Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Packaging, Palletization, and Marking Services

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of packaging, palletization, and marking services for gasket shipments in full compliance with Department of Defense standards and specific directives from the Defense Logistics Agency. All work must adhere to military-grade requirements for handling, securing, and labeling materials to ensure proper identification, transportability, and readiness for military logistics systems. The packaging and marking must meet exacting specifications for durability, clarity, and compliance with federal and defense regulations to facilitate seamless integration into the DoD supply chain. This is a subcontract opportunity under NAICS code 493190, with performance required at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation was posted on August 7, 2026, and responses are due by August 17, 2026. The contracting organization is the Department of Defense, specifically under Land Supplier Operations Vehicle Support, and all deliverables must be completed and ready for shipment prior to the specified deadline. Contractors are expected to demonstrate proven capability in meeting stringent defense packaging and marking protocols without deviation.

General Info

Packaging, palletization, and marking gasket shipments to DOD standards at Tinker AFB by August 17, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide DoD-compliant packaging, palletization, and marking of gasket shipment per DLA-specific and military standards prior to delivery.

Similar Contracts

Same NAICS industry code

Packaging, Labeling & Logistics CoordinationThe contract requires full compliance with MIL-STD-129 standards for the packaging and labeling of recessed washers, ensuring all materials are properly marked, barcoded, and documented for military logistics. Packaging must adhere to RP001 guidelines for palletization, and all shipments must be coordinated through the Vendor Shipment Module (C20) to ensure accurate tracking and integration with defense supply systems. The work involves end-to-end logistics preparation, from initial packaging through final outbound shipment, with strict adherence to military specification requirements to support seamless receipt and inventory management. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with a NAICS code of 493190 indicating warehousing and storage services. The solicitation was posted on August 7, 2026, with proposals due by August 21, 2026. Place of performance and point of contact details are not specified, but all activities must align with federal defense logistics protocols. The successful contractor will be responsible for maintaining compliance throughout the supply chain, ensuring every unit is properly identified, palletized, and shipped via the designated C20 system to meet military delivery expectations.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Secure Logistics & Packaging for Military ShipmentsThe contract requires the packaging, preservation, and preparation of maintenance kits in strict accordance with MIL-STD-2073-1E standards, ensuring all items are properly labeled, cushioned, and secured for transport. The work must support FOB origin delivery, meaning the contractor is responsible for all handling and packaging until the goods are loaded onto the initial carrier at the designated origin point. Every step of the process—from internal cushioning to external labeling—must meet exacting military requirements to guarantee durability, traceability, and integrity during transit under demanding conditions. This subcontract, issued under NAICS code 493190, is managed by the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT program, with performance centered at the New Cumberland, Pennsylvania location, ZIP code 17070-5002. The solicitation was posted on August 7, 2026, and proposals must be submitted no later than August 14, 2026. Contractors must demonstrate capability to comply fully with military packaging regulations, handle secure logistics, and ensure readiness for immediate operational deployment, with all work geared toward supporting the readiness and sustainment of defense equipment systems.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Packaging, Palletization, and MIL-STD-129 LabelingThis contract requires the final packaging, palletization, and labeling of engine stay assemblies in full compliance with DLA RP001 and MIL-STD-129 standards, ensuring proper barcoding and containerization for FOB Destination shipment. The work must adhere strictly to military packaging and labeling protocols to guarantee seamless handling, tracking, and delivery throughout the supply chain. The solicitation is a subcontract under a Total Small Business Set-Aside, designated for small businesses pursuant to SBA regulations and FAR 19.5, with the NAICS code 493190 indicating warehousing and storage services. It was posted on August 7, 2026, and responses are due by September 8, 2026. The contracting activity falls under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance location not specified. All work must align with federal military logistics standards to support defense supply chain requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

