Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HEATER, THERMAL RELEASE

Active
SPE7M0-26-T-065BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of two thermal release heaters under NSN 5999-01-123-2725. The contract requires a rapid delivery turnaround of five days after receipt of order. The primary point of contact for this requirement is Gerard Quinn. Compliance with DLA packaging requirements and specific technical and quality standards is mandatory, as outlined in the DLA Master List. Key regulatory requirements include the physical identification of bare items and the removal of government identification from any non-accepted supplies. Additionally, alternate offerors must provide a complete data package for both approved and alternate parts to be considered.

General Info

DoD procurement of two thermal release heaters with five-day rapid delivery requirement.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-065B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUSA
Contacts
Gerard Quinn
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEATER,THERMAL RELEASE
HEATER,THERMAL RELE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5999-01-123-2725 Quantity: 2 EA Purchase Request: 7018112966QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-5039
This contract is for the procurement of seven power supply units, identified by NSN 6130-01-735-7719 and part number A10-0498-001 from L3Harris Technologies, Inc. The agreement is managed by the DLA Distribution San Joaquin under solicitation number SPE7L7-26-T-5039. Delivery is required within 274 days, with a specified need date of June 12, 2027, and shipping is designated as FOB Origin with inspection and acceptance occurring at the destination in Tracy, California. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards and MIL-STD-129 for marking. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Additionally, the supplier must comply with regulations regarding the removal of government identification from non-accepted supplies and the protection of covered defense information.
DLA DIST SAN JOAQUIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-5038
This contract is for the procurement of two power supply units, identified by NSN 6130-01-644-2625 and part numbers from Leidos, Inc. and XP Power LLC. The agreement specifies a delivery timeframe of 194 days after order, with a required delivery date of March 24, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the supplier must comply with CMMC Level 2 self-assessment and covered defense information requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional cases approved by NAVSEA.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-5032
This solicitation, issued by the Department of Defense for the DDSP New Cumberland Facility, is for the procurement of two power supply units under NSN 6130-01-548-3344. The contract is designated as a Total Small Business Set-Aside and requires delivery within 188 days after the order is placed. The agreement mandates strict adherence to DLA packaging requirements and the protection of covered defense information. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional components like batteries or sensors. Additionally, the successful offeror must provide a complete data package for both approved and alternate parts.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A7-26-T-702V
This contract is for the procurement of red-orange electrical insulation tape conforming to MIL-I-22444C, with specifications of 1 inch width and a thickness between 0.015 and 0.020 inches. The item is designated as a critical application item with a non-extendable shelf life of 12 months. The order consists of one roll to be delivered FOB Origin within 80 days after the order. The supplier must adhere to ISO 9001:2015 quality standards and follow specific DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. A mandatory first article test is required, involving a 100 percent dimensional characteristics check on two items produced at the actual production facility. Inspection and acceptance will occur at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
BATTERY, JUMP START
Solicitation # SPE7L7-26-T-5034
This contract is for the procurement of 12 jump start batteries, identified as commercial items with AGM chemistry and part number 746X705 from Pulsetech Products Corporation. The items are subject to a non-extendable shelf life of 24 months and require the submission of MSDS/PSDS documentation per FED-STD-313. The order is designated as a total small business set-aside under NAICS code 335999. Delivery is required within 136 days, with a need ship date of January 25, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, hazardous materials shipping standards, and MIL-STD-129 marking. Specific restrictions are placed on the use of mercury, and the items must be packaged and palletized according to RP001 and IP025 standards.
DLA DIST SAN JOAQUIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A7-26-T-702Z
This contract is for the procurement of electrical insulation tape, identified as a critical application commercial item under NSN 5970-01-012-4280. The requirement is for one roll, with each unit containing 36 yards, adhering to technical specifications A-A-59474D. The item has a 12-month extendable shelf life and must comply with specific DLA packaging, marking, and quality requirements, including the prohibition of mercury compounds in preservation and packaging. Delivery is required within 20 days, with the FOB, inspection, and acceptance points all set at the origin. Shipping must be handled via traceable means to the designated receiving office at Joint Base MDL in New Jersey. The contract specifies a zero percent quantity variance and mandates compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
INSULATOR, BUSHING
Solicitation # SPE4A6-26-T-24XJ
This contract, identified as SPE4A6-26-T-24XJ, is a solicitation by the Department of Defense ASC Commodities Division for the procurement of bushing insulators, part number 5607-56, under NSN 5970013962084. The requirement consists of two line items, each for a quantity of 3 units, totaling 6 units. Delivery is required within 5 days after receipt of order, with shipping designated as FOB Origin and delivery to Tinker AFB in Oklahoma. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, and requires palletization according to RP001. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The original required delivery dates are set for August 21 and August 24, 2026.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
ADAPTER, BATTERY CHARGE
Solicitation # SPE7L7-26-T-5035
This contract is for the procurement of 62 battery charger adapters, identified as National Stock Number 6130017069251 and part number BTA-70100-148 by Bren-Tronics Defense LLC. The item is classified as a Commercial Off The Shelf product. Delivery is required within 113 days, with a specified need date of January 2, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quality and technical compliance are governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for the removal of government identification from non-accepted supplies and physical item marking. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformance required for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
NUT, SLEEVE
Solicitation # SPE4A6-26-T-24VP
This contract is for the procurement of 63 sleeve nuts with retainer rings, identified as part number MS18029-21 and NSN 5310009075939. The item is classified as a commercial critical application item and must adhere to basic specification MS18029E. Delivery is required within 108 days, with a required delivery date of August 28, 2026, shipped FOB origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including SAE AS9100 standards for manufacturers. Quality assurance involves inspection and acceptance at the origin using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE4A6-26-T-24XK
This contract is for the procurement of one electrical solenoid, identified by NSN 5945-99-253-0797 and Honeywell Aerospace part number 2536W060, in accordance with AF drawing 8148650. The order is managed by the ASC Commodities Division of the Department of Defense under solicitation SPE4A6-26-T-24XK, with a required delivery date of August 7, 2026, and a delivery timeframe of five days after order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per RP001 and MIL-STD-2073-1E, and marking requirements per MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Quality assurance will be conducted via sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Shipment must be made via the fastest traceable means to Tinker AFB, Oklahoma, and the use of parcel post is prohibited.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M5-26-T-452T
This contract is for the procurement of one electrical solenoid, identified by NSN 5945015484855 and part number 121220A02 from Hoshizaki America Inc. The order is managed under solicitation SPE7M5-26-T-452T with a required delivery date of February 9, 2026, and a delivery timeframe of 20 days after order. Shipping is designated as FOB Destination to the USS Oregon SSN 793, and the contractor must use traceable shipping means rather than parcel post. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, including specific IPC/JEDEC J-STD-609 markings for component lead finish. Environmental restrictions are in place, prohibiting the intentional addition of mercury or the use of Class I ozone-depleting substances unless written approval is granted. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the delivery.
ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-24PH
This contract is for the procurement of Type I, Class 2 electrical insulation tape, identified by NSN 5970-00-139-5157. The required item features a width of 0.750 inches, a length of 1296.0 inches, and a 3.00 inch inner core. The order consists of one roll, defined as 108 feet, and is classified as a critical application commercial item with a 12 month extendable shelf life. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Delivery is set for 10 days after order, with FOB, inspection, and acceptance points all located at the origin. The shipment is destined for the Texas Army National Guard AASF 1 in Del Valle, Texas.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 334513
New
DIBBS
SWITCH, LIQUID LEVEL
Solicitation # SPE7M0-26-T-064Z
This contract is for the procurement of two liquid level switches, identified by NSN 5930011374705 and associated with Setra Systems part numbers 34599 and LS-34768-1. The order is managed under solicitation number SPE7M0-26-T-064Z for the Department of Defense. Delivery is required within five days, with the shipment destined for the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions such as sensors or weapon systems as specified by NAVSEA. Inspection and acceptance will take place at the point of origin, and the contract specifies a zero percent quantity variance.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M0-26-T-064G
This contract is for the procurement of 19 units of tube elbows under solicitation number SPE7M0-26-T-064G for the Department of Defense. The items must adhere to technical specifications MS51820-30S and MIL-DTL-18866K(1), with a strict prohibition on the use of Class I ozone depleting chemicals. The order is subject to DLA packaging requirements and MIL-STD-129 marking standards, with a delivery timeline of five days after order. The contract is conducted under full and open competition with a delivery term of FOB Origin. Inspection and acceptance will also occur at the origin. Shipping is coordinated through the Australian Government Cargo Office in California for final delivery to the Joint Logistics Unit in Bandiana, Australia. The material does not have a shelf life requirement and must comply with configuration change management and covered defense information protocols.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER BODY, FLUID
Solicitation # SPE7M0-26-T-065D
This contract, identified as SPE7M0-26-T-065D, is for the procurement of one fluid filter body, part number 870624680 by Alfa Laval Inc, under NSN 4330011568434. The item is designated as a critical application item and must be delivered within five days. The shipment is destined for the General Depot of Naval Supplies in Kaohsiung City, Taiwan, with FOB origin terms for both inspection and acceptance. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required for specific systems. Technical and quality requirements are governed by the DLA Master List, and the required delivery date is set for September 2, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
SLEEVE, SHAFT, PUMP
Solicitation # SPE7M0-26-T-064W
This contract is for the procurement of one pump shaft sleeve, part number 659C0674J028A from Circor Naval Solutions LLC, intended for use on Type 10 DBN centrifugal Warren pumps. The item is identified by NSN 4320011977121 and is subject to specific DLA packaging and quality requirements, including compliance with MIL-STD-2073-1E and MIL-STD-129. Final inspection and acceptance must occur at the actual manufacturing facility, requiring a technical inspection where the contractor provides all necessary drawings and technical data to verify requirements. The delivery is set as FOB Origin with a required delivery date of September 2, 2026, and a delivery window of five days. The shipment is destined for the General Depot of Naval Supplies in Kaohsiung City, Taiwan.
Fluid Power Pump and Motor Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7M0-26-T-063M
This solicitation, issued by the Department of Defense under the Maritime Supply Chain ESOC Buys, is for the procurement of one straight shaft, identified by NSN 3040-01-491-2835. The contract requires a delivery timeframe of five days after receipt of order and is managed under solicitation number SPE7M0-26-T-063M. Performance is centered in Portsmouth, Virginia, with the primary point of contact being Abaigael Masterson. The contract includes stringent regulatory and technical requirements, most notably the need for CMMC Level 2 certification and compliance with Covered Defense Information standards. It mandates adherence to DLA packaging requirements and strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification. Additionally, the provider must follow specific configuration change management protocols and ensure the removal of government identification from any non-accepted supplies.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
STATOR, GENERATOR
Solicitation # SPE7M0-26-T-063Z
This contract is for the procurement of one generator stator, identified by NSN 6115017336200, under solicitation number SPE7M0-26-T-063Z. The item is designated as a critical application item and is associated with part numbers from Mecc Alte Inc, Essex Electro Engineers Inc, and Brighton Cromwell LLC. The delivery is required within five days after receipt of order, with a required delivery date of August 24, 2026. The agreement specifies that shipping is FOB Origin, with inspection and acceptance occurring at the destination. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The item is to be delivered to the Marine Aviation Logistics Squadron 16 in San Diego, California, via the fastest traceable means, specifically prohibiting the use of parcel post.
Motor and Generator Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE7M0-26-T-064N
This contract is for the procurement of two sleeve bushings, identified by NSN 3120014808540 and associated with Curtiss-Wright Flow Control Corporation part numbers NY6345-25-0250 and PL-43616. The order is managed under solicitation SPE7M0-26-T-064N for the Maritime Supply Chain ESOC Buys within the Department of Defense. Delivery is required within five days of order, with the final destination being the Puget Sound Naval Shipyard in Bremerton, Washington. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Item Unique Identification is not required for this request. Shipping must be handled via the fastest traceable means, and parcel post is explicitly prohibited.
Ball and Roller Bearing Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M0-26-T-063E
This contract is for the procurement of four circuit breakers, identified by NSN 5925013894444 and Eaton Corporation part number BAB2060. The order is issued by the Department of Defense under solicitation SPE7M0-26-T-063E, with a required delivery date of August 27, 2026, and a delivery timeframe of five days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to DLA packaging requirements RP001 and MIL-STD-129 for marking and labeling. Hazardous materials must be packaged per TQ requirement IP025, while non-hazardous items follow ASTM D3951. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Delivery is directed to the USA DEP Tobyhanna facility in Pennsylvania via the fastest traceable means.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M0-26-T-063C
This contract is for the procurement of two nonmetallic hoses, identified by NSN 4720012834570 and Deutz Corporation part number 140 0708. The items are designated as critical application items and must be delivered within five days of order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically Fort Rucker, Alabama. The supplier must adhere to DLA packaging requirements and ASTM D3951, with all marking and labeling following MIL-STD-129. A strict prohibition is placed on the use of Class I ozone depleting chemicals in the production of these items. The contract is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys, with a required delivery date of August 27, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M0-26-T-063K
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of one fixed thermal resistor under part number 5905-01-272-8875. The contract requires a rapid delivery turnaround of five days after receipt of order. The procurement is governed by NAICS code 334416 and is managed by primary point of contact Laurie Wassmuth. Compliance with specific DLA packaging and quality requirements is mandatory, including adherence to technical standards found in the DLA Master List and strict guidelines for physical item marking and the removal of government identification from non-accepted supplies. Because no existing data is available, the alternate offeror must provide a comprehensive data package for both the approved and alternate parts. The response deadline for this solicitation is September 10, 2026.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M0-26-T-063W
This contract is for the procurement of electrical receptacle connectors, specifically part number MS3464E27-50P under NSN 5935014886227. The requirement consists of two line items, each for a quantity of one unit. The items are qualified products that must adhere to the Qualified Products List for Federal Stock Class 5935 and comply with technical standards SAE AS34641 Revision B and reference non-government standard AN106001 through AN106100 Revision 3. Delivery is required within five days after order, with the original required delivery date set for August 27, 2026. Shipping is FOB Origin, and the destination for both inspection and acceptance is ASD Oceana in Virginia Beach, Virginia. Packaging must comply with DLA requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous materials. All shipments must be sent via the fastest traceable means, and the use of parcel post is prohibited.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DUST
Solicitation # SPE7M0-26-T-045Y
This contract, identified as SPE7M0-26-T-045Y, is for the procurement of 996 protective dust and moisture seal covers, part number OFM-2988-A1 and NSN 5340016091655. The order is issued by the Department of Defense Maritime Supply Chain ESOC Buys with a required delivery date of March 4, 2027, and a delivery timeframe of 187 days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including the prohibition of Class I ozone depleting chemicals. Packaging must comply with MIL-STD-129 and RP001, with specific instructions to use ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. The contract specifies a zero percent quantity variance and requires all government identification to be removed from any non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 3 days
View Details