Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Packaging and Shipping Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract awards services for the packaging, labeling, and transportation of hazardous battery shipments in strict compliance with Defense Logistics Agency, Department of Transportation, and military standards. The work falls under NAICS code 493190 and is structured as a subcontract, ensuring all hazardous materials handling adheres to federal safety and regulatory protocols for defense-related logistics. Performance is expected to meet rigorous military specifications, with full accountability for proper classification, containment, documentation, and transit of hazardous batteries to designated military destinations. The solicitation was posted on August 7, 2026, under the Defense Logistics Agency within the Department of Defense, indicating the scope is tied to critical defense supply chain operations. Though specific delivery locations and points of contact are not detailed, the obligation to comply with DLA and DOT regulations implies the contractor must maintain certified hazard communication practices, use approved packaging materials, and ensure real-time tracking and reporting throughout transit. All activities must align with military logistics protocols to support operational readiness and safety across the defense infrastructure.

General Info

Packaging, labeling, and transporting hazardous battery shipments per DLA, DOT, and military standards for defense logistics.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Packaging, labeling, and transportation of a hazardous battery shipment compliant with DLA, DOT, and military standards.

Similar Contracts

Same NAICS industry code

Packaging, Labeling & Logistics CoordinationThe contract requires full compliance with MIL-STD-129 standards for the packaging and labeling of recessed washers, ensuring all materials are properly marked, barcoded, and documented for military logistics. Packaging must adhere to RP001 guidelines for palletization, and all shipments must be coordinated through the Vendor Shipment Module (C20) to ensure accurate tracking and integration with defense supply systems. The work involves end-to-end logistics preparation, from initial packaging through final outbound shipment, with strict adherence to military specification requirements to support seamless receipt and inventory management. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with a NAICS code of 493190 indicating warehousing and storage services. The solicitation was posted on August 7, 2026, with proposals due by August 21, 2026. Place of performance and point of contact details are not specified, but all activities must align with federal defense logistics protocols. The successful contractor will be responsible for maintaining compliance throughout the supply chain, ensuring every unit is properly identified, palletized, and shipped via the designated C20 system to meet military delivery expectations.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Secure Logistics & Packaging for Military ShipmentsThe contract requires the packaging, preservation, and preparation of maintenance kits in strict accordance with MIL-STD-2073-1E standards, ensuring all items are properly labeled, cushioned, and secured for transport. The work must support FOB origin delivery, meaning the contractor is responsible for all handling and packaging until the goods are loaded onto the initial carrier at the designated origin point. Every step of the process—from internal cushioning to external labeling—must meet exacting military requirements to guarantee durability, traceability, and integrity during transit under demanding conditions. This subcontract, issued under NAICS code 493190, is managed by the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT program, with performance centered at the New Cumberland, Pennsylvania location, ZIP code 17070-5002. The solicitation was posted on August 7, 2026, and proposals must be submitted no later than August 14, 2026. Contractors must demonstrate capability to comply fully with military packaging regulations, handle secure logistics, and ensure readiness for immediate operational deployment, with all work geared toward supporting the readiness and sustainment of defense equipment systems.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Packaging, Palletization, and MIL-STD-129 LabelingThis contract requires the final packaging, palletization, and labeling of engine stay assemblies in full compliance with DLA RP001 and MIL-STD-129 standards, ensuring proper barcoding and containerization for FOB Destination shipment. The work must adhere strictly to military packaging and labeling protocols to guarantee seamless handling, tracking, and delivery throughout the supply chain. The solicitation is a subcontract under a Total Small Business Set-Aside, designated for small businesses pursuant to SBA regulations and FAR 19.5, with the NAICS code 493190 indicating warehousing and storage services. It was posted on August 7, 2026, and responses are due by September 8, 2026. The contracting activity falls under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance location not specified. All work must align with federal military logistics standards to support defense supply chain requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Packaging, Labeling, and Distribution Services

Defense Logistics Agency

POSTED

DEADLINE

General Office Supplies Consolidation & FulfillmentThe contract titled General Office Supplies Consolidation & Fulfillment is a subcontract issued by the Defense Logistics Agency under the Department of Defense to aggregate, kit, and deliver a wide range of office supply items according to specific delivery orders. It operates under a CLIN structure to streamline fulfillment, ensuring multiple items are bundled and dispatched efficiently in alignment with operational requirements. The work is governed by NAICS code 493190, which classifies it under other warehousing and storage services, reflecting its focus on logistics coordination rather than direct manufacturing or retail. The contract was posted on August 7, 2026, and is designed to support federal supply chain needs through consolidated fulfillment, reducing fragmentation in procurement and delivery. While no specific place of performance or point of contact is provided, the contract is accessible via a DIBBS portal link, indicating its integration into the DoD’s procurement and logistics infrastructure. The absence of a set-aside designation suggests this is an open competition, and the structure implies scalability to accommodate varying order volumes across multiple delivery timelines, ensuring consistent supply chain support for government operations.

Defense Logistics Agency

POSTED

DEADLINE

Military-Compliant Packaging and Palletization

Defense Logistics Agency

POSTED

DEADLINE

Logistics & Order Fulfillment Services

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Palletization, and Marking ServicesThe contract requires the provision of packaging, palletization, and marking services for gasket shipments in full compliance with Department of Defense standards and specific directives from the Defense Logistics Agency. All work must adhere to military-grade requirements for handling, securing, and labeling materials to ensure proper identification, transportability, and readiness for military logistics systems. The packaging and marking must meet exacting specifications for durability, clarity, and compliance with federal and defense regulations to facilitate seamless integration into the DoD supply chain. This is a subcontract opportunity under NAICS code 493190, with performance required at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation was posted on August 7, 2026, and responses are due by August 17, 2026. The contracting organization is the Department of Defense, specifically under Land Supplier Operations Vehicle Support, and all deliverables must be completed and ready for shipment prior to the specified deadline. Contractors are expected to demonstrate proven capability in meeting stringent defense packaging and marking protocols without deviation.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

MIL-STD-129 Packaging, Preservation & Container Labeling

Defense Logistics Agency

POSTED

DEADLINE

International Packaging and Marking ComplianceThe contract requires full compliance with Defense Logistics Agency packaging and marking standards, specifically adhering to DLA Proc Notes C19 and C20 along with the implied requirements of MIL-STD-2073. This includes the application of proper preservation methods to safeguard materials during transit, accurate labeling with Transportation Control Numbers, Batch Batch Parameters, contract identifiers, and complete destination information to ensure traceability and logistics accuracy. All packaging and marking activities must be executed to meet federal defense logistics directives without exception. The work is classified as a subcontract under NAICS code 493190, indicating a focus on other support activities for transportation, and is issued under the Department of Defense through the Defense Logistics Agency. The contract was posted on August 7, 2026, and is associated with the specific award identifier SPE7LX26FB4S5, with performance obligations tied to the broader contract SPE7LX21D0081. No geographical details are specified for performance or oversight, suggesting the work may occur at multiple locations managed under DLA's global logistics framework.

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Marking, and Labeling ServicesThe contract entails the military-compliant packaging, labeling, and barcoding of hose assemblies in strict adherence to Defense Logistics Agency standards and MIL-STD-2073 guidelines, ensuring all items meet federal military specifications for handling, storage, and transportation. This includes the accurate application of hazardous material markings to comply with safety and regulatory protocols, guaranteeing that each assembly is properly identified and secured for operational use. The work is structured as a subcontract under the NAICS code 493190, with the Department of Defense’s Defense Logistics Agency as the overseeing organization, and performance is expected to fulfill the logistical and technical demands of military supply chains without geographic restriction.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires strict adherence to federal and military standards for the proper packaging, labeling, and documentation of hazardous materials shipments, ensuring safety and regulatory compliance throughout the transportation process. This subcontract is issued under the Defense Logistics Agency, part of the Department of Defense, and falls under NAICS code 493190, which pertains to other supporting activities for transportation. All work must meet rigorous operational and safety protocols established by military directives and federal hazardous materials regulations, with no flexibility in documentation or handling procedures. The solicitation was posted on August 7, 2026, with a firm response deadline of August 17, 2026, leaving a narrow window for prospective contractors to submit proposals. The place of performance is not specified, indicating that services may be required at multiple locations tied to military logistics operations. While no set-aside type is designated, the nature of the work demands specialized expertise in hazardous material handling, and contractors must demonstrate proven experience with Defense Department compliance requirements. All submissions must align precisely with the technical and administrative expectations outlined in the full solicitation available through the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

DECK BOX OPERATOR, V

Solicitation # SPE7MC-26-T-186P

The contract is for the procurement of one unit of Deck Box Operator, V, identified by NSN 4820-01-521-1101, under solicitation SPE7MC-26-T-186P, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96632 aboard the USS THEODORE ROOSEVELT CVN 71, with terms FOB destination and zero variance allowed in quantity. The item must be packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, using DLA-approved packaging procedures and codes, including unit container D3 and pack code U. The shipment must avoid parcel post and instead be dispatched by the fastest traceable means with DLA Vendor Shipment Method (VSM) and RDD 777 designation. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as specialized instruments or sensors as defined by NAVSEA, and any exempted fluorescent lamps or instruments must include a secondary containment and be shock-proof per NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The item shall be inspected and accepted at the delivery point, and special marking is not required. The contract is classified under NAICS 332911 and was posted on August 9, 2026, with responses due by August 20, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

AIR CONDITIONER

Solicitation # SPE8E8-26-T-5113

The contract pertains to the procurement of six air conditioners, identified by NSN 4120016491002 and part number 38203-0666 from AIRXCEL, INC., under solicitation SPE8E8-26-T-5113. Delivery is required within 20 days of contract award, with shipment FOB destination, and inspection and acceptance occur at the delivery point. No variance in quantity is permitted, with zero percent plus or minus tolerance. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, with a total price of $6.00 per unit, totaling $36.00 for the order. The destination for delivery is Fleet Activities Sasebo, PSC 476 Box 1, FPO AP 96322-0001, United States, with an alternate freight shipping address in Sasebo, Japan. Transportation instructions are governed by DLAD Proc Note C19 and C20. The original required delivery date is August 5, 2026, and the contract is administered by the Defense Logistics Agency under the NAICS code 333415, with primary point of contact Alexis Selby. All supplies are subject to the rules regarding covered defense information and the removal of government identification from non-accepted items.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-187Y

A single check valve with a steel body and stainless steel trim is required, designed for a maximum operating pressure of 150 psi and a maximum temperature of 180 degrees Fahrenheit, with flange-type end connections and an end-to-end length of 4.12 inches nominal. The valve body may be manufactured from bar stock ASTM A36 alloy AISI 1018 as an acceptable alternative to the original cast material. The contract specifies strict compliance with DLA packaging requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The use of Class I ozone depleting chemicals is prohibited, and mercury or mercury-containing compounds may not be intentionally added or come into direct contact with the hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in those cases, portable devices must be shockproof and include a secondary containment boundary. This is classified as a critical application item with authorized part numbers from Admiral Valve LLC. Only one unit is required, to be delivered within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination under MIL-STD-2073-1E packaging guidelines and MIL-STD-129 marking requirements. Palletization must align with DLA standards, and shipment must be sent by the fastest traceable means—parcel post is expressly prohibited. The delivery address is the Nuclear Power Training Unit in Goose Creek, South Carolina, and the contract was issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-187Y with a required delivery date of August 3, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186G

The contract specifies the procurement of a single valve body with NSN 4820-01-337-4114 and part number 6839586 for Allison Transmission Inc or 2AX532 for Oshkosh Defense LLC under solicitation SPE7MC-26-T-186G. The item must be delivered in one unit within ten days of award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination location, Fort Bliss, Texas, where the shipment must be sent via the Redball Express system using the fastest traceable means, explicitly excluding parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, following DLA Packaging Requirements for Procurement, with unit packaging and palletization strictly adhering to specified standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The contract includes detailed shipping and marking instructions, including the military freight address, project code, and government-only identifiers, and the required delivery date is August 5, 2026. The official point of contact is Paula McClary, reachable via email and phone, with additional compliance and ordering details accessible through the DLA eProcurement portal.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186N

The contract specifies the procurement of a single globe valve made of 316 stainless steel with a 1/4 inch female NPT connection, designated by NSN 4820-01-042-2921 and part numbers 3008143-1 and 4251F4Y, for use in high-pressure, high-temperature environments up to 2000 PSI and 600 degrees Fahrenheit, primarily for end item storage and recharging applications. It is classified as a critical application item with strict compliance requirements, including zero tolerance for intentional mercury or mercury-containing compounds in direct contact with the hardware, except for specific exceptions like batteries, fluorescent lamps, sensors, and weapon systems, which must meet additional containment standards per NAVSEA 5100-003D. The valve must adhere to all technical and quality requirements referenced from the DLA Master List, and packaging must conform to MIL-STD-2073-1E and MIL-V-3, with Level A preservation when ZZ is used as the preservation method. Marking and labeling must follow MIL-STD-129 without special codes, and palletization must meet DLA packaging guidelines. Delivery is required within 20 days FOB destination to the USS THEODORE ROOSEVELT CVN 71, FPO AP 96632, via the fastest traceable means—not parcel post—with a required delivery date of August 10, 2026, and shipment must be coordinated using RDD 777 and the DLA Vendor Shipment Module. The contract is issued under solicitation SPE7MC-26-T-186N with a fixed quantity of one unit, no allowable variance, and inspection and acceptance occurring at destination.

Industrial Valve Manufacturing

POSTED

DEADLINE

VALVE, FLOW CONTROL

Solicitation # SPE7MC-26-T-187T

The contract is for the procurement of four flow control valves, identified by NSN 4820011979566 and part number 025-11046, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. Delivery is required within five days of contract award, with shipment originating from the supplier and delivered FOB origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The unit price is $4.00 per valve, totaling $16.00 for the full order, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-V-3, including preservation methods specified as Level A when ZZ is used, and marking must adhere to MIL-STD-129. Palletization and packaging requirements follow DLA’s RP001 standards, with no special marking codes applied. Inspection and acceptance occur at origin, and the item is classified as a critical application component. The contract is issued under solicitation SPE7MC-26-T-187T, with a response deadline of August 20, 2026, and is managed by the Defense Logistics Agency under NAICS code 332911. Technical and quality requirements are incorporated by reference from the DLA Master List, and the latest revisions in effect on the solicitation issue date govern compliance. The point of contact for inquiries is Chad Zernis, with the delivery scheduled for January 14, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

PLATE, INSTRUCTION

Solicitation # SPE8E6-26-T-4163

This contract pertains to the procurement of a single unit of Plate, Instruction, identified by NSN 9905-01-090-7680 and part number 3561030, under solicitation SPE8E6-26-T-4163. The item is subject to specific DLA packaging requirements as outlined in the DLA Master List of Technical and Quality Requirements, with applicable technical standards referenced by R and I numbers. It is classified as a Type I (Code M) item with a non-extendable 24-month shelf life, requiring special marking code 32 to indicate this requirement. Packaging must comply with MIL-STD-2073-1E, including preservative methods, wrap materials, and unit container specifications, while marking must adhere to MIL-STD-129. The shipment must be transported via traceable means, excluding parcel post, to the designated delivery point at Rapid City, SD, with delivery due within 10 days of contract award and no tolerance for quantity variance. The contract specifies FOB origin delivery, with inspection and acceptance occurring at the destination. The Government retains control over the item’s handling and disposition, with specific instructions for removal of government identification from non-accepted supplies. The supply chain data includes the supplier address, shipment details through W8WP SD ARNG CSMS 2, and mandatory reporting identifiers such as RDD E, project TP 2, and supplier code W81LBJ. The contract is governed by DoD unit-of-issue standards, and Covered Defense Information provisions apply. The contract is issued by the Defense Logistics Agency under NAICS code 339950, with Brett Scull designated as the primary point of contact. The solicitation closed on August 20, 2026, with an original required delivery date of August 5, 2026, and all contractual obligations must be fulfilled within the prescribed parameters.

Sign Manufacturing

POSTED

DEADLINE

COATING KIT, RAIN ER

Solicitation # SPE8ES-26-T-2548

The contract pertains to the procurement of a Coating Kit, Rain ER, identified by NSN 8010-01-580-5987 and part number FP-100CM, with a quantity of four kits, each unit of issue being a KT. Delivery is required within 20 days to Edwards Air Force Base, California, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. The item is classified as a TYPE 2, CODE 4 shelf-life item with a 12-month extendable shelf life, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Packaging and shipping must adhere to DLA packaging requirements, including specific hazardous materials handling protocols under IP025, and traceable freight methods only are permitted—parcel post is prohibited. The supplier, CAAP CO., INC., must submit Safety Data Sheets and compliant Hazardous Communication Standard labels in accordance with 29 C.F.R. 1910.1200, effective June 1, 2015, and ensure employee training on these new requirements. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the acquisition type and solicitation timeline. The procurement is under solicitation SPE8ES-26-T-2548, with a response deadline of August 17, 2026, and the original required delivery date set for August 6, 2026.

Paint and Coating Manufacturing

POSTED

DEADLINE

HARNESS ASSEMBLY, MASK,

Solicitation # SPE8E6-26-T-4162

The contract pertains to the procurement of a harness assembly for an oxygen mask, identified by part number 460-190-457 and NSN 4240-01-392-6079, with a quantity of ten units to be delivered FOB origin within twenty days. The supplier, Interspiro Inc., is required to comply with all technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and governed by the revision in effect at the time of solicitation or award. Packaging must adhere to MIL-STD-2073-1E, with specific methods including preservation, labeling, and containment standards, and must follow MIL-STD-129 for marking, strictly prohibiting the use of plastics for wrapping or cushioning where feasible. Delivery is to be made to the Southwest Regional Maintenance Center in San Diego, with hazardous material shipping instructions directing delivery to Building 3322T, and parcel post is explicitly prohibited; shipping must occur via the fastest traceable method. Inspection and acceptance occur at the destination with no variance allowed in quantity. The contract, issued under solicitation SPE8E6-26-T-4162, carries a unit price of $10.00 for a total value of $100.00 and includes restrictions on the handling of covered defense information. The required delivery date is August 10, 2026, and the contract includes specific government use codes for tracking and logistics.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-186H

A safety relief valve with NSN 4820-01-588-7177 and part number 517.00005.3 is being procured by the Defense Logistics Agency under contract SPE7MC-26-T-186H, with a single unit requirement to be delivered within ten days of contract award. Delivery is FOB origin and must comply with stringent packaging standards per ASTM D3951 and MIL-STD-129, while adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications. The item must be packaged and palletized according to RP001 DLA Packaging Requirements, with no quantity variance permitted. The destination for delivery is Fort Riley, Kansas, with shipment required via the fastest traceable means, excluding parcel post, and marked with the official military shipping identifier W55XGJ and RDD 555. The contract specifies that all labeling and documentation must reflect government standards, and the item must be inspected and accepted at the destination. The solicitation was issued on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is August 5, 2026. The point of contact for inquiries is Paula Mcclary, reachable via email and phone provided in the contract documentation.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-186E

The contract pertains to the procurement of a single DISK, VALVE with NSN 4820012210266, supplied by HUNT VALVE COMPANY, INC. under solicitation SPE7MC-26-T-186E. The item is required in a quantity of one unit with a delivery deadline of 20 days from the award, delivered FOB destination, and subject to zero variance in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and all markings must adhere to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and the shipment is addressed to USS BOXER LHD 4 at FPO AP 96661. The item is to be shipped via vessel under DLAD PROC NOTE C19 and C20, with a required delivery date of August 5, 2026. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, particularly excluding intentional use of mercury or mercury-containing compounds in or on the hardware, with limited exceptions for approved functional applications like certain batteries or instruments, which must include secondary containment as per NAVSEA 5100-003D. All supplies must be free of government identification if non-accepted, and the unit of issue is the individual piece (EA). The Defense Logistics Agency issues this solicitation under NAICS code 332911, with Paula Mcclary listed as the primary point of contact. The delivery is part of a larger logistical effort identified under project 9AL TP 2 and requires use of the VSM system for vendor shipment coordination.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2546

This contract pertains to the procurement of 100 ounces of adhesive with NSN 8040-01-420-0999 under solicitation SPE8ES-26-T-2546, issued by the Defense Logistics Agency. The adhesive must comply with multiple technical and quality standards including SAE AMS-S-8802F, MIL-STD-129R, MIL-STD-147F, and Federal Standard 313F, and is classified as a Type I (Code G) item with a non-extendable shelf life of nine months. All hazardous materials must be accompanied by Safety Data Sheets (SDS) formatted to 29 C.F.R. 1910.1200 standards and labeled in accordance with the Globally Harmonized System, with supplier training on these requirements mandatory prior to award. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, including specific marking per MIL-STD-129 and the special code 32 indicating Type I shelf life. Palletization and shipping must adhere to RP001 and IP025 for hazardous materials, with freight shipped via traceable means only and no parcel post permitted. Delivery is FOB destination within 20 days of award to Fort Benning, Georgia, with zero variance allowed in quantity and inspection and acceptance occurring at the delivery point. The contract calls for full compliance with DLA’s Master List of Technical and Quality Requirements, and the unit of issue is the ounce as defined by DoD standards.

Adhesive Manufacturing

POSTED

DEADLINE