General Office Supplies Consolidation & FulfillmentThe contract titled General Office Supplies Consolidation & Fulfillment is a subcontract issued by the Defense Logistics Agency under the Department of Defense to aggregate, kit, and deliver a wide range of office supply items according to specific delivery orders. It operates under a CLIN structure to streamline fulfillment, ensuring multiple items are bundled and dispatched efficiently in alignment with operational requirements. The work is governed by NAICS code 493190, which classifies it under other warehousing and storage services, reflecting its focus on logistics coordination rather than direct manufacturing or retail. The contract was posted on August 7, 2026, and is designed to support federal supply chain needs through consolidated fulfillment, reducing fragmentation in procurement and delivery. While no specific place of performance or point of contact is provided, the contract is accessible via a DIBBS portal link, indicating its integration into the DoD’s procurement and logistics infrastructure. The absence of a set-aside designation suggests this is an open competition, and the structure implies scalability to accommodate varying order volumes across multiple delivery timelines, ensuring consistent supply chain support for government operations.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires strict adherence to federal and military standards for the proper packaging, labeling, and documentation of hazardous materials shipments, ensuring safety and regulatory compliance throughout the transportation process. This subcontract is issued under the Defense Logistics Agency, part of the Department of Defense, and falls under NAICS code 493190, which pertains to other supporting activities for transportation. All work must meet rigorous operational and safety protocols established by military directives and federal hazardous materials regulations, with no flexibility in documentation or handling procedures. The solicitation was posted on August 7, 2026, with a firm response deadline of August 17, 2026, leaving a narrow window for prospective contractors to submit proposals. The place of performance is not specified, indicating that services may be required at multiple locations tied to military logistics operations. While no set-aside type is designated, the nature of the work demands specialized expertise in hazardous material handling, and contractors must demonstrate proven experience with Defense Department compliance requirements. All submissions must align precisely with the technical and administrative expectations outlined in the full solicitation available through the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

Military-Compliant Packaging, Marking & ShippingThe contract requires full compliance with MIL-STD-129 standards for the packaging, labeling, and shipping of turbine ducts, ensuring all items are properly barcoded, protected against environmental hazards, and prepared for military logistics. All packaging must meet strict military specifications for durability, identification, and traceability throughout the supply chain. The work involves end-to-end handling from final assembly to delivery, with a designated destination at Tinker Air Force Base. The contract falls under NAICS code 493190, classifying it as other warehousing and storage, and is structured as a subcontract within the Department of Defense’s procurement framework managed by the Defense Logistics Agency. Although specific performance locations and contact details are not provided, the requirement implies coordination with military logistics units to ensure timely and accurate delivery. Compliance with federal military standards is mandatory, and failure to meet labeling, marking, or environmental protection requirements could result in rejection of shipments.

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Marking, and Palletization ServicesThe contract requires full compliance with military standards for the packaging, marking, and palletization of finished tees, specifically adhering to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA RP001 for barcoding and FOB origin preparation. All work must be executed to ensure uniformity, traceability, and readiness for military logistics, with barcodes correctly applied and shipment documentation in alignment with federal defense protocols. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the site where all packaging and palletization activities must occur. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 493190, which pertains to other warehousing and storage services. The solicitation was posted on August 7, 2026, with responses due by August 14, 2026, leaving a narrow window for eligible small businesses to submit proposals. The contracting activity originates from the Nuclear Reactor Program under the Department of Defense, signifying the critical nature of the items being packaged and the stringent operational requirements tied to defense logistics. Failure to comply with any of the referenced military standards could result in rejection of the deliverables and potential contract non-performance.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Hazardous Materials Handling and Safety Compliance

Defense Logistics Agency

POSTED

DEADLINE

On-Site Fleet Parts Inventory Management & VMI/CMI Program DeliveryThe contract seeks a vendor to deliver vendor- or customer-managed inventory services for automotive and fleet parts at public agency locations across Ohio, requiring comprehensive on-site staffing, real-time inventory tracking, automated restocking, and full program administration. The scope includes maintaining optimal stock levels, ensuring parts availability for fleet operations, and managing logistics through a structured VMI/CMI framework tailored to the needs of public sector vehicle maintenance. The provider must operate effectively within agency facilities, adhere to strict inventory accountability standards, and coordinate seamlessly with agency personnel to minimize downtime and support operational readiness. The opportunity is structured as a subcontract under NAICS code 493190 and is posted by the Cooperative Council of Governments with a response deadline of September 4, 2026. Performance will occur at multiple public agency sites in Ohio, though specific locations are not detailed. The contract does not specify a set-aside designation, and no point of contact information is provided. Interested parties must submit responses through the BonfireHub portal by the stated deadline to be considered for award.

Cooperative Council Of Governments

POSTED

DEADLINE

Military-Grade ESD and Packaging ServicesThe contract requires the provision of individual ESD-protected packaging and military-compliant marking for each PCB unit, adhering strictly to Type III, Class I ESD materials as defined by MIL-PRF-81705E. Each unit must also meet the packaging and marking standards outlined in MIL-STD-2073-1E and MIL-STD-129R to ensure full compliance with Department of Defense requirements for environmental protection, traceability, and durability under harsh conditions. The work is to be performed with precision to safeguard sensitive electronics from electrostatic discharge throughout handling, storage, and transit. This subcontract is issued by the Sflc Procurement Branch 1 under the Department of Homeland Security with a place of performance in Curtis Bay, Maryland, 21226. The solicitation was posted on August 7, 2026, with a response deadline of August 12, 2026, at 4:30 PM Eastern Time. The NAICS code 493190 indicates the scope aligns with other transportation and warehousing services related to specialized logistics, and the contract demands rigorous adherence to military-grade specifications without flexibility in material selection or marking procedures. All deliverables must be batch-traceable and certified to meet federal defense standards for quality and security.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Packaging, Labeling, and Logistics for Military ShipmentThe contract requires the packaging, preservation, and labeling of headset assemblies in strict compliance with military standards, particularly MIL-STD-129, to ensure uniformity and readiness for defense logistics. All items must be properly preserved against environmental damage and clearly labeled with the required barcodes, data elements, and tracking information as mandated by federal military specifications. Shipping is to be conducted under FOB Destination terms, meaning the contractor assumes full responsibility for the condition and delivery of the goods until they reach the designated destination, with mandatory delivery confirmation required upon receipt. This is a Small Business Set Aside subcontract under NAICS code 493190, exclusively available to small businesses, and is managed by the Defense Logistics Agency Aviation under the Department of Defense. The opportunity was posted on August 7, 2026, with a firm response deadline of August 24, 2026, at 7:00 PM. While specific location details for performance or point of contact are not provided in the data, the work is tied to military supply chain requirements and must be executed to support defense readiness priorities. Participation is restricted to eligible small businesses through the SBA’s certification program.

POSTED

DEADLINE

Hazardous Chemical & Gas Cylinder ManagementThe contract pertains to the comprehensive management of hazardous chemicals and compressed gas cylinders, encompassing handling, storage, inventory control, transportation, and disposal with strict adherence to FIFO rotation practices and proper labeling standards. All activities must ensure regulatory compliance and safety throughout the lifecycle of these materials, with emphasis on accurate tracking and orderly stock rotation to minimize risk and maintain operational efficiency. The work is required to be performed at a designated location in Boulder, Colorado, under a Small Business Set Aside designation, restricted to eligible small businesses. This subcontract falls under NAICS code 493190 and is sponsored by the Department of Commerce, specifically the National Institute of Standards and Technology. The solicitation was posted on August 7, 2026, with a response deadline of August 20, 2026. While no specific point of contact is listed, interested parties must submit proposals through the official SAM.gov portal before the stated deadline. The contract environment necessitates strict adherence to federal safety protocols and a demonstrated ability to manage sensitive hazardous materials in a controlled, compliant manner.

Department Of Commerce Nist

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Cybersecurity Compliance & CMMC Assessment ServicesThe contract seeks third-party assessment and advisory services to support CMMC Level 2 certification and full compliance with NIST SP 800-171 requirements for handling Controlled Unclassified Information. The work involves evaluating current cybersecurity practices, identifying gaps, implementing necessary controls, and preparing for an official CMMC assessment to ensure the contractor meets Department of Defense cybersecurity standards. Services are expected to cover documentation, policy development, employee training, system configuration, and ongoing compliance monitoring to meet the framework’s requirements. This subcontract is issued under NAICS code 541611 for management, scientific, and technical consulting services and is associated with the Department of Defense through the Land Supplier Operations Vehicle Support organization. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 7, 2026, and responses are due by August 14, 2026. The effort is critical for enabling the contractor to handle sensitive government information securely and maintain eligibility for future DoD contracts requiring CMMC certification.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

OEM-Certified Component Supply for Maintenance KitsThe contract seeks the supply of OEM-certified components for the assembly of vehicular maintenance kits identified by NSN 4910-01-591-4509, ensuring all parts meet rigorous defense supply chain standards with complete traceability from manufacturer to final assembly. Compliance with military specifications and component authenticity is mandatory, requiring vendors to document and verify the origin, production history, and integrity of each part to prevent counterfeiting and ensure operational reliability in field conditions. The work is positioned under NAICS code 336390, indicating focus on other transportation equipment manufacturing, and is structured as a subcontract under the Department of Defense’s Land Supplier Operations Vehicle Support organization. The solicitation was posted on August 7, 2026, with a firm response deadline of August 14, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, 17070-5002, where final kit assembly or inspection may occur. Although no set-aside status is specified, bidders must fully adhere to defense logistics and quality assurance protocols, including documentation formats and audit trails required by federal defense procurement regulations. The contract is accessible via the DIBBS platform, and prospective suppliers are expected to demonstrate capacity to deliver certified components on schedule while maintaining unrestricted access to source data and supply chain records throughout the lifecycle of the delivered kits.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract titled Hazardous Materials Compliance and Labeling requires strict adherence to OSHA and Department of Defense standards for the proper classification, hazard communication, and labeling of all packages containing hazardous materials. The work must ensure that all hazardous substances are accurately identified, documented, and marked in accordance with federal regulations to safeguard personnel, facilitate safe handling, and maintain regulatory compliance across logistics and supply chain operations. The place of performance is designated as Tinker Air Force Base with a Zip Code of 73145-8000, indicating the operational focus within this key DoD installation. This subcontract is classified under NAICS code 541690, which pertains to other scientific and technical consulting services, suggesting the work involves specialized expertise in hazardous materials management rather than direct manufacturing or transportation. The solicitation was posted on August 7, 2026, with a response deadline of August 17, 2026, creating a ten-day window for potential offerors to submit proposals. The contracting organization is the Department of Defense under the Land Supplier Operations Vehicle Support office, and the contract is accessible via the DIBBS platform for interested parties to review details and submit responses.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Gasket Manufacturing and SupplyThe contract requires the manufacture or supply of 25 precision metal gaskets designated by NSN 5330015011469 and part number AN123024, fully compliant with applicable military specifications and adhering to zero-defect sampling standards to ensure rigorous quality control. The gaskets must be produced to exacting technical requirements suitable for defense applications, with delivery expected to fulfill operational readiness needs under strict reliability benchmarks. This subcontract opportunity, posted on August 7, 2026, with a response deadline of August 17, 2026, is managed under the NAICS code 332999 for other miscellaneous fabricated metal product manufacturing. Performance is required at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, indicating the end-use location within the Department of Defense’s Land Supplier Operations Vehicle Support organization. Interested parties must submit proposals through the designated DIBBS portal before the deadline to be considered for award.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-162X

This contract is for the procurement of a gasket identified by part number AN123024 and national stock number 5330015011469, classified as a commercial item under Federal Supply Class 5330/5331. The item must comply with DLA packaging requirements and be manufactured in accordance with SAE AS123020 through AS123119A Revision A dated July 1, 2014, and must be non-asbestos. Twenty-five packaging groups, each containing fifty units, are required for a total of 1,250 units. The contract mandates strict adherence to MIL-STD-2073-1E packaging standards, requiring the item to be sealed in a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117 Type II, Class C, Style 1 due to UV degradation risks. All packaging and marking must follow MIL-STD-129, with no special marking required, and palletization must meet DLA packaging guidelines. Inspection and acceptance are to occur at the destination, with no variance allowed in quantity. The delivery timeline is 168 days from the contract award, with the original required delivery date set for December 22, 2026, and a need ship date of February 2, 2027. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances accepted unless otherwise stated, and attributes must be assigned verification levels or AQLs according to defined criticality. The item is subject to configuration change management through engineering change proposals and deviation requests. Transportation instructions are governed by DLAD Procurement Notes C19 and C20, and all shipments must be delivered FOB origin to DLA Distribution Depot Oklahoma at Tinker AFB. The contract is under the Department of Defense, with the solicitation issued under SPE7L3-26-T-162X, and contact for inquiries is Susan Diamond via DLA email and phone.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

MAINTENANCE KIT, VEHICU

Solicitation # SPE7L3-26-Q-1194

The contract is for a Maintenance Kit, Vehicle with NSN/Part Number 4910-01-591-4509, quantities totaling 310 KT, under purchase request 7016880111. Delivery is scheduled 201 days after the award date. The solicitation, numbered SPE7L3-26-Q-1194, was posted on August 7, 2026, with responses due by August 14, 2026, and is managed by the Department of Defense through the Land Supplier Ops Vehicle Support agency. The point of contact is Natalee Corder, reachable via email and phone provided. The place of performance is in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Technical data associated with this item is subject to U.S. export control regulations, either ITAR or EAR, and its disclosure to any foreign person, regardless of location, is restricted without prior authorization from the Department of State or Commerce. Distribution is limited exclusively to DLA contractors who hold an approved US/Canada Joint Certification Program status, have completed mandatory DOD export control training, and have passed the DLA Export-Controlled Technical Data Questionnaire. DFARS 252.225-7048 governs compliance with these restrictions, applying equally to foreign national employees and subsidiaries of U.S. companies. Access to the data is controlled by the DLA and requires formal approval.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Small Business Subcontracting Support (Administrative)The contract supports the prime contractor in managing small business subcontracting activities, including representation, compliance, and administrative tasks related to UEI and CAGE code maintenance after award. It focuses on ensuring adherence to federal small business regulations and facilitating proper documentation and reporting required for subcontracting obligations. The scope is strictly administrative, centered on post-award support rather than direct service delivery or operational execution. This subcontract opportunity is under the NAICS code 541611 for management consulting services and is associated with the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The contract type is a subcontract with no designated set-aside, and interested parties can access further details via the provided DIBBS portal link.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging and Palletization ServicesThe contract requires precise packaging and palletization of gaskets in full compliance with military and Defense Logistics Agency standards to support government shipment and distribution operations. All work must adhere to strict specifications for material handling, labeling, and load configuration to ensure safe, efficient transport and storage across military supply chains. The performance location is designated as New Cumberland with a ZIP code of 17070-5002, indicating the work must be executed at or near this facility to meet logistical requirements. This is a subcontract opportunity under NAICS code 493190, which relates to other warehousing and storage services, and is issued by the Department of Defense under the Land Supplier Operations Vehicle Support organization. Proposals must be submitted by the response deadline of August 17, 2026, with the solicitation posted on August 5, 2026. While no set-aside designation or point of contact is specified, interested parties must access the official DIBBS platform via the provided link to obtain full solicitation details and submit responses in accordance with government procurement protocols.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Material Compliance and LabelingThe contract requires the provision of comprehensive hazard communication documentation that meets OSHA standards, including accurate safety data sheets and proper labeling for hazardous materials, all in full alignment with DFARS regulations and specific contractual obligations. This work is part of a subcontract under the Department of Defense, managed by LAND SUPPLIER OPNS VEHICLE SPT, with performance mandated to occur in New Cumberland, Pennsylvania, ensuring that all materials handled or supplied comply with federal safety and reporting mandates for military supply chains. The solicitation, posted on August 5, 2026, has a firm response deadline of August 17, 2026, and falls under NAICS code 541690, which encompasses other scientific and technical consulting services, indicating that the contractor must deliver not only physical labeling and documentation but also expert compliance verification. The nature of the contract demands precision in documentation accuracy, adherence to federal defense supply protocols, and readiness for audit or inspection, with no set-aside provisions specified, meaning any qualified subcontractor may respond. Performance must be executed with strict attention to regulatory requirements to ensure safety and operational readiness within Department of Defense logistics.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Gasket Manufacturing and TestingThe contract requires the manufacture, testing, and delivery of precision gaskets that must fully comply with military specifications and federal sourcing requirements, ensuring adherence to stringent quality and performance standards. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with the ZIP code 17070-5002, and the NAICS code 332996 identifies the industry category as Other Fabricated Metal Product Manufacturing. This is a subcontract opportunity issued under the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization, indicating the end-use is for vehicle support systems within defense operations. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, leaving a twelve-day window for potential subcontractors to submit proposals. The contract is not subject to a specific set-aside designation, meaning it is open to all eligible parties without restrictions based on business size or status. All submissions must be made through the DIBBS platform via the provided link, and compliance with all technical, logistical, and regulatory obligations outlined in the military specs is mandatory for award consideration.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Small Business Subcontracting and Socioeconomic Compliance Support

Administrative Management and General Management Consulting Services

POSTED

DEADLINE