Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Waste Collection and Transportation Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the pickup and transport of hazardous waste materials, including liquids, aerosols, and solids, from U.S. military installations in Naval Station Mayport and Naval Air Station Mayport, Florida. Waste is classified under EPA hazardous codes D005, D008, and D018, and must be shipped using approved UN/NA identifiers such as UN3082 and NA3077, ensuring compliance with federal hazardous materials transportation regulations. The service provider is required to handle all aspects of collection, packaging, labeling, documentation, and secure transportation in accordance with environmental and safety standards for hazardous waste. This subcontract falls under NAICS code 484220 for hazardous waste collection and transportation services and is managed by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 17, 2026, and performance is expected to occur at the designated military installations in Mayport, Florida. All operations must be conducted with strict adherence to regulatory requirements, proper chain-of-custody procedures, and timeliness to ensure safe and compliant disposal of hazardous materials generated by defense operations.

General Info

Hazardous waste pickup and transport from Mayport military sites using EPA and UN/NA-compliant procedures.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

484220 - Specialized Freight (except Used Goods) Trucking, LocalView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Pickup and transport of hazardous waste materials (liquids, aerosols, solids) from military installations including Naval Station Mayport and Naval Air Station Mayport, FL, classified under EPA codes such as D005, D008, and D018, shipped using UN/NA identifiers like UN3082 and NA3077.

Similar Contracts

Same NAICS industry code

Trucking and Material HaulingThe contract titled Trucking and Material Hauling is a subcontract under a Total Small Business Set-Aside, designated for businesses certified as small by the SBA, with the NAICS code 484220 covering trucking services for construction materials, equipment, and debris. It was posted on July 25, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense through its W071 Endist Portland office. All transport activities must be performed within Portland, Oregon, at the specified zip code 97204, ensuring logistics align with local operational requirements. The solicitation is not tied to a specific solicitation number, and no point of contact is listed, requiring interested contractors to use the provided SAM.gov link to access full details and submit proposals.

W071 Endist Portland

POSTED

about 11 hours ago

DEADLINE

Small and Diverse Business ParticipationCertified small, minority-, women-, veteran-, or LGBTQ-owned businesses are invited to participate as subcontractors on a marine maintenance project managed by the Port of Seattle under the NAICS code 484220. This opportunity is designed to increase inclusion and economic participation by connecting eligible businesses with subcontracting roles across various trades involved in the project. While no specific set-aside type is designated, the solicitation emphasizes outreach and engagement with diverse business owners to ensure equitable involvement. The opportunity was posted on July 25, 2026, and interested parties should access the full details through the Port of Seattle’s online portal for further instructions and requirements.

Marine Maintenance

POSTED

about 18 hours ago

DEADLINE

Non-Hazardous Urban Waste Hauling and DisposalThe contract is for the transportation and disposal of non-hazardous soil and urban fill waste generated during potable water infrastructure projects, specifically including excavation spoils from water main and meter vault construction and maintenance activities. The scope of work requires compliant hauling and disposal of material classified as non-hazardous, ensuring adherence to environmental and regulatory standards through proper handling, documentation, and final disposal at approved facilities. The work is tied to infrastructure initiatives managed by the Port of Seattle under the agency name Marine Maintenance, with the North American Industry Classification System code 484220 indicating it falls under truck transportation of freight, specifically waste and scrap materials. The contract is structured as a subcontract and was posted on July 25, 2026, with performance expected to occur at locations associated with the Port of Seattle’s water infrastructure projects, though exact locations are not specified. The solicitation is accessible via the Port of Seattle’s online portal for potential bidders seeking to participate in the procurement process.

Marine Maintenance

POSTED

about 18 hours ago

DEADLINE

Hauling and Material TransportCherokee County Government is seeking a subcontractor to handle the transportation of concrete and asphalt debris to designated crushing facilities and the subsequent delivery of processed materials to project sites. This contract falls under NAICS code 484220, which pertains to specialized freight trucking, and is intended to support local infrastructure or construction initiatives by ensuring efficient movement and recycling of construction waste. The solicitation was posted on July 24, 2026, with a response deadline of August 25, 2026, at 3:00 PM, and all bids must be submitted through the Georgia state procurement portal. The work will be performed within Cherokee County, Georgia, though specific locations are not detailed in the provided data. The contract does not specify any set-aside preferences and is open to qualified subcontractors capable of safely and reliably transporting heavy, bulky materials while adhering to environmental and regulatory standards.

Cherokee County Government

POSTED

DEADLINE

in about 1 month

Logistics and Delivery ServicesThe contract is for logistics and delivery services to transport U-bolt hardware from the supplier to various Texas Department of Transportation facilities across the state, ensuring timely and coordinated freight movement with no specified FOB terms establishing responsibility for shipping costs or risk transfer. Performance is required at multiple TxDOT locations throughout Texas, with the supplier responsible for all aspects of transportation coordination and on-time delivery without detailed location specifications provided. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to truck transportation, and was posted on July 24, 2026, with responses due by August 14, 2026. The contract is managed through the Texas SmartBuy portal and administered by the Texas Department of Transportation, with no set-aside type or point of contact information disclosed.

Texas Department of Transportation

POSTED

DEADLINE

Debris Hauling and Disposal ServicesThe City of Beaumont is seeking a contractor to transport and dispose of demolition debris including concrete, metal, tires, and wood from designated sites to approved landfills or recycling facilities, ensuring all activities comply with environmental and safety standards. The contractor must maintain a clean and orderly worksite throughout the duration of the project, minimizing disruption and adhering to all local regulations regarding waste handling and disposal. Services are to be performed under a subcontract arrangement with a NAICS code of 484220, indicating specialized freight trucking for waste and recyclable materials. The solicitation was posted on July 24, 2026, with a response deadline of August 14, 2026, at 4:00 PM. While specific performance locations and point of contact details are not provided, the contract is managed by the City of Beaumont in Texas, and all work must be conducted within the jurisdiction of the agency. Interested parties can access additional information and submission requirements through the official online portal linked in the solicitation notice.

City Of Beaumont

POSTED

DEADLINE

Domestic Freight and FOB-Origin Delivery LogisticsThe contract entails the transportation of gear assemblies from the manufacturer’s location to various destinations within the continental United States under FOB origin terms, meaning the buyer assumes all responsibility and risk once the goods are loaded at the origin point. Performance requires full adherence to WAWF invoicing protocols and accurate, timely submission of on-time delivery reports to ensure compliance and payment. The work is structured as a subcontract under the NAICS code 484220, which classifies it as a general freight trucking service, and is managed by the Department of Defense through its Maritime Supply Chain organization. Bid responses are due by July 29, 2026, with the solicitation officially posted on July 24, 2026, and all logistics must be executed in alignment with DoD supply chain standards.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Specialized Defense Component Supply Chain & LogisticsThe contract pertains to specialized transportation and logistics management for defense shipments rated under the Defense Priority and Allocation System, requiring precise coordination to ensure uninterrupted delivery to DLA San Joaquin. Work involves end-to-end supply chain operations tailored to meet stringent military standards, with strict adherence to priority scheduling, secure handling, and timely movement of critical defense components. All activities must align with federal defense logistics protocols and maintain compliance with the NAICS code 484220, which classifies the services as truck transportation of freight and materials. This is a subcontract opportunity issued by the Department of Defense through DLA San Joaquin, with a response deadline of July 31, 2026, and a posting date of July 24, 2026. The place of performance is tied to the operational needs of DLA San Joaquin, with no specific location identified in the public data, indicating the scope may span multiple sites or regions as required. The contract demands proven expertise in handling DPAS-rated shipments, understanding of military logistics workflows, and the capacity to integrate seamlessly with existing DLA systems and reporting requirements to guarantee mission-critical support.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Domestic and International Logistics / Freight ServicesThe contract seeks providers to handle the domestic and international logistics and freight services for transporting hose assemblies to destinations within the Continental United States, with strict adherence to U.S.-flag vessel requirements for any oceanic leg of the shipment. This subcontract, categorized under NAICS code 484220, is managed by the Department of Defense's Maritime Supply Chain organization and requires full compliance with federal regulations governing maritime transportation, including the preference for U.S.-owned and U.S.-crewed vessels when applicable. The solicitation is open for responses until July 29, 2026, with all proposals expected to demonstrate capability in managing end-to-end freight movement, ensuring timely delivery, and meeting the specific regulatory and operational standards for defense-related logistics. Performance will occur across multiple domestic locations and may involve international routing where necessary, but final delivery must be completed within CONUS.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Government Logistics and Shipment ServicesThe contract requires the transport and delivery of packaged toner cartridges to DLA Distribution in New Cumberland, Pennsylvania, with strict adherence to Department of Defense shipping protocols and mandatory proof of delivery. All services must comply with DLA’s established procedures to ensure accurate, timely, and secure handling of materials. The solicitation is a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, aligning with the NAICS code 484220 for truck transportation of general freight. The opportunity was posted on July 24, 2026, with a response deadline of July 31, 2026, and is managed by the Nuclear Reactor Program under the Department of Defense. Performance is limited to the specified location in New Cumberland, PA, and all contractors must meet the federal requirements for government logistics contracts, including documentation, tracking, and regulatory compliance.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Domestic Freight and FOB Origin Shipment ServicesThe contract provides for domestic freight transportation services from the contractor’s facility to DLA Distribution in New Cumberland, Pennsylvania, under FOB Origin terms, meaning the contractor assumes all responsibility and risk for the shipment until it is loaded onto the carrier at the point of origin. This is a subcontract under NAICS code 484220, which classifies it as truck transportation services, and is managed by the Defense Logistics Agency under the Department of Defense. The posting date indicates this opportunity was made available in July 2026, and it is structured for performance in the United States with a specific end point at the designated DLA facility. The contract does not specify a solicitation number or detailed point of contact, and the place of performance and agency office address fields are incomplete, though the destination is clearly defined. The agreement is exclusively for first-destination shipments, focusing on the initial movement of goods from the contractor’s location to the government receiving site under terms that transfer liability to the carrier upon pickup.

Defense Logistics Agency

POSTED

DEADLINE

Supply Chain and Logistics ManagementThe contract supports supply chain and logistics management for order fulfillment and delivery to continental United States locations under FOB Destination terms, requiring full responsibility for transportation, risk, and final delivery to the designated destination. The contractor must ensure seamless integration with the Defense Logistics Agency’s ordering systems to maintain real-time visibility, accuracy, and responsiveness across the supply network. Surge capacity is a critical component, demanding the ability to rapidly scale operations during peak demand or emergency scenarios without compromising timelines or service levels. The work falls under NAICS code 484220, classifying it as truck transportation of freight, and is structured as a subcontract within the Department of Defense’s Strategic Acquisition Program Directorate. Proposals are due by August 25, 2026, with the solicitation posted on July 24, 2026, allowing potential offerors time to prepare detailed响应. While specific performance locations and points of contact are not detailed, the scope implies nationwide coverage across CONUS, necessitating robust infrastructure, reliable carriers, and proven experience in military logistics environments. Failure to meet delivery timelines or system integration requirements could disrupt mission-critical supply chains.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

