Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Material Management and Disposal

Active

International

Response Deadline11/17/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Hazardous Material Management and Disposal supports prime contractors on Department of National Defence projects in Ottawa. The scope of work involves the safe removal and disposal of hazardous materials, strictly adhering to environmental management standards, Occupational Health and Safety regulations, and specific operational requirements outlined in sections 3.5, 9.1, and 9.2. The service provider is required to utilize certified disposal vehicles and specialized containment equipment to ensure safety and compliance. A critical deliverable of the contract is the provision of official disposal certificates. The opportunity is listed under NAICS code 562910 with a response deadline of November 17, 2026.

General Info

Hazardous material disposal subcontract for DND projects in Ottawa; deadline November 17, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

Ottawa, CAN

Set-Aside

NONE

Documents

This scope was carved out of W8472-265970/A.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Radar Signal Stimulator

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 1

subcontract

Response DeadlineNov 17

Submission deadline

Response Deadline

11/17/2026, 07:00:00 PM UTCin 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs safe removal and disposal of hazardous materials for prime contractors on Department of National Defence projects. Executes environmental management and hazmat handling per Sections 9.1 and 9.2, and disposal requirements per Section 3.5. Uses hazmat containment equipment and certified disposal vehicles. Adheres to Environmental Management standards and Occupational Health and Safety regulations. Delivers disposal certificates.

Similar Contracts

Same NAICS industry code

Construction of Monitoring Well AR-MW-04 for IEUA at 1158 Reservoir Site Rancho Cucamonga, CA. Project NO. EN25022.05

Solicitation # construction-monitoring-well-ar-mw-04-ieua-1158-reservoir-site-rancho-cucamonga-ca-project-no

Yellow Jacket Drilling Services, LLC is seeking subcontractors for the construction of Monitoring Well AR-MW-04 for IEUA at the 1158 Reservoir Site in Rancho Cucamonga, California. This solicitation, identified as Project NO. EN25022.05, requires specialized services including cement pumping, waste disposal, sound wall installation, traffic control, geophysical logging, land surveying, and conductor casing installation. Interested parties must submit their responses by September 17, 2026. The project falls under NAICS code 562910 and is open to Disadvantaged Business Enterprises. Primary inquiries and coordination should be directed to Dean Coblish via email or phone.

Yellow Jacket Drilling Services, LLC

POSTED

about 7 hours ago

DEADLINE

WOJC - Asbestos Abatement (Food Service and Wellness Department)

Solicitation # WOJC – Asbestos Abatement (Food Service and Wellness Department)

Education & Training Resources is seeking a licensed asbestos abatement contractor for a subcontracting opportunity at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work involves the removal and disposal of asbestos-containing materials at two locations: the Food Service Building mop room area and the Administration Building Wellness Department, which includes approximately 10 linear feet of heat pipe insulation in the hallway ceiling. The contractor is responsible for all labor, materials, and equipment, ensuring strict compliance with EPA, OSHA, and state regulations. Key deliverables include safe containment, HEPA vacuuming, and disposal at a licensed facility, supported by daily logs, air monitoring data, and waste manifests. A one-year equipment and workmanship warranty and a signed punch list are required for project closeout and payment. Bids must be submitted by September 11, 2026, and will be evaluated based on best overall value rather than the lowest price. Required submission documents include a completed bid sheet with a detailed cost breakdown, Massachusetts licensing and credentials, a proposed service schedule, certificates of insurance, and a signed vendor acknowledgement form. Eligible bidders must possess an active SAM.gov registration and a Unique Entity ID. The contract incorporates several FAR clauses, including the Service Contract Act, Davis-Bacon Act, and Anti-Lobbying Certification. Depending on the final project value, bonding requirements range from a 100% payment bond for projects over 35,000 dollars to both performance and payment bonds for projects exceeding 150,000 dollars.

Westover Job Corps Center

POSTED

about 7 hours ago

DEADLINE

2026-Maui-Building 11 Full Damage Assessment

Solicitation # 2026-Maui-Building 11 Full Damage Assessment

Management and Training Corporation is seeking bids for a subcontracting opportunity to provide professional Architect and Engineer services for a comprehensive post-incident damage assessment of the Moloka'i Dining Hall Building 11 at the Hawaii Job Corps Center Maui. The assessment is required following wind and water damage caused by Hurricane Lala on August 15, 2026. The selected contractor must evaluate all building systems and components, determine the extent of damage using standards such as FEMA P-758 or ATC-20, and assess the feasibility of re-occupying the culinary arts classroom and kitchen. The primary deliverable is a stamped and signed Facility Damage Assessment Report, including an executive summary, detailed repair recommendations, short-term life safety concerns, and a construction cost estimate, all due within 22 calendar days of the award. This is a small business set-aside opportunity applicable to various categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB, with primary NAICS code 562910. Bids must be submitted by September 11, 2026, and include a bid sheet, W-9, self-certification form, and acceptance of terms and conditions. Award will be based on best value as determined by MTC. The contract requires compliance with Service Contract Labor Standards under Wage Determination 2015-5739 (Rev 20) and mandates strict adherence to government and Department of Labor guidance regarding the protection of sensitive and non-public information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Management & Training Corporation

POSTED

about 7 hours ago

DEADLINE

Booster Station 525 Lead Abatement

Solicitation # booster-station-525-lead-abatement

Patuxent River Utility Services, LLC is seeking a contractor for the Booster Station 525 Lead Abatement project in Maryland. The selected contractor must demonstrate proven experience in lead abatement and employ a licensed Industrial Hygienist qualified to perform environmental remediation according to the specific scope of work. This solicitation is open to various small business set-asides, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. Interested parties must submit their responses by September 10, 2026. The project falls under NAICS code 562910, and inquiries should be directed to Tomeika McClean.

Patuxent River Utility Services, LLC

POSTED

about 7 hours ago

DEADLINE

Licensed Asbestos Abatement ServicesThis subcontract for Licensed Asbestos Abatement Services supports the City of Syracuse Neighborhood and Business Development projects. The selected provider will perform asbestos surveys and the removal of asbestos-containing materials for prime contractors, ensuring all abatement activities comply with NYSDOL Code Rule 56. Additionally, the contractor is responsible for preparing variance petitions for unsafe structures and delivering the required Asbestos Abatement Certificates or NYSDOL Variance Applications. To qualify, providers must hold a Licensed New York State Asbestos Contractor certification and utilize certified laboratories. The opportunity is categorized under NAICS code 562910, with a response deadline of October 1, 2026.

Neighborhood and Business Development

POSTED

about 21 hours ago

DEADLINE

Demolition and AbatementThis subcontract opportunity with Hensel Phelps involves providing demolition and hazardous material abatement services for projects at the Seattle-Tacoma International Airport. The selected contractor will be responsible for removing existing structures and abating contaminated materials in accordance with Subsystem 2.01 to ensure the site is cleared and ready for new construction or retrofitting. The contract is designated as an 8A set-aside for Small Disadvantaged Businesses under NAICS code 562910. Interested parties must submit their responses by September 15, 2026.

POSTED

DEADLINE

Asbestos AbatementThis subcontract opportunity with Kiewit Infrastructure West Co. involves hazardous material removal and asbestos abatement for the Pier B On-Dock Rail Support Facility project, supporting the FHWA and MARAD. The selected contractor will be responsible for site preparation to ensure the delivery of a certified asbestos-free site and materials. Eligible bidders must hold a valid California Contractor's License and current hazardous materials certification. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Responses are due by September 15, 2026.

Kiewit Infrastructure West Co.

POSTED

DEADLINE

Asbestos Pipe Insulation Removal (Bldg. 5906)This subcontract for the Westover Job Corps Center involves the removal and legal disposal of asbestos-containing materials from Building 5906. The scope of work specifically requires the abatement of approximately 4 linear feet of asbestos-containing pipe insulation from the Ceiling Unit Heater located in the Mop Room. To ensure safety and compliance, the contractor must utilize HEPA vacuums, negative air machines, and containment barriers, providing certified removal and documented legal disposal. The project is designated as a small business set-aside, open to various categories including SDB, WOSB, HUBZone, VOSB, and SDVOSB firms under NAICS code 562910. Qualified contractors must hold the necessary asbestos abatement licensure and maintain full compliance with OSHA hazardous material standards. The response deadline for this opportunity is September 11, 2026.

Westover Job Corps Center

POSTED

DEADLINE

HAZMAT AbatementThis subcontract opportunity with the San Diego Unified School District involves providing unforeseen hazardous materials abatement services for prime contractors working on school district facility projects. The selected provider will be responsible for the certified removal and disposal of hazardous materials encountered during construction, ensuring that work areas are cleared and supported by official abatement reports. The project is located in San Diego, California, under NAICS code 562910. Interested parties must submit their responses by the deadline of October 1, 2026.

SAN DIEGO UNIFIED SCHOOL DISTRICT

POSTED

DEADLINE

Hazard Tree Removal and Processing

County of Tehama

POSTED

DEADLINE

2024 Park Fire: Disaster Debris & Hazard Tree Removal Services

Solicitation # 081-030-008

The County of Tehama in California is seeking solicitation for the 2024 Park Fire: Disaster Debris and Hazard Tree Removal Services. This project, identified by solicitation number 20260903045, falls under NAICS code 562910 and will be performed in Mariposa, California. The response deadline for this opportunity is September 8, 2026. Interested parties should contact Tia Branton at tbranton@tehama.gov or 530-527-8020 for further information regarding the bidding process.

County of Tehama

POSTED

DEADLINE

*RE-ADVERTISED* IFB No. 131760 Underground Storage Tank Monitoring & Testing, Multiple Locations

Solicitation # 131760

This re-advertised Invitation for Bid, IFB No. 131760, seeks a contractor to provide all necessary materials, labor, and equipment for the monitoring and testing of underground storage tanks at four California installations: Camp Roberts, Long Beach CSMS, Barstow FMS 2, and Stockton AASF. The primary objective is to ensure reliable fuel storage and operational fueling capabilities across these sites. To be eligible, the prime contractor must hold a type HAZ Hazardous Substance Removal Certification license. Interested parties must submit their bids via email to PWC@cmd.ca.gov by 12:00 PM on September 21, 2026, ensuring the subject line includes the IFB number and business name. While worksite visits are not mandatory, they are available upon request through the designated points of contact for each location. All inquiries must be directed to Jordan Bernal by 5:00 PM on September 14, 2026, and the formal bid opening will take place at 2:15 PM on September 21, 2026.

California Military Department

POSTED

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Installation of Vertical Milling Machines

All Other Specialty Trade Contractors

POSTED

DEADLINE

Supply of First LC-205VSD Vertical Milling Machines

Machine Tool (Metal Cutting Types) Manufacturing

POSTED

DEADLINE

Chemical Agent Water Testing Kit SupplyThis subcontract involves the supply of specialized water testing kits designed for the detection of chemical agents to support prime contractors on Department of National Defence projects in British Columbia and Nova Scotia. The scope of work includes providing comprehensive kits consisting of reagents, analysis tools, and instrumentation, while managing critical shelf-life requirements and ensuring all hazardous material packaging and labeling meet strict transport standards. The supplier must maintain registration with the Controlled Goods Program and adhere to all hazardous material transport regulations. Deliveries are to be completed on an FCA basis. Interested parties must submit their responses by October 13, 2026, in accordance with the solicitation requirements for the Government of Canada.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

in about 1 month

Specialized Mechanical Component Supply (Hand Ball Jack Screws)This subcontract involves the supply of specialized mechanical lifting and positioning hardware, specifically precision hand ball jack screws, for prime contractors working on Department of National Defence projects in Canada. The supplier is responsible for fabricating or sourcing components verified against specific NSN or part numbers and must provide comprehensive quality documentation for First Level Systems essential to submarine safety. To be eligible, the provider must maintain Controlled Goods Program registration and issue a Certificate of Conformity according to CFTO C-23-VIC-000/AM-001. Hardware is to be delivered conforming to FCA terms, with performance locations situated in British Columbia and Nova Scotia. The response deadline for this opportunity is October 13, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

in about 1 month

Precision Fastener Supply for Victoria-Class SubmarinesThis subcontract involves the supply of specialized high-strength precision fasteners, specifically machine screws and socket head cap screws, for prime contractors working on Department of National Defence projects for Victoria-Class Submarines. The supplier is responsible for manufacturing or sourcing components according to exact part numbers and drawings, ensuring all items are packaged per Specification D-LM-008-036/SF-000 and delivered FCA. To qualify, the provider must maintain Controlled Goods Program registration and provide a Certificate of Conformity in accordance with CFTO C-23-VIC-000/AM-001. Performance of the contract will take place in British Columbia and Nova Scotia, with a response deadline of October 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

in about 1 month

Supply of Insulated Electrical Lead Wires (AWG22)

Residential Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

Supply of Extruded Aluminum Cup Bodies

Aluminum Extruded Product Manufacturing

POSTED

DEADLINE

Manufacturing of Practice Inert Electric M6 Blasting Caps

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Practice Inert Electric M6 Blasting Cap

Solicitation # W8703-270039/A

The Department of National Defence for the Government of Canada is soliciting offers for the procurement of 10,000 Practice Inert Electric M6 Blasting Caps under solicitation number W8703-270039/A. These items are designed to replicate the size, shape, and handling characteristics of real detonators without containing explosive components, allowing soldiers to develop training techniques and confidence safely. The requirement is split into two delivery locations: 3,500 units to CFAD Dundurn, Saskatchewan, and 6,500 units to CFAD Angus, Ontario, with all deliveries due on or before November 15, 2027. The goods must be manufactured in accordance with MIL-PRF-32293 (AR) and MIL-C-46915 (MU) standards, featuring an extruded aluminum cup body and AWG22 brown insulated lead wires. The contract will be awarded to the compliant offer with the lowest evaluated price, with evaluations conducted in Canadian dollars on a Delivery Duty Paid (DDP) basis. Bidders must meet mandatory technical criteria and certify that the products are asbestos-free and contain no ferric iron dioxide. The procurement is subject to the Controlled Goods Program and requires compliance with ISO 9001:2015 quality management standards. Packaging must adhere to specific bundling and labeling requirements, including compliance with the Transportation of Dangerous Goods Act and the Hazardous Products Act. Proposals must be submitted via email to the contracting authority by September 3, 2026, at 14:00 Eastern Time, divided into technical, financial, and declaration sections.

Ammunition (except Small Arms) Manufacturing

POSTED

DEADLINE

2027 Military Careers Fair

Solicitation # W0202-27-008-A

The Department of National Defence is soliciting bids under solicitation number W0202-27-008-A to provide specialized exhibition services for the 2027 Military Careers Fair in Quebec City. The contract involves the planning, setup, and support of an indoor event scheduled for March 26 and 27, 2027, with setup occurring on March 25 and teardown beginning after public closure on March 27. The required venue must offer between 45,000 and 50,000 square feet of exhibition space. Key deliverables include hall rentals, immersive LED arches, audiovisual services, a minimum of 50 staff parking spaces, and 24/7 building security. Logistics requirements include the provision of at least one forklift with an operator during setup and teardown. The contract will be awarded to the compliant offer with the lowest evaluated price, provided it meets all mandatory technical criteria. Bidders must submit their proposals in Canadian dollars and include the required Offer Submission and Offeror Declaration forms. All services, technical documentation, and coordination must be available in French, and all equipment must comply with provincial and municipal codes as well as venue accessibility standards. The contractor is responsible for maintaining valid insurance for the building and visitors and must adhere to strict legal standards regarding the prohibition of forced labour and human trafficking. Proposals are due by September 18, 2026, and should be submitted via email to the National Defense Bid Receiving Unit.

Convention and Trade Show Organizers

POSTED

DEADLINE

Multiple Victoria-Class Spares : SCREW, MACHINE, BALL, JACK,SCREW,HAND, SCREW,CAP, SOCKET HEAD and WATER TESTING KIT,CHEMICAL AGENTS

Solicitation # W8482-275379/A

The Department of National Defence is soliciting bids for various Victoria-Class spares to be delivered to CFB Esquimalt and CFB Halifax. The required items include machine screws, balls, a hand screw jack, socket head cap screws, and chemical agent water testing kits. Quantities vary by item and destination, with specific part numbers and NCAGE codes provided for each requirement. This procurement is subject to the Controlled Goods Program under the Defence Production Act and Canada's Export Control List. Bidders offering equivalent or substitute products must provide the brand name, model or part number, and the NCAGE. The solicitation is open for responses until October 13, 2026, and documents may be submitted in either official language of Canada.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

in about 1 month

ENCLOSED TRAILER FOR OVER SNOW VEHICLE

Solicitation # W8476-277194/A

The Department of National Defence is soliciting offers for the procurement of four enclosed trailers for over snow vehicles to be delivered to Canadian Forces Base North Bay, Ontario. The contract requires delivery within 120 days of the award, with shipping terms specified as Delivered Duty Paid (DDP) according to Incoterms 2020. The trailers must adhere to SAE J560 and CMVSS standards for lighting, reflectors, and brake system compatibility. Additionally, the successful contractor must provide bilingual operator, maintenance, and parts manuals and ensure all vehicles are of the same make and model with interchangeable parts. The award will be based on the lowest aggregate evaluated price among offers that meet all mandatory technical criteria. Bids must be submitted in Canadian dollars via email by September 8, 2026. The contractor is expected to follow environmentally preferable packaging guidelines and comply with the Transportation of Dangerous Goods Act and the Hazardous Products Act for any hazardous materials. Payment terms include a 30-day window for undisputed invoices, subject to a 10% holdback. Offerors must possess a Procurement Business Number and submit their proposals in four distinct sections: technical, financial, submission/declaration forms, and additional information.

Travel Trailer and Camper Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS