Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HEAD, SPRINKLER, FIRE PR

Active
SPE8E6-26-T-4060Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 200 fire protection sprinkler heads under NSN 4210-01-231-7168, issued by DLA Dist San Joaquin under solicitation SPE8E6-26-T-4060, with a response deadline of August 17, 2026, and a delivery requirement of 127 days after order. The item is procured in full competition in accordance with military or federal specifications, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA web portal, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes must be assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively, with unspecified attributes deemed major. The drawing for the item is available only during open solicitation via the DIBBS portal, and covered defense information potentially applies, requiring compliance with applicable security protocols. All supplies must be free of government identification if not accepted, and the place of performance is Tracy, CA, 95304-5000, with primary point of contact John Lieb reachable via email and phone for inquiries.

General Info

Procure 200 fire sprinkler heads, NSN 4210-01-231-7168, delivery in 127 days, Tracy, CA, zero defects, MIL-STD-1916 sampling.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E6-26-T-4060 for DLA Troop Support Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
John Lieb
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEAD,SPRINKLER,FIRE PROTECTION
HEAD, SPRINKLER, FIRE PROTECTION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 4210-01-231-7168 Quantity: 200 EA Purchase Request: 7017758639QTY: 200 Delivery: 127 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
SKID, PLATFORM
Solicitation # SPE8EF-26-T-1567
The contract is for the procurement of 2,243 units of a SKID, PLATFORM identified by NSN 3990-01-484-6521 under solicitation SPE8EF-26-T-1567, with a total price of $2,243.00 per unit. Delivery is required FOB origin within 167 days of the contract award, with inspection and acceptance points both set at the destination. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with wooden pallets and containers constructed from heat-treated wood certified by an ALSC-recognized agency, marked clearly and visibly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Oak and chestnut wood must be bark-free, square-edged, or have a moisture content of no more than 20 percent. The contractor is responsible for inspecting each shipment for compliance. Deliveries must be sent to DLA Distribution Red River in Texarkana, Texas, with an original required delivery date of February 5, 2027, and a need ship date of February 1, 2027. The unit of issue is each, with no variance allowed in quantity.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, CYLINDER ST
Solicitation # SPE8E9-26-T-3323
The contract pertains to the procurement of a BRACKET, CYLINDER ST with NSN 4210-01-141-4027 and part number 52427, supplied by TYCO FIRE PRODUCTS LP. A total of 27 units are required at a unit price of $27.00, resulting in a total contract value of $729.00. Delivery is scheduled to occur within 167 days from the contract date, with FOB origin terms and inspection and acceptance points set at the destination. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is classified as a commercial item, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation timeline. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and the shipment must comply with DLA transportation notes C19 and C20 for freight and first destination handling. The required ship date is February 1, 2027, and the original delivery deadline is April 16, 2027. The solicitation was issued under contract number SPE8E9-26-T-3323, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Construction & Equipment MRO Service I under NAICS code 333998.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
HEAD, SPRINKLER, FIRE
Solicitation # SPE8E6-26-T-4007
This contract pertains to the procurement of four brass fire protection sprinkler heads, specifically the Bete Fog Nozzle model 2-1/2 inch SCF70W, identified by NSN 4210-01-386-3436, under solicitation SPE8E6-26-T-4007. The items must be delivered FOB origin within 167 days of contract award, with delivery required by February 1, 2027, despite an original required date of November 15, 2026. The quantity is fixed at four units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and codes, while palletization follows DLA’s RP001 requirements. Hazardous materials guidelines are strictly enforced, prohibiting intentional use of mercury or mercury-containing compounds unless explicitly exempted, such as in certain batteries or instruments, which must include secondary containment per NAVSEA 5100-003D. All shipments must be labeled and addressed to DLA Distribution at the New Cumberland, Pennsylvania facility, following DLA’s transportation and shipping protocols. Technical and quality standards referenced via R and I numbers are governed by the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. The contract prohibits the inclusion of covered defense information and mandates full compliance with all applicable federal procurement and safety standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE8E6-26-T-3992
The contract specifies the procurement of a fire fighting hose reducer, part number 13218E0470-42, constructed from cast or forged brass in accordance with MIL-DTL-52404C, featuring a 2.5-inch National Hose internal thread with swivel and a 1.5-inch National Hose external thread. Plating is not required, and first article testing is mandatory with two units submitted for testing under government quality assurance representative observation, as dictated by MIL-C-52404C and referenced quality assurance provisions. The item is governed by strict inspection and acceptance protocols at origin, with sampling to comply with MIL-STD-1916 or comparable zero-based plans, and non-conformances not permitted unless otherwise specified. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking requirements. The contract includes a separate line item for the first article test unit priced at $1.00, which is non-reimbursable if the test requirement is waived, and the main procurement line item for 11 units at $11.00 each totaling $121.00, with delivery required within 227 days FOB origin to the DLA New Cumberland facility. All technical and quality requirements referenced are incorporated via the DLA Master List, including specific provisions for casting and forging assistance requests if tooling is unavailable to the contractor. The drawing and specification control revisions are detailed and dated, with the governing standard being MIL-DTL-52404C, and the product classified as Type XV, Class D. The contract explicitly prohibits government identification removal from non-accepted supplies and includes protections for covered defense information. Delivery is restricted to the specified origin point with zero variance allowed in quantity, and transportation logistics are governed by specific DLA procedural notes. The solicitation number is SPE8E6-26-T-3992, with a response deadline in August 2026 and a required delivery date set for April 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
SEAL, TAMPER PROOF
Solicitation # SPE8E6-26-T-4062
The contract is for the procurement of tamper-proof seals under solicitation SPE8E6-26-T-4062, issued by DLA Dist San Joaquin under a Women-Owned Small Business Set-Aside, with a NAICS code of 333998. The item, identified by NSN 4210-01-446-1015 and part numbers 322-YELLOW and 6630000-Y, is to be supplied in a quantity of 252 MX with a firm fixed price and no variance allowed in quantity. Delivery is required within 69 days of award, FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, CA. All packaging must comply with DLA’s master technical and quality requirements, incorporating MIL-STD-129 labeling, and adhere to either Fed-Std-313 for hazardous materials under IP025 or ASTM D3951 for non-hazardous items, with DLA standards taking precedence. Packaging and palletization must meet RP001 requirements, and the unit of issue and quantity per unit pack must align precisely with the contract specifications. The delivery must be completed by February 12, 2027, with an original ship date of October 26, 2026, and transportation logistics are governed by DLA procurement notes C19 and C20. All technical and quality standards referenced are controlled by the DLA Master List effective on the solicitation issue date.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
COUPLING ASSEMBLY, HOSE
Solicitation # SPE8E9-26-T-3300
The contract is for the procurement of four coupling assemblies, hose, fire fighting, identified by NSN 4210-00-368-2904 and part number 502, manufactured by Service Brass and Aluminum Foundry in Phoenix, AZ. Each coupling is brass with both ends female, featuring a 2-1/2 inch NH swivel interface with eight flat lugs and must be marked in accordance with MIL-STD-130 Section 5.3.1. Configuration control follows MIL-STD-973, excluding specific subparts. The product must not contain intentionally added mercury or mercury-containing compounds, except for limited functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. Delivery is scheduled for 167 days after award, with FOB origin terms, zero variance allowed in quantity, and inspection and acceptance occurring at the destination. The shipment must be sent to the DLA Distribution facility in New Cumberland, PA, under the parcel post address provided, and transportation instructions follow DLAD Proc Notes C19 and C20. The original required delivery date is October 27, 2026, with a needed ship date of February 1, 2027. The solicitation was issued under SPE8E9-26-T-3300 with a response deadline of August 17, 2026, and is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with covered defense information potentially applicable. The unit of issue is each (EA), and the contract falls under NAICS code 333998 with the Department of Defense as the contracting agency.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHICLE
Solicitation # SPE8EF-26-T-1575
This contract is for the procurement of 260 units of cargo vehicle tie-downs under the NSN 3990-01-619-7774 and part number 592736, issued by the Defense Logistics Agency through solicitation SPE8EF-26-T-1575. The requirement is set as a total small business set-aside, with delivery due 167 days after award, no later than February 1, 2027, and must be shipped FOB origin with zero variance in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be labeled and packaged according to MIL-STD-129, with palletization following DLA Packaging Requirements. The unit price is $260.00 per unit, totaling $67,600.00, and inspection and acceptance occur at the destination. The supplies are to be delivered to the DDSP New Cumberland Facility in Pennsylvania, with transportation governed by specific DLA procedural notes C19 and C20. Government identification must be removed from non-accepted supplies, and the contract incorporates provisions for covered defense information. The point of contact for inquiries is Russell Keiser, and the NAICS code is 333998.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE
Solicitation # SPE8E6-26-T-3991
The contract is for the procurement of two tube assemblies for a fire extinguishing system, identified by part number 65506-09014-042 and NSN 4210000895252, to be supplied by ROTAIR AIRCRAFT CORP to SIKORSKY AIRCRAFT CORP. The item must conform to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede commercial packaging standards such as ASTM D3951. All packaging and labeling must comply with MIL-STD-129 and DLA’s packaging requirements, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification and is subject to Covered Defense Information protocols. The supplier must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and the delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, with a required delivery date of February 1, 2027, and a lead time of 167 days from the contract award. The unit of issue is each, with a total contract value based on the specified quantity. The contract is issued under solicitation SPE8E6-26-T-3991 with performance directed to DLA Distribution in San Diego, California, and procurement is restricted due to proprietary or insufficient data for competitive bidding.
SAN DIEGO

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, FIRE EXTINGUIS
Solicitation # SPE8E6-26-T-4002
The contract is for 54 fire extinguisher brackets with NSN 4210-01-147-6483, designated as a critical application item, specifically designed for use with the ANSUL Sentry Model 2013, 20-pound dry chemical extinguisher. The item manufacturer is TYCO FIRE PRODUCTS LP with part number 30937, and it must be painted red. All supplies must comply with DLA packaging requirements and MIL-STD-2073-1E for preparation, including packaging method 10, dry climate control, and use of standard unit containers and intermediate containers. Packaging and marking must follow MIL-STD-129 with no special marking required. The contract prohibits the intentional addition of mercury or mercury-containing compounds in any hardware or supply, except for approved functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occur at destination, and the required delivery date is 76 days from the solicitation, with a need ship date of November 2, 2026, and original delivery date of November 4, 2026. The item is shipped to DLA Distribution at the New Cumberland facility in Pennsylvania, and transportation guidelines are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E6-26-T-4002, issued under a federal acquisition program with NAICS code 333998, and responses are due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIP, NOZZLE, FIRE HOS
Solicitation # SPE8E6-26-T-4004
The contract pertains to the procurement of a tip, nozzle, and fire hose assembly identified by NSN 4210010963447 and part number 20330001 from Akron Brass Company, with a total quantity of 35 units to be delivered within 64 days of contract award. The delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specified materials, methods, and markings, and palletization must adhere to DLA packaging requirements. All items must be free from intentional mercury or mercury-containing compounds, except for limited functional uses in approved devices such as batteries, fluorescent lights, or weapons systems, with mercury-containing portable items requiring dual containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements for compliance, and hazardous material shipping follows DLAD Proc Note C19, with delivery directed to the DDSP New Cumberland Facility in Pennsylvania. The original required delivery date is October 29, 2026, with a need ship date of October 21, 2026, under solicitation SPE8E6-26-T-4004, issued by the Department of Defense through the Defense Logistics Agency.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE8EF-26-T-1580
This contract is for the procurement of cargo tie-downs for vehicles under solicitation SPE8EF-26-T-1580, issued by the Defense Logistics Agency. The item, identified by NSN 3990-01-518-6574 and part number 15MTC/1748, is to be delivered in a quantity of four AY units with a delivery window of 167 days from the contract award. Delivery is FOB origin, and inspection and acceptance occur at the destination location. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization as outlined in the DLA Master List of Technical and Quality Requirements referenced by R-numbers. Marking must follow MIL-STD-129 with no special marking codes applied, and palletization must adhere to DLA standards. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with narrow exceptions for functional uses in batteries, instruments, weapon systems, and specified reagents, and requires mercury-containing portable lamps and instruments to have shockproof design and secondary containment in compliance with NAVSEA 5100-003D. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with an original required delivery date of July 19, 2027, though a need ship date of February 1, 2027, has been specified. The contract includes strict quality controls, government-mandated compliance with technical specifications, and transportation rules outlined in DLAD procedural notes.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
POINTER ASSEMBLY
Solicitation # SPE7M2-26-Q-0721
The contract is for the procurement of 14 units of a POINTER ASSEMBLY with NSN 1720-00-867-0084 under solicitation SPE7M2-26-Q-0721, issued by the Department of Defense’s Nuclear Reactor Program through the Defense Logistics Agency. The requirement mandates that the vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization, ensuring adherence to stringent cybersecurity standards. Technical and quality specifications referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition’s scale. The technical data associated with this item is subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States, and restricts distribution strictly to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Delivery is required within 250 days after delivery order issuance, with responses due by August 13, 2026. The point of contact for inquiries is Kyle Barr, reachable via email and phone provided, with all documentation accessible through the DIBBS portal.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 313210
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-4047
The contract pertains to the procurement of five fire extinguishers identified by NSN 4210-01-621-8544 and part number 218082389 under solicitation SPE8E6-26-T-4047, issued by the Defense Logistics Agency Distribution San Joaquin. Delivery is required within 167 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination facility in Tracy, California. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129, utilizing unit container code 10 and pack code U, with no special marking required. The extinguishers must be free of intentionally added mercury or mercury-containing compounds except for specific, approved uses such as in batteries, fluorescent lamps, sensors, or weapon systems as defined by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. The contract enforces strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The delivery window is set for February 1, 2027, with an original required delivery date of January 28, 2027, and no quantity variance is permitted. Hazardous material shipping must follow DLAD PROC NOTE C19 and C20, with the consignee identified as DLA Distribution San Joaquin at the Tracy warehouse address.
Broadwoven Fabric Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 316990
New
DIBBS
FLASHLIGHT
Solicitation # SPE8E7-26-T-3496
The contract specifies the procurement of 44 units of a flashlight with NSN 6230-01-618-0929 and part number 90513 from STREAMLIGHT INC, under solicitation SPE8E7-26-T-3496. Delivery is required within 10 days of the award date, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, particularly IP025, superseding ASTM D3951 unless the item is non-hazardous. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The item is not classified as hazardous under FED-STD-313, so commercial packaging per ASTM D3951 applies only if DLA requirements do not override it. The delivery address is W62G2T W1A8 DLA Dist San Joaquin, Tracy CA 95304-5000, with the original delivery deadline set for November 21, 2026, and a need ship date of August 28, 2026. Transportation and shipping instructions refer to DLAD Proc Notes C19 and C20. The contract’s unit price is $44.00 per unit, totaling $1,936.00, and the primary point of contact is Kelly Mitchell at Kelly.Mitchell@dla.mil. All technical and quality standards referenced are governed by the latest version of the DLA Master List effective on the solicitation issue date.
Other Leather and Allied Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING BLANKET, ELE
Solicitation # SPE8E8-26-T-5047
The contract is for the procurement of seven electric heating blankets identified by NSN 4520-01-708-1124 and part number T00233-5083-2 from Robertson Manufacturing Inc, with a unit price of $7.00 per unit and a total contract value of $49.00. Delivery is required FOB origin within 167 days from the contract award, with zero tolerance for quantity variance, and all items must be inspected and accepted at the destination. Packaging must comply with ASTM D3951 unless superseded by stricter requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must conform to MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement, with the Unit of Issue specified as each and the Quantity per Unit Pack set to 1. The shipment must be delivered to the designated receiving warehouse in Tracy, California, following DLA Transportation Procurement Notes C19 and C20. The original required delivery date is March 28, 2027, with a need ship date of February 1, 2027, under solicitation SPE8E8-26-T-5047, which was posted on August 5, 2026, and closed on August 17, 2026. The contracting agency is the Department of Defense, specifically DLA District San Joaquin, with Alexis Selby listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326111
New
DIBBS
FIREMEN'S TROUSER
Solicitation # SPE8E6-26-T-4041
The contract pertains to the procurement of Firemen's Trousers, identified by NSN 4210-01-545-6524 and part number GSADLA002000928820-44X32-PANT, with a requirement for 15 units delivered under solicitation SPE8E6-26-T-4041. The item is classified as a TYPE I (Code S) with a non-extendable shelf life of 60 months, subject to specific shelf-life marking requirements and compliance with MIL-STD-2073-1E packaging standards. Packaging must adhere to DLA’s procurement requirements, including MIL-STD-129 marking and palletization guidelines, with no tolerance for quantity variance—precisely 15 units must be delivered. Delivery is FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, California, and the required delivery window is 167 days from the contract date, with an original deadline of November 25, 2026, and a need ship date of February 1, 2027. The contract incorporates all referenced technical and quality requirements from the DLA Master List, and compliance is mandatory. The unit of issue is PR (pair), with a unit price of $15.00 and a total contract value of $225.00. Transportation and shipping instructions are governed by DLA Procurement Notes C19 and C20, and the items must be shipped to the designated receiving warehouse address in Tracy, CA. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 326111 for textile apparel manufacturing. The responsible contracting office is DLA Dist San Joaquin, with primary point of contact John Lieb. All supplies must be free of government identification if not accepted, and hazardous material packaging standards are applicable where relevant.
Plastics Bag and Pouch Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E7-26-T-3471
This contract outlines the procurement of a centrifugal fan with part number 0574300003M and NSN 4140011665049, issued by DLA District San Joaquin under solicitation SPE8E7-26-T-3471. The requirement specifies delivery of 14 units with a delivery timeframe of 167 days from contract award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. Strict compliance with DLA’s Master List of Technical and Quality Requirements, identified by R and I numbers, governs all technical and quality standards, superseding other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and unit of issue specified per contract. The fan must be free of intentionally added mercury or mercury-containing compounds, except for approved applications such as batteries, fluorescent lamps, sensors, or naval-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract permits no variance in quantity, with delivery required no later than February 1, 2027, and original delivery due by December 23, 2026. Only approved suppliers including LAU Industries Inc and United Refrigeration Inc are qualified, and all shipments must be addressed to the designated DLA receiving warehouse.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-4008
This contract calls for the procurement of 304 units of a portable fire extinguisher identified by NSN 4210-01-438-3933, with a unit price of $304.00 and a total contract value of $92,416. Delivery is required within two days of award, FOB destination, to the designated receiving warehouse in Tracy, California, with no variance allowed in quantity. The extinguishers must comply with MIL-STD-2073-1E packaging standards and be marked according to MIL-STD-129, with palletization following DLA packaging requirements. All packaging materials and methods must meet specific hazardous material handling guidelines under IP025, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product unless expressly exempted for functional components like batteries or sensors as permitted by NAVSEA. The extinguishers must be shipped in accordance with DLA transport notes C19 and C20, and the supplier must include approved Safety Data Sheets and Hazard Communication Standard-compliant labels as mandated by OSHA’s updated regulations since June 1, 2015. The supplier is also required to train employees on these safety documentation and labeling requirements. The solicitation is a total small business set-aside under NAICS code 314999, with responses due by August 17, 2026, and performance governed by DLA’s master list of technical and quality requirements referenced by R and I numbers.
All Other Miscellaneous Textile Product Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, CENTRIFUG
Solicitation # SPE8E7-26-T-3494
This contract specifies the procurement of a centrifugal fan impeller identified by part number ES9500-6354, with an approved source code of 0V5R4 under Snowbird Technologies Inc. The item is governed by technical and quality requirements from the DLA Master List, which take precedence over all other standards including ASTM D3951, and must be packaged and labeled in strict compliance with MIL-STD-129 and DLA packaging guidelines as outlined in RP001. The part is tied to a specific drawing revision A dated 10/20/2011 and is associated with the government NSN 4140015924133. The contract requires delivery of ten units FOB origin with zero allowable variance in quantity and inspection and acceptance to occur at the destination warehouse in Tracy, California. Packaging must conform to ASTM D3951 unless overridden by higher-priority DLA requirements, and all units must be palletized per DLA specifications. The delivery timeline mandates fulfillment within 124 days, with an original required delivery date of January 12, 2027, and a need ship date of December 20, 2026. The contract is issued under solicitation SPE8E7-26-T-3494 with a unit price of $10 per unit and a total value of $100. Transportation and shipping logistics are governed by specific DLA procedural notes, and all documentation and labeling must adhere to government protocols including the removal of government identification from non-accepted items. The point of contact for procurement inquiries is Kelly Mitchell of the Department of Defense, DLA District San Joaquin.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339950
New
DIBBS
PLATE, INSTRUCTION
Solicitation # SPE8E6-26-T-4069
This contract pertains to the procurement of a PLATE, INSTRUCTION with NSN 9905-14-398-3767 and part number ZB2-BY2101, under solicitation SPE8E6-26-T-4069. A total quantity of 136 units is required, delivered FOB origin with no variance allowed in quantity, and must be delivered within 167 days from the award date. The item is classified as a critical application and is subject to strict technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item except under narrowly defined exceptions such as functional use in batteries, fluorescent lights, sensors, weapon systems, or specific chemical reagents authorized by NAVSEA, with portable fluorescent lamps and instruments containing mercury requiring shock-proof construction and a secondary containment barrier in accordance with NAVSEA 5100-003D. All packaging and palletization must comply with DLA Packaging Requirements for Procurement, and the item must be delivered to the designated接收 warehouse in Tracy, California, with no special marking required beyond standard compliance. The contract stipulates that inspection and acceptance occur at the destination, and transportation logistics are governed by DLA procedural notes C19 and C20. The delivery timeline allows for an original required delivery date of June 7, 2027, with a need ship date of February 1, 2027, indicating a planned lead time for production and readiness. Unit price is set at $136.00 per unit with no line item price adjustments permitted. The procurement follows DoD authorized units of issue and references the ANSI X12 unit of issue through a specified DLA link. The contracting agency is DLA Dist San Joaquin under the Department of Defense, with Brett Scull as the primary point of contact. Solicitation closed on August 17, 2026, and the NAICS code 339950 identifies the industry classification as other miscellaneous manufacturing. The contract also mandates removal of government identification from non-accepted supplies and incorporates all applicable technical and quality requirements via referenced R and I numbers from the DLA Master List, with revision control dependent on acquisition type and amendment dates.
Sign Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335122
New
DIBBS
FIXTURE, LIGHTING
Solicitation # SPE8E7-26-T-3515
The contract pertains to the procurement of a lighting fixture identified by part number FLC217 and NSN 6210-01-596-7680, with a requirement for 38 units at a unit price of $38.00, totaling $1,444.00. Delivery is specified as FOB origin with a delivery window of 167 days from the contract award, and the destination for both inspection and acceptance is the DLA Distribution San Joaquin receiving warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit packaging as outlined in the contract, with marking following MIL-STD-129 and no special marking codes applied. Palletization must adhere to DLA’s packaging requirements, and transportation logistics are governed by DLAD procedural notes C19 and C20. The contract references technical and quality standards from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The solicitation number is SPE8E7-26-T-3515, issued by the Department of Defense under NAICS code 335122, with a response deadline of August 17, 2026, and a required ship date of February 1, 2027, overriding the original delivery requirement of September 9, 2026. The unit of issue is each (EA), and quantity variance is strictly zero percent.
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE8E6-26-T-4068
This contract pertains to the procurement of a nonmetallic hose assembly with the NSN 4210-01-707-7372 and part numbers 20-100MF50 and FE20-100MF50, requiring a quantity of 16 units identified by the unit of issue AY. The item has a strict non-extendable shelf life of 180 months as specified under RS039 and must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 marking requirements, with no special marking codes applied. The hose assembly is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all documentation must adhere to DLA’s source approval and packaging protocols. Delivery is FOB origin with an 80-day lead time, and acceptance occurs at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. The contract specifies a zero percent variance in quantity and requires the supplier to meet the original required delivery date of December 17, 2026, with a needed ship date of April 13, 2026. Transportation and shipping instructions are governed by DLA procedural notes C19 and C20, and unit of issue conversions must align with the DLA-provided ANSI X12 standard. The solicitation number is SPE8E6-26-T-4068, issued by DLA District San Joaquin under the Department of Defense, with primary point of contact John Lieb.
All Other Miscellaneous Textile Product Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
INSERT, CUTTING TOOL
Solicitation # SPE8E5-26-T-3828
The contract is for the procurement of 621 units of an insert cutting tool with NSN 3455-01-624-4511 and part number TCMT-32.51-PEM-DPC25UT, issued under solicitation SPE8E5-26-T-3828 by DLA Dist San Joaquin. The unit price is $7017757297 per unit, totaling a contract value based on the specified quantity, with delivery required within 167 days from the award date, FOB origin. The delivery destination is DLA Warehouse 57 in Tracy, California, with inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951, but DLA Master List of Technical and Quality Requirements take precedence, and marking and labeling must follow MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement. The product must be delivered no later than February 1, 2027, with an original required delivery date of January 13, 2027, and no variance in quantity is permitted. Transportation logistics are governed by DLAD Proc Note C19 for transportation and C20 for first destination. The contractor is Dorian Tool Intl Inc, and the point of contact is Khue Nguyen. The requirement is tied to NAICS code 333515 and is a federal solicitation issued by the Department of Defense, with responses due by August 17, 2026.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
Solicitation # SPE8E5-26-T-3795
The contract is for the procurement of welding electrodes under NSN 3439-01-039-3494, with a quantity of 198 cartons, issued through solicitation SPE8E5-26-T-3795 by the DLA San Joaquin office under the Department of Defense. The requirement is classified as fully competitive and governed by military or federal specifications, with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and the applicable revision is determined based on the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA requirements, and non-accepted supplies must have all government identification removed prior to return. No shelf life restrictions apply to the material. The delivery timeline is set at 157 days after order placement, with the solicitation posted on August 5, 2026, and responses due by August 17, 2026. The NAICS code 333992 indicates this falls under Other Fabricated Metal Product Manufacturing. Performance is to occur in Tracy, California, with a zip code of 95304-5000. Primary point of contact is Ira Hedgepeth, reachable via phone and email provided. The solicitation is published on the DIBBS platform, and no set-aside preferences are indicated, meaning the opportunity is open to all eligible vendors without restriction.
Welding and Soldering Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details