ITAR Compliance and Technical Data ManagementThe contract requires comprehensive management of ITAR-controlled technical data, ensuring strict adherence to U.S. export control regulations and seamless coordination with the Directorate of Defense Trade Controls and the Joint Certification Program. The contractor will be responsible for implementing and maintaining compliance protocols to safeguard sensitive defense-related information, handling all aspects of documentation, access controls, and reporting procedures mandated by ITAR. This includes establishing internal processes to monitor, classify, and transfer technical data while ensuring all personnel and partners follow export compliance standards and engage effectively with DDTC and JCP requirements. As a subcontract under the Department of Defense through the Defense Logistics Agency, the engagement demands a high level of operational precision and regulatory expertise, particularly in navigating the complex landscape of international defense trade controls. The work is governed by NAICS code 541611, indicating a focus on management consulting services related to administrative and general management. The response deadline is August 3, 2026, and performance may occur at any location as no specific place of performance is defined, allowing flexibility for remote or distributed operations as long as compliance obligations are fully met without compromise.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Secure Military Packaging and MarkingThe contract titled Secure Military Packaging and Marking requires full compliance with MIL-STD-2073-IE and RP001 standards for the packaging, preservation, labeling, and marking of military equipment and supplies. This includes accurate barcoding, application of special marking codes, and adherence to strict preservation techniques to ensure product integrity during storage and transit. All packaging and labeling must meet Department of Defense specifications to support reliable identification, handling, and logistics operations across the supply chain. The work is classified as a subcontract under NAICS code 561910 and is being managed by the Defense Logistics Agency under the Department of Defense. Responses are due by August 3, 2026, with the solicitation posted on July 24, 2026, and performance locations are not specified beyond the overarching jurisdiction of the agency.

Packaging and Labeling Services

POSTED

DEADLINE

Product Verification and First Article TestingThe contract requires the contractor to perform First Article Testing (FAT) and support Product Verification Testing (PVT) for defense-related products, encompassing both destructive and non-destructive evaluation methods to ensure compliance with technical specifications and quality standards. Testing activities are critical to validating design and manufacturing processes prior to production scale-up, with results directly influencing acceptance decisions for defense systems. The work is classified as a subcontract under NAICS code 541380, indicating it falls within engineering services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and performance is expected to occur at an unspecified location under the agency’s jurisdiction. No set-aside preferences or specific geographic requirements are indicated, and the contract is accessible through the DIBBS portal for eligible subcontractors to respond.

Testing Laboratories and Services

POSTED

DEADLINE

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Phosphate Coating and Surface TreatmentThe contract pertains to the application of phosphate coating in accordance with specification RQ036, encompassing all stages from surface pre-treatment through coating application to final post-inspection verification ensuring full compliance with required standards. The work must be performed to meet stringent technical and quality benchmarks, with attention to consistency, durability, and adhesion of the phosphate layer to meet defense-grade requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332812 and was posted on July 24, 2026, with a mandatory response deadline of August 3, 2026. Performance location details are unspecified, but the work is intended to support military or defense-related applications. Interested parties must submit proposals before the deadline to be considered, and all deliverables must align precisely with the technical specifications outlined in RQ036 to ensure acceptance and compliance.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Precision Machining of Bipod Leg AssemblyThe contract specifies the precision CNC machining, milling, and finishing of the left-hand machine gun bipod leg in strict accordance with military drawings and technical specifications. The work requires high-accuracy manufacturing processes to meet stringent defense standards, ensuring dimensional integrity, material consistency, and surface finish quality critical for operational reliability in field conditions. All components must be produced using approved methods and materials, with full compliance to government-mandated quality control protocols. Submitted by a subcontractor, the contract is issued under the Defense Logistics Agency within the Department of Defense and classified under NAICS code 332710 for metal forging and stamping. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, indicating a limited window for qualified vendors to bid. Performance location details are not specified, but execution must align with defense logistics requirements, and the work will support a critical small arm component in a military platform. All submissions must adhere to military-grade tolerances and documentation standards to qualify for award.

POSTED

DEADLINE

Specialized Electronics Testing and Verification (PVT)The contract entails specialized product verification testing for electromagnetic relays to ensure full compliance with military environmental and electrical performance standards. This work is performed under a subcontract arrangement designated under NAICS code 541380 and is managed by the Defense Logistics Agency under the Department of Defense. The testing process is critical for validating the reliability and functionality of relays under extreme operational conditions mandated by defense specifications. The contract was posted on July 24, 2026, and is officially linked to the award record SPE7M226P3364, though specific performance location and point of contact details are not provided. The scope is focused exclusively on technical verification activities and does not include manufacturing, procurement, or general logistics support.

Testing Laboratories and Services

POSTED

DEADLINE

Cybersecurity Compliance and CUI Safeguarding SupportThis contract entails the implementation and assessment of cybersecurity controls aligned with NIST Special Publication 800-171 and the Defense Federal Acquisition Regulation Supplement clause 252.204-7012 to ensure the protection of covered defense information throughout contract performance. The work requires a thorough alignment of organizational policies, technical safeguards, and procedural controls to meet federal standards for safeguarding controlled unclassified information. All activities must be conducted with strict adherence to the requirements designed to prevent unauthorized access, disclosure, or compromise of sensitive defense data during execution of subcontracted services. The contract is classified as a subcontract under the North American Industry Classification System code 541512, indicating it involves computer systems design and related services. It is managed by the Defense Logistics Agency within the Department of Defense and is intended to support operational cybersecurity resilience across the defense supply chain. The place of performance and specific location details are not enumerated, but the work is expected to be carried out in alignment with federal cybersecurity mandates regardless of geographic location. Compliance will be continuously monitored and assessed to maintain the integrity and confidentiality of covered defense information.

Computer Systems Design Services

POSTED

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThe contract requires the packaging, marking, and labeling of relays to fully comply with MIL-STD-2073-1E and MIL-STD-129 standards for military shipment and storage. This ensures that all packaging methods, external markings, and labeling requirements meet rigorous Department of Defense specifications for durability, identification, and logistical handling during transport and warehousing. The work is performed under a subcontract, with the Defense Logistics Agency as the overseeing agency under the Department of Defense. The North American Industry Classification System code 488999 indicates specialized support activities for transportation, underscoring the logistical nature of the services. The contract was posted on July 24, 2026, and the place of performance is not specified, suggesting the work may be performed at various contractor facilities as long as compliance is maintained. Full adherence to the military standards is mandatory for acceptance and delivery.

All Other Support Activities for Transportation

POSTED

DEADLINE

Qualified Manufacturer of Electromagnetic RelaysThe contract awards the manufacture and supply of eight electromagnetic relays designated by NSN 5945-01-062-5154, each required to meet the stringent military specifications MIL-R-5757/1K and MIL-DTL-5757N Sup 1, ensuring reliability and performance under demanding operational conditions. The relays must be pre-qualified under the Qualified Products List and Qualified Manufacturer List standards, confirming the manufacturer’s proven ability to consistently produce components that satisfy defense-grade quality and durability requirements. This is a subcontract issued by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 334310 for electronic component manufacturing, with the solicitation posted on July 24, 2026, and performance duties tied to the broader defense supply chain without a specified geographic location for delivery.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Packaging and Marking ServicesThe contract specifies the proper packaging, palletization, and marking of shipments containing sealing compound in full compliance with military logistics standards. All activities must adhere to stringent defense department requirements to ensure safe handling, transportation, and inventory management across military supply chains. The work is classified as a subcontract under the NAICS code 493190, indicating it pertains to other transportation and support activities related to freight. The contract is managed by the Defense Logistics Agency under the Department of Defense, with performance expected to meet operational readiness criteria without geographic restriction specified. The solicitation was posted on July 24, 2026, and the award details are accessible through the DIBBS system using the contract number SPE8ES26P1049.

Other Warehousing and Storage

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The contract pertains to the provision of radiological testing services to determine whether a sealing compound exceeds regulatory thresholds for radioactivity. If testing reveals levels above permissible limits, the contractor is required to issue a formal notification to the appropriate authorities. This work falls under the NAICS code 541380, which covers other scientific and technical consulting services, and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. The requirement is triggered only if radioactive materials are suspected or detected, making it a conditional but critical compliance obligation. Performance is expected to align with federal regulations governingradiological safety, though the specific location of performance is not detailed. The contract was posted on July 24, 2026, and is accessible through the DIBBS system under contract number SPE8ES26P1049.

Testing Laboratories and Services

POSTED

DEADLINE