Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Packaging, Labeling, and Compliance Services for DLA Shipment

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires specialized packaging, preservation, and labeling services in full compliance with DLA RP001 and MIL-STD-129 standards for items identified by NSN codes, ensuring they meet stringent Department of Defense requirements for military logistics. All work must adhere to exacting specifications for durability, environmental protection, and traceability to support secure and efficient shipment and handling across the defense supply chain. The performance location is designated as San Diego, California, with the work falling under the NAICS code 561910 for other support services, indicating a focus on logistical and technical support rather than manufacturing. This is a subcontract opportunity issued by the Fluid Handling Division of the Department of Defense, with responses due by August 5, 2026. The solicitation is accessible via the DIBBS platform and is intended for contractors capable of delivering compliant packaging solutions that align with federal military standards. There is no specified set-aside status, meaning the opportunity is open to all qualified entities. The timeframe for submission is limited, requiring prompt preparation and adherence to technical, documentation, and delivery requirements tied to the NSN-coded inventory managed by DLA.

General Info

Provide DLA RP001 and MIL-STD-129 compliant packaging for NSN items in San Diego by August 5, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

561910 - Packaging and Labeling ServicesView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Specialized military-compliant packaging, preservation, and labeling per DLA RP001 and MIL-STD-129 for NSN-coded items.

Similar Contracts

Same NAICS industry code

NAICS: 561910
New
DIBBS
Military-Compliant Packaging & PreservationThe contract requires the packaging and preservation of assembled adapter kits in strict compliance with MIL-STD-2073-1E, specifically employing preservation method 10, which entails cling wrapping and drying to ensure long-term protection against environmental degradation. The work includes appropriate cushioning materials to prevent damage during handling and transit, as well as the consolidation of all components into single, properly labeled boxes to meet military logistics standards. All packaging must adhere to the rigorous durability, labeling, and containment requirements defined by the military standard to ensure readiness and compatibility with defense supply chains. This subcontract is issued under NAICS code 561910, indicating it falls under Other Support Activities for Transportation, and is tied to the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 31, 2026, with responses due by August 5, 2026, creating a tight five-day window for submission. Interested parties must respond through the official DIBBS portal using the provided reference number SPE4A726T519U. There is no set-aside designation specified, meaning the contract is open to all qualified subcontractors regardless of business size or ownership status.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 561910
New
Federal
Military-Compliant Packaging and Labeling ServicesThe contract requires the packaging and labeling of engineering plastic rods and shipping containers in full compliance with MIL-STD-129 standards, including the application of AI-coded barcodes, serialized product labels, and specific handling markings to ensure traceability and military readiness. All work must adhere to strict defense logistics protocols, with an emphasis on accuracy, durability, and uniformity across all labeled items and containers to support DoD supply chain operations. The deliverables are intended for performance at Crane, Indiana, with a zip code of 47522, and the contract is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside category, classified under NAICS code 561910 for other support services. The solicitation remains open until August 14, 2026, at 8:00 PM Eastern Time, with the opportunity posted on SAM.gov on July 31, 2026. The award will be made under a subcontract structure, and the contracting activity is managed by the Naval Surface Warfare Center, Crane Division, under the Department of Defense. While no point of contact is listed, interested parties must submit proposals through the official SAM.gov portal to be considered. Compliance with all labeling and packaging specifications is mandatory, and failure to meet MIL-STD-129 requirements will result in rejection of deliverables, regardless of other qualifications.
Nswc Crane

POSTED

1 day ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332999
New
DIBBS
Manufacture and Supply of Air Duct Hose (NSN: 4720-01-386-4619)The contract requires the manufacturing, packaging, labeling, and FOB Origin delivery of 52 units of HOSE, AIR DUCT with National Stock Number 4720-01-386-4619, all of which must fully comply with Defense Logistics Agency and military specifications. The work is scoped to ensure the product meets stringent defense standards for performance, durability, and quality, with delivery tied to the FOB Origin term meaning the contractor is responsible for all costs and risks until the product is loaded at the designated origin point. The place of performance is specified as San Diego, California, with a zip code of 92136-3581, indicating where the product must be prepared for shipment. This is a subcontract under the Department of Defense’s Fluid Handling Division, classified under NAICS code 332999 for other fabricated metal product manufacturing. The opportunity was posted on July 31, 2026, with a response deadline of August 5, 2026, giving potential suppliers a five-day window to submit proposals. Participation requires full adherence to federal defense procurement protocols, including compliance with all relevant military specifications and documentation requirements. The contract’s purpose is to support defense logistics by delivering a critical component used in aircraft or vehicle air duct systems, and bidders must demonstrate proven capability in producing militarily compliant hose assemblies at the specified volume and quality standards.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2)The contract requires support for the implementation of NIST SP 800-171 security controls to ensure compliance with DFARS 252.204-7012 and FAR 52.204-21, with the ultimate goal of preparing for a third-party assessment to achieve CMMC Level 2 certification. This effort involves aligning organizational processes, technical safeguards, and documentation practices to meet the detailed requirements of the NIST framework and the Department of Defense’s cybersecurity standards for handling controlled unclassified information. The work must be completed in time for a formal assessment under the CMMC program, which verifies that the contractor has fully integrated and operationalized the necessary controls. The contract is structured as a subcontract under the NAICS code 541512, indicating it relates to computer systems design services, and the place of performance is designated as FPO with a ZIP code of 96677. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026, creating a narrow window for submission. Although specific contact information is not provided, the contracting activity falls under the Fluid Handling Division of the Department of Defense, suggesting the work supports critical defense-related systems and infrastructure that require heightened cybersecurity protections. Successful fulfillment of this contract will enable the prime contractor or end client to maintain eligibility for DoD contracts that mandate CMMC Level 2 compliance.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332919
New
DIBBS
STEM, NEEDLE VALVE
Solicitation # SPE7M4-26-U-0404
The contract solicitation SPE7M4-26-U-0404 seeks the supply of 2,445 units of a STEM, NEEDLE VALVE with NSN 4820014730651 under a Firm-Fixed-Price arrangement, with delivery required within 126 days after award and FOB Origin terms. The item is subject to stringent packaging requirements under MIL-STD-2073-1E, including clean/dry preservation without chemical treatments, unit packaging in fiberboard boxes, intermediate containment of 100 units per box, and outer packaging marked in accordance with MIL-STD-129, which mandates 2D Data Matrix barcodes and excludes any special marking. Palletization must comply with DLA Packaging Requirements for Procurement (RP001) and hazardous materials handling standards, requiring labeling per 29 CFR 1910.1200 and submission of material safety data prior to award if applicable. Inspection and acceptance occur at the destination, with full government responsibility for verifying compliance with technical, packaging, and marking standards, including adherence to the DLA Master List of Technical and Quality Requirements. The contract operates as an Indefinite-Delivery Contract with a maximum ceiling value of $350,000, containing a guaranteed minimum of 366 units after binding, and imposes ordering limits of 611 EA minimum and $350,000 maximum per order, with a seven-day aggregation cap for orders from the same office. Contractual obligations are not triggered until the first delivery order is accepted, and all shipments via ocean transport must use U.S.-flag vessels unless a formal waiver is granted at least 45 days in advance. Compliance with a wide array of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses is mandatory, including requirements for cybersecurity safeguarding, trafficking in persons prevention, employment eligibility verification, sustainable product procurement, prohibition of hexavalent chromium, export control, electronic payment via WAWF, and safeguarding of covered defense information. Offerors must provide their Unique Entity ID and CAGE code, disclose size and socioeconomic status (including WOSB, SDVOSB, HUBZone, or SDB certifications), and affirm compliance with restrictions on procurement from Communist Chinese military companies and prohibited telecommunications equipment. All proposals must be submitted electronically via the DLA-BSM Internet Bid Board System by the July 31, 2
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-271N
The contract seeks the procurement of 134 metallic tubes designated for use as aircraft tow bars, identified by NSN 4710-01-289-2302 and part number 1479AS101-3, under a simplified acquisition process with a total small business set-aside. Delivery is required within 122 days after the date of order, with a final need ship date of December 1, 2026, and an absolute deadline of September 5, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is fixed-price and includes detailed technical and quality requirements derived from the DLA Master List of Technical and Quality Requirements, mandating adherence to standards such as MIL-STD-129 for marking and packaging, ASTM D3951 for packaging, and MIL-A-8625 for anodic coating. All items must be permanently marked with producer identification, specification, composition, size, contract number, NSN, and seam type, and must comply with DLA packaging requirements and hazardous material labeling under 29 CFR 1910.1200 and MIL-STD-129 for radioactive content thresholds. The supplier must be certified as a CMMC Level 2 C3PAO and comply with DFARS 252.204-7012 for the protection of covered defense information, implementing NIST SP 800-171 security controls. Safety Data Sheets must be submitted prior to award and updated for any composition changes, and all hazardous materials must be labeled per regulatory standards. Quality conformance requires the submission of a Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and uploaded electronically to iRAPT along with certified test reports. Inspection and acceptance occur at origin by the Government, with the contractor responsible for maintaining compliance throughout production. The contract prohibits Class I ozone-depleting chemicals and mandates configuration change management and removal of government identification from non-accepted items. Electronic submission via the DLA-BSM Internet Bid Board System is required by the August 5, 2026 deadline, with all documentation, including COQC, SDS, and bar-coded labels, governed by DLA’s e-procurement protocols and submitted through WAWF for invoicing and receiving.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-258S
The contract specifies the procurement of 52 units of HOSE, AIR DUCT with NSN 4720-01-386-4619 and part number 713874-101 from ARROWHEAD PRODUCTS CORP, priced at $52.00 per unit, totaling a contract value of $2,704.00. Delivery is required within 92 days from the contract award, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, though DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must adhere strictly to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with a need ship date of November 4, 2025, and an original required delivery date of December 20, 2025. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7M4-26-T-258S, issued under a federal procurement, with a response deadline of August 5, 2026, and the primary point of contact is Blake Tushar. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by solicitation or award dates depending on acquisition size. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies per RQ011.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SE
Solicitation # SPE7M3-26-T-7565
The contract pertains to the procurement of nine Strainer Elements, Sediment, identified by NSN 4730014689945 and part number 120-45-S08211, under solicitation SPE7M3-26-T-7565, issued by the Defense Logistics Agency’s Fluid Handling Division. The acquisition is structured as a total small business set-aside under NAICS code 332996, with delivery required within 203 days after receipt of order, targeting a need ship date of February 20, 2027. Goods are to be delivered FOB origin to the DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance also occurring at the destination. The unit of issue is each, with a unit price of $9.00, totaling $81.00 for the quantity ordered. Packaging and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including specific codes for preservation, wrapping, cushioning, and container types, with palletization governed by DLA’s RP001 requirements. No special marking is required, but hazardous material compliance is mandatory per 29 CFR 1910.1200 and NAVSEA 5100-003D, prohibiting intentional introduction of mercury or mercury compounds unless exempted for functional applications like batteries or sensors, which must include secondary containment. Invoicing is exclusively through Wide Area WorkFlow, and payment processing relies on DoDAAC routing information specified in the final award. Technical and quality requirements are incorporated via the DLA Master List identified by R or I numbers, and all contractors must comply with a suite of FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous materials, cybersecurity (NIST SP 800-171), whistleblower rights, and subcontracting for commercial items. Contractors must maintain valid UEI and CAGE codes, certify small business status through SAM.gov, and submit required representations via DIBBS by the August 5, 2026 deadline, with no formal evaluation factors or pricing data published in the solicitation beyond the nominal unit cost.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332912
New
DIBBS
FERRULE, BRAZING, TUBE F
Solicitation # SPE7M3-26-T-7567
The contract is for the procurement of 22 ferrules for brazing tube fittings, identified by NSN 4730-01-219-8323, under solicitation SPE7M3-26-T-7567, issued by the Defense Logistics Agency’s Fluid Handling Division. This is a total small business set-aside under FAR 19.5 with a NAICS code of 332912, and it requires engineering source approval due to its critical application and restricted source status, with only three approved suppliers explicitly listed. The item must be delivered FOB origin in 191 days to DLA Distribution in San Diego, California, with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all markings must adhere to MIL-STD-129, including proper barcoding and hazardous material labeling per 29 CFR 1910.1200. Palletization must follow RP001, and packaging must include the correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or ASQ H1331, with critical attributes requiring an AQL of 0.1. The contractor must use Wide Area WorkFlow for invoicing and payment submission and is bound by comprehensive clauses related to cybersecurity (NIST SP 800-171), export controls, trafficking in persons, employment eligibility verification, sustainable products, and the prohibition of hexavalent chromium and toxic substances. Ocean transportation requires U.S.-flag vessels unless a prior waiver is obtained, with detailed reporting obligations for any foreign-flag shipments. Hazardous materials must be accompanied by Safety Data Sheets and properly labeled, and all requirements flow down to subcontractors. The contract is firm-fixed-price in structure, though not explicitly stated, and all proposals must be submitted electronically via DIBBS by the August 5, 2026 deadline, with no hardcopy submissions allowed.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details