Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Material Packaging and Labeling Compliance

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires strict adherence to MIL-STD-129 standards for the packaging, marking, and labeling of transformers to ensure compliance with Department of Defense specifications for safe storage and transportation. All items must be properly labeled to meet hazardous material requirements, ensuring that risks associated with transport and handling are clearly identified and mitigated in accordance with DoD protocols. Work must be performed to guarantee that every transformer shipment is fully compliant with federal military logistics standards, including accurate identification codes, barcoding, and hazard notifications. This subcontract is issued under the NAICS code 541690 and is tied to a performance location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, at 5:00 PM. The contracting entity is the Aviation Supply Chain under the Department of Defense, emphasizing the critical nature of logistics readiness and regulatory compliance within military aviation operations. Failure to meet labeling or packaging requirements will result in rejection of deliveries and potential contract noncompliance.

General Info

Pack transformers per MIL-STD-129 with hazard labels for DoD compliance, deliver to New Cumberland, PA by August 3, 2026.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure transformers meet MIL-STD-129 and hazardous material labeling requirements for safe storage and transport under DoD standards.

Similar Contracts

Same NAICS industry code

Safety and Compliance ManagementLoudoun Water is seeking a subcontractor to provide a dedicated Safety Manager responsible for enforcing compliance with OSHA regulations, site-specific safety plans, and all project-related safety requirements. The position requires continuous oversight to maintain a safe working environment across all project activities, ensuring adherence to established safety protocols and regulatory standards. The contract is classified under NAICS code 541690 and is posted as a subcontract opportunity with a response deadline of September 4, 2026. The work will be performed in Virginia, though specific location details are not provided. Interested parties must submit proposals through the designated online portal prior to the deadline.

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Role of Glucagon-like Peptide-1 (GLP-1) receptor agonists versus DPP-4 inhibitors for alcohol and substance use disorders in improving HIV-related outcomes and providing health benefits in people living with HIVThis contract solicits commercial services through a combined synopsis/solicitation under solicitation number 75N95026R0007 issued by the National Institute on Drug Abuse within the National Institutes of Health, Department of Health and Human Services. The requirement is for a firm fixed-price contract to conduct a pharmacoepidemiological study using Veterans Affairs electronic health record data to evaluate the impact of GLP-1 receptor agonists on HIV-related outcomes and alcohol and substance use disorders in adults living with HIV. The study will employ propensity-score matching and multivariable linear regression analysis to assess changes in health outcomes before and after exposure to these medications, with deliverables including aggregate-level findings, support for conference abstracts, and peer-reviewed publications led by NIDA and its collaborators. Performance is expected to occur in Bethesda, Maryland, with a base period running from August 7, 2026, to August 6, 2027, and three optional one-year extension periods through August 6, 2030. The NAICS code is 541690, with a small business size standard of $19.0 million in average annual receipts, and the acquisition is full and open with no set-aside restrictions. The solicitation requires comprehensive offer submissions including detailed technical capability demonstrations and fully loaded pricing for labor categories, hours, other direct costs, and total amounts, along with mandatory representations including UEI, TIN, and active SAM registration. Evaluation will be based on technical capability, past performance, and price, with non-price factors significantly more important than price, indicating a trade-off selection process rather than lowest price technically acceptable. Several FAR clauses are incorporated by reference, including those related to labor standards, equal opportunity, subcontracting, whistleblower rights, cybersecurity, and prohibition of confidentiality agreements that restrict reporting misconduct. Clause 52.222-49 is included in full text due to an unknown place of performance at the time of solicitation, requiring wage determinations to be retroactively applied if needed without price adjustment. Restrictions on data handling are strict: only de-identified, aggregate data may be shared outside VA systems, with no personally identifiable information permitted to leave secure VA servers. Proposals must be submitted electronically by 9:00 a.m. EST on July 30, 2026, to Robin.Knightly@nih.gov, and the contracting officer retains authority to award without further negotiation upon timely acceptance of the best

National Institutes Of Health Nida

POSTED

about 12 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract requires the preparation and submission of hazard warning labels and safety data sheets for hazardous materials used in cable production, ensuring full compliance with OSHA and Department of Defense standards. All documentation must be accurately formatted and scientifically valid to meet federal regulatory requirements for workplace safety and hazardous material handling. The work is under a subcontract and is performance-based, with the place of performance located at Barstow, California, ZIP 92311-5015. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, under the NAICS code 541690 for other professional, scientific, and technical services. The contracting entity is the ASC Commodities Division within the Department of Defense, and all deliverables must align with DOD’s specific protocols for hazard communication and material safety management.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingAll hazardous materials must be labeled in strict accordance with OSHA’s 29 CFR 1910.1200 and the DFARS clause 252.223-7001 to ensure proper identification and handling of chemical hazards. Suppliers are required to submit hazard labels to the contracting officer if the materials are not already listed in the official inventory, ensuring full transparency and regulatory compliance. This subcontract, issued by the Department of Defense’s Fluid Handling Division under NAICS code 541690, is open for response until August 6, 2026, with performance expected to align with federal safety standards for chemical labeling across all work locations. Failure to comply with labeling requirements or to submit unlisted hazard information may result in contractual noncompliance penalties.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazard Communication Compliance & LabelingThe contract seeks specialized services for the preparation of hazard warning labels and Material Safety Data Sheets (MSDS/SDS) for hazardous materials, ensuring full compliance with OSHA 29 CFR 1910.1200 and MIL-STD-129 marking standards. This work is critical for maintaining regulatory adherence in handling, storing, and transporting dangerous substances, with precise formatting, language, and visual elements required to meet both federal safety and military specification requirements. The deliverables must be accurate, consistently formatted, and capable of being integrated into existing logistics and inventory systems used by the Department of Defense. The contract is classified as a subcontract under NAICS code 541690 for other scientific and technical consulting services, and it is being managed by the Fluid Handling Division within the Department of Defense. Performance is required to be conducted at Tracy, California, with a ZIP code of 95304-5000, and proposals must be submitted by the deadline of August 6, 2026. This opportunity is open to qualified subcontractors meeting the technical and compliance criteria, though no set-aside criteria have been specified. Interested parties can access the full solicitation through the DIBBS system using the provided link.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract under the title Hazardous Materials Compliance & Labeling Services seeks a subcontractor to provide regulatory compliance services focused on the development and government submission of hazard warning labels and Material Safety Data Sheets for chemical shipments. The work is tied to the Department of Defense’s Medical Supply Chain MD Surg FSF and requires adherence to federal and international standards governing the safe transport and handling of hazardous materials. The deliverables must ensure accurate, compliant documentation that meets mandated regulatory frameworks, supporting the secure logistics of chemical products within military medical supply channels. Performance of this contract is designated for APO, 09227-0000, indicating operations linked to overseas or military post locations with specific logistical and regulatory demands. The solicitation was posted on July 26, 2026, with proposals due by August 3, 2026, under a subcontract structure classified under NAICS code 541690, which covers other scientific and technical consulting services. The contracting entity is part of a broader defense supply infrastructure, requiring the successful bidder to demonstrate expertise in hazardous materials compliance, regulatory submission processes, and the ability to support mission-critical medical supply operations with precision and timeliness.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Hazard Communication and Safety Labeling ComplianceThe contract requires strict adherence to hazardous materials labeling standards under OSHA 29 CFR 1910.1200 and DFARS 252.223-7001, ensuring all chemical containers and associated documentation are accurately marked to comply with federal safety regulations. This includes the timely submission of Material Safety Data Sheets and verification of any applicable exemptions under FIFRA, FDCA, or CPSA to confirm legal handling and storage protocols. The work must be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is classified as a subcontract under NAICS code 541690, indicating it involves other scientific and technical consulting services. Proposals must be submitted by the deadline of August 6, 2026, and the solicitation is managed by the Department of Defense through its Maritime Supply Chain division, indicating this is part of a broader defense logistics or supply chain operation requiring high-level compliance and documentation rigor.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Technical Documentation and Traceability ServicesThe contract requires the preparation and secure submission of DLA Form 918 along with all associated test documentation to ensure complete traceability of components throughout the supply chain, emphasizing accuracy, compliance, and accountability at every stage. This work is critical to maintaining the integrity of defense logistics and ensuring that all parts meet stringent military standards for identification, testing, and documentation. The task is part of a subcontract under the NAICS code 541690, issued by the Active Devices Division of the Department of Defense, with performance centered in Columbus, Ohio, ZIP 43213. Responses must be submitted by August 6, 2026, following the solicitation posted on July 26, 2026, and must align with federal traceability protocols to support defense system reliability and audit readiness. The nature of the work demands strict adherence to documented procedures and secure handling of sensitive technical data.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Regulatory and Compliance Documentation SupportThe contract requires the preparation and submission of comprehensive regulatory documentation including hazard warning labels, safety data sheets, and compliance certifications that meet stringent OSHA, DFARS, and military standards. This work must be completed both prior to contract award and throughout performance to ensure ongoing adherence to federal and defense-specific safety and compliance requirements. The deliverables are critical for enabling the procurement and handling of materials within defense supply chains where regulatory accuracy directly impacts operational readiness and safety. This subcontract is issued under the NAICS code 541690 and is managed by the ASC Commodities Division under the Department of Defense. The place of performance is FPO with a ZIP code of 09587, indicating operations may involve overseas or expeditionary logistics. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, leaving a short window for qualified vendors to submit proposals. While no set-aside type is specified, the contract is part of a larger defense acquisition framework, demanding strict timelines, regulatory precision, and the ability to support military logistics under high-stakes conditions.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Documentation and LabelingThe contract requires the preparation and accurate submission of Safety Data Sheets and hazard labels for all hazardous materials utilized in production processes, ensuring full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001. This work is critical to maintaining regulatory adherence and operational safety across the defense supply chain, with deliverables must meet federal mandates for hazard communication, chemical classification, and labeling consistency. The submission must be finalized and delivered by the response deadline of August 3, 2026, and the effort is structured as a subcontract under NAICS code 541690, managed by the Department of Defense’s Aviation Supply Chain ESOC Buys office. All documentation must be technically precise, legally defensible, and aligned with current federal standards for hazardous material handling and dissemination.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract entails the identification, documentation, and labeling of hazardous materials associated with motors, ensuring full compliance with Department of Defense and OSHA standards. This includes the preparation of Safety Data Sheets and proper labeling protocols to meet regulatory requirements for handling, storage, and transportation of hazardous substances. Work must be performed in accordance with established federal safety guidelines, with emphasis on accuracy, consistency, and documentation integrity to support supply chain safety and operational readiness. This is a small business set-aside subcontract under NAICS code 541690, with performance located at FPO 09587, and is open exclusively to small businesses as defined by the SBA. The solicitation was posted on July 26, 2026, with proposals due by August 6, 2026. The contracting activity falls under the Maritime Supply Chain division of the Department of Defense, and all work must comply with applicable federal regulations governing hazardous material management. While no point of contact is listed, all responses must be submitted through the designated DIBBS portal.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance and SDS PreparationThe contract requires identification of all hazardous components within air breathing hoses and the preparation of Safety Data Sheets that fully comply with OSHA’s 29 CFR 1910.1200 and Federal Standard No. 313, with all documentation to be completed and submitted before the contract award is finalized. This effort is focused on ensuring regulatory adherence for chemical safety and hazard communication, targeting the specific materials used in respiratory equipment. The work must be performed with precision to meet federal standards, and the deliverables are critical for the award process, making timely and accurate compliance non-negotiable. The solicitation is issued under the NAICS code 541690, indicating a professional, scientific, and technical services context, and is classified as a subcontract within the Department of Defense’s Fluid Handling Division. The place of performance is designated as San Diego, California, with a response deadline of August 6, 2026, and the posting date is July 26, 2026, leaving a narrow window of approximately two weeks for submission. There is no set-aside designation provided, meaning the opportunity is open to all eligible vendors without preference based on business size or category. The contractual obligations demand technical expertise in hazardous material analysis and SDS formatting, with no room for deviation from the mandated federal requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

CMMC Level 2 Cybersecurity Compliance SupportThe contract seeks implementation and documentation of cybersecurity controls to achieve Compliance with Cybersecurity Maturity Model Certification Level 2 and Defense Federal Acquisition Regulation Supplement requirements for protecting covered defense information. The work involves establishing, validating, and maintaining technical and administrative safeguards aligned with NIST SP 800-171 to ensure secure handling of sensitive military data. Performance is required at Tinker Air Force Base with a 73145-9031 ZIP code, and the effort is structured as a subcontract under the NAICS code 541512 for computer systems design services. The solicitation was posted on July 26, 2026, with proposals due by August 3, 2026, and the overseeing agency is the Department of Defense through the Aviation Supply Chain organization. All deliverables must fully meet CMMC Level 2 standards and demonstrate robust documentation of policies, procedures, and control implementations to satisfy audit and assessment readiness.

Computer Systems Design Services

POSTED

DEADLINE

Domestic and Ocean Transportation LogisticsThe contract requires comprehensive logistics coordination for FOB Origin delivery, with potential involvement of ocean transport under strict compliance with U.S.-flag vessel regulations and mandatory reporting to MARAD. This subcontract, issued under the NAICS code 488410 for other support activities for water transportation, supports the Department of Defense’s Aviation Supply Chain and is performance-based at Tinker AFB with ZIP code 73145-9031. The solicitation opened on July 26, 2026, and responses are due by August 3, 2026, emphasizing timely submission for consideration. All transport activities must align with federal maritime requirements, particularly regarding vessel flagging and reporting obligations, ensuring adherence to national security and regulatory standards throughout the supply chain.

Motor Vehicle Towing

POSTED

DEADLINE

Hazardous Materials Handling and SDS ComplianceThe contract requires precise identification, labeling, and documentation of all hazardous materials included in the kit, ensuring full compliance with military and defense acquisition standards. This includes the timely submission of Safety Data Sheets (SDS) and strict adherence to MIL-STD-129 for packaging and labeling requirements, as well as compliance with DFARS regulations governing defense-related procurement. All work must be performed with accuracy and diligence to meet the Department of Defense’s stringent safety and logistical protocols. Performance is designated to take place at Tinker Air Force Base, Oklahoma, with a response deadline of August 3, 2026. The contract falls under the NAICS code 541690 for other scientific and technical consulting services and is classified as a subcontract. The agency responsible is the Aviation Supply Chain under the Department of Defense, emphasizing the critical nature of hazardous materials handling within military aviation supply operations. Compliance is non-negotiable, and failure to meet documentation, labeling, or SDS submission standards may result in contract rejection or non-performance penalties.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract seeks independent testing and validation services for the first production unit to confirm full compliance with established technical specifications, requiring a formal First Article Inspection (FAI) report adhering to MIL-STD-1916 and ASQ H1331 standards. This effort ensures that all manufacturing processes, materials, and functional attributes meet defined quality and performance criteria before full-scale production proceeds. The work is critical to validating readiness for integration into defense systems and must be conducted by a qualified third party with demonstrated expertise in military-grade verification protocols. The solicitation is classified as a subcontract under NAICS code 541380 and is issued by the Department of Defense through its Aviation Supply Chain office. Performance is required at Tinker AFB, OK, with a response deadline of August 3, 2026, and the posting date of July 26, 2026. No set-aside designation is specified, leaving the opportunity open to all eligible vendors. The contract does not list a point of contact, and detailed instructions for proposal submission are available via the provided DIBBS link, where interested parties must follow official bidding procedures to qualify.

Testing Laboratories and Services

POSTED

DEADLINE

Parts Kit, Valve, CUR Assembly and DeliveryThe contract requires the custom assembly, packaging, marking, and delivery of a military parts kit designated by NSN 2915-00-703-5177, specifically for a valve CUR assembly, to Tinker AFB with a zip code of 73145-9031. All work must adhere strictly to MIL-STD-2073-1 for packaging and MIL-STD-129 for marking standards to ensure full military compliance. The task involves end-to-end handling from component assembly through final shipment, with precise documentation and labeling required for government acceptance. The delivery location is fixed and the contract is classified as a subcontract under the NAICS code 332999, indicating it is for other miscellaneous fabricated metal product manufacturing. The solicitation posted on July 26, 2026, requires responses by August 3, 2026, and is managed by the Department of Defense through its Aviation Supply Chain organization.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supplier of Raw Materials for Aerospace FastenersThe contract seeks qualified suppliers to provide high-strength alloy steel or corrosion-resistant materials such as A286, Inconel, or titanium for the manufacture of close tolerance bolts meeting the NAS6603–NAS6620 Rev 11 specifications. These materials must meet stringent aerospace industry standards for performance, consistency, and traceability, ensuring suitability for critical applications in defense and aviation systems. The materials are intended for use in fastener production where dimensional precision and environmental resistance are paramount, and suppliers must demonstrate capability to deliver certified material with full documentation of composition, heat treatment, and mechanical properties. This is a total small business set-aside under the SBA program, exclusively open to small business concerns as defined by the NAICS code 331110, which covers iron and steel mills and ferroalloy manufacturing. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and the place of performance is designated as Hill AFB, Utah, with a zip code of 84056-5734. While the contracting agency is listed as Aviation Supply Chain under the Department of Defense, the actual delivery and fulfillment will align with defense logistics requirements centered at this location. Suppliers are expected to comply with all applicable federal acquisition regulations and provide material that meets exacting quality and certification standards required for military aerospace fastener systems.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Quality Assurance & Inspection Services (MIL-STD-1916)This contract specifies the provision of independent quality inspection and statistical sampling services in accordance with MIL-STD-1916, encompassing first article testing and final acceptance sampling to ensure compliance with military quality standards. The work is required to support the Department of Defense’s Aviation Supply Chain, with performance location at Hill AFB, Utah, and all inspection activities must meet rigorous defense quality benchmarks through statistically valid sampling methods. Only small businesses are eligible to bid, as this is a total small business set-aside under SBA regulations, and the North American Industry Classification System code 541330 applies to engineering services related to quality assurance. Responses are due by August 3, 2026, and the opportunity is posted under the DIBBS platform for subcontractors seeking to support defense procurement.

Engineering Services

POSTED

DEADLINE

Military-Compliant Packaging, Labeling, and PalletizationThe contract requires the packaging, labeling, and palletization of bolt shipments in strict compliance with MIL-STD-129 and RP001 palletization standards for deliveries to DLA depots. All work must adhere to U.S. military specifications for traceability, labeling accuracy, and secure handling to ensure seamless integration into defense logistics systems. The place of performance is designated as Hill AFB with a zip code of 84056-5734, and the work falls under NAICS code 493190, indicating specialized warehousing and storage services tied to military supply chains. This is a total small business set-aside under SBA guidelines, meaning only small businesses certified by the Small Business Administration are eligible to bid. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and it is classified as a subcontract opportunity linked to the Department of Defense’s Aviation Supply Chain division. Interested parties must respond via the DIBBS platform using the provided RFQ link to be considered for award.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThis contract requires the preparation, submission, and ongoing management of Safety Data Sheets for hazardous materials used in production or packaging, ensuring full compliance with OSHA’s Hazard Communication Standard. The work involves maintaining accurate, up-to-date SDS documentation to meet regulatory requirements, including updates triggered by chemical changes, new regulations, or re-evaluations of material hazards. The contractor must have the expertise to navigate federal safety standards, coordinate with internal teams for material data collection, and ensure timely dissemination of SDS documents to all relevant stakeholders. The solicitation is a total small business set-aside under the SBA program, designated under NAICS code 541690, and is issued by the Department of Defense through the Aviation Supply Chain office. Performance of the work is required at Hill AFB, Utah, with a response deadline of August 3, 2026, and the posting date was July 26, 2026. Only small businesses qualifying under the SBA’s size standards may submit proposals, and all submissions must be made through the DIBBS system using the provided UI link. Failure to meet compliance requirements could result in regulatory violations and operational disruptions for defense-related production activities.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Precision Fastener Manufacturing – Close Tolerance BoltsThe contract calls for the manufacture of close tolerance bolts meeting NAS6603 to NAS6620 Rev 11 specifications, requiring stringent quality controls including thread gauging and full material traceability to ensure compliance with military standards. All work must adhere to exacting dimensional and performance requirements applicable to aerospace and defense applications, with an emphasis on defect prevention and documented conformity throughout the production process. This is a total small business set-aside under the SBA program, classified under NAICS code 332313 for screw, bolt, and nut manufacturing, and is issued by the Department of Defense through the Aviation Supply Chain office. The place of performance is designated as Hill AFB, Utah, with a response deadline of August 3, 2026, and the solicitation was posted on July 26, 2026. Subcontractors must be certified small businesses capable of fulfilling the technical and regulatory demands of DoD-mandated fastener production.

Plate Work Manufacturing

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires the performance of pre-shipment quality inspections to ensure all delivered items meet strict compliance standards under FAR 52.246-2 and achieve zero-defect acceptance at the final destination. This work is critical to maintaining the integrity of defense supply chain operations and demands rigorous adherence to established quality control protocols throughout the inspection process. The scope is focused entirely on verifying product conformity prior to shipment, with no tolerance for defects that could compromise mission readiness or safety. The contract is classified as a subcontract under NAICS code 541330, indicating it involves scientific and technical consulting services related to quality assurance. It is managed by the Aviation Supply Chain under the Department of Defense, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026. All work must be completed in alignment with federal acquisition regulations and defense-specific quality mandates, ensuring that every unit inspected is certified for seamless integration into operational systems.

Engineering Services

POSTED

DEADLINE

Transportation and Freight Logistics (FOB Origin)Freight transportation services are being solicited under a subcontract to move cargo from origin to DLA Distribution New Cumberland, Pennsylvania, with a 239-day acceptance period for receipt and compliance with FOB origin terms. Delivery must satisfy inspection requirements upon arrival, ensuring goods are received in proper condition without liability shifting to the carrier prior to final acceptance. The solicitation is issued under NAICS code 484220, reflecting its focus on freight transportation by truck. The contract opportunity is posted by the Aviation Supply Chain under the Department of Defense, with responses due by August 3, 2026. Performance is required at the specified delivery location in New Cumberland, PA, with precise compliance to FOB origin conditions dictating that title and risk transfer to the buyer at the point of origin. The timeline is strict, and all shipments must be managed to meet the 239-day acceptance window while ensuring full regulatory and logistical alignment with federal defense supply chain mandates.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE