Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & Labeling Services

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with OSHA Hazard Communication standards and MIL-STD-129 requirements for shipment markings. This work is essential to ensure safe handling, storage, and transportation of hazardous materials within Department of Defense logistics channels. The contractor must demonstrate expertise in accurately classifying hazardous substances, generating compliant documentation, and applying standardized labeling protocols to meet federal and military regulatory frameworks. All deliverables must be submitted by the deadline to support shipment readiness and regulatory adherence. This is a total small business set-aside under the SBA program, meaning only small business concerns are eligible to bid, and the solicitation falls under NAICS code 541690 for other scientific and technical consulting services. The place of performance is specified as Texarkana, Texas, with a zip code of 75507-5000, and the acquiring activity is the Red River Receiving Bldg under the Department of Defense. The contract was posted on July 26, 2026, with a response deadline of August 6, 2026, and is structured as a subcontract under a larger procurement effort managed through the DIBBS system.

General Info

Small business set-aside for OSHA and MIL-STD-129 compliant hazard labels and MSDS in Texarkana, Texas.

Agency

Department Of Defense → RED RIVER RECEIVING BLDGView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

TEXARKANA, TX, 75507-5000, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → RED RIVER RECEIVING BLDG

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → RED RIVER RECEIVING BLDG

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) in compliance with OSHA HAZCOM and MIL-STD-129 for shipment markings.

Similar Contracts

Same NAICS industry code

Role of Glucagon-like Peptide-1 (GLP-1) receptor agonists versus DPP-4 inhibitors for alcohol and substance use disorders in improving HIV-related outcomes and providing health benefits in people living with HIVThis contract solicits commercial services through a combined synopsis/solicitation under solicitation number 75N95026R0007 issued by the National Institute on Drug Abuse within the National Institutes of Health, Department of Health and Human Services. The requirement is for a firm fixed-price contract to conduct a pharmacoepidemiological study using Veterans Affairs electronic health record data to evaluate the impact of GLP-1 receptor agonists on HIV-related outcomes and alcohol and substance use disorders in adults living with HIV. The study will employ propensity-score matching and multivariable linear regression analysis to assess changes in health outcomes before and after exposure to these medications, with deliverables including aggregate-level findings, support for conference abstracts, and peer-reviewed publications led by NIDA and its collaborators. Performance is expected to occur in Bethesda, Maryland, with a base period running from August 7, 2026, to August 6, 2027, and three optional one-year extension periods through August 6, 2030. The NAICS code is 541690, with a small business size standard of $19.0 million in average annual receipts, and the acquisition is full and open with no set-aside restrictions. The solicitation requires comprehensive offer submissions including detailed technical capability demonstrations and fully loaded pricing for labor categories, hours, other direct costs, and total amounts, along with mandatory representations including UEI, TIN, and active SAM registration. Evaluation will be based on technical capability, past performance, and price, with non-price factors significantly more important than price, indicating a trade-off selection process rather than lowest price technically acceptable. Several FAR clauses are incorporated by reference, including those related to labor standards, equal opportunity, subcontracting, whistleblower rights, cybersecurity, and prohibition of confidentiality agreements that restrict reporting misconduct. Clause 52.222-49 is included in full text due to an unknown place of performance at the time of solicitation, requiring wage determinations to be retroactively applied if needed without price adjustment. Restrictions on data handling are strict: only de-identified, aggregate data may be shared outside VA systems, with no personally identifiable information permitted to leave secure VA servers. Proposals must be submitted electronically by 9:00 a.m. EST on July 30, 2026, to Robin.Knightly@nih.gov, and the contracting officer retains authority to award without further negotiation upon timely acceptance of the best

National Institutes Of Health Nida

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract requires the preparation and submission of hazard warning labels and safety data sheets for hazardous materials used in cable production, ensuring full compliance with OSHA and Department of Defense standards. All documentation must be accurately formatted and scientifically valid to meet federal regulatory requirements for workplace safety and hazardous material handling. The work is under a subcontract and is performance-based, with the place of performance located at Barstow, California, ZIP 92311-5015. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, under the NAICS code 541690 for other professional, scientific, and technical services. The contracting entity is the ASC Commodities Division within the Department of Defense, and all deliverables must align with DOD’s specific protocols for hazard communication and material safety management.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingAll hazardous materials must be labeled in strict accordance with OSHA’s 29 CFR 1910.1200 and the DFARS clause 252.223-7001 to ensure proper identification and handling of chemical hazards. Suppliers are required to submit hazard labels to the contracting officer if the materials are not already listed in the official inventory, ensuring full transparency and regulatory compliance. This subcontract, issued by the Department of Defense’s Fluid Handling Division under NAICS code 541690, is open for response until August 6, 2026, with performance expected to align with federal safety standards for chemical labeling across all work locations. Failure to comply with labeling requirements or to submit unlisted hazard information may result in contractual noncompliance penalties.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazard Communication and Safety Labeling ComplianceThe contract requires strict adherence to hazardous materials labeling standards under OSHA 29 CFR 1910.1200 and DFARS 252.223-7001, ensuring all chemical containers and associated documentation are accurately marked to comply with federal safety regulations. This includes the timely submission of Material Safety Data Sheets and verification of any applicable exemptions under FIFRA, FDCA, or CPSA to confirm legal handling and storage protocols. The work must be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is classified as a subcontract under NAICS code 541690, indicating it involves other scientific and technical consulting services. Proposals must be submitted by the deadline of August 6, 2026, and the solicitation is managed by the Department of Defense through its Maritime Supply Chain division, indicating this is part of a broader defense logistics or supply chain operation requiring high-level compliance and documentation rigor.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Technical Documentation and Traceability ServicesThe contract requires the preparation and secure submission of DLA Form 918 along with all associated test documentation to ensure complete traceability of components throughout the supply chain, emphasizing accuracy, compliance, and accountability at every stage. This work is critical to maintaining the integrity of defense logistics and ensuring that all parts meet stringent military standards for identification, testing, and documentation. The task is part of a subcontract under the NAICS code 541690, issued by the Active Devices Division of the Department of Defense, with performance centered in Columbus, Ohio, ZIP 43213. Responses must be submitted by August 6, 2026, following the solicitation posted on July 26, 2026, and must align with federal traceability protocols to support defense system reliability and audit readiness. The nature of the work demands strict adherence to documented procedures and secure handling of sensitive technical data.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Regulatory and Compliance Documentation SupportThe contract requires the preparation and submission of comprehensive regulatory documentation including hazard warning labels, safety data sheets, and compliance certifications that meet stringent OSHA, DFARS, and military standards. This work must be completed both prior to contract award and throughout performance to ensure ongoing adherence to federal and defense-specific safety and compliance requirements. The deliverables are critical for enabling the procurement and handling of materials within defense supply chains where regulatory accuracy directly impacts operational readiness and safety. This subcontract is issued under the NAICS code 541690 and is managed by the ASC Commodities Division under the Department of Defense. The place of performance is FPO with a ZIP code of 09587, indicating operations may involve overseas or expeditionary logistics. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, leaving a short window for qualified vendors to submit proposals. While no set-aside type is specified, the contract is part of a larger defense acquisition framework, demanding strict timelines, regulatory precision, and the ability to support military logistics under high-stakes conditions.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Documentation and LabelingThe contract requires the preparation and accurate submission of Safety Data Sheets and hazard labels for all hazardous materials utilized in production processes, ensuring full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001. This work is critical to maintaining regulatory adherence and operational safety across the defense supply chain, with deliverables must meet federal mandates for hazard communication, chemical classification, and labeling consistency. The submission must be finalized and delivered by the response deadline of August 3, 2026, and the effort is structured as a subcontract under NAICS code 541690, managed by the Department of Defense’s Aviation Supply Chain ESOC Buys office. All documentation must be technically precise, legally defensible, and aligned with current federal standards for hazardous material handling and dissemination.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract entails the identification, documentation, and labeling of hazardous materials associated with motors, ensuring full compliance with Department of Defense and OSHA standards. This includes the preparation of Safety Data Sheets and proper labeling protocols to meet regulatory requirements for handling, storage, and transportation of hazardous substances. Work must be performed in accordance with established federal safety guidelines, with emphasis on accuracy, consistency, and documentation integrity to support supply chain safety and operational readiness. This is a small business set-aside subcontract under NAICS code 541690, with performance located at FPO 09587, and is open exclusively to small businesses as defined by the SBA. The solicitation was posted on July 26, 2026, with proposals due by August 6, 2026. The contracting activity falls under the Maritime Supply Chain division of the Department of Defense, and all work must comply with applicable federal regulations governing hazardous material management. While no point of contact is listed, all responses must be submitted through the designated DIBBS portal.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance and SDS PreparationThe contract requires identification of all hazardous components within air breathing hoses and the preparation of Safety Data Sheets that fully comply with OSHA’s 29 CFR 1910.1200 and Federal Standard No. 313, with all documentation to be completed and submitted before the contract award is finalized. This effort is focused on ensuring regulatory adherence for chemical safety and hazard communication, targeting the specific materials used in respiratory equipment. The work must be performed with precision to meet federal standards, and the deliverables are critical for the award process, making timely and accurate compliance non-negotiable. The solicitation is issued under the NAICS code 541690, indicating a professional, scientific, and technical services context, and is classified as a subcontract within the Department of Defense’s Fluid Handling Division. The place of performance is designated as San Diego, California, with a response deadline of August 6, 2026, and the posting date is July 26, 2026, leaving a narrow window of approximately two weeks for submission. There is no set-aside designation provided, meaning the opportunity is open to all eligible vendors without preference based on business size or category. The contractual obligations demand technical expertise in hazardous material analysis and SDS formatting, with no room for deviation from the mandated federal requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires the preparation and submission of Safety Data Sheets (SDS) for hazardous materials to ensure full compliance with OSHA’s 29 CFR 1910.1200 regulations and the Defense Federal Acquisition Regulation Supplement (DFARS) clause 252.223-7001, which governs hazardous materials handling within Department of Defense contracts. This subcontract is specifically tied to the ASC Commodities Division and mandates accurate, up-to-date documentation that conveys hazard information, safe handling procedures, and emergency response protocols for all applicable substances used or distributed under the program. The SDS must meet all formatting, content, and language requirements specified by both federal safety standards and defense acquisition policies to support operational readiness and worker protection. Performance is expected to be executed in support of activities centered in San Diego, California, with a firm deadline for proposal submission set for August 3, 2026. The North American Industry Classification System code 541690 indicates the work falls under other scientific and technical consulting services, suggesting the contractor will provide specialized expertise in chemical safety documentation rather than manufacturing or distribution. While there is no set-aside classification provided, the solicitation is issued through the Defense Logistics Agency’s DIBBS platform, indicating it is open to qualified subcontractors seeking to fulfill defense-related compliance obligations. Contractors must be prepared to work under strict regulatory oversight and deliver documentation that is traceable, audit-ready, and aligned with DoD-specific environmental and safety requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with hazardous materials identification, labeling, and documentation standards for all kits or packaging involved, necessitating the preparation of Material Safety Data Sheets or Safety Data Sheets in accordance with the Globally Harmonized System of Classification and Labeling of Chemicals. All labeling must meet the requirements of OSHA 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement DFARS 252.223-7001 to ensure accurate hazard communication across the supply chain. The contractor is responsible for implementing consistent, compliant procedures for classifying, marking, and documenting hazardous substances used in or with the delivered items. This subcontract, issued under NAICS code 541690 by the Department of Defense’s Land Supplier Operations Vehicle Support office, is focused on ensuring regulatory conformity in hazardous materials handling. The place of performance is designated as New Cumberland, Pennsylvania, with a bid response deadline of August 6, 2026. The solicitation is open for submission through the DIBBS system and carries no set-aside designation, meaning all eligible entities may respond. Compliance with all federal and defense-specific regulations governing hazardous material safety documentation and labeling is mandatory for award and performance.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Hazardous Materials Handling & Labeling ComplianceThe contract seeks subcontractor support for the preparation of hazard communication materials in compliance with OSHA and Defense Logistics Agency standards, specifically focusing on the development of HAZCOM labels and Safety Data Sheets. This work is essential to ensure the safe handling, storage, and transport of hazardous materials within Department of Defense operations, with all deliverables required to meet federal regulatory requirements. The performance location is designated as Phoenix, Arizona, 85043, and the solicitation is classified as a subcontract under NAICS code 541690, indicating it falls under other scientific and technical consulting services. The solicitation was posted on July 26, 2026, with a firm response deadline of August 3, 2026, and is managed by the ASC Supplier Oper AE and AF Division under the Department of Defense. While no specific set-aside provisions or point of contact details are provided, interested parties must navigate the DIBBS platform via the provided UI link to access full solicitation documents and submit proposals. The contract underscores a critical need for accuracy and regulatory adherence in hazard communication documentation to safeguard personnel and maintain operational compliance across defense supply chains.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → RED RIVER RECEIVING BLDG

Same awarding agency

Military Packaging and Marking ServicesThe contract requires the provision of DLA-compliant packaging and the application of permanent, traceable markings in accordance with MIL-STD-130, ensuring that each item is uniquely identified with the contract number, lot number, vendor serial number, and CAGE code. This service is critical for maintaining supply chain integrity and military logistics standards, with all markings being durable and machine-readable to support inventory tracking and asset management across defense operations. The work must be performed at the designated place of performance in Texarkana, Texas, with the zip code 75507-5000. This is a small business set-aside subcontract under the NAICS code 561910, open only to eligible small businesses as defined by the SBA, and is managed by the Department of Defense through the Red River Receiving Bldg. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026. All contractors must meet strict military compliance standards for packaging and marking, and failure to adhere to these requirements could result in rejection of delivered goods and potential contract default. The full opportunity is accessible via the DIBBS platform using the provided link.

Packaging and Labeling Services

POSTED

DEADLINE

Molded Skid Assembly ManufacturingThe contract solicits the manufacture and delivery of 115 precision-molded skid assemblies that must fully comply with military specifications, including adherence to DLA quality standards and MIL-STD-130 marking requirements to ensure proper identification and traceability. These assemblies are critical components intended for military use and must be produced to exacting tolerances with documented compliance throughout the production process. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the SBA are eligible to respond, reinforcing support for small business participation in defense contracting. The NAICS code 326199 categorizes this effort under other plastic product manufacturing, indicating the production involves specialized molding processes beyond standard plastic fabrication. The place of performance is specified as Texarkana, Texas, with a zip code of 75507-5000, and the solicitation was posted on July 26, 2026, with a response deadline set for August 6, 2026. The contracting office is listed under the Department of Defense through the RED RIVER RECEIVING BLDG, and all bids must be submitted through the DIBBS platform at the provided link. Participation requires strict adherence to quality control, documentation protocols, and delivery timelines to meet federal defense supply chain requirements.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

SKID, MOLDEDThe contract specifies the procurement of 115 molded skid assemblies under solicitation number SPE8E6-26-T-3868, with a total small business set-aside designation and a North American Industry Classification System code of 326199. The item is identified by NSA part number 6920-01-168-6145 and must be delivered within 144 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and all items must be marked in compliance with MIL-STD-130, including the contract number, lot number, vendor name (optional), vendor serial number, and vendor CAGE code. Government identification must be removed from non-accepted supplies. Quality requirements for both manufacturers and non-manufacturers are tailored at the contract level. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and the place of performance is Texarkana, Texas, with the Department of Defense via the Red River Receiving Building as the contracting organization. Primary point of contact is Sophia Lim, reachable via email and phone provided.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Small Business Compliance & Socioeconomic Certification SupportThe contract supports a prime contractor in maintaining compliance with small business status and managing socioeconomic certifications through SAM.gov, ensuring eligibility under a Total Small Business Set-Aside as defined by FAR 19.5. The work involves ongoing administrative tasks to verify and update certifications required for federal contracting, with a focus on sustaining small business designation and adhering to SBA guidelines. All activities are tied directly to compliance obligations that impact the prime contractor’s ability to perform under this specific set-aside contract. The solicitation is classified under NAICS code 541611 for management consulting services and is issued by the Department of Defense through the RED RIVER RECEIVING BLDG office. Performance is required at TEXARKANA, Texas, with a zip code of 75507-5000. The contract is a subcontract type, with responses due by August 3, 2026, and was posted on July 23, 2026. The work does not involve direct service delivery to end users but instead provides critical backend support to ensure regulatory adherence and certification integrity for federal procurement eligibility.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging, Preservation, and Military LabelingThe contract requires provision of packaging, preservation, and labeling services that meet strict military standards for the secure shipping and long-term storage of government assets. All work must comply with applicable Department of Defense specifications to ensure durability, environmental protection, and traceability throughout the supply chain. The services are intended for performance at the RED RIVER RECEIVING BLDG facility in Texarkana, Texas, with a zip code of 75507-5000, and must be executed in alignment with military logistics protocols for handling sensitive or mission-critical materials. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside program, limiting eligibility to businesses certified as small under the NAICS code 488999, which covers other support activities for transportation. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026. Participation is facilitated through the DLA DIBBS platform, and all proposers must demonstrate technical competency in military-grade packaging and labeling, including adherence to preservation standards for temperature, moisture, and physical damage protection, as well as proper application of required military markings and barcoding systems.

All Other Support Activities for Transportation

POSTED

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires implementation of NIST SP 800-171 security controls to safeguard covered defense information and ensure readiness for a Department of Defense assessment. This subcontract is designated as a Total Small Business Set-Aside under SBA guidelines, meaning only small business concerns are eligible to respond. The work is tied to the NAICS code 541512, indicating it involves computer systems design and related services focused on cybersecurity compliance. The place of performance is specified as Texarkana, Texas with a zip code of 75507-5000, and the contracting agency is the Department of Defense under the RED RIVER RECEIVING BLDG. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and all proposals must align fully with the NIST control framework to meet DoD requirements for protecting sensitive data.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires strict adherence to OSHA HAZCOM and military standards for the proper labeling and documentation of hazardous components within filter assemblies. All materials must be accurately identified, classified, and marked to ensure compliance with federal workplace safety regulations and defense-specific requirements. The work is designated as a Total Small Business Set-Aside under NAICS code 541690, meaning only qualified small businesses are eligible to respond. Performance of the services is centered at the RED RIVER RECEIVING BLDG in TEXARKANA, with a zip code of 75507-5000, and the solicitation is managed by the Department of Defense. Proposals must be submitted by the deadline of August 3, 2026, and the contract is structured as a subcontract under a larger procurement initiative.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Hydraulic Filter Assembly ManufacturingThe contract is for the manufacture of hydraulic filter assemblies identified by NSN 4820012079289 and part number 606503-3, adhering strictly to military specifications and requiring engineering source approval from the Government Design Control Activity. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, as defined by SBA guidelines under FAR 19.5, with the NAICS code 332999 assigning it to other miscellaneous fabricated metal product manufacturing. The solicitation was posted on July 23, 2026, with a mandatory response deadline of August 3, 2026, and the place of performance is designated as Texarkana, Texas, with a zip code of 75507-5000. The contracting activity is under the Department of Defense through the RED RIVER RECEIVING BLDG, and all work must comply with the technical and quality standards mandated by the government, ensuring full interoperability and reliability for military applications.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Packaging, Labeling & UID Marking ServicesThe contract requires the provision of compliant packaging, barcoding, and unique item identification (UID) marking services for optical lenses and their containers, adhering strictly to MIL-STD-129 for packaging and labeling, MIL-STD-130 for UID marking, and ISO/IEC 16022 for Data Matrix barcodes. All work must meet federal military standards to ensure traceability, durability, and interoperability across Department of Defense logistics systems. The subcontract is open for response until August 3, 2026, and is categorized under NAICS code 323113, indicating it pertains to photographic equipment and supplies manufacturing. The placing agency is the Department of Defense, with performance tied to the RED RIVER RECEIVING BLDG, though specific location details are not provided. All deliverables must be fully compliant with the outlined standards to satisfy contractual obligations and support DOD inventory and supply chain requirements.

Commercial Screen Printing

POSTED

DEADLINE

Inspection & Quality Assurance ServicesThe contract requires independent inspection of optical lenses to evaluate corrosion, usability, and compliance with MIL-STD-1916 and ASQ Z1.4 standards, ensuring rigorous quality control measures are met. Inspections must be conducted with precision, including formal reporting of findings and retention of sampled units for potential future review or audit. The work is classified as a subcontract under NAICS code 541330, and the performance is tied to the Department of Defense through the RED RIVER RECEIVING BLDG. Bidders must respond by August 3, 2026, with the solicitation posted on July 23, 2026, and all activities must align with federal procurement guidelines for defense-related quality assurance services.

Engineering Services

POSTED

DEADLINE

Technical Data & Export Compliance ManagementThe contract concerns the management of ITAR and EAR-controlled technical data, requiring strict compliance with U.S. export control regulations. This includes maintaining accurate records, submitting required export control reports, and implementing measures to prevent unauthorized access or disclosure of sensitive technical information to foreign persons. The work is focused on ensuring full adherence to regulatory frameworks governing the handling, storage, transmission, and dissemination of controlled data in alignment with Department of Defense standards. This is a subcontract under NAICS code 541690, issued by the Department of Defense through the RED RIVER RECEIVING BLDG office, with a response deadline of August 3, 2026. The solicitation was posted on July 23, 2026, and the performance location details are unspecified. Participants must demonstrate capability in export compliance systems, recordkeeping protocols, and personnel training to safeguard controlled technical data. There is no set-aside designation indicated, and all offerors are expected to meet the precise compliance demands tied to defense-related technical documentation management.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Optical Lens Supply – Government Surplus or Reconditioned ComponentsThe contract seeks the procurement and delivery of 94 units of Optical Lens Instruments identified by NSN 6650-01-080-7648, with the items to be sourced as unused government surplus, reconditioned, or remanufactured units, ensuring full traceability and adherence to all applicable military performance and quality standards. Each unit must meet or exceed the original technical specifications and be certified compliant with Department of Defense requirements for functionality, durability, and safety, with documentation proving origin, condition, and refurbishment history where applicable. The solicitation is structured as a subcontract under the Department of Defense, specifically managed by the RED RIVER RECEIVING BLDG, and falls under NAICS code 339112 for other miscellaneous manufacturing. Responses are due by August 3, 2026, with the opportunity posted on July 23, 2026, through the DIBBS platform, and all deliveries are expected to support operational readiness through certified, vetted components.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE