Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and Safety Data Sheet (SDS) Preparation

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Hazardous Materials Compliance and Safety Data Sheet (SDS) Preparation requires the identification and thorough documentation of hazardous components within materials handled by the Fluid Handling Division of the Department of Defense. The successful contractor must ensure full compliance with federal hazard communication standards by preparing accurate, up-to-date Safety Data Sheets that align with regulatory requirements. All work must be performed to support safe handling, storage, and transport of hazardous substances, with a focus on clarity, consistency, and regulatory adherence across all documentation. Performance of this subcontract is specified to occur in Baltimore, Maryland, with a response deadline of August 3, 2026, and the solicitation was posted on July 22, 2026. The contract falls under the NAICS code 541690, which categorizes it under other scientific and technical consulting services. Although no specific set-aside or organization type is indicated, the work is intended for a subcontractor supporting defense-related operations. The contractor must be prepared to meet strict compliance timelines and deliver documentation that meets federal safety protocols without deviation.

General Info

Prepare compliant SDS for DoD hazardous materials in Baltimore by August 3, 2026, per federal safety standards.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

BALTIMORE, MD, 21226-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identification and documentation of hazardous components, including SDS preparation and compliance with federal hazard communication standards.

Similar Contracts

Same NAICS industry code

ADA CONSULTANTMHMR of Tarrant County is soliciting proposals from qualified consultants to deliver comprehensive Americans with Disabilities Act (ADA) consulting services aimed at ensuring full compliance with federal, state, and local accessibility regulations. The selected consultant will be responsible for conducting detailed accessibility assessments of facilities, programs, services, and digital assets, identifying existing compliance gaps, and providing actionable recommendations for corrective measures. In addition to evaluating current conditions, the consultant will support the development and implementation of long-term ADA compliance strategies, offering ongoing technical guidance and delivering training to staff to foster an organizational culture of accessibility and inclusion. Proposals must be submitted by August 6, 2026, at 8:30 PM CT, and inquiries should be directed to Rebecca Walsh, Procurement Manager, or Randall Elder, Procurement Buyer, through the provided contact information. The contract will be managed by MHMR of Tarrant County, located in Fort Worth, Texas, with performance expected to occur across its service areas within the state. The solicitation number is RFP26019, posted on July 22, 2026, and is open to firms or individuals with demonstrable expertise in ADA compliance, accessibility standards, and regulatory requirements applicable to public sector entities. All relevant documentation is available via the official procurement portal linked in the solicitation details.

MHMR OF TARRANT COUNTY

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance and Packaging ServicesThe contract seeks specialized subcontracted services to ensure full regulatory compliance for hazardous materials handling, with a focus on Safety Data Sheet preparation, military-compliant packaging, and labeling adhering to MIL-STD-129 and OSHA standards. The work requires precise alignment with federal safety and transportation regulations to support defense supply chain operations, ensuring all hazardous materials are documented, packaged, and marked in accordance with strict military and occupational safety protocols. The subcontractor must demonstrate expertise in both environmental compliance and defense logistics to meet the stringent requirements of the Department of Defense. This opportunity is designated as a Total Small Business Set-Aside under the NAICS code 541690, reserved exclusively for small business entities and administered by the Maritime Supply Chain division of the Department of Defense. Proposals must be submitted by August 6, 2026, following the July 22, 2026 posting date, with performance likely centered on defense-related logistics centers, though specific locations are not detailed. The subcontractor will be expected to deliver consistent, auditable compliance outcomes critical to safe and lawful hazardous material movement within military supply networks.

MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract requires the design, production, and submission of fully compliant labels for hazardous materials in accordance with OSHA Hazard Communication Standard, Consumer Product Safety Act, Federal Hazardous Substances Act, and MIL-STD-129. All labels must include standardized GHS pictograms and be matched with accurate Safety Data Sheets to ensure regulatory alignment across federal, military, and consumer safety frameworks. The work is to be performed in Tracy, California, with a submission deadline of July 28, 2026, and falls under the NAICS code 541690 for other scientific and technical consulting services. This subcontract is issued by the Department of Defense through DLA Dist San Joaquin and is not set aside for any specific small business category. Compliance with exact specifications and timely delivery are essential, as failure to meet requirements could affect supply chain safety and operational readiness.

DLA DIST SAN JOAQUIN

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling SupportThe contract seeks regulatory compliance support for hazardous materials, focusing on the preparation and submission of hazard warning labels and Material Safety Data Sheets in accordance with DFARS and OSHA requirements. This subcontract is issued by the Department of Defense through its San Diego office, with performance expected to occur in San Diego, California, at ZIP code 92136-3581. The work is classified under NAICS code 541690, indicating it involves other scientific and technical consulting services, specifically related to hazardous material documentation and regulatory adherence. Interested parties must submit responses by August 3, 2026, and the opportunity was posted on July 22, 2026, with no set-aside type specified, leaving it open to all eligible subcontractors. The contract does not include a designated point of contact, and all inquiries must be directed through the provided DIBBS link.

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThis contract requires strict adherence to hazardous materials compliance standards, mandating the correct application and management of hazard warning labels and Safety Data Sheets in accordance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200. The work involves ensuring all hazardous materials used or handled under the subcontract meet federal regulatory requirements for labeling, documentation, and information dissemination to protect worker safety and regulatory compliance. The subcontract falls under NAICS code 541690 and is issued by the Department of Defense under the CONTRACTATION & EQUIPMENT MRO SVC I contract vehicle, with responses due by July 29, 2026. The place of performance and specific location details are not provided, but the obligation extends to all sites where covered materials are present, requiring consistent and auditable processes across operations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract seeks consulting services focused on hazardous materials labeling, Safety Data Sheet management, and regulatory compliance specifically tailored to support defense manufacturing operations. The work is tied to the NAICS code 541690, indicating it falls under other scientific and technical consulting services, and is structured as a subcontract under the Department of Defense, with the contracting activity listed as Construction & Equipment MRO SVC I. Performance of the services is required at a designated location in New Cumberland, Pennsylvania, with the zip code 17070-5002 serving as the official place of performance. All deliverables must satisfy federal defense regulations surrounding the handling, documentation, and labeling of hazardous substances used in military production environments. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, indicating a narrow window for proposal submission. The contract does not specify a set-aside type, meaning it is open to all eligible contractors without preference for small businesses or other categories. There is no designated point of contact listed, and details on the contracting office’s physical address are incomplete. Interested parties must access the official portal via the provided DIBBS link to obtain full solicitation documents and submit compliant proposals. The scope demands expertise in navigating complex defense-related compliance frameworks and ensuring all hazardous material documentation aligns with current OSHA, DOT, and DoD standards.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

Hazardous Material Compliance & Safety Data ManagementThe contract titled Hazardous Material Compliance & Safety Data Management requires the identification, classification, and thorough documentation of hazardous materials in alignment with Department of Defense standards. Key deliverables include the authoring of Safety Data Sheets and the application of proper hazard labeling to ensure regulatory compliance across all applicable operations. The work is scoped for performance in Tracy, California, with a zip code of 95304-5000, and is structured as a subcontract under a Total Small Business Set-Aside, designated for firms certified by the Small Business Administration. The North American Industry Classification System code for this opportunity is 541690, indicating it falls under other scientific and technical consulting services. All proposals must be submitted by August 3, 2026, and the solicitation was posted on July 22, 2026, with bidding to be conducted through the DIBBS system. Compliance with DoD safety and documentation protocols is mandatory, and contractors must demonstrate expertise in hazardous materials management to meet stringent federal requirements.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract seeks services to ensure full compliance with hazard communication standards by preparing safety data sheets and labeling hazardous materials in alignment with OSHA and military regulations. The work must adhere to stringent federal and defense-specific requirements to safeguard personnel and maintain operational integrity across facilities under the Department of Defense. Performance is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This subcontract, classified under NAICS code 541690, is open for bidding with responses due by August 3, 2026. The solicitation was posted on July 22, 2026, and is managed under the Construction & Equipment MRO SVC I contract vehicle. All providers must demonstrate expertise in hazardous material documentation and labeling, with an understanding of both civilian regulatory frameworks and military compliance protocols. The contract emphasizes accurate, timely delivery of compliance services to support DOD operations and environmental safety standards.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

Military-Compliant Packaging, Labeling, and Hazard CommunicationThis contract requires the provision of certified packaging, hazard labeling, and Material Safety Data Sheet (MSDS) submission services to meet stringent compliance standards mandated by OSHA, MIL-STD, and the Defense Logistics Agency. All deliverables must align with federal military specifications to ensure safe handling, transportation, and storage of hazardous materials within Department of Defense supply chains. The work is to be performed at a military postal address in FPO with zip code 09587, and all documentation must adhere to DLA-specific formats and procedural requirements. The solicitation is a small business set-aside under the SBA program, specifically reserved for total small business concerns as defined by FAR 19.5, with a NAICS code of 541690 for other professional, scientific, and technical services. Interested parties must submit responses by the deadline of August 3, 2026, and the contract is structured as a subcontract under the Land Supply Chain division of the Department of Defense. Technical rigor, regulatory precision, and complete traceability in labeling and hazard communication are essential to meet performance expectations and avoid non-compliance penalties.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires full compliance with MIL-STD-2073-1E and MIL-STD-129 standards for the packaging and marking of capacitor units, including precise barcoding systems and appropriate hazardous materials labeling to meet federal military specifications. All work must be performed under a Small Business Set-Aside classification as defined by the SBA, ensuring eligibility and participation by qualified small businesses. The solicitation falls under NAICS code 541690 and is issued by the Department of Defense through the Maritime Supply Chain office, with a response deadline of August 6, 2026, and a posting date of July 22, 2026. The place of performance and point of contact details are not specified, but the contract is accessible through the DIBBS system for further information.

MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires comprehensive hazardous materials documentation and regulatory compliance support specifically for the packaging and handling of a shielding gasket, ensuring all applicable transportation, storage, and handling regulations are met. This includes the preparation and maintenance of Safety Data Sheets (SDS) that adhere to current global standards, as well as ongoing support to maintain compliance with federal and international hazardous materials regulations throughout the product lifecycle. The work is tied directly to the physical characteristics and chemical composition of the shielding gasket, necessitating precise technical understanding and accurate documentation to mitigate risk during logistics and use. This subcontract is issued under NAICS code 541690 for other scientific and technical consulting services and is managed by the ACTIVE DEVICES DIVISION within the Department of Defense. Performance is designated to occur at FPO, ZIP 96607, indicating military or operational locations may be involved. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, emphasizing a tight turnaround for qualified vendors. While no specific set-aside designation is listed, participation is expected from entities capable of delivering specialized hazardous materials expertise within the defense supply chain, likely requiring prior experience in defense-related compliance and documentation.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA and DFARS regulations for the labeling and documentation of hazardous materials associated with solenoid assemblies, ensuring all safety data sheets and physical labels meet federal standards for workplace safety and defense supply chain integrity. The work involves accurate identification, classification, and labeling of chemical hazards in accordance with OSHA’s hazard communication standard and DFARS requirements for defense contractors, with strict adherence to documentation protocols that support traceability and regulatory audits. This is a subcontract under NAICS code 541690, issued by the Department of Defense through the Maritime Supply Chain organization, with a response deadline of August 6, 2026. The place of performance and point of contact details are not specified, indicating the work may be performed at the subcontractor’s facility or as directed by the prime contractor. Compliance must be maintained throughout the lifecycle of the solenoid assemblies to satisfy defense procurement mandates and ensure uninterrupted supply chain operations.

MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Hazardous Materials Compliance and DocumentationThe contract titled Hazardous Materials Compliance and Documentation requires the preparation and ongoing maintenance of Safety Data Sheets for supplied hose or packaging products, ensuring full adherence to OSHA and federal hazardous materials regulations. All labeling associated with these materials must also meet current federal compliance standards to guarantee safe handling, storage, and transportation. The work is to be performed in San Diego, California, under the oversight of the Fluid Handling Division within the Department of Defense, with a response deadline of August 3, 2026. This is a subcontract opportunity classified under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental and safety compliance. Bidders must ensure their documentation processes are accurate, up to date, and fully aligned with regulatory requirements to support the Department of Defense’s operational safety protocols.

Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

Packaging, Marking, and Shipping ServicesThe contract requires the provision of comprehensive packaging, marking, and shipping services for nonmetallic hose designated for delivery to a naval vessel in San Diego, with strict adherence to MIL-STD-129 for labeling and MIL-STD-2073-1E for preservation standards to ensure long-term integrity and readiness. All materials must be traceable throughout the freight delivery process, ensuring full accountability from origin to final destination on the vessel. The work must be completed under the specifications of a subcontract agreement, with the North American Industry Classification System code 561910 indicating specialized support activities for transportation. The contract is managed by the Fluid Handling Division of the Department of Defense and is targeted for performance at the San Diego location with a zip code of 92113-3650. Responses are due by August 3, 2026, and the opportunity was posted on July 22, 2026, through the DIBBS platform.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Nonmetallic Hose SupplyThe contract calls for the supply of four units of nonmetallic hose identified by NSN 4720016987813, manufactured to meet all applicable military specifications, packaging, and shipping requirements. The item must comply with federal and defense standards for performance, durability, and material composition to ensure operational readiness in military environments. The solicitation is classified as a subcontract under NAICS code 326220, indicating the work falls within the rubber product manufacturing sector. The contract was posted on July 22, 2026, with a response deadline of August 3, 2026, and is managed by the Fluid Handling Division of the Department of Defense. Performance is required at a location in San Diego with ZIP code 92113-3650. The contract details are accessible through the DIBBS platform, and while no point of contact or set-aside designation is specified, all submissions must adhere strictly to military procurement protocols and delivery timelines to qualify for award.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Domestic and Traceable Freight Shipping (Non-Parcel Post)This contract requires the domestic shipment of defense-related items via palletized, non-parcel post freight services to Baltimore, Maryland, with strict adherence to Defense Logistics Agency and Wide Area WorkFlow compliance standards. All shipments must be fast, fully traceable, and structured to meet the Department of Defense’s logistical protocols, ensuring accountability and security throughout transit. The performance location is specifically designated as 21226-5000 in Baltimore, and the work must be conducted under the NAICS code 484220 for truck transportation, excluding parcel post and standard courier methods. The solicitation is classified as a subcontract with a response deadline of August 3, 2026, and was posted on July 22, 2026. The contracting entity is the Fluid Handling Division under the Department of Defense, which seeks qualified vendors capable of delivering time-sensitive defense materials under DLA and WAWF regulatory frameworks. While no set-aside designation is specified, vendors must be prepared to demonstrate full compliance with federal defense shipping standards, including documentation, tracking, and delivery verification, without reliance on conventional parcel services. All proposals must align with the technical and procedural requirements outlined in the DIBBS system under solicitation number SPE7M426T273Z.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract entails the packaging, labeling, and barcoding of defense-related items in full compliance with Department of Defense standards, specifically MIL-STD-2073-1E and MIL-STD-129, ensuring all materials meet military-grade requirements for storage, transport, and inventory management. The work must be performed at the designated place of performance in Baltimore, Maryland, with strict adherence to DLA protocols for documentation, traceability, and physical handling of sensitive defense equipment. This subcontract opportunity is open for responses until August 3, 2026, and falls under NAICS code 561910, aligning with other support services for military logistics and supply chain operations. All submissions must address technical specifications for labeling accuracy, barcode symbology, packaging materials, and environmental durability as mandated by federal defense standards.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Windshield Blade Set ManufacturingThe contract calls for the manufacture and delivery of 30 units of windshield blade sets that must fully comply with military specifications, including stringent packaging requirements and hazardous materials handling standards. These blade sets are intended for use in defense-related applications and must meet all performance, durability, and safety benchmarks dictated by military protocols. The work is to be performed under a subcontract arrangement, with the place of performance located in Baltimore, Maryland, and the acquiring agency is the Fluid Handling Division under the Department of Defense. All deliverables are subject to full compliance with applicable federal and military regulations, and nonconformity may result in rejection or penalties. The solicitation was posted on July 22, 2026, with a firm response deadline of August 3, 2026, leaving a narrow window for potential vendors to submit proposals. The NAICS code 336390 identifies the industry as Other Transportation Equipment Manufacturing, underscoring the specialized nature of the product. Interested parties must ensure their submissions address all technical, logistical, and regulatory components outlined in the requirements. The contract does not specify any set-aside provisions, meaning it is open to all qualified contractors regardless of size or status. Proposals must be submitted through the designated government portal for evaluation, and timely compliance with all deadlines and documentation standards is critical for consideration.

Other Motor Vehicle Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Pipe Reducers (NSN: 4730017233918)The contract requires the supply and delivery of six pipe reducers identified by NSN 4730017233918, manufactured and packaged in full compliance with military specifications for labeling, packaging, and hazardous materials handling. The items must be delivered to MCAS Cherry Point, North Carolina, with the zip code 28533-8051 as the specified place of performance. The solicitation falls under the NAICS code 332911, indicating it pertains to other fabricated metal product manufacturing, and is classified as a subcontract opportunity under the Department of Defense’s Fluid Handling Division. The posting date is July 22, 2026, with a response deadline of August 3, 2026, leaving potential vendors a limited window to submit proposals. All contractual obligations are tied to meeting federal defense standards for quality and logistical handling, with no set-aside provisions indicated.

Industrial Valve Manufacturing

POSTED

about 20 hours ago

DEADLINE

International Logistics and FOB Origin DeliveryThe contract pertains to the coordination of international shipments originating from abroad and delivered to South Korea under FOB Origin terms, meaning the seller’s responsibility ends once the goods are loaded at the point of origin, and all subsequent transportation, insurance, and import costs are borne by the buyer. Central to this agreement is the accurate preparation and management of all necessary export documentation to ensure compliance with international trade regulations and facilitate smooth customs clearance. The work falls under NAICS code 488510, which classifies it as support activities for air transportation, indicating a focus on specialized logistics coordination rather than direct carriage. The contracting entity is the Fluid Handling Division within the Department of Defense, underscoring the sensitive and mission-critical nature of the shipments involved. Subcontracting is the authorized procurement type, and the solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026. Although the specific origin location and destination city within South Korea are not detailed, performance is expected to span international borders with full accountability for export compliance. The absence of set-aside information suggests this opportunity is open to all eligible bidders regardless of business size or classification. No point of contact is listed, and the primary interface for submissions and inquiries is the DIBBS platform via the provided online link, indicating a fully electronic procurement process. Timing and documentation accuracy are critical, as delays or errors in export paperwork could disrupt defense-related supply chains.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance and DocumentationThe contract requires comprehensive identification, labeling, and documentation of hazardous materials to ensure full compliance with Hazard Communication standards and Defense Federal Acquisition Regulation Supplement requirements. All hazardous components must be accurately classified, properly labeled according to global harmonization systems, and supported by complete safety data sheets and accompanying documentation that align with federal defense protocols. The work must be performed in accordance with strict regulatory guidelines to guarantee safety, traceability, and operational readiness across all handling and logistical processes. This subcontract, under NAICS code 541690 and issued by the Fluid Handling Division of the Department of Defense, is open for responses until August 3, 2026. Performance is expected to support military operations and supply chain integrity, with no specific set-aside provisions indicated. The solicitation is accessible through the DIBBS platform, and participants must demonstrate proven experience in hazardous materials management as applied to defense contracting environments, ensuring all deliverables meet the highest standards of regulatory adherence and operational safety.

Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

Military-Compliant Labeling and MarkingThe contract pertains to the application of standardized military labeling and marking requirements in strict accordance with MIL-STD-129, ensuring all packages and containers are properly identified with barcodes, hazard warnings, and other mandated visual indicators. This work is critical for maintaining compliance with Department of Defense logistics and inventory protocols, facilitating seamless tracking, handling, and safety procedures across the supply chain. All labeling must meet exact specifications for legibility, durability, placement, and content to ensure operational readiness and regulatory adherence. The solicitation is issued as a subcontract under the NAICS code 561910, with a response deadline of August 3, 2026, and was posted on July 22, 2026. The requirement is managed by the Fluid Handling Division of the Department of Defense, and while specific performance location details are not provided, the work is expected to support defense logistics operations. The contract does not specify a set-aside status or point of contact, and all proposals must be submitted via the official DIBBS portal listed in the solicitation.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires adherence to MIL-STD-2073-1E for the packaging and preservation of goods to ensure environmental protection throughout shipment and storage, guaranteeing items remain safeguarded against moisture, corrosion, contamination, and physical damage under military logistics conditions. This subcontract is issued under the NAICS code 561910 and is managed by the Fluid Handling Division within the Department of Defense, with a response deadline of August 3, 2026, and a posting date of July 22, 2026. Compliance with the specified military standard is mandatory and must be executed without deviation to meet strict defense logistics requirements, though no specific place of performance or point of contact is provided in the available data.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Supply of Air Cap, Spray Gun (NSN 4940-00-236-4287)The contract entails the procurement and delivery of five military-grade air caps designed for spray guns, specifically compliant with the National Stock Number 4940-00-236-4287 and all applicable Department of Defense technical and quality requirements. These components are critical for precise fluid application in defense-related operations and must adhere to stringent performance and durability standards set by the Fluid Handling Division under the Department of Defense. The solicitation, issued as a subcontract on July 22, 2026, requires responses by August 3, 2026, with manufacturing and delivery governed by the NAICS code 332999 for other fabricated metal product manufacturing. The place of performance and point of contact details are not specified, indicating that performance may be flexible as long as all technical and delivery criteria are met. All bids must be submitted through the DIBBS platform via the provided link to ensure proper documentation and compliance with federal procurement protocols.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE