Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and Safety Data Sheet (SDS) Preparation

Active

Federal

Response Deadline08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the development and submission of Safety Data Sheets that comply with OSHA and DFARS regulations for hazardous materials used in air duct hose applications. These SDS documents must accurately detail the chemical composition, potential hazards, handling procedures, emergency measures, and regulatory classifications of the substances involved, ensuring full alignment with federal safety and defense acquisition standards. The work is scoped under a subcontract arrangement with a tight turnaround, as responses are due by August 5, 2026, following a posting date of July 31, 2026, and must be delivered to meet the performance location requirements in San Diego, CA, 92136-3581. The NAICS code 541690 indicates the activity falls under other scientific and technical consulting services, underscoring the technical expertise needed for regulatory compliance rather than manufacturing or supply. The contracting office is the Fluid Handling Division under the Department of Defense, suggesting the deliverables will support defense-related systems where material safety and documentation integrity are critical to operational readiness and regulatory audits.

General Info

Develop OSHA and DFARS-compliant Safety Data Sheets for hazardous materials in air duct hoses, due August 5, 2026, in San Diego.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Development and submission of OSHA- and DFARS-compliant Safety Data Sheets for regulated substances in air duct hose.

Similar Contracts

Same NAICS industry code

Construction Safety Services IDIQThe Port of Seattle has initiated a proactive Construction Safety Services IDIQ to address the growing complexity and liability associated with construction activities on its property. With increasing legal obligations and heightened scrutiny from recent court rulings, the Port is formalizing a comprehensive safety program to ensure all construction projects are conducted without disrupting port operations and with the highest standards of worker and public safety. This initiative is designed to monitor, enforce, and continuously improve safety protocols across all construction sites under Port jurisdiction, reflecting a strategic shift toward risk mitigation and regulatory compliance. The contract is issued under NAICS code 541690 and is structured as an indefinite delivery/indefinite quantity agreement to provide flexible access to qualified safety service providers. The program will support a range of construction activities by integrating expert safety oversight, compliance auditing, and operational coordination directly into project workflows. Point of contact for inquiries is Sue Yi, with Bruce Gamble serving as the Project Manager, and further details can be found through the Port’s official solicitation portal. The forecasted posting date indicates the Port is preparing to solicit proposals in the near future to establish a pool of vetted safety service firms ready to respond to emergent and planned construction needs.

Construction Management

POSTED

DEADLINE

Technical Specification Conformance & Data AnalysisThe contract requires validation of system designs and deliverables against current public technical specifications, with strict adherence to open-source and publicly available standards, explicitly prohibiting access to any DLA-controlled data. The work focuses on ensuring full conformance through analytical methods that rely solely on non-restricted information, emphasizing transparency and compliance without reliance on classified or proprietary materials. Performance must be executed from Kittery, Maine, under the oversight of DLA Maritime - Portsmouth, a Department of Defense agency, with the task falling under NAICS code 541690 for other scientific and technical consulting services. The opportunity is structured as a subcontract with a response deadline of August 11, 2026, and was posted on August 1, 2026. No set-aside type is specified, and the point of contact information is not provided, requiring interested parties to rely on the public SAM.gov listing for further details. The absence of an official address or contact details suggests communication will occur through designated digital channels or designated representatives under the DLA Maritime procurement framework. Contractors must be prepared to demonstrate technical proficiency in interpreting and applying open standards to system evaluations without internal or restricted data sources.

DLA Maritime - Portsmouth

POSTED

about 17 hours ago

DEADLINE

Export Control Compliance (ITAR/EAR) AdvisoryThe contract seeks consulting services to support export control compliance by identifying, classifying, and documenting items subject to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR). The work will include assigning EACN classifications and preparing required disclosure notices to ensure proper handling of controlled technical data and commodities. The services are critical for maintaining regulatory adherence and minimizing legal risk associated with the export of defense-related and sensitive technologies. This subcontract is posted by the University of Kansas under NAICS code 541690, which categorizes other professional, scientific, and technical services. The solicitation was made public on July 31, 2026, with a response deadline of August 14, 2026. The place of performance and specific office address are not designated, indicating flexibility in service delivery. The contract is intended for qualified consultants or firms with demonstrated expertise in U.S. export control regulations and the ability to provide precise, auditable documentation for compliance purposes.

University Of Kansas

POSTED

DEADLINE

Energy Data Management and Reporting ServicesThe contract seeks a subcontractor to provide comprehensive systems and support for managing electricity load profiles, energy usage data, and compliance reporting specifically for the MBTA’s energy management platforms. The scope includes the development, implementation, and ongoing maintenance of technical solutions that accurately capture, analyze, and report energy consumption patterns to ensure regulatory adherence and operational efficiency. The work must enable seamless integration with existing MBTA systems and support sustained data accuracy, timely reporting, and scalability to meet evolving energy management needs. The contract is classified under NAICS code 541690 and is solicited as a subcontract through the Massachusetts Procurement & Logistics agency, with performance based in Boston, Massachusetts, at ZIP code 02116. The solicitation was posted on July 31, 2026, and proposals are due by August 19, 2026. There is no set-aside designation specified, and the contract does not indicate a point of contact. Interested parties must navigate the provided Commbuys link to access full solicitation details and submit responses directly through the official procurement portal.

400000 - Procurement & Logistics

POSTED

DEADLINE

Regulatory Compliance Consultant (OSHA, NFPA 70E, Florida Law)The contract requires a Regulatory Compliance Consultant to ensure full adherence to OSHA standards, NFPA 70E electrical safety codes, Pollution Prevention Plans, and applicable Florida Statutes throughout the duration of performance. The consultant must possess the expertise to interpret and implement these regulatory frameworks across all operational activities, identifying potential violations and recommending corrective actions to maintain compliance. Work must be performed in alignment with the strict safety and environmental protocols mandated by federal and state authorities, with a primary focus on protecting worker safety and minimizing environmental impact. The contract is classified as a subcontract under NAICS code 541690 and was posted on July 31, 2026, with a response deadline of August 31, 2026. While the specific location of performance is not detailed, the oversight jurisdiction is clearly tied to the state of Florida, indicating that all compliance measures must reflect the legal requirements and enforcement practices of Florida agencies. The contracting entity is listed as Procurement under the Florida organization, suggesting the work supports a state-level initiative or public infrastructure project. There is no set-aside designation provided, and no point of contact is listed, implying bidders must rely on the provided portal link for further details or submissions.

POSTED

DEADLINE

Odor and Air Emission Control System DesignBroward County is seeking qualified contractors to design odor and air emission control systems, with a focus on engineering technologies such as biofilters and scrubbers to meet applicable air quality regulatory standards. This subcontract opportunity is open for bids until August 7, 2026, and is classified under NAICS code 541690, indicating it pertains to other scientific and technical consulting services. The project requires technical expertise in developing systems that effectively mitigate odors and emissions, ensuring compliance with environmental regulations. All work is expected to be performed in support of Broward County’s environmental management objectives, though specific performance locations are not detailed. Interested parties must submit responses by the stated deadline to be considered for award.

