Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Materials Packaging and Compliance

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910
New
Theatre Mold Remediation Scope of Work
Solicitation # AT25-0006
Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was initiated following a sprinkler system failure that caused significant water damage. The scope of work requires the remediation of the entire building, including cleaning visible mold from CMU walls, concrete floors, and vinyl tiles, as well as the removal and replacement of affected drywall, gypsum wallboard, and acoustical tile ceiling finishes. Additionally, the contractor must clean or replace damaged theater seating cushions and perform dehumidification to maintain humidity levels at or below 50 percent. All work must adhere to ANSI/IICRC S520 standards, EPA guidelines, OSHA regulations, and the findings of the Micro Air Inc. Mold Testing report dated April 11, 2024. The contract is a single lump sum award based on best value, with evaluation weights distributed across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Key requirements include the provision of a Certified Industrial Hygienist for verification and final clearance, a detailed remediation plan featuring HEPA filtration and negative air pressure, and compliance with Davis-Bacon Act wage determinations. Bidders must hold a valid Indiana Contractor's License and provide proof of automobile and workers compensation insurance, naming Adams and Associates, Inc. as an additional insured. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a timeline for substantial completion, and a 90-day bid guarantee. Work must commence within 14 days of the Notice to Proceed, and payment is issued on Net 30 terms.
Atterbury Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 11 days
NAICS: 562910
New
SLED
MPE Three Classroom Mold Abatement - Rooms 22, 23, 24
Solicitation # 01 (2026-2027)
The Montebello Unified School District is soliciting bids under RFQ No. 01 (2026-2027) for mold abatement services in three classrooms, specifically Rooms 22, 23, and 24 at MPE in Montebello, California. The scope of work includes the abatement process, cleaning of A/C systems, and the movement of furniture before and after the project. Contractors must utilize containment, three-stage decors, and negative air pressure, while maintaining CAL/OSHA safety standards and good housekeeping. All work will be monitored by a third-party consultant, and the contractor is responsible for any necessary re-cleaning if good clearances are not achieved. Regulated disposal must be accompanied by a manifest, and proper mold signage and yellow caution flagging are required on-site. Bids must be submitted by November 2, 2026, at 9:00 a.m. via the designated secure portal. The contract will be awarded to the best value bidder based on price, proven ability to comply with specifications, capability, and credibility, with a preference for local firms in the event of equal low bids. Requirements for submission include a Non-Collusion Affidavit and a Certificate of Workers' Compensation Insurance. The successful vendor must provide a minimum one-year warranty and maintain comprehensive insurance naming the District as an additional insured. Payment is due 30 days after the receipt of a correct invoice or acceptance of goods. The District reserves the right to terminate the agreement with 30 days' written notice or immediately upon failure to perform.
Montebello Unified School District

POSTED

about 21 hours ago

DEADLINE

in 4 days

AI Contract Overview

Show more

The contract requires comprehensive packaging, labeling, and documentation of hazardous materials in strict compliance with FED-STD-313, TQ IP025, and OSHA HazCom standards, ensuring all hazardous substances are properly identified and handled according to federal and defense-specific regulations. This includes the accurate preparation of Safety Data Sheets and hazard warning labels that meet the mandatory requirements for clarity, legibility, and content, with all deliverables subject to rigorous quality control to maintain compliance across the supply chain. The work is tied to a subcontract under the Department of Defense’s Active Devices Division, with performance exclusively located at Tracy, California, 95304-5000, and falls under NAICS code 562910 for waste treatment and disposal services. Bidders must submit proposals by August 10, 2026, after the solicitation was posted on July 30, 2026, and the opportunity is not subject to any set-aside provisions. All parties involved must demonstrate proven expertise in managing hazardous materials under federal and military standards, with a focus on precision in labeling and documentation to ensure safety and regulatory adherence. The contract is accessible through the DIBBS platform, and while no point of contact is listed, potential responders are expected to navigate the online portal for further details and submission requirements specific to this defense-related subcontract.

General Info

Packaging, labeling, and documentation of hazardous materials per federal and defense standards at Tracy, California, under DoD subcontract.

NAICS

562910 - Remediation Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-26-T-363C.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTACT, ELECTRICAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Packaging, labeling, and documentation of hazardous materials per FED-STD-313, TQ IP025, and OSHA HazCom standards, including SDS and hazard warning label preparation.

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334413
New
DIBBS
MICROCIRCUIT, MEMORY
Solicitation # SPE7M5-26-T-458G
This small business set-aside solicitation, issued by the DLA Land and Maritime Active Devices Division, is for the procurement of two units of Microcircuit Memory, NSN 5962015083931. The requirement specifies a delivery timeframe of 154 days after order, with inspection and acceptance occurring at the destination. The procurement is governed by NAICS code 334413 and mandates strict adherence to supply chain traceability and quality standards. Specifically, contractors must submit a completed DLA Land and Maritime Form 918 along with unredacted traceability documentation or test reports for approval at least 15 days prior to the delivery date; shipment is prohibited until written authorization is received from the contract administrator. Technical requirements include strict packaging and marking standards to prevent damage and ensure authenticity. Items must be packaged according to MIL-STD-2073-1E and MIL-STD-129, with mandatory DOD-qualified ESD and EMI protective materials per MIL-PRF-81705 and specific cushioning requirements under A-A-59136. Additionally, unit packs must be marked for lead finish attributes in accordance with IPC/JEDEC J-STD-609. The contract also incorporates critical security and safety mandates, including CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and a prohibition on the intentional addition of mercury. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Semiconductor and Related Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M5-26-T-436C
Solicitation SPE7M5-26-T-436C is a small business set-aside request for quotations issued by the DLA Land and Maritime Active Devices Division for the procurement of 10 electromagnetic relays. The items are identified by NSN 5945005478738 and part number MS24184-D1, and are designated as critical application items. The hardware must comply with basic specification MS24184T Revision T and reference specification MIL-PRF-6106R(1) SUP 1A Revision R. Delivery is required within 104 days after order, with a need ship date of August 18, 2026, and an original required delivery date of October 19, 2026. The destination for delivery is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-2073-1E, with marking performed according to MIL-STD-129 and specific lead finish markings per IPC/JEDEC J-STD-609. Environmental restrictions prohibit the intentional addition of mercury and the use of Class I ozone-depleting substances without written approval. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. Inspection and acceptance are to be conducted at the destination.
Relay and Industrial Control Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS