Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Homeland Security was posted on July 6, 2011. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

HC-144 CASA Parts

Awarded
HSCG38-11-Q-500016Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413
New
International
LH INBOARD FLAP ASSEMBLY [ENSEMBLE DE VOLET INTÉRIEUR GAUCHE (IG)]
Solicitation # T8493-260028
The Government of Canada is seeking a supplier to provide one Left-Hand Inboard Flap Assembly (Part Number 600-14002-1001) for a Challenger CL650 aircraft supporting the Canadian Coast Guard's Air Services Directorate. The contract is for a fixed period from the date of award until March 31, 2027, with a required delivery date of December 7, 2026. Delivery must be made Free Carrier (FCA) to the Aircraft Services Directorate in Ottawa, Ontario. The component must be fully traceable to the Original Equipment Manufacturer or an approved maintenance organization and include an authorized release certificate such as FAA Form 8130-3, EASA Form 1, or TCCA Form One. Additionally, assemblies with 7,800 landings or more require specific Bombardier Maintenance Planning Document task documentation. The contract will be awarded based on the lowest evaluated price following a technical assessment to ensure compliance with all mandatory requirements. Performance will be monitored via a Vendor Performance Management Scorecard focusing on cost, quality, schedule, and management. Payment for undisputed invoices will be issued within 30 days of receipt. Offerors must submit their proposals through the SAP Business Network (CanadaBuys) by November 30, 2026. Requirements include adherence to environmentally preferable packaging standards and compliance with laws prohibiting human trafficking and forced labor.
Government of Canada / Gouvernement du Canada

POSTED

about 17 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The U.S. Coast Guard Aviation Logistics Center intends to award a purchase order for HC-144 CASA aircraft parts under solicitation HSCG38-11-Q-500016. The requirement consists of three specific commercial items: four Alignment Tool Controls (P/N GS23485-2), four Torque Adapters (P/N GS20782-1), and two Turning Fixtures (P/N GS50414-1). Due to the proprietary nature of the parts and a lack of government-owned technical data rights, the agency intends to negotiate with the Original Equipment Manufacturer, Hamilton Sundstrand Corp. The procurement is classified under NAICS code 336413 for other aircraft parts and auxiliary equipment manufacturing. All items must be delivered F.O.B. Destination to the Aviation Logistics Center in Elizabeth City, North Carolina, within 30 calendar days after receipt of the order. Evaluation of offers will be based on the lowest cost technically acceptable, with price as the primary factor and delivery as the secondary factor. All supplies must be individually packaged and marked according to ASTM D 3951 standards and accompanied by a Certificate of Conformance.

General Info

Contract Value

$13,608

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

NC, USA

Set-Aside

NONE

Award Issued Date

Documents

1

J&A for HC-144 Airframe Spare Parts (HSCG38-11-P-500059)

PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Aviation Logistics Center (ALC)(00038)
Contacts2 people available
OfficeElizabeth City, NC, 27909, USA
Office AddressElizabeth City, NC, 27909, USA
Contacts
Daniel Keith HouseContract Specialist
Lucille McEachinContract Specialist

Full Description

Show more
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. The U.S. Coast Guard (USCG), Aviation Logistics Center (ALC), Engineering Services Division (ESD), Procurement Branch intends to issue a purchase order using the procedures of FAR Part 13. This announcement constitutes the only solicitation; proposals for the following items are being requested and a written solicitation will not be issued. Small business set-aside is dissolved because it is not anticipated that two or more small business manufacturers will have the capabilities to supply items for this requirement. This Request for Proposal (RFP) HSCG38-11-Q-500016 is being assigned to this procurement for tracking purposes and incorporates provisions and clauses in effect through Federal Acquisition Circular FAC 2005-51. The North American Industry Classification System Code is 336413 (Other aircraft parts and auxiliary equipment manufacturing) and the size standard is 1000 employees. The United States Coast Guard intends award one (1) purchase order, and to negotiate with Original Equipment Manufacturer (OEM), Hamilton Sunstrand Corp. (Cage Code 73030). All responsible sources may submit offers which shall be considered by the agency. Schedule of Supplies/Services and Price /Cost Est Unit of Unit Total CLIN Description Qty Issue Price Price 0001 Control, Alignment Tool 4 Each P/N: GS23485-2 NSN: 1270-01-506-4260 0002 Torque Adapter 4 Each P/N: GS20782-1 NSN: 5120-01-226-5332 0001 Fixture, Turning 2 Each P/N: GS50414-1 NSN: 4920-01-310-3510 QUANTITIES The quantities shown in the Schedule of Supplies reflect the estimated quantities to be ordered. FAR 52.212-4 CONTRACT TERMS AND CONDITIONS-COMMERCIAL ITEMS (JUN 2010) ADDENDUM FAR 52.252-2 Clauses Incorporated by Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting officer will make their full text available. Also, the full text of a clause may be accessed electronically at Internet address: https://www.acquisition.gov/far 52.204-4 Printed or Copied Double-Sided on Recycled Paper AUG 2000 52.211-14 Defense Priority and Allocation Requirement (Apr 2008) 52.247-34 F.o.b. Destination (Nov 1991) 52.246-15 Certificate of Conformance (APR 1984) (a) When authorized in writing by the cognizant Contract Administration Office (CAO), the Contractor shall ship with a Certificate of Conformance any supplies for which the contract would otherwise require inspection at source. In no case shall the Government's right to inspect supplies under the inspection provisions of this contract be prejudiced. Shipments of such supplies will not be made under this contract until use of the Certificate of Conformance has been authorized in writing by the CAO, or inspection and acceptance have occurred. (b) The Contractor's signed certificate shall be attached to or included on the top copy of the inspection or receiving report distributed to the payment office or attached to the CAO copy when contract administration (Block 10 of the DD Form 250) is performed by the Defense Contract Administration Services. In addition, a copy of the signed certificate shall also be attached to or entered on copies of the inspection or receiving report accompanying the shipment. (c) The Government has the right to reject defective supplies or services within a reasonable time after delivery by written notification to the Contractor. The Contractor shall in such event promptly replace, correct, or repair the rejected supplies or services at the Contractor's expense. (d) The certificate shall read as follows: I certify that on ______ [insert date], the ____ [insert Contractor's name] furnished the supplies or services called for by Contract No._____ via ____ [Carrier] on ________ [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this or on the attached acceptance document. Date of Execution: _____________________________ Signature: _____________________________________ Title: _________________________________________ FAR 52.211-8 Time of Delivery (JUNE 1997)(ALT. I, APR 1984) The Government requires delivery to be made according to the following schedule: REQUIRED DELIVERY SCHEDULE All CLIN's are required 30 calendar days after the date of receipt for each individual purchase order The Government will evaluate equally, as regards to time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above may be considered unacceptable and may be rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply. OFFEROR'S PROPOSED DELIVERY SCHEDULE All CLIN's As Required ___ calendar days after the date of each individual delivery order Offeror's Proposed Delivery Schedule Item No. Quantity Within Days After Date of Contract (b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer may be determined unacceptable and may be rejected. HOMELAND SECURITY ACQUISITION REGULATIONS The following Homeland Security Acquisition Regulations are hereby incorporated by reference, with the same force and effect as if incorporated in full text. The full text of these clauses may be viewed electronically at https://www.dhs.gov. 3052.247-42 F.O.B. Destination only (Dec 2003) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-- Commercial Items (Apr 2011) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [Contracting Officer check as appropriate.] __ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). __ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). __ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2010) (Pub. L. 109-282) (31 U.S.C. 6101 note). __ (5) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (Jul 2010) (Pub. L. 111-5). __ (6) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (DEC 2010) (31 U.S.C. 6101 note). (Applies to contracts over $30,000). (Not applicable to subcontracts for the acquisition of commercially available off-the-shelf items). __ (7) 52.219-3, Notice of Total HUBZone Set-Aside or Sole-Source Award (Jan 2011) (15 U.S.C. 657a). __ (8) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JAN 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). __ (9) [Reserved] __ (10)(i) 52.219-6, Notice of Total Small Business Set-Aside (June 2003) (15 U.S.C. 644). __ (ii) Alternate I (Oct 1995) of 52.219-6. __ (iii) Alternate II (Mar 2004) of 52.219-6. __ (11)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). __ (ii) Alternate I (Oct 1995) of 52.219-7. __ (iii) Alternate II (Mar 2004) of 52.219-7. __ (12) 52.219-8, Utilization of Small Business Concerns (Jan 2011) (15 U.S.C. 637(d)(2) and (3)). __ (13)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2011) (15 U.S.C. 637(d)(4)). __ (ii) Alternate I (Oct 2001) of 52.219-9. __ (iii) Alternate II (Oct 2001) of 52.219-9. __ (iv) Alternate III (Jul 2010) of 52.219-9. __ (14) 52.219-14, Limitations on Subcontracting (Dec 1996) (15 U.S.C. 637(a)(14)). __ (15) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). __ (16)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). __ (ii) Alternate I (June 2003) of 52.219-23. __ (17) 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting (Dec 2010) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (18) 52.219-26, Small Disadvantaged Business Participation Program- Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (19) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (May 2004) (15 U.S.C. 657 f). X (20) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2009) (15 U.S.C. 632(a)(2)). __ (21) 52.219-29 Notice of Total Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (Apr 2011). __ (22) 52.219-30 Notice of Total Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (Apr 2011). X (23) 52.222-3, Convict Labor (June 2003) (E.O. 11755). X (24) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jul 2010) (E.O. 13126). X (25) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). __ (26) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). __ (27) 52.222-35, Equal Opportunity for Veterans (Sep 2010)(38 U.S.C. 4212). X (28) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). __ (29) 52.222-37, Employment Reports on Veterans (SEP 2010) (38 U.S.C. 4212). __ (30) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). __ (31) 52.222-54, Employment Eligibility Verification (JAN 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) __ (32)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (33) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b). __ (34)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (DEC 2007) (E.O. 13423). __ (ii) Alternate I (DEC 2007) of 52.223-16. X (35) 52.223-18, Contractor Policy to Ban Text Messaging While Driving (SEP 2010) (E.O. 13513). X (36) 52.225-1, Buy American Act-Supplies (Feb 2009) (41 U.S.C. 10a-10d). __ (37)(i) 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act (June 2009) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, and 110-138). __ (ii) Alternate I (Jan 2004) of 52.225-3. __ (iii) Alternate II (Jan 2004) of 52.225-3. __ (38) 52.225-5, Trade Agreements (AUG 2009) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). X (39) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). __ (40) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). __ (41) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). __ (42) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). __ (43) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). X (44) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003) (31 U.S.C. 3332). __ (45) 52.232-34, Payment by Electronic Funds Transfer-Other than Central Contractor Registration (May 1999) (31 U.S.C. 3332). __ (46) 52.232-36, Payment by Third Party (Feb 2010) (31 U.S.C. 3332). __ (47) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). __ (48)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). __ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [Contracting Officer check as appropriate.] __ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). __ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 351, et seq.). __ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). __ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). __ (8) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (ii) 52.219-8, Utilization of Small Business Concerns (Dec 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) [Reserved] (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (JAN 2009). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) FAR 52.212-1 INSTRUCTIONS TO OFFERORS - COMMERCIAL ITEMS (Jun 2008) Quotes shall include company name and point of contact solicitation number, nomenclature, part number, unit price, extended price, payment terms and discount offered for prompt payment. All quotes submitted timely by responsible source will be considered for award. Quotes shall only be transmitted electronically via may E-Mail to Contract Specialist, Daniel.K.House@uscg.mil, 252-384-7230, or Contracting Specialist, Lucille.McEachin@uscg.mil, 252-335-6941 and must also conform to requirements of FAR 52.212-1. The closing date and time for receipt of quotes to be considered for this solicitation must reach the Government office designated in this solicitation on or before 3PM EST, May 09, 2011 PRESERVATION, PACKAGING, AND MARKING All parts ordered under this Contract shall be individually packaged in accordance with ASTM D 3951, Standard Practice for Commercial Packaging. Bar coding is preferred but not required in accordance with ANSI/AIM BC1. All parts shall be individually marked with the following information when applicable: National Stock Number, Part Number, Item Name, Quantity, Unit of Issue, Contract Number, and Delivery Order Number. There may be a requirement to assign specific items unique serial numbers, which if required, the Contracting Officer will negotiate with the contractor on a case by case basis. The serial number shall be stamped, engraved, or otherwise permanently affixed to each item. The serial number shall consist of block alphanumeric characters and be clearly visible. PACKING LIST All material shipped or delivered to the U.S. Coast Guard Surface Forces Logistics Center under this contract must be accompanied by an itemized packing list that cites the proper contract and delivery order number. Each packing unit shall have a list of all items contained in that unit. The packing list shall be securely attached to the outside of the container and shall be enclosed in a clear waterproof envelope. Failure to prepare for shipment any item, and/or mark all packages, boxes, etc., as indicated herein shall result in rejection of the shipment and return of the shipment at the contractor's expense. SHIPPING DESTINATION All parts ordered under this contract shall be shipped to the following address: Commanding Officer Aviation Logistics Center 1664 Weeksville Road Building 63 Elizabeth City, NC 27908 FAR 52.212-2 Evaluation-Commercial Items. (Jan 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be the lowest cost technically acceptable to the Government, price and other factors considered. Award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors (part number, and delivery). The following factors shall be used to evaluate offers: 1. Price 2. Delivery Price is the most important evaluation factor, with Delivery being the second most important evaluation factor. Price: The contractor shall provide pricing for schedule of supplies listed in this solicitation. Quotes should indicate nomenclature, part number, unit price, and extended price, any discounts for prompt payment, price reductions offered for quantity purchases, business size standards, and minority classifications. The unit price of each CLIN shall be multiplied by the estimated quantity stated in the schedule. The total price of all CLIN's shall be added together to arrive at an aggregate total. Delivery The Government requires delivery of ALL CLINs to be made NLT 30 days after receipt of order. Earlier deliveries are desired and will be accepted. F.O.B. Destination is requested as the F.O.B. point for the Deliverables. All offers will be considered F.O.B. Destination unless F.O.B. origin is specified AND shipping costs are included. Orders may be issued by the Contracting Officer via telecommunication by facsimile, or by electronic commerce methods. 52.212-3 Offeror Representations and Certifications-Commercial Items. (Oct 2010) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (o) of this provision. (a) Definitions. As used in this provision- "Emerging small business" means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Inverted domestic corporation" means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional Government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern- (1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website. (2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov. After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________. [Offeror to identify the applicable paragraphs at (c) through (o) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The of...

More opportunities from Department Of Homeland Security → Aviation Logistics Center (ALC)(00038)

Same awarding agency

NAICS: 336413
New
Federal
MH-65 PLUG-IN UNION
Solicitation # 70Z03827QB0000006
Solicitation 70Z03827QB0000006 is a request for quotation from the Department of Homeland Security Aviation Logistics Center for the procurement of MH-65 Plug-In Unions (NSN 4730-14-374-1357, Part Number DHS613-513.41). The requirement is for an initial quantity of 117 units, with a firm-fixed price purchase order anticipated on a brand name basis. The government maintains an option to increase the quantity by up to 115 additional units, for a maximum total of 232. All parts must be new manufactured commercial items with clear, auditable traceability to the Original Equipment Manufacturer, Airbus Helicopters (Cage Code F0210), and must be approved in accordance with Federal Aviation Administration guidelines to ensure flight safety. Award will be granted to the lowest priced offeror rated as technically acceptable. Technical acceptability is based on the ability to provide the exact part numbers from the OEM or an approved source. Offerors must provide a Certificate of Conformance and maintain a complete unbroken history of ownership for all parts. Deliveries are requested F.O.B. Destination to Elizabeth City, North Carolina, with strict packaging requirements that prohibit the use of Styrofoam or peanut packaging. Quotations and inquiries must be submitted via email to Raymond V. Marler by October 27, 2026, at 09:00 am EDT.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
Purchase 4 Stub Coupler for U.S. Coast Guard Aircraft HC-144
Solicitation # 70Z03827QL0000013
Solicitation 70Z03827QL0000013 is a request for quotations for the procurement of 30 4 Stub Couplers (NSN 5895-01-415-8947, Part Number 5008528-002) for U.S. Coast Guard HC-144 aircraft. This unrestricted requirement, under NAICS code 336413, will be awarded as a firm-fixed-price purchase order to the lowest priced, technically acceptable offeror. The government reserves the option to purchase an additional 30 units at the same price within one year of the award. All items must be new manufactured commercial products with clear traceability to the original equipment manufacturer, Sci Technology, Inc. (CAGE 2J622), and must include a Certificate of Conformance per FAR 52.246-15. Deliveries are required within 90 days after receipt of the order, with shipping terms limited to F.O.B. Destination or F.O.B. Origin. Items must be shipped to the Aviation Logistics Center in Elizabeth City, North Carolina, and must be packaged to prevent corrosion or decay for at least one year of warehouse storage. Quotations are due by October 23, 2026, at 4:00 p.m. Eastern Time. Offerors must maintain active status in the System for Award Management and provide their Unique Entity Identifier. Evaluation will focus on technical acceptability and price fairness in accordance with FAR 12.204, with specific price evaluation preferences available for HUBZone small businesses.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 488190
New
Federal
Repair and Modify Lighted Panel, IFF and Panel, Lighted RH for U.S. Coast Guard Aircraft HC-144
Solicitation # 70Z03827QL0000010
Solicitation 70Z03827QL0000010 is a request for quotation for the inspection, repair, and modification of aircraft components for U.S. Coast Guard HC-144 aircraft. The scope of work involves the repair and modification of one Lighted Panel, IFF (P/N ECT410834A) to ALC P/N 1100-48-1 and the repair of four Panel, Light RH (P/N ECT410839) to P/N 1100-24-1. The government intends to award a firm-fixed-price purchase order on a sole source basis to E.D.N. Aviation Inc. (CAGE 1PT53), although all responsible sources may submit quotations. The award will be made to the lowest priced, technically acceptable offeror. Technical acceptability requires proof of current FAA, OEM, or Air Force approval and confirmation that work will be performed according to the latest OEM Component Maintenance Manual and Statement of Work. Deliverables include Ready for Issue components and Teardown Inspection Reports due within five calendar days of inspection. All items must be delivered to Elizabeth City, North Carolina, within 90 days after receipt of the order. The contractor must be ISO 9000 compliant and provide a Certificate of Conformance in accordance with FAR 52.246-15. Shipping must be F.O.B. Destination or F.O.B. Origin, as Ex Works and other Incoterms 2020 are not accepted. Quotations are due by October 21, 2026, at 4:00 p.m. Eastern Time.
Other Support Activities for Air Transportation

POSTED

1 day ago

DEADLINE

in 1 day
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS