Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Material Labeling and Compliance

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541620
New
SLED
850.80 Stream Mitigation Credits- Webster County
Solicitation # 645-DOTRFB-3044-2027
The Iowa agency is seeking solicitations for stream mitigation credits located in Webster County under solicitation number DASIowa-645-DOTRFB-3044-2027. This opportunity was posted on August 29, 2026, and requires responses to be submitted by the deadline of September 24, 2026, at 6:00 PM. The procurement is managed by the state of Iowa as a SLED organization. Interested parties can find further details through the provided SciQuest portal and may contact Mallory Hunter as the primary point of contact for inquiries regarding this project.
Iowa

POSTED

about 23 hours ago

DEADLINE

in 25 days
NAICS: 541620
New
Federal
FCRHC Medical Gas Evaluation and Inspection Services
Solicitation # IHS1530296
The Navajo Area Indian Health Service, under the Department of Health and Human Services, is exercising an option period for contract 75H71025P01185 regarding Medical Gas Evaluation and Inspection Services. This contract, categorized under NAICS code 541620, was originally awarded with a base period and two option periods that fell below the micro-purchase and synopsizing thresholds. The performance schedule consists of a base period from October 1, 2025, to September 30, 2026, followed by a first option period ending September 30, 2027, and a second option period ending September 30, 2028. The services are performed in Teec Nos Pos, Arizona, with administrative oversight based in Window Rock, Arizona.
Navajo Area Indian Health Svc

POSTED

1 day ago

DEADLINE

in 14 days
NAICS: 541620
New
Erosion and Sediment Control (SWPPP Implementation)Norstar Plumbing and Engineering, Inc. is seeking a subcontractor for the implementation of a Stormwater Pollution Prevention Plan. The scope of work focuses on erosion and sediment control, specifically requiring the installation of silt fencing and sediment basins, as well as the execution of regular site inspections to ensure environmental compliance. This opportunity is categorized under NAICS code 541620 and is open to certified Disadvantaged Business Enterprises, Minority Business Enterprises, and Women Business Enterprises. Interested parties must submit their responses by September 18, 2026.
Norstar Plumbing and Engineering, Inc.

POSTED

1 day ago

DEADLINE

in 18 days
NAICS: 541620
New
SLED
Specialized Technical Subconsulting (Interdisciplinary Support)
UC Davis Medical Center

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Mitigation Monitoring and Program Implementation
UC Davis Medical Center

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
CEQA/NEPA Exemption and Negative Declaration Support
UC Davis Medical Center

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Noise and Transportation Impact Studies
UC Davis Medical Center

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Air Quality and Health Risk Analysis
UC Davis Medical Center

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Cultural and Historical Resources Evaluation
UC Davis Medical Center

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Biological Resources Assessment and Monitoring
UC Davis Medical Center

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Environmental Impact Report (EIR) Preparation
UC Davis Medical Center

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Environmental Planning Consulting Services
Solicitation # 0000040219
UC Davis Health is seeking Statements of Qualifications from qualified firms to provide environmental planning consulting services for the Capital Projects team within the Facilities Planning and Development division. The selected consultants will support environmental planning functions for projects at the Sacramento Campus and other off-site locations in the greater Sacramento Region. Key responsibilities include performing environmental reviews, preparing CEQA and NEPA documents, managing mitigation monitoring, and providing strategic regulatory and editorial support. Up to two firms will be selected under a blanket professional services agreement with a total value not to exceed 3 million dollars. Interested firms must notify the university by September 29, 2026, to receive an upload link, with final submissions due by 4 p.m. on Wednesday, September 30, 2026. The scope of work encompasses various project types, including Environmental Impact Reports, tiered EIRs, exemption memos, and the implementation of project-specific construction monitoring and mitigation programs. Selected firms and their subconsultants must adhere to nondiscrimination requirements, pay prevailing wages in accordance with the California Labor Code, and comply with UC Fair Wage standards.
UC Davis Medical Center

POSTED

2 days ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The contract requires the preparation, application, and submission of hazard warning labels for packaging that contains hazardous materials, with strict adherence to OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement requirements. All labeling efforts must ensure accurate, compliant communication of chemical hazards to meet federal safety and procurement standards. The work is scoped as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, and the North American Industry Classification System code 541620 indicates the services fall under other scientific and technical consulting services. The solicitation was posted on July 16, 2026, with a response deadline of July 31, 2026, and is managed by the Department of Defense’s Land Supply Chain under a DLA procurement. Performance location details are unspecified, but compliance with all applicable federal regulations remains mandatory regardless of physical work location.

General Info

Small business subcontract for OSHA-compliant hazard label preparation under DLA procurement, due July 31, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7L1-26-U-0477.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CYLINDER ASSEMBLY, A

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Prepare, apply, and submit hazard warning labels for packaging containing hazardous materials in compliance with OSHA HCS and DFARS requirements.

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE7L1-26-U-0582
This Request for Quotations (RFQ) issued by DLA Land and Maritime is for an indefinite delivery contract to procure machine screws, identified by NSN 5305-01-466-7940. The solicitation is a total small business set-aside with an estimated annual quantity of 81 units and a contract maximum value of $350,000. The procurement includes a guaranteed minimum of 8 units and a minimum delivery order quantity of 40 units. Quotations must be submitted by August 28, 2026, for a delivery requirement of 29 days after order placement. The contract is subject to FOB Origin terms, with both inspection and acceptance occurring at the destination. Technical and quality requirements are governed by the DLA Master List, which takes precedence over standard packaging protocols like ASTM D3951. Specific requirements include adherence to MIL-STD-129 for marking and labeling, and RP001 for palletization. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific AQL levels assigned to critical, major, and minor attributes. Notably, the contract prohibits the use of additive manufacturing for the supplied parts. Compliance with various federal regulations is required, including the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area Workflow (WAWF) system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
FRAME, ACCESS HOLE
Solicitation # SPE7L1-26-T-980N
This contract, identified as solicitation SPE7L1-26-T-980N, is for the procurement of 78 units of access hole frames, specifically Electric Boat Corporation part number 24-76-3002A and NSN 5340012234409. The order is issued by the Department of Defense Land Supply Chain with a required delivery date of October 26, 2025, and a delivery window of 112 days. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination. The goods are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements RP001 and MIL-STD-129 for marking and labeling is mandatory. Depending on the hazardous material status per FED-STD-313, packaging must follow either TQ requirement IP025 or ASTM D3951, with the DLA Master List of Technical and Quality Requirements taking precedence.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 339991
New
DIBBS
SEAL
Solicitation # SPE7L1-26-U-0578
This solicitation, issued by DLA Land and Maritime under number SPE7L1-26-U-0578, is a Request for Quotations for an Indefinite Delivery Contract (IDC) to procure critical application items identified as seals (NSN 5330-00-161-0912). The procurement is a Total Small Business Set-Aside with an estimated annual quantity of 13 units, where each unit of issue equals five feet. The contract has a maximum value of $350,000, with individual orders subject to a minimum of 1 unit and a maximum of $3,500,000. Quotations must be submitted via the DLA-BSM Internet Bid Board System (DIBBS) no later than August 28, 2026. The technical requirements mandate that items be manufactured in accordance with TDP Rev A Gen 1 and Basic Drawing NR 98897 LS34296. A critical safety requirement specifies that all supplied items must be free of asbestos; any alternative materials require formal approval. Packaging must comply with MIL-STD-2073-1E and RP001, specifically requiring end items to be sealed in medium-duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117, Type II, Class C, Style 1. Marking must adhere to MIL-STD-129 and MIL-STD-130N. The contract includes various regulatory provisions, including safeguarding covered defense information, combating trafficking in persons, and compliance with the Buy American Act and Berry Amendment. Delivery is required within 63 days FOB Origin, with inspection and acceptance occurring at the destination.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7L1-26-U-0588
This Request for Quotations (RFQ) issued by DLA Land and Maritime is for an Indefinite Delivery Contract (IDC) to acquire Lock Washers (NSN 5310-01-576-3690). The solicitation is a Total Small Business Set-Aside with a maximum contract value of $350,000. While the estimated annual quantity is 10 units, the contract includes a guaranteed minimum of 1 unit and a minimum delivery order quantity of 5 units. Quotations must be submitted by August 28, 2026, to the DLA Land and Maritime Land Supply Chain. The contract specifies a 29-day delivery period with terms set as FOB Origin, though inspection and acceptance will occur at the destination. Technical and quality requirements are governed by the DLA Master List, and sampling must adhere to MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must comply with ASTM D3951 and DLA packaging requirements, while all marking and labeling must follow MIL-STD-129. Contractors are required to use the Wide Area WorkFlow (WAWF) system for electronic invoicing and must comply with various federal regulations, including cybersecurity safeguarding for covered defense information and domestic material restrictions such as the Buy American Act.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 333618
New
DIBBS
VALVE, AIR START
Solicitation # SPE7L1-26-T-979Z
This contract is for the procurement of 29 air start valves, identified by NSN 2815011798692 and part number P12612057, manufactured by Fairbanks Morse LLC. These valves are critical application items designed for use in Colt Industries S.E.M.T Pielstick 16 cylinder diesel engine model PC2.5V, which are installed on landing craft models LSD41 through LSD44. The agreement specifies a delivery timeframe of 157 days, with a required delivery date of August 10, 2027, and shipping destined for DLA Distribution San Diego. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards and MIL-STD 130 for marking. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions approved by NAVSEA. Configuration control must follow MIL-STD-973, and the shipment must be delivered FOB Origin with inspection and acceptance occurring at the destination. This is a total small business set-aside procurement under the Department of Defense Land Supply Chain.
Other Engine Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332994
New
DIBBS
ADAPTER, AMMUNITION CHU
Solicitation # SPE7L1-26-U-0581
This solicitation, issued by DLA Land and Maritime on August 14, 2026, is a request for quotations for an Indefinite Delivery Contract to acquire Ammunition Chute Adapters (NSN 1005-01-593-1255). The contract is a small business set-aside with a maximum value of $350,000 and a one-year period of performance. While the estimated annual quantity is 43 units, the contract includes a guaranteed minimum of 6 units and a minimum delivery order quantity of 10 units. Deliveries are required within 139 days after order acknowledgment, and the procurement is subject to strict manufacturing restrictions, specifically prohibiting the use of additive manufacturing unless explicitly approved. The requirement involves significant regulatory compliance, including export controls under ITAR or EAR, necessitating that contractors hold an approved US/Canada Joint Certification Program certification. Cybersecurity standards are high, requiring compliance with CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Quality assurance is mandatory, with manufacturers required to comply with SAE AS9003 or ISO 9001 standards, and inspection and acceptance will occur at the origin. Additionally, the contract incorporates domestic sourcing requirements such as the Buy American Act and the Berry Amendment, and requires electronic invoicing and payment through the Wide Area Workflow system.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L1-26-U-0577
This solicitation, issued by DLA Land and Maritime under number SPE7L1-26-U-0577, is a Request for Quotations for an Indefinite Delivery Contract (IDC) to procure power supply units (NSN 6130-01-521-1400). The procurement is designated as a Total Small Business Set-Aside with a maximum contract value of $350,000.00. The contract covers a one-year period and includes an estimated annual quantity of 29 units, with a guaranteed contract minimum of 4 units and a minimum delivery order quantity of 14 units. Delivery is required within 127 days of order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract incorporates rigorous technical, quality, and security requirements. Suppliers must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and adhere to strict mercury restrictions, prohibiting the intentional addition of mercury or mercury compounds to hardware except for specific functional exceptions. Compliance with the Buy American Act, the Berry Amendment, and DLA packaging requirements (MIL-STD-2073-1E and MIL-STD-129) is mandatory. Additionally, the contractor must manage hazardous materials according to the Hazard Communication Standard and utilize the Wide Area WorkFlow (WAWF) system for all electronic invoicing and receiving reports. Quotations for used, reconditioned, or remanufactured items are strictly ineligible.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE7L-26-T-980C
This solicitation from the Department of Defense Land Supply Chain is for the procurement of one flat spring, identified by NSN 5360-01-648-4859. The contract requires delivery within five days after receipt of order and is associated with purchase request 7015089477. Performance is designated for Fort Stewart, Georgia, under NAICS code 332613. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards and specific guidelines for the removal of government identification from non-accepted supplies. Notably, the contract is subject to strict export controls under ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed Department of Defense export-controlled technical data training.
Spring Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332999
New
DIBBS
O-Ring Supply (NSN 5331015806532)This subcontract issued by the Department of Defense Land Supply Chain involves the procurement of 18 units of O-rings under NSN 5331015806532. The items must strictly adhere to military specifications, with specific requirements for packaging according to MIL-STD-2073-1E and marking in accordance with MIL-STD-129. The contract is categorized under NAICS code 332999 and specifies New Cumberland as the place of performance. The solicitation was posted on August 28, 2026, with a response deadline set for September 1, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
DIBBS
Freight and Transportation Logistics (FOB Origin)
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 541611
New
DIBBS
Domestic Material and Regulatory Compliance Support
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Hazardous Materials Compliance
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 3 days
View Details