Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Materials Compliance and Labeling Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541620
New
SLED
850.80 Stream Mitigation Credits- Webster County
Solicitation # 645-DOTRFB-3044-2027
The Iowa agency is seeking solicitations for stream mitigation credits located in Webster County under solicitation number DASIowa-645-DOTRFB-3044-2027. This opportunity was posted on August 29, 2026, and requires responses to be submitted by the deadline of September 24, 2026, at 6:00 PM. The procurement is managed by the state of Iowa as a SLED organization. Interested parties can find further details through the provided SciQuest portal and may contact Mallory Hunter as the primary point of contact for inquiries regarding this project.
Iowa

POSTED

about 20 hours ago

DEADLINE

in 25 days
NAICS: 541620
New
Federal
FCRHC Medical Gas Evaluation and Inspection Services
Solicitation # IHS1530296
The Navajo Area Indian Health Service, under the Department of Health and Human Services, is exercising an option period for contract 75H71025P01185 regarding Medical Gas Evaluation and Inspection Services. This contract, categorized under NAICS code 541620, was originally awarded with a base period and two option periods that fell below the micro-purchase and synopsizing thresholds. The performance schedule consists of a base period from October 1, 2025, to September 30, 2026, followed by a first option period ending September 30, 2027, and a second option period ending September 30, 2028. The services are performed in Teec Nos Pos, Arizona, with administrative oversight based in Window Rock, Arizona.
Navajo Area Indian Health Svc

POSTED

1 day ago

DEADLINE

in 14 days
NAICS: 541620
New
Erosion and Sediment Control (SWPPP Implementation)Norstar Plumbing and Engineering, Inc. is seeking a subcontractor for the implementation of a Stormwater Pollution Prevention Plan. The scope of work focuses on erosion and sediment control, specifically requiring the installation of silt fencing and sediment basins, as well as the execution of regular site inspections to ensure environmental compliance. This opportunity is categorized under NAICS code 541620 and is open to certified Disadvantaged Business Enterprises, Minority Business Enterprises, and Women Business Enterprises. Interested parties must submit their responses by September 18, 2026.
Norstar Plumbing and Engineering, Inc.

POSTED

1 day ago

DEADLINE

in 18 days
NAICS: 541620
New
SLED
Specialized Technical Subconsulting (Interdisciplinary Support)
UC Davis Medical Center

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Mitigation Monitoring and Program Implementation
UC Davis Medical Center

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
CEQA/NEPA Exemption and Negative Declaration Support
UC Davis Medical Center

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Noise and Transportation Impact Studies
UC Davis Medical Center

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Air Quality and Health Risk Analysis
UC Davis Medical Center

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Cultural and Historical Resources Evaluation
UC Davis Medical Center

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Biological Resources Assessment and Monitoring
UC Davis Medical Center

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Environmental Impact Report (EIR) Preparation
UC Davis Medical Center

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541620
New
SLED
Environmental Planning Consulting Services
Solicitation # 0000040219
UC Davis Health is seeking Statements of Qualifications from qualified firms to provide environmental planning consulting services for the Capital Projects team within the Facilities Planning and Development division. The selected consultants will support environmental planning functions for projects at the Sacramento Campus and other off-site locations in the greater Sacramento Region. Key responsibilities include performing environmental reviews, preparing CEQA and NEPA documents, managing mitigation monitoring, and providing strategic regulatory and editorial support. Up to two firms will be selected under a blanket professional services agreement with a total value not to exceed 3 million dollars. Interested firms must notify the university by September 29, 2026, to receive an upload link, with final submissions due by 4 p.m. on Wednesday, September 30, 2026. The scope of work encompasses various project types, including Environmental Impact Reports, tiered EIRs, exemption memos, and the implementation of project-specific construction monitoring and mitigation programs. Selected firms and their subconsultants must adhere to nondiscrimination requirements, pay prevailing wages in accordance with the California Labor Code, and comply with UC Fair Wage standards.
UC Davis Medical Center

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The contract seeks services to develop and obtain government approval for hazard warning labels compliant with OSHA and DLA standards for the shipment of filter elements. This subcontract falls under NAICS code 541620 and is issued by the Department of Defense through the Maritime Supply Chain organization, with performance required at a location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is open for responses through July 27, 2026, and is focused on ensuring all labeling meets federal regulatory requirements for hazardous materials transportation and handling. Successful bidders must demonstrate expertise in regulatory compliance, label design, and coordination with government approval authorities to support safe and lawful shipment processes.

General Info

Develop and approve OSHA-DLA compliant hazard labels for filter elements in New Cumberland, PA, by July 27, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-26-T-216A.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FILTER ELEMENT, FLUI

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Development and government approval of hazard warning labels per OSHA and DLA requirements for filter element shipment.

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-286D
This contract is for the procurement of 5,500 feet of electrical wire, identified as NSN 6145006237224, under solicitation SPE7M1-26-T-286D. The item is classified as a commercial critical application item and must be delivered to DLA Distribution Cherry Point. The delivery schedule is set for 157 days after order, with a need ship date of February 2, 2027, and an original required delivery date of April 17, 2027. The wire must be provided in continuous lengths of 500 feet per spool, and multiple unit packs are only acceptable if the specific advice code is 2P or 39. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The contract allows for a quantity variance of plus or minus 5 percent, with inspection and acceptance occurring at the destination. Technical and quality requirements are governed by the DLA Master List.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 24 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7M1-26-T-287G
This contract is for the procurement of one fluid pressure regulating valve, identified by NSN 4810017020959 and part number 30815994 from Warren Controls, Inc. The item is designated as a critical application item and must be delivered within five days. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination in Sasebo, Japan. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Environmental restrictions are in place prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required for specific systems. The original required delivery date is August 5, 2026.
Industrial Valve Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUST AN
Solicitation # SPE7M1-26-U-5262
DLA Land and Maritime is soliciting quotations for an Indefinite Delivery Contract (IDC) to procure protective dust and moisture seal caps, designated as a critical application item. The requirement involves an estimated quantity of 2,267 each, with a contract maximum value of $350,000.00. The caps must be black in color and manufactured from conductive material conforming to MIL-B-81705, Type 2. Technical compliance is required according to SAE AS85049F and SAE AS85049/138C standards. This acquisition is a total small business set-aside, and offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment. The contract specifies a delivery period of 84 days with terms set at FOB Origin, while inspection and acceptance will occur at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. For any hazardous materials, contractors must follow IP025 and the Hazard Communication Standard. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow (WAWF) system. Additionally, the solicitation incorporates various federal and defense regulations regarding cybersecurity, small business representations, and the prohibition of certain telecommunications equipment.
Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 3 days
View Details
NAICS: 339991
New
DIBBS
PAPER, GASKET
Solicitation # SPE7M1-26-U-5263
This solicitation, issued by DLA Land and Maritime under number SPE7M1-26-U-5263, is a Request for Quotations for an indefinite delivery contract to procure gasket paper. The requirement is a Total Small Business Set-Aside with an estimated contract maximum value of $350,000. The specific item, identified by NSN 5330-00-270-8467, consists of gasket paper measuring 36 inches wide, 50 yards long, and 0.010 inches thick, with a unit of issue in square yards. The estimated quantity for the initial line item is 396 square yards, though this is subject to change based on actual procurement needs. The contract includes stringent technical, quality, and packaging requirements. Products must be manufactured in accordance with current part standards, and sampling for inspection must follow MIL-STD-1916 or ASQ H1331, with specific AQL levels assigned to critical, major, and minor attributes. A strict prohibition exists against the intentional addition of mercury or mercury-containing compounds to the supplies. Due to the potential for UV degradation, the material must be packaged and sealed in medium-duty, waterproof, greaseproof, and opaque bags in compliance with MIL-DTL-117. Delivery is required within 60 days, with inspection and acceptance occurring at the destination. Offerors must also comply with the Buy American Act, the Berry Amendment, and various cybersecurity and hazardous material marking regulations.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334515
New
DIBBS
DISPLAY INDICATOR, A
Solicitation # SPE7M1-26-T-286X
This contract is for the procurement of two units of Display Indicator A, identified by NSN 6625-01-563-7918 and part number P8011Z2110000 from ASAP Semiconductor, LLC. The order is managed under purchase request 7017776454 with a required delivery date of March 23, 2027, and a delivery window of 157 days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Key technical requirements include the potential presence of batteries and a prohibition on mercury compounds in packaging. The contractor must comply with DLA master lists for quality and technical requirements, as well as specific protocols for configuration change management and the removal of government identification from non-accepted supplies.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 24 hours ago

DEADLINE

in 3 days
View Details
NAICS: 444180
New
DIBBS
AMPLIFIER, AUDIO FREQUE
Solicitation # SPE7M1-26-U-5260
Solicitation SPE7M1-26-U-5260 is an Indefinite Delivery Contract issued by the Department of Defense Maritime Supply Chain for the procurement of audio frequency amplifiers, identified by NSN 5996-00-100-4932. The contract has an estimated quantity of 1,808 units with a guaranteed minimum quantity of 271 units and a maximum contract ceiling of 350,000 dollars. Delivery is required within 278 days, with terms set as FOB Origin and inspection and acceptance occurring at the destination. The technical requirements are stringent, requiring compliance with MIL-A-23595/1A and MIL-A-23595D. All components must be sourced from Qualified Products List or Qualified Manufacturers List sources. Strict environmental and safety mandates are in place, including the prohibition of mercury and Class I ozone-depleting substances. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for electrostatic discharge and electromagnetic interference protection per MIL-PRF-81705. Quality assurance is high, with a zero-defect acceptance sampling policy. Invoicing must be processed through the Wide Area WorkFlow system.
Other Building Material Dealers

POSTED

about 24 hours ago

DEADLINE

in 3 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-286L
This contract is a solicitation for the procurement of 2,000 feet of electrical wire, identified by NSN 6145-00-578-6601. The item is designated as a critical application item and must adhere to specific technical standards, including SAE AS50861 and AS50861/2. Because this item is listed on a Qualified Products List or Qualified Manufacturers List, the applicable QPL or QML requirements must be met. The procurement is open to full and open competition. Key delivery and packaging requirements include a quantity variance of plus or minus 5 percent and a delivery timeline of 157 days after the order. Packaging and preservation must comply with MIL-DTL-12000 and MIL-STD-129, with specific palletization requirements outlined in RP001. Depending on the assigned advice code, the material must be provided in continuous lengths, as multiple unit packs may be unacceptable. The final destination for delivery is the DLA Distribution Depot at Hill AFB, Utah, with a required delivery date of February 23, 2027.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 24 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334514
New
DIBBS
MULTIMETER
Solicitation # SPE7M1-26-T-286W
This contract is a solicitation for the procurement of 43 multimeters, specifically Fluke Electronics Canada LP part number 87V/C25, under NSN 6625-01-549-4851. The agreement is managed by the Department of Defense Maritime Supply Chain and requires delivery to the DLA Distribution Depot Oklahoma at Tinker AFB. The required delivery date is October 17, 2026, with a need ship date of February 2, 2027, and a delivery window of 157 days after the order. The contract mandates strict adherence to DLA packaging, marking, and shipping requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates specific technical and quality requirements from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335929
New
DIBBS
CABLE, POWER, ELECTRICAL
Solicitation # SPE7M1-26-T-286G
This contract is for the procurement of 21,000 feet of special purpose electrical power cable, identified by NSN 6145-01-351-3314 and part number M27500-22SM2N23. The item is designated as a critical application item and must comply with NEMA WC 27500-2025 standards. Because the item is listed on a Qualified Products List or Qualified Manufacturers List, the supplier must be an approved entity. The procurement is open to full and open competition. Delivery is required within 157 days, with a need ship date of February 2, 2027, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must adhere to ASTM D3951 and MIL-STD-129, with a specific requirement for 500 feet per spool. Depending on the assigned advice code, the material must be provided in continuous lengths, as multiple unit packs may be unacceptable. The contract allows for a quantity variance of plus or minus 5 percent, with inspection and acceptance occurring at the destination.
Other Communication and Energy Wire Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 3 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Hazardous Materials ComplianceThis subcontract, managed by the Maritime Supply Chain under the Department of Defense, focuses on the final packaging of piston rods. A critical requirement of the agreement is ensuring that all hazardous materials are labeled in strict accordance with OSHA’s Hazard Communication Standard. The project is categorized under NAICS code 561910 and will be performed in Tracy, California. Interested parties must submit their responses by September 2, 2026, following the posting date of August 28, 2026.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Testing ServicesThe Department of Defense, through the Maritime Supply Chain, is seeking a subcontractor to provide quality inspection and testing services. The scope of work involves third-party dimensional inspection, hardness testing, and metallurgical analysis to ensure all components comply with specific technical and quality requirements. This opportunity is categorized under NAICS code 541380 and will be performed in Tracy, California. Interested parties must submit their responses by September 2, 2026, following the posting date of August 28, 2026.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 423510
New
DIBBS
Industrial Materials and Raw Stock SupplyThis subcontract under the Department of Defense Maritime Supply Chain involves the procurement of certified alloy steel bar stock or specialty metals essential for the manufacturing of piston rods. The supplier is required to provide full material traceability and comprehensive material test reports to ensure quality and compliance. The opportunity is categorized under NAICS code 423510 and is designated for performance in Tracy, California. Interested parties must submit their responses by September 2, 2026, following the posting date of August 28, 2026.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 3 days
View Details