POSTED

DEADLINE

Range Safety and Operational Compliance ManagementThe contract titled Range Safety and Operational Compliance Management requires the successful bidder to ensure strict adherence to all safety protocols and regulatory standards during firearms training sessions. Responsibilities include enforcing range rules, managing the flow of shooters to maintain order and minimize risk, and actively monitoring designated safety zones to prevent accidents and ensure personnel compliance. The work is critical to maintaining a secure and controlled environment for training activities conducted under the authority of the California Department of Corrections & Rehabilitation. This subcontract is posted on the California eProcurement portal with a response deadline of August 21, 2026, and is classified under NAICS code 541690, which pertains to other scientific and technical consulting services. The place of performance and office address details are not specified, but the work is expected to occur within California under the oversight of the state correctional agency. Bidders must be prepared to demonstrate experience in safety management, operational coordination, and regulatory compliance within high-risk training environments, though no set-aside provisions are indicated for this opportunity.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Hunt Guide Personnel ProvisionThe contract seeks qualified hunting guides who are certified and experienced, with the requirement that all personnel be approved by the Texas Parks and Wildlife Department, including any replacements throughout the contract term. The subcontract is specifically for the provision of guide services aligned with state-managed hunting programs and requires adherence to strict compliance standards set by the agency. Bids must be submitted by August 14, 2026, following a posted solicitation date of July 31, 2026, and the work falls under NAICS code 541690 for other scientific and technical consulting services. Performance is expected within Texas, though specific locations are not detailed, and the contract is managed through the Texas Parks and Wildlife Department using the Texas SmartBuy procurement portal.

Parks and Wildlife Department

POSTED

DEADLINE

Regulatory File Review (Personnel Labor)The contract seeks qualified personnel to perform manual and digital reviews of environmental regulatory files for the Texas Department of Transportation, encompassing permits, agency correspondence, and enforcement actions. The work involves meticulous examination of documentation to ensure compliance with environmental regulations, requiring individuals with expertise in environmental law, regulatory frameworks, and data analysis. The position is structured as a subcontract and falls under NAICS code 541690, indicating it is classified as other scientific and technical consulting services. Interested parties must submit responses by August 14, 2026, with the solicitation posted on July 31, 2026. There is no specified set-aside designation, and the place of performance details are not provided, suggesting work may be performed remotely or across Texas. The office address and point of contact information are also unavailable, indicating that all communications and submissions will be handled through the designated online portal at bonfirehub.com. Success in this contract will depend on the ability to deliver accurate, timely, and thorough reviews of complex regulatory materials.

Texas Department Of Transportation

POSTED

DEADLINE

Irrigation System Programming and OptimizationThe contract entails the programming and optimization of SmartLine irrigation controllers to enhance water conservation by dynamically adjusting irrigation schedules based on real-time weather patterns, seasonal changes, and soil moisture conditions. The work involves developing and implementing intelligent algorithms that ensure optimal water use across designated areas, reducing waste while maintaining landscape health. The project is structured as a subcontract under the California Department of Transportation and is focused on performance in San Diego, with a requirement to align with environmental sustainability goals through precision irrigation technology. The solicitation was posted on July 31, 2026, and responses are due by August 18, 2026, at 11:00 PM. The North American Industry Classification System code 541690 applies, indicating the nature of the work as other scientific and technical consulting services. The contract does not specify a set-aside designation or designated organization type, and there is no provided point of contact within the contract data. The primary objective is to deliver a scalable, adaptive irrigation management system that reduces water consumption in public infrastructure areas under Caltrans oversight.

California Department of Transportation

POSTED

DEADLINE

Hazardous Materials Documentation (MSDS/SDS Compliance Support)The contract requires the preparation and submission of Safety Data Sheets for hazardous materials utilized in crate manufacturing or packaging processes, with strict adherence to OSHA’s Hazard Communication Standard. This work ensures that all chemical substances involved in the production or packaging of crates are properly documented, categorized, and labeled according to federal safety regulations, facilitating workplace safety and regulatory compliance. The scope includes accurate data collection, proper classification of hazards, translation of technical information into standardized SDS formats, and timely delivery of documents to meet regulatory timelines. The solicitation is positioned as a subcontract under NAICS code 541690, indicating it falls under other scientific and technical consulting services, and is managed by the Maryland Police Department. Responses must be submitted by August 12, 2026, with the opportunity posted on July 31, 2026. While the specific location of performance is not detailed, the work must be executed to meet federal compliance standards regardless of geographic origin. The contract does not specify set-aside status or point of contact details, and bidders are directed to the provided online portal for additional submission instructions.

Police Department

POSTED

DEADLINE

Software Security and Compliance AssessmentTexas A&M University is seeking a subcontractor to conduct comprehensive security audits and vulnerability testing on its AI platform, ensuring alignment with FERPA and other applicable data privacy regulations. The scope includes evaluating system defenses, identifying potential security gaps, and implementing measures to maintain regulatory compliance throughout the platform’s lifecycle. The solicitation was posted on July 31, 2026, with a response deadline of August 27, 2026, and falls under NAICS code 541690 for other scientific and technical consulting services. The work is expected to be performed in support of the university’s operational environment, though specific geographic location details are not provided. Interested parties must submit proposals through the Texas SmartBuy portal by the stated deadline to be considered for award.

Texas A&M University

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Packaging, Labeling, and Compliance Services for DLA ShipmentThe contract requires specialized packaging, preservation, and labeling services in full compliance with DLA RP001 and MIL-STD-129 standards for items identified by NSN codes, ensuring they meet stringent Department of Defense requirements for military logistics. All work must adhere to exacting specifications for durability, environmental protection, and traceability to support secure and efficient shipment and handling across the defense supply chain. The performance location is designated as San Diego, California, with the work falling under the NAICS code 561910 for other support services, indicating a focus on logistical and technical support rather than manufacturing. This is a subcontract opportunity issued by the Fluid Handling Division of the Department of Defense, with responses due by August 5, 2026. The solicitation is accessible via the DIBBS platform and is intended for contractors capable of delivering compliant packaging solutions that align with federal military standards. There is no specified set-aside status, meaning the opportunity is open to all qualified entities. The timeframe for submission is limited, requiring prompt preparation and adherence to technical, documentation, and delivery requirements tied to the NSN-coded inventory managed by DLA.

Packaging and Labeling Services

POSTED

DEADLINE

Manufacture and Supply of Air Duct Hose (NSN: 4720-01-386-4619)The contract requires the manufacturing, packaging, labeling, and FOB Origin delivery of 52 units of HOSE, AIR DUCT with National Stock Number 4720-01-386-4619, all of which must fully comply with Defense Logistics Agency and military specifications. The work is scoped to ensure the product meets stringent defense standards for performance, durability, and quality, with delivery tied to the FOB Origin term meaning the contractor is responsible for all costs and risks until the product is loaded at the designated origin point. The place of performance is specified as San Diego, California, with a zip code of 92136-3581, indicating where the product must be prepared for shipment. This is a subcontract under the Department of Defense’s Fluid Handling Division, classified under NAICS code 332999 for other fabricated metal product manufacturing. The opportunity was posted on July 31, 2026, with a response deadline of August 5, 2026, giving potential suppliers a five-day window to submit proposals. Participation requires full adherence to federal defense procurement protocols, including compliance with all relevant military specifications and documentation requirements. The contract’s purpose is to support defense logistics by delivering a critical component used in aircraft or vehicle air duct systems, and bidders must demonstrate proven capability in producing militarily compliant hose assemblies at the specified volume and quality standards.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Export-Controlled Technical Data ManagementThe contract requires the management of technical data subject to International Traffic in Arms Regulations and Export Administration Regulations, ensuring strict control over access to sensitive information to prevent unauthorized disclosure to foreign persons. Key responsibilities include implementing deemed export controls, monitoring personnel access, and maintaining compliance with U.S. export control laws through systematic procedural safeguards and documentation. The subcontractor must establish and enforce protocols that align with Defense Department standards for handling controlled technical data, particularly within environments where foreign nationals may be present. Training programs must be developed and delivered to all relevant personnel to foster awareness of export control obligations, identify potential violations, and reinforce proper handling procedures for restricted information. Performance is tied to a specific location identified as FPO with ZIP code 96677, and the work falls under NAICS code 541690 for other scientific and technical consulting services. The opportunity is posted under the Department of Defense’s Fluid Handling Division with a response deadline of August 5, 2026, and is open for submission as a subcontract under a broader government contract vehicle.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires support for the implementation of NIST SP 800-171 security controls to ensure compliance with DFARS 252.204-7012 and FAR 52.204-21, with the ultimate goal of preparing for a third-party assessment to achieve CMMC Level 2 certification. This effort involves aligning organizational processes, technical safeguards, and documentation practices to meet the detailed requirements of the NIST framework and the Department of Defense’s cybersecurity standards for handling controlled unclassified information. The work must be completed in time for a formal assessment under the CMMC program, which verifies that the contractor has fully integrated and operationalized the necessary controls. The contract is structured as a subcontract under the NAICS code 541512, indicating it relates to computer systems design services, and the place of performance is designated as FPO with a ZIP code of 96677. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026, creating a narrow window for submission. Although specific contact information is not provided, the contracting activity falls under the Fluid Handling Division of the Department of Defense, suggesting the work supports critical defense-related systems and infrastructure that require heightened cybersecurity protections. Successful fulfillment of this contract will enable the prime contractor or end client to maintain eligibility for DoD contracts that mandate CMMC Level 2 compliance.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & Packaging ServicesThe contract requires full compliance with hazardous materials labeling, documentation, and packaging standards as mandated by OSHA HazCom, MIL-STD-129, and Federal Standard 313, ensuring all hazardous substances are properly identified, stored, and transported according to federal and military regulations. Central to this obligation is the accurate generation and maintenance of Safety Data Sheets, alongside ongoing compliance support to meet evolving regulatory requirements. All work must be performed in alignment with these standards to guarantee safety, traceability, and legal adherence across the supply chain. This subcontract is issued by the Fluid Handling Division under the Department of Defense, with performance expected at FPO, ZIP 96677. The solicitation was posted on July 31, 2026, and responses are due by August 5, 2026, under NAICS code 541620, which pertains to administrative management and general management consulting services. The nature of the work demands specialized expertise in hazardous material logistics and regulatory adherence, with no set-aside provisions indicated. The contract is part of a broader DOD initiative to maintain consistent and secure handling of hazardous materials across defense operations.

Environmental Consulting Services

POSTED

DEADLINE

Chrome-Molybdenum Steel Pipe Fittings SupplyThe contract calls for the supply of four chrome-molybdenum steel butt-welding pipe elbows, each sized at 2-inch IPS with a 45-degree angle, rated for 600 PSI and constructed to Schedule 40 thickness, fully compliant with ASTM A234 Grade WP11 and ANSI B16.9 specifications. These fittings are critical components for high-pressure fluid handling systems requiring superior strength and corrosion resistance, and must be delivered in strict adherence to the outlined material and dimensional standards. The items are intended for deployment in defense-related infrastructure where reliability under extreme operating conditions is non-negotiable. Issued by the Fluid Handling Division within the Department of Defense, the contract is categorized as a subcontract posted on July 31, 2026, with responses due by August 5, 2026. The place of performance is designated as FPO, zip code 96677, indicating delivery to a military postal location, likely for overseas or remote operational use. The North American Industry Classification System code 332439 confirms the focus on other fabricated metal product manufacturing, aligning with the specialized nature of these pipe fittings. All bids must meet technical compliance without deviation, and timing is critical as the solicitation window is tightly constrained to five days.

Other Metal Container Manufacturing

POSTED

DEADLINE

STEM, NEEDLE VALVE

Solicitation # SPE7M4-26-U-0404

The contract solicitation SPE7M4-26-U-0404 seeks the supply of 2,445 units of a STEM, NEEDLE VALVE with NSN 4820014730651 under a Firm-Fixed-Price arrangement, with delivery required within 126 days after award and FOB Origin terms. The item is subject to stringent packaging requirements under MIL-STD-2073-1E, including clean/dry preservation without chemical treatments, unit packaging in fiberboard boxes, intermediate containment of 100 units per box, and outer packaging marked in accordance with MIL-STD-129, which mandates 2D Data Matrix barcodes and excludes any special marking. Palletization must comply with DLA Packaging Requirements for Procurement (RP001) and hazardous materials handling standards, requiring labeling per 29 CFR 1910.1200 and submission of material safety data prior to award if applicable. Inspection and acceptance occur at the destination, with full government responsibility for verifying compliance with technical, packaging, and marking standards, including adherence to the DLA Master List of Technical and Quality Requirements. The contract operates as an Indefinite-Delivery Contract with a maximum ceiling value of $350,000, containing a guaranteed minimum of 366 units after binding, and imposes ordering limits of 611 EA minimum and $350,000 maximum per order, with a seven-day aggregation cap for orders from the same office. Contractual obligations are not triggered until the first delivery order is accepted, and all shipments via ocean transport must use U.S.-flag vessels unless a formal waiver is granted at least 45 days in advance. Compliance with a wide array of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses is mandatory, including requirements for cybersecurity safeguarding, trafficking in persons prevention, employment eligibility verification, sustainable product procurement, prohibition of hexavalent chromium, export control, electronic payment via WAWF, and safeguarding of covered defense information. Offerors must provide their Unique Entity ID and CAGE code, disclose size and socioeconomic status (including WOSB, SDVOSB, HUBZone, or SDB certifications), and affirm compliance with restrictions on procurement from Communist Chinese military companies and prohibited telecommunications equipment. All proposals must be submitted electronically via the DLA-BSM Internet Bid Board System by the July 31, 2

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-271N

The contract seeks the procurement of 134 metallic tubes designated for use as aircraft tow bars, identified by NSN 4710-01-289-2302 and part number 1479AS101-3, under a simplified acquisition process with a total small business set-aside. Delivery is required within 122 days after the date of order, with a final need ship date of December 1, 2026, and an absolute deadline of September 5, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is fixed-price and includes detailed technical and quality requirements derived from the DLA Master List of Technical and Quality Requirements, mandating adherence to standards such as MIL-STD-129 for marking and packaging, ASTM D3951 for packaging, and MIL-A-8625 for anodic coating. All items must be permanently marked with producer identification, specification, composition, size, contract number, NSN, and seam type, and must comply with DLA packaging requirements and hazardous material labeling under 29 CFR 1910.1200 and MIL-STD-129 for radioactive content thresholds. The supplier must be certified as a CMMC Level 2 C3PAO and comply with DFARS 252.204-7012 for the protection of covered defense information, implementing NIST SP 800-171 security controls. Safety Data Sheets must be submitted prior to award and updated for any composition changes, and all hazardous materials must be labeled per regulatory standards. Quality conformance requires the submission of a Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and uploaded electronically to iRAPT along with certified test reports. Inspection and acceptance occur at origin by the Government, with the contractor responsible for maintaining compliance throughout production. The contract prohibits Class I ozone-depleting chemicals and mandates configuration change management and removal of government identification from non-accepted items. Electronic submission via the DLA-BSM Internet Bid Board System is required by the August 5, 2026 deadline, with all documentation, including COQC, SDS, and bar-coded labels, governed by DLA’s e-procurement protocols and submitted through WAWF for invoicing and receiving.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-258S

The contract specifies the procurement of 52 units of HOSE, AIR DUCT with NSN 4720-01-386-4619 and part number 713874-101 from ARROWHEAD PRODUCTS CORP, priced at $52.00 per unit, totaling a contract value of $2,704.00. Delivery is required within 92 days from the contract award, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, though DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must adhere strictly to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with a need ship date of November 4, 2025, and an original required delivery date of December 20, 2025. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7M4-26-T-258S, issued under a federal procurement, with a response deadline of August 5, 2026, and the primary point of contact is Blake Tushar. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by solicitation or award dates depending on acquisition size. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies per RQ011.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

STRAINER ELEMENT, SE

Solicitation # SPE7M3-26-T-7565

The contract pertains to the procurement of nine Strainer Elements, Sediment, identified by NSN 4730014689945 and part number 120-45-S08211, under solicitation SPE7M3-26-T-7565, issued by the Defense Logistics Agency’s Fluid Handling Division. The acquisition is structured as a total small business set-aside under NAICS code 332996, with delivery required within 203 days after receipt of order, targeting a need ship date of February 20, 2027. Goods are to be delivered FOB origin to the DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance also occurring at the destination. The unit of issue is each, with a unit price of $9.00, totaling $81.00 for the quantity ordered. Packaging and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including specific codes for preservation, wrapping, cushioning, and container types, with palletization governed by DLA’s RP001 requirements. No special marking is required, but hazardous material compliance is mandatory per 29 CFR 1910.1200 and NAVSEA 5100-003D, prohibiting intentional introduction of mercury or mercury compounds unless exempted for functional applications like batteries or sensors, which must include secondary containment. Invoicing is exclusively through Wide Area WorkFlow, and payment processing relies on DoDAAC routing information specified in the final award. Technical and quality requirements are incorporated via the DLA Master List identified by R or I numbers, and all contractors must comply with a suite of FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous materials, cybersecurity (NIST SP 800-171), whistleblower rights, and subcontracting for commercial items. Contractors must maintain valid UEI and CAGE codes, certify small business status through SAM.gov, and submit required representations via DIBBS by the August 5, 2026 deadline, with no formal evaluation factors or pricing data published in the solicitation beyond the nominal unit cost.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

FERRULE, BRAZING, TUBE F

Solicitation # SPE7M3-26-T-7567

The contract is for the procurement of 22 ferrules for brazing tube fittings, identified by NSN 4730-01-219-8323, under solicitation SPE7M3-26-T-7567, issued by the Defense Logistics Agency’s Fluid Handling Division. This is a total small business set-aside under FAR 19.5 with a NAICS code of 332912, and it requires engineering source approval due to its critical application and restricted source status, with only three approved suppliers explicitly listed. The item must be delivered FOB origin in 191 days to DLA Distribution in San Diego, California, with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all markings must adhere to MIL-STD-129, including proper barcoding and hazardous material labeling per 29 CFR 1910.1200. Palletization must follow RP001, and packaging must include the correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or ASQ H1331, with critical attributes requiring an AQL of 0.1. The contractor must use Wide Area WorkFlow for invoicing and payment submission and is bound by comprehensive clauses related to cybersecurity (NIST SP 800-171), export controls, trafficking in persons, employment eligibility verification, sustainable products, and the prohibition of hexavalent chromium and toxic substances. Ocean transportation requires U.S.-flag vessels unless a prior waiver is obtained, with detailed reporting obligations for any foreign-flag shipments. Hazardous materials must be accompanied by Safety Data Sheets and properly labeled, and all requirements flow down to subcontractors. The contract is firm-fixed-price in structure, though not explicitly stated, and all proposals must be submitted electronically via DIBBS by the August 5, 2026 deadline, with no hardcopy submissions allowed.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-26-T-235W

The contract is for the procurement of a metal tube assembly identified by NSN 4710-01-055-9993, with a quantity of six units requested under purchase order 7014132281. The solicitation was issued by the Defense Logistics Agency under the Department of Defense, with solicitation number SPE7M4-26-T-235W, and was posted on July 7, 2026. Interested parties must submit responses by the deadline of July 20, 2026. The contract falls under a federal procurement and does not specify a set-aside program or NAICS code. The place of performance and office address details are not provided, and there is no listed point of contact. The full solicitation details can be accessed via the DIBBS system using the provided UI link.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE