Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Handling and Compliance Support

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Hazardous Materials Handling and Compliance Support focuses on the safe management of regulated and potentially hazardous substances, including radioactive materials, with strict adherence to safety protocols, proper labeling, accurate documentation, and full regulatory compliance. A key component involves the implementation and maintenance of Safety Data Sheet (SDS) systems to ensure all personnel have timely access to critical information regarding material hazards, handling procedures, and emergency responses. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and falls under NAICS code 562910 for other remediation services. This is a subcontract opportunity issued by the Fluid Handling Division of the Department of Defense, with a response deadline set for August 17, 2026, and the solicitation was posted on August 4, 2026. The contractor must demonstrate expertise in handling sensitive materials within federal compliance frameworks and be prepared to support operations in high-safety-demand environments.

General Info

Hazardous materials handling at New Cumberland, PA, with SDS compliance, DOE subcontract, deadline August 17, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Safe handling, labeling, documentation, and compliance for potentially hazardous or regulated materials, including radioactive substances and SDS management.

Similar Contracts

Same NAICS industry code

902/903 Dorm Mold Remediation & Removal

Solicitation # 902/903 Dorm Mold Remediation and Removal

This contract involves mold remediation and removal services at two dormitory buildings—902 and 903—at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the complete remediation of mold-contaminated areas, including the removal and disposal of affected drywall, insulation, ceiling materials, and finishes, along with thorough cleaning, sanitization, and restoration to match existing conditions. All activities must comply with EPA guidelines and IICRC S520 standards, utilizing negative air pressure containment, HEPA filtration, and commercial-grade dehumidification equipment. Post-remediation verification, including air quality testing if necessary, must be documented and submitted. The work is to be performed within 60 consecutive business days after receipt of a Notice to Proceed, with a required site visit and signed attendance roster prior to bid submission. The contract type is a fixed-price, single lump sum, with an estimated value between $25,000 and $100,000. Bidders must submit a detailed cost breakout on company letterhead itemizing labor, materials, equipment, fees, bonds, subcontractor costs, overhead, and profit. A bid bond equal to 20% of the base bid is required if the bid is $25,000 or more, along with performance and payment bonds at 100% of the contract price, issued by an A-rated surety. Contractors must provide proof of insurance covering workers’ compensation, general liability, automobile, and professional liability, and must comply with federal wage requirements under the Construction Wage Rate Requirements and Executive Order 13658, submitting weekly certified payroll reports. Hazardous materials used must be accompanied by Safety Data Sheets, and all waste must be collected daily and removed off-site in accordance with environmental regulations. The project is subject to strict debarment and suspension disclosures under FAR 52.209-6, and subcontractors must self-certify their business category per NAICS code 562910. The contracting entity is Management & Training Corporation (MTC), acting on behalf of the U.S. Department of Labor, and the solicitation is set aside exclusively for small business concerns including small disadvantaged, women-owned, veteran-owned, and HUBZone small businesses. Proposals must be submitted via email by August 10, 2026 at 3:00 PM CST, and awards will be made based on

Earle C. Clements Job Corps Center

POSTED

about 8 hours ago

DEADLINE

Mold Remediation

Solicitation # mold-remediation

The contract seeks a licensed mold remediation contractor to perform remediation services at the Solo Parent Dormitory within the Flint Hills Job Corps Center in Manhattan, Kansas, specifically targeting rooms 208, 209, 210, 302, 310, and the 300 hallway linen closet. The work must adhere to the IICRC S520 Mold Remediation Standard, EPA guidelines, OSHA regulations, and Job Corps safety and facility standards, with all containment procedures requiring critical barriers and HEPA-filtered negative air machines. The contractor must remove contaminated porous materials such as drywall, insulation, and carpeting, clean and treat surfaces with EPA-registered antimicrobials, and bag and seal all waste for proper disposal. A comprehensive post-remediation verification process, including visual inspections, air and surface sampling, and a detailed written report with lab results and photographs, is mandatory for acceptance. The performance period is limited to 10 business days, and a one-year warranty on the remediation work is required. The solicitation is designated as a small business set-aside, open to SBA-certified categories including SB, SDB, WOSB, HUBZone SB, VOSB, and SDVOSB. Offerors must submit a complete proposal that includes a detailed pricing schedule with labor, material, and total costs, along with a W-9 form and DUNS number. Compliance with the Davis Bacon Act wage determinations is required, and contractors must provide a Certificate of Liability Insurance naming the Job Corps Center as both certificate holder and additional insured. Awards will be made to the offeror whose proposal is most advantageous based solely on price and price-related factors, with material compliance serving as a pass/fail gate—any non-compliance results in disqualification. Upon award, the contractor must submit SF-1413 and, if the contract exceeds $30,000, Serrato Form 542. The deadline for proposal submission is August 13, 2026, at 4:00 PM CST.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 8 hours ago

DEADLINE

Erosion and Sediment Control InstallationThe contract outlines the installation of erosion and sediment control measures including silt fences, fiber rolls, erosion control blankets, and temporary seeding to manage runoff during and after construction activities. These measures are critical for preventing soil displacement and protecting nearby waterways from sedimentation, ensuring compliance with environmental regulations throughout the project lifecycle. The work is scoped to support infrastructure development under the oversight of the Texas Department of Transportation, with performance expected across unspecified locations within the state. Subcontractors must submit bids by September 2, 2026, under the NAICS code 562910 for other waste management services, indicating the environmental remediation focus of the task. The solicitation is not designated for any specific set-aside program and is posted via the Texas SmartBuy portal, reflecting a state-level procurement process requiring vendors to meet technical and regulatory standards for erosion control. All work must be completed in alignment with Texas transportation and environmental guidelines, and participation requires demonstrated experience in implementing approved sediment control practices at construction sites.

Texas Department of Transportation

POSTED

about 8 hours ago

DEADLINE

Asbestos Abatement and Hazardous Material RemovalThe contract involves the safe removal, containment, and disposal of asbestos-containing flooring materials across four designated cabins, requiring full compliance with federal, state, and local environmental and health regulations. The work must be executed with stringent safety protocols to prevent asbestos fiber release, including proper containment procedures, use of approved personal protective equipment, and adherence to decontamination standards for personnel and equipment. All materials contaminated with asbestos must be handled, labeled, transported, and disposed of in licensed facilities certified for hazardous waste management. The solicitation, titled Asbestos Abatement and Hazardous Material Removal, is issued as a subcontract under NAICS code 562910 for hazardous waste collection and treatment services, and is managed by the Department of Land & Natural Resources in Hawaii. The opportunity was posted on August 4, 2026, with a response deadline of August 25, 2026, at 2:00 AM. Although no specific location details are provided beyond the state designation, performance is expected to occur within Hawaii, and bidders must ensure familiarity with state-specific asbestos regulations. The contract does not specify set-aside status, and no point of contact information is listed, leaving potential respondents to refer to the provided public link for additional details.

Department of Land & Natural Resources

POSTED

DEADLINE

MIL DEPT - Environmental Services

Solicitation # 74023

Contractors are invited to bid on the Environmental Services contract for the Vermont Military Department, covering multiple locations across the state. Proposals must be submitted by 9:00 a.m. on August 24, 2026, and any questions must be submitted in writing via email to the designated contact no later than 4:00 p.m. on August 13, 2026. While efforts will be made to address inquiries during the proposal period, contractors are expected to ensure their submissions fully comply with the RFP requirements, as deviations, including alternate methods or conditions not explicitly outlined in the RFP or its addenda, will result in a non-responsive bid. The contract is managed under solicitation number 74023, issued by the Vermont Department of Economic Development, with all performance occurring within the state of Vermont. The primary point of contact for inquiries is Lynn Metcalf, reachable via email or phone. The official bid details and submission portal are accessible through the Vermont Business Registry.

Department of Economic Development

POSTED

DEADLINE

Hazardous Material Compliance & PackagingThe contract requires strict adherence to hazardous material handling protocols for capacitors, mandating accurate labeling, secure packaging, and comprehensive documentation to meet both OSHA and military standards. All compliance activities must ensure the safe identification and transport of hazardous components, with no room for deviation from established regulatory frameworks. The work is performed under a subcontract arrangement tied to the Department of Defense, specifically managed by the MARITIME SUPPLY CHAIN ESOC BUYS entity, with performance obligations centered in Norfolk, Virginia, at the ZIP code 23511-4397. Responses to this solicitation must be submitted by August 17, 2026, and the procurement falls under NAICS code 562910, indicating it relates to hazardous waste collection and treatment services. There is no set-aside designation specified, meaning all eligible contractors may compete. The posting date is August 4, 2026, suggesting a brief but critical window for qualified vendors to prepare and submit their proposals. Failure to meet the specified compliance requirements could result in rejection or non-performance penalties, making precision in labeling and documentation non-negotiable elements of fulfillment.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling Services

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Handling and ComplianceThe contract titled Hazardous Materials Handling and Compliance requires the identification, documentation, and safe management of hazardous materials utilized in production or packaging processes. It mandates strict adherence to safety protocols including the proper maintenance and accessibility of Safety Data Sheets and accurate hazard labeling in compliance with regulatory standards. All activities must ensure the protection of personnel, facilities, and the environment throughout the handling, storage, and disposal of regulated substances. This is a subcontract issued under the NAICS code 562910 by the Department of Defense through the Maritime Supply Chain office, with a response deadline of August 19, 2026, and a posting date of August 4, 2026. The place of performance and specific location details are not specified, and no set aside provisions are indicated. The contract underscores the critical need for regulatory compliance and operational safety in the handling of hazardous materials within defense-related supply chain activities.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Handling & Labeling Services

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Hazardous and Radioactive Materials Compliance & PackagingThe contract requires comprehensive packaging, labeling, and documentation services for shipments involving hazardous or radioactive materials, ensuring full adherence to federal and military regulatory standards. This includes the preparation of Safety Data Sheets and all necessary compliance documentation to meet stringent transportation and handling requirements. The work is subject to strict oversight to guarantee the safety, accuracy, and legal compliance of all material movements. This is a subcontract opportunity set aside exclusively for Women-Owned Small Businesses under NAICS code 562910, with a response deadline of August 19, 2026. The solicitation is managed by the Strategic Acquisition Program Directorate under the Department of Defense, though specific location details for performance or point of contact are not provided. All proposals must align with the technical and regulatory expectations outlined for handling sensitive materials, with emphasis on precision in labeling, documentation integrity, and regulatory conformity.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Packaging and LabelingThe contract requires specialized packaging, labeling, and documentation for hazardous components included in a parts kit, adhering strictly to military and OSHA safety standards. All work must ensure compliance with regulatory requirements for the handling, transport, and storage of hazardous materials, with an emphasis on accuracy, durability, and traceability across the supply chain. The deliverables are critical to safeguarding personnel, equipment, and the environment during military logistics operations. Submitted as a subcontract, the opportunity is issued by the Defense Logistics Agency under the Department of Defense and is classified under NAICS code 562910 for waste collection and treatment services, reflecting its focus on hazardous materials management. Responses are due by August 11, 2026, with the solicitation posted on August 4, 2026. The place of performance and point of contact details are unspecified, but the work will support defense-related logistics and must be executed in alignment with federal hazardous materials regulations. All contractors must demonstrate proven expertise in compliant hazardous material packaging and documentation before bid submission.

Defense Logistics Agency

POSTED

DEADLINE

Abatement and Hazardous Materials ManagementThe contract titled Abatement and Hazardous Materials Management requires the assessment and removal of hazardous substances including asbestos and lead, with a specific requirement to certify the absence of asbestos-containing materials. This subcontract is issued by the University of Texas Health Science Center at Tyler under NAICS code 562910, which classifies it under Environmental Remediation Services. The solicitation was posted on August 4, 2026, with a response deadline set for September 3, 2026, at 9:00 PM. All work must be performed in accordance with applicable federal, state, and local regulations governing hazardous material handling and abatement. Certification verifying no ACM presence is mandatory and must be documented and submitted as part of deliverables. The place of performance is within the state of Texas, though specific location details are not provided. Proposals must be submitted through the specified portal at txsmartbuy.gov, and contractors are expected to possess appropriate licenses, training, and experience in hazardous materials abatement.

University of Texas Health Science Center at Tyler

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Domestic Manufacturer of Military Interconnecting BoxesThe contract calls for the domestic manufacture and supply of interconnecting boxes that meet strict military specifications, with full adherence to the Berry Amendment and Buy American Act requirements, ensuring all materials and processing originate entirely within the United States. The products are intended for use by the Department of Defense’s Fluid Handling Division and must be delivered to the specified place of performance in Norfolk, Virginia, with a zip code of 23511-2701. The solicitation is structured as a subcontract opportunity under NAICS code 334290, which corresponds to Other Electrical Equipment and Component Manufacturing, indicating the technical nature of the components involved. Interested vendors must submit their responses by the deadline of August 17, 2026, with the solicitation posted on August 5, 2026. There is no designated set-aside for small businesses or other categories, meaning all qualified domestic manufacturers may compete. The contract emphasizes complete compliance with federal domestic sourcing mandates, requiring rigorous documentation and verification of origin for all materials and labor. All work must be performed in the United States, and the final products must be certified as meeting military standards without exception. The solicitation details can be accessed online through the DIBBS portal using the provided reference number.

Other Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Interconnecting Box (NSN: 5975015621270)The contract entails the procurement and delivery of six military-specification interconnecting boxes designated by NSN 5975015621270, to be delivered in full compliance with Defense Logistics Agency standards. Each unit must adhere to strict requirements for marking, hazardous materials disclosure, and cybersecurity protocols for covered defense information, ensuring both operational integrity and regulatory compliance. The delivery location is specified as Norfolk, Virginia, with the zip code 23511-2701, and the procurement is being managed by the Fluid Handling Division under the Department of Defense. Submitted responses are due by August 17, 2026, with the solicitation posted on August 5, 2026, under a subcontract structure classified under NAICS code 334290, which pertains to other electronic component manufacturing. Although no set-aside criteria or point of contact are provided, the requirement remains strictly for defense-related hardware meeting federal specifications. The full details and submission instructions are accessible via the DIBBS platform using the provided link.

Other Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Logistics and Transportation (First Destination Transportation - FDT)The contract pertains to FOB Origin freight services under the Department of Defense’s Government-Arranged Transportation program, specifically the First Destination Transportation initiative, requiring full compliance with DPAS ratings and integration of VSM systems. Providers must handle all logistics from origin point, including proper packaging, coordination of transportation, and adherence to federal regulations governing defense supply chain operations. Performance is centered at Tracy, California, with the NAICS code 484220 indicating specialized freight transportation services, and the subcontract structure implies participation by secondary vendors under a prime contractor’s oversight. The solicitation is open until August 17, 2026, with an issuance date of August 5, 2026, and falls under the Fluid Handling Division of the Department of Defense. All offerors must ensure seamless execution of transport duties from origin to first destination while maintaining stringent compliance with government-mandated logistics protocols. The contract emphasizes reliability, regulatory alignment, and operational integration within the defense supply network, with no indicated set-aside status, leaving it open to qualified suppliers regardless of small business designation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 7 hours ago

DEADLINE

Domestic Steel Raw Material SupplyThe contract calls for the supply of domestically produced steel bar stock or forged blanks compliant with ASTM A105 specifications, intended for machining into high-pressure pipe elbows. The material must meet stringent quality and performance standards to ensure suitability for high-pressure applications within critical fluid handling systems. All供货 must originate from within the United States to satisfy domestic production requirements, and suppliers are expected to demonstrate capability in consistent production, material traceability, and adherence to ASTM A105 chemical and mechanical property requirements. The solicitation is categorized as a subcontract under NAICS code 331110, which corresponds to iron and steel mill and ferroalloy manufacturing. Responses are due by August 17, 2026, with the opportunity posted on August 5, 2026. Performance of the contract will be centered at Tracy, California, with a zip code of 95304-5000, indicating likely delivery or staging points near this location. The awarding organization is the Fluid Handling Division under the Department of Defense, underscoring the critical nature of the components in military or defense-related infrastructure. While no set-aside type is specified, the emphasis on domestic production aligns with broader federal priorities for sourcing critical materials within the United States.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 7 hours ago

DEADLINE

Cadmium Plating and Surface Finishing ServicesThe contract calls for cadmium plating of steel pipe elbows, encompassing all necessary surface preparation steps including pre-treatment, electroplating with cadmium, passivation to enhance durability, and rigorous quality testing to ensure compliance with military corrosion resistance standards. All work must adhere strictly to specifications governing material integrity, coating thickness, adhesion, and performance under environmental stress conditions, ensuring the finished components meet the demanding requirements of defense applications. The production is to be performed at a designated facility in Tracy, California, with a zip code of 95304-5000, and the work is classified as a subcontract under the NAICS code 332812 for metal coating services. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is managed by the Fluid Handling Division under the Department of Defense. While no set-aside status or point of contact is specified, the procurement is issued through the Defense Logistics Agency’s DIBBS platform, indicating formal federal procurement procedures and a requirement for bidders to comply with all applicable military and industrial standards. The emphasis on cadmium plating implies a critical application where corrosion resistance is vital to operational reliability, and contractors must demonstrate proven capability in meeting the exacting technical and compliance thresholds for defense-grade surface finishes.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 7 hours ago

DEADLINE

Precision Steel Forging and Machining of Pipe ElbowsThe contract calls for the precision manufacture of 90-degree steel street elbow fittings featuring female NPT to male NPT threads, rated for a 3000 PSI working pressure, with all fabrication processes including CNC machining, threading, and comprehensive inspection to meet ASME and military specifications. The fittings must be produced using high-grade steel materials and adhere strictly to dimensional tolerances and surface finish requirements dictated by industry and defense standards to ensure reliability in high-pressure fluid handling applications. Each component is subject to rigorous quality control procedures throughout production, including material certification, dimensional verification, and pressure testing to validate performance under operational conditions. The work is to be performed at a designated location in Tracy, California, with a final delivery deadline aligned to the response deadline of August 17, 2026. This subcontract solicitation, issued by the Department of Defense’s Fluid Handling Division, is classified under NAICS code 332994 for Other Metal Heat Treating and Related Activities, indicating a focus on specialized fabrication and finishing. While no specific set-aside status is assigned, the requirement targets qualified subcontractors with proven experience in military-grade metalworking, advanced machining capabilities, and documented compliance with federal procurement standards for defense-related components.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 7 hours ago

DEADLINE

ELBOW, PIPE TO TUBE

Solicitation # SPE7M3-26-T-7852

The contract is for the procurement of 169 units of an elbow fitting designed to connect pipe to tube, identified by NSN 4730-00-090-8665 and part number MS51813-3, manufactured in compliance with MIL-DTL-18866K and MS51813G specifications. The item must adhere to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with procurement governed by full and open competition. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Delivery is required within 154 days from the contract award, with the product to be shipped FOB origin and subjected to inspection and acceptance at the destination. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines, with no special marking required and palletization aligned with DLA packaging standards. The unit of issue is each, with a fixed quantity and zero variance allowed, priced at $169.00 per unit for a total contract value of $28,561. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery deadline of January 5, 2027. Transportation details follow DLA Procurement Notes C19 and C20, and all correspondence must reference the solicitation number SPE7M3-26-T-7852.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-26-T-300Q

This contract is for a single nonmetallic hose assembly, part number P206TC0639080808-13, manufactured by Parker-Hannifin Corporation, with NSN 4720017315766. The item is classified as a restricted source requiring government engineering approval and prohibits the use of Class I ozone-depleting chemicals, with all substitutes subject to prior approval regardless of specification allowances. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking in accordance with MIL-STD-129 and palletization per RP001. The delivery is FOB origin with a strict 10-day lead time, zero variance in quantity, and inspection and acceptance occurring at the destination. The sole delivery address is the U.S. Army unit at Fort Riley, Kansas, with a required delivery date of August 3, 2026. Transportation directives follow DLA Procurement Notes C19 and C20, and the item is identified under solicitation SPE7M4-26-T-300Q, issued under NAICS code 326220 by the Department of Defense’s Fluid Handling Division. The contract is subject to technical and quality requirements from the DLA Master List, with the controlling revision tied to the solicitation issue date.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-7847

The contract is for a single reducer hose component with NSN 4730-01-652-2628, solicited under SPE7M3-26-T-7847 by the Department of Defense’s Fluid Handling Division. The item must be delivered within 10 days of award, and responses are due by August 17, 2026. The vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization to qualify. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure to foreign persons inside or outside the United States without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to handle such data. The point of contact for inquiries is William Cain, reachable via email and phone provided in the contract details.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7M4-26-T-300T

This contract specifies the procurement of a nonmetallic hose assembly with NSN 0001S00000053, totaling 15 units to be delivered within 286 days after order. The solicitation is issued under number SPE7M4-26-T-300T with a response deadline of August 17, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 332912. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Packaging, identification, configuration management, and export control directives are strictly enforced, including compliance with ITAR or EAR regulations for technical data, which restricts access to foreign persons unless authorized. Only DLA contractors approved under the US/Canada Joint Certification Program, having completed mandatory training and documentation, may handle such controlled data. The item must be marked per physical identification requirements, and non-accepted supplies must be stripped of government identification. Inspection and acceptance are to occur at the origin, and the place of performance is located in New Cumberland, Pennsylvania, with a primary point of contact at Blake Tushar of the Fluid Handling Division under the Department of Defense.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-26-T-300U

Offerors must comply with strict requirements for this solicitation, including the prohibition of covered telecommunications equipment or services under FAR 52.204-24 and DFARS 252.204-7016, ensuring no equipment or services from restricted foreign sources are used in performance. Domestic material restrictions under the Berry Amendment and Buy American Act apply, with the Berry Amendment threshold lowered to $150,000, requiring detailed disclosure of any non-domestic materials and strict adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. Small business joint ventures must submit specific representations for eligible categories including small business, service-disabled veteran-owned, WOSB, EDWOSB, and HUBZone. Vendors are strongly encouraged to quote quantity ranges due to fluctuating demand, as this allows buyers to consolidate or adjust requirements without administrative delays, though this does not apply to Auto IDC. Proposals including items produced via additive manufacturing are ineligible for award unless prior written approval is granted. Vendors must register through the new AMPS system within two months to retain access to the Vendor Shipment Module, with those using VSM WebServices required to update their internal schema to avoid disrupted shipping. All offers must be submitted via DIBBS, and if unable to quote by the closing date, a “No Bid” submission with anticipated date or reason is mandatory to avoid misinterpretation of non-responsiveness. Fast Pay is not applicable. The item under solicitation is a hose assembly with NSN 4720-01-625-6296, quantity 16 units, with a 140-day delivery requirement, and the point of contact is Blake Tushar.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

PLUG, MACHINE THREAD

Solicitation # SPE7M3-26-T-7849

The contract is for one unit of a machine thread plug identified by NSN 4730-01-696-9906 under solicitation SPE7M3-26-T-7849, with a response deadline of August 17, 2026 and a delivery requirement of 20 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by whether the acquisition is simplified or large, and whether any solicitation amendments have been issued. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is subject to strict prohibitions against Class I ozone-depleting chemicals, which override any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Tailored higher-level contract quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance may occur at the origin. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, including foreign nationals working for U.S. entities, and requires prior authorization from the Department of State or Commerce. Access to the controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed the required DOD training and questionnaire and have received DLA approval. The place of performance is Mechanicsburg, Pennsylvania, 17050-2411, and the point of contact is William Cain of the Fluid Handling Division within the Department of Defense.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE