minor at Level II or AQL 4.0. Inspection and acceptance occur at the destination, with no允许 variance in quantity. Delivery must be sent to the specified freight address at Cherry Point, North Carolina, with a required delivery date of August 4, 2026, and must be prepared for shipment in accordance with the defined unit of issue and packaging protocols.

Other Support Activities for Air Transportation

POSTED

about 8 hours ago

DEADLINE

Third-Party Quality Assurance and Inspection ServicesThe contract requires third-party quality assurance and inspection services to independently verify the conformance of manufactured parts against MIL-STD-1916 sampling plans and the specific requirements outlined in RQ017. This includes rigorous testing of critical attributes at an Acceptable Quality Level of 0.1, ensuring that even minimal defects are detected and documented. All instances of nonconformance must be formally reported with full traceability and documentation to support compliance and corrective actions. The work is scoped under a subcontract arrangement for the Department of Defense, specifically for the DLA Fleet Readiness Center DLA PSC, with performance expected at Cherry Point, North Carolina, ZIP 28533-0021. Interested parties must submit responses by August 11, 2026, following the solicitation issued under the NAICS code 541330 for engineering services.

Engineering Services

POSTED

DEADLINE

Military-Compliant Packaging and Palletization ServicesThe contract requires the provision of packaging, labeling, serialization, and palletization services fully compliant with MIL-STD-129 and DLA RP001 standards for defense logistics shipments. This includes rigorous adherence to UID marking requirements for individual items and container tracking, as well as the application of approved corrosion protection measures to ensure long-term readiness and preservation of military equipment during transport and storage. All processes must meet exacting Department of Defense specifications for traceability, durability, and uniformity across the supply chain. Performance is designated for Cherry Point, North Carolina, with a response deadline of August 11, 2026, and the solicitation is classified as a subcontract under NAICS code 493190. The contracting activity falls under the DLA Fleet Readiness Center DLA PSC, an agency within the Department of Defense, emphasizing the critical nature of the logistics support being procured. All deliverables must align precisely with federal military logistics protocols to support readiness and operational deployment across the defense enterprise.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Machined Bracket SupplyThe contract specifies the manufacture and delivery of a precision machined bracket with part number 65207-10016-101 and national stock number 1560LLNC08851, requiring full compliance with military standards including MIL-STD-1916 for quality assurance, MIL-STD-129 for labeling and marking, and the DLA Master List specifications. All work must be performed to meet stringent defense department requirements for dimensional accuracy, material integrity, and inspection protocols, with delivery addressed to the designated location in Cherry Point, North Carolina, 28533-0021. The solicitation is issued as a subcontract under NAICS code 332999, with a response deadline of August 11, 2026, and was posted on August 3, 2026, by the Department of Defense through the DLA Fleet Readiness Center DLA PSC.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPEFA5-26-T-0972

The contract pertains to the supply of a critical application bracket identified by part number 65207-10016-101 and NSN 1560LLNC08851, with a quantity of one unit to be delivered within 35 days to the Fleet Readiness Center DLA in Cherry Point, North Carolina. Delivery is FOB destination, with inspection and acceptance also occurring at the destination and no variance permitted in quantity. The item is non-shelf-life-coded and subject to stringent technical and quality requirements defined by the DLA Master List of Technical and Quality Requirements, which overrides any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization aligned to these directives. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. Marking of the bare item and packaging must adhere to RQ017 physical identification standards. The unit of issue is each, priced at $1.00, under solicitation SPEFA5-26-T-0972, with an original delivery date of October 17, 2026, and the solicitation was posted on August 3, 2026, with responses due by August 11, 2026.

Other Support Activities for Air Transportation

POSTED

DEADLINE

Supply Chain Compliance and Reporting (DPAS & Counterfeit Parts)The contract requires strict adherence to DPAS regulations under 15 CFR Part 700 and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.246-7007 for the detection and mitigation of counterfeit parts within the supply chain. This includes establishing documented processes for identification, quarantine, and reporting of suspicious or nonconforming components, as well as implementing comprehensive training programs for personnel involved in procurement, inspection, and logistics functions. All activities must be fully traceable, with accurate and timely reporting to ensure regulatory compliance and the integrity of defense-critical components. The subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with a submission deadline of August 7, 2026, and is linked to NAICS code 541611, reflecting its focus on management consulting services related to supply chain compliance. Performance must align with federal standards for counterfeit part prevention, demanding robust internal controls, audit readiness, and continuous improvement of detection methodologies. While specific location details are not provided, the place of performance is expected to support defense logistics operations, and all compliance measures must be operational and verifiable throughout the contract lifecycle.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThe contract requires comprehensive packaging, labeling, barcoding, and shipping preparation services for Department of Defense hardware managed by the DLA Fleet Readiness Center under the DLA PSC. All activities must strictly adhere to MIL-STD-129 and ASTM D3951 standards to ensure uniformity, durability, and compliance across military logistics. This includes the accurate application of DoD-compliant data marking to support traceability, inventory control, and receipt verification throughout the defense supply chain. The work involves end-to-end preparation of shipments to meet federal military requirements, with a focus on quality, consistency, and regulatory alignment. The solicitation is issued as a subcontract under NAICS code 493190, with a response deadline of August 7, 2026, and was posted on July 31, 2026. The place of performance and specific geographic details are not specified, indicating flexibility in location as long as contractual obligations are fulfilled. All deliverables must align with DLA’s operational standards for defense logistics, and contractors must be prepared to support the full lifecycle of hardware packaging from preparation through final shipment without deviation from mandated protocols.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Fastener Manufacturing (NAS1958 Series Bolt)The contract requires the manufacture of precision aerospace fasteners, specifically referencing NAS1958C28 bolts and other components governed by NAS1953 through NAS1970 specifications. Manufacturing must adhere to exacting dimensional, material, and performance standards mandated for aerospace applications, with comprehensive quality control measures including rigorous inspection protocols and full lot traceability from raw material origin through final delivery. All processes must comply with defense industry quality systems to ensure dimensional accuracy, surface finish, heat treatment compliance, and mechanical properties meet stringent military and aerospace requirements. This is a subcontract opportunity issued by the Department of Defense through the DLA Fleet Readiness Center, with a response deadline of August 7, 2026. The North American Industry Classification System code 332722 indicates the focus is on screw, bolt, and nut manufacturing. Performance will occur under the oversight of a defense logistics agency, though specific location details are not provided. Bidders must be prepared to meet federal subcontracting obligations, including documentation for quality assurance, compliance with defense supply chain standards, and the ability to support long-term production schedules with consistent supply chain reliability.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # SPEFA5-26-T-0947

The contract is for the procurement of two tube assemblies, identified by part number 901-060-380-101 and NSN 1560-LL-CFQ-B165, manufactured to drawing 901-060-380 with cage code 97499. Performance is required within 95 days after order, with a firm delivery deadline of December 24, 2026, and delivery must be made FOB destination to the Fleet Readiness Center DLA at Cherry Point, North Carolina. The contract is awarded under solicitation SPEFA5-26-T-0947, issued by the Defense Logistics Agency Fleet Readiness Center, and follows streamlined acquisition procedures, with pricing set at $1.00 per unit for a total value of $2.00. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging and marking must comply with MIL-STD-129 for labeling and MIL-STD-130N(1) for identification marking, including Data Matrix barcode requirements. Palletization adheres to DLA Packaging Requirements RP001, while preservation follows ASTM D3951 unless overridden by higher-priority DLA standards. Inspection and acceptance occur at the destination, with sampling conducted using MIL-STD-1916 or a zero-defect alternative plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates numerous FAR and DFARS clauses including those for cybersecurity safeguards, trafficking in persons, employment eligibility verification, sustainable products, and electronic invoicing via WAWF. Offerors must hold a valid UEI and CAGE code, and are required to represent their small business status where applicable, with no set-aside specified. The contract type is designated to be determined upon award, referencing Alternate I of FAR 52.216-1, and delivery quantities are fixed with no variance permitted. Hazardous and radioactive materials are subject to specific notification and labeling protocols, and the contractor must comply with all federal regulations governing material safety and data handling.

Other Support Activities for Air Transportation

POSTED

DEADLINE

in about 16 hours

Solicitation # SPEFA5-26-Q-0066

This contract specifies the procurement of a single NAS1958C28R bolt under part number 5306-LN0034747 with a firm fixed price and no variance in quantity allowed. The item must be delivered within 30 days after the award date to the destination specified, with inspection and acceptance occurring upon delivery. The product must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per ASTM D3951 and labeling requirements per MIL-STD-129, with precedence given to the DLA Master List when conflicts arise. Packaging must align with DLA-specific procurement guidelines, including palletization per RP001, and sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The unit of issue is each, and physical identification of the bare item must adhere to RQ017 requirements. The delivery is directed to the Fleet Readiness Center at Cherry Point, North Carolina, with the solicitation number SPEFA5-26-Q-0066 and a response deadline of August 7, 2026, with a required ship date of July 8, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Military-Compliant Packaging and MarkingThe contract requires compliance with MIL-STD-129, ASTM D3951, and the DLA Master List for the packaging and marking of delivered items, ensuring all defense logistics standards are met for military supply chain operations. Work must be performed at Cherry Point, North Carolina, with strict adherence to government-mandated labeling, identification, and packaging protocols to support readiness and traceability across Department of Defense systems. The solicitation is structured as a subcontract under NAICS code 423840, indicating a focus on wholesale trade of hardware, plumbing, and heating equipment, and is managed by the DLA Fleet Readiness Center under the Department of Defense. All proposals must be submitted by August 7, 2026, with no set-aside designation specified, leaving the opportunity open to eligible contractors without restrictions based on business size or category.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Hazardous Materials Compliance & LabelingThe contract pertains to the preparation and submission of hazard labels and Material Safety Data Sheets for hazardous materials to ensure full compliance with OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement requirements. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, specifically at the zip code 28533-0021. The work involves accurately generating and maintaining documentation that communicates chemical hazards to workers and emergency responders, aligning with federal safety and procurement mandates. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, under the NAICS code 541690, which covers other technical and scientific consulting services, indicating the specialized nature of the compliance and documentation support required.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE