Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HEATER, THERMAL RELEASE

Active
SPE7M5-26-T-449LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-449L, is for the procurement of one thermal release heater, identified by NSN 5999-00-422-8474. The contract requires delivery within 20 days after receipt of the order to a performance location in FPO 96661. Responses must be submitted by September 8, 2026. The agreement is subject to specific DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies and strict physical item marking standards. Because no existing data is available for the part, any alternate offeror must provide a comprehensive data package covering both the approved and alternate parts. Primary coordination for this requirement is managed by Margaret Smith.

General Info

DoD seeks one thermal release heater by September 8, 2026, for FPO 96661.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

UNIT 100166 BOX 1, FPO, AP, 96661, USA

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-449L Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEATER,THERMAL RELEASE
HEATER,THERMAL RELEASE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5999-00-422-8474 Quantity: 1 EA Purchase Request: 7018054963QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
STUFFING TUBE
Solicitation # SPE7M2-26-T-6534
This contract is for the procurement of five stuffing tubes under solicitation SPE7M2-26-T-6534 for the Department of Defense. The items must be manufactured from HY80 alloy steel and adhere to specific technical drawings and military specifications, including MIL-S-24235. A critical requirement of this contract is the strict prohibition of mercury or mercury-containing compounds in the hardware, preservation, packaging, and marking. The agreement mandates a First Article Test (FAT) in accordance with MIL-STD 831, with inspection and acceptance occurring at the origin. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, with delivery destined for the DLA Distribution center in New Cumberland, Pennsylvania. The required delivery date for the primary quantity is April 21, 2027, with a delivery lead time of 317 days.
NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION B
Solicitation # SPE7M2-26-T-6557
This contract is for the procurement of 20 sectional terminal junction blocks under solicitation SPE7M2-26-T-6557 for the Nuclear Reactor Program. The items are identified by NSN 5940014851763 and part number M81714/17-D33, and are classified as critical application items. The supplier must adhere to the Qualified Products List or Qualified Manufacturers List and comply with technical and quality requirements RA001, RP001, RQ002, and RQ011. Delivery is required within 61 days, with a need ship date of November 9, 2026, and a final delivery date of December 18, 2026. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, packaging, and marking, except where specifically allowed for functional components. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.
NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, MARKER, CLEARA
Solicitation # SPE4A6-26-T-23YN
This contract is for the procurement of one clear marker light, identified by NSN 6220017225822 and part number 30086Y from Truck-Lite Co., LLC. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-23YN, with a required delivery date of June 29, 2026, and a delivery window of 20 days. The item is designated as a critical application item and must be shipped FOB Origin to the Naval Construction Group One in Port Hueneme, California, using the fastest traceable means. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. Inspection and acceptance will occur at the destination, and the supplier must comply with all specified physical identification and government marking removal requirements.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE7M2-26-T-6537
This contract is for the procurement of 24 rolls of white electrical insulation tape, measuring 1 inch in width, with a unit of issue of 108 feet per roll. The item is identified by NSN 5970-01-292-6948 and part number G565 from Saint-Gobain Performance Plastics Corp. This is designated as a critical application item with a non-extendable shelf life of 18 months. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods under MIL-STD-1916 or ASQ H1331 and a prohibition on the intentional addition of mercury. Delivery is set for 216 days after order, with shipping destined for DLA Distribution Jacksonville. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement.
NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
MOUNTING BASE, TIEDO
Solicitation # SPE4A7-26-R-0742
The solicitation for Mounting Base, Tiedo ATF under contract number SPE4A726R0742 is a presolicitation issued by the Defense Logistics Agency Aviation, with a firm fixed price structure for a quantity of 4,800 units, delivered FOB origin with inspection and acceptance at destination. The item is critical to application and only two approved sources are recognized: General Dynamics Mission Systems, Inc. with part number 86-1326374-2 and Panduit Corp with part number ABM2S-S6-D. The final award will consider price, past performance, and other evaluation criteria detailed in the complete solicitation. The solicitation will be publicly accessible via the DLA Internet Bid Board System on or around August 18, 2026, with responses due by September 18, 2026, and will only be available in PDF format requiring Adobe Acrobat Reader. The NAICS code is 335999, and the place of performance is in Richmond, Virginia, with primary point of contact Angela Haden and secondary contact Leslie Adams. The posting date is August 5, 2026, and the response deadline listed in the data is August 17, 2026, at 6:30 PM EST.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
DIBBS
LAMP, LIGHT EMITTING DI
Solicitation # SPE4A5-26-T-375P
DLA Aviation is soliciting quotes for the procurement of two light emitting diode lamps under NSN 6220016944034. This request for quotation, identified by solicitation number SPE4A526T375P, specifies an approved source of 72914 72325519-1. The items are to be delivered to DLA Distribution within 280 days after the order is placed. The solicitation was posted on August 18, 2026, with a response deadline of August 26, 2026. All quotes must be submitted electronically via the provided system, as hard copies and detailed specifications or drawings are not available. Interested and responsible sources are encouraged to submit their quotes by the deadline to be considered for the award.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-5018
This contract is for the procurement of four wet charged lead acid storage batteries, identified by NSN 6140017189807 and Deere and Company part number TY25881B. The items are designated as critical application items and must adhere to a shelf life of 60 months. Delivery is required within 276 days to the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of June 12, 2027. The supplier must comply with various DLA technical and quality requirements, including specific packaging, marking, and shipping standards for hazardous materials. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331. Additionally, the contract mandates strict adherence to mercury restrictions and hazardous communication standards, with all marking and palletization following MIL-STD-129 and RP001 guidelines.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
CONNECTOR, PLUG, FIBER O
Solicitation # SPE7M2-26-T-6548
This contract is for the procurement of 20 fiber optic plug connectors, identified by NSN 6060-01-653-7640 and part number M28876/7B12S1. The items must comply with MIL-PRF-28876/7F Revision F and are subject to the Qualified Products List or Qualified Manufacturers List. Delivery is required within 301 days, with a requested ship date of July 7, 2027, and a final delivery date of September 22, 2027. The shipment is destined for the DLA Distribution New Cumberland facility in Pennsylvania, with FOB Origin terms and destination inspection and acceptance. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting substances unless written approval is granted. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331. Technical and quality requirements are further governed by the DLA Master List and specific configuration change management protocols.
NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-24EH
This contract is for the procurement of electrical insulation tape, identified as a commercial off the shelf item and a critical application item. The specific product is manufactured by 3M Company, part number 92 1/4IN, with NSN 5970-01-099-8567. The order consists of 8 rolls, with each roll containing 180 feet of tape. This item is subject to a non-extendable shelf life of 18 months. The agreement specifies a delivery timeframe of 5 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract is managed by the ASC Commodities Division of the Department of Defense, with the place of performance located at Hill AFB.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-5016
This contract is for the procurement of 10 battery chargers, identified by NSN 6130-01-619-7626 and part number FH-32-A from Teledyne FLIR Defense, LLC. The order is managed by the Department of Defense through DLA Distribution Red River in Texarkana, Texas, with a required delivery date of December 21, 2026, and a delivery timeframe of 103 days after order. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment, DLA packaging requirements, and specific mercury-free constraints. Quality assurance will be conducted via sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, ensuring all items are marked and labeled according to federal specifications.
RED RIVER RECEIVING BLDG

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-5017
This contract is for the procurement of 20 battery chargers, identified as commercial items with part number BTC-70903-MR1 and NSN 6130-01-658-8523. The order is managed under solicitation SPE7L7-26-T-5017 with a required delivery date of January 19, 2027, and a delivery window of 132 days. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Quality assurance will be conducted using sampling methods per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required for batteries or specific sensors, and requires compliance with covered defense information protocols.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE7M0-26-T-062H
This contract, identified as SPE7M0-26-T-062H, is for the procurement of 300 rolls of electrical insulation tape under NSN 5970-01-013-9369. Each roll is defined as 66 feet in length. The item is classified as a critical application item with a non-extendable shelf life of 18 months. Delivery is required within 5 days after receipt of order, with the destination serving as the point for both inspection and acceptance. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. The contract incorporates various technical and quality requirements from the DLA Master List and specifies that the item must be delivered FOB Destination.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-449V
This contract is for the procurement of six electrical plug connectors, identified by NSN 5935014601304 and part number D38999/26JH21PN. The items are classified as critical application items and must adhere to the Qualified Products List for connector assemblies and electrical contacts, specifically following MIL-DTL-38999N and MIL-DTL-38999/26G specifications. Delivery is required within 20 days of order, with the final destination being the Naval Air Warfare Center Air Division in Patuxent River, Maryland. The contractor must comply with DLA packaging requirements, including MIL-STD-129 for marking and labeling, and ensure that all technical and quality requirements from the DLA Master List are met. Shipping must be handled via the fastest traceable means, and parcel post is strictly prohibited.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITA
Solicitation # SPE7M5-26-T-449N
This contract is for the procurement of 20 units of unprogrammed one-time programmable digital microcircuits under NSN 5962-01-318-3782. The acquisition is governed by Federal Supply Class 5962 and requires the supplier to be on the Qualified Suppliers List of Distributors or Qualified Testing Suppliers List. Delivery is specified as 160 days after order, with a required delivery date of June 3, 2027, shipping FOB Origin to DLA Distribution DDWO in Columbus, Ohio. Strict compliance is required regarding supply chain traceability and quality assurance. Contractors must submit DLA Land and Maritime Form 918 and all supporting traceability or test documentation via email at least 15 days before the delivery date and must receive written authorization from the contract administrator before shipping. Additionally, the items must meet rigorous packaging standards, including MIL-PRF-81705 for ESD and EMI protection, and adhere to IPC/JEDEC J-STD-609 for lead finish marking. Failure to provide correct documentation or ship without authorization may result in the government withholding payment.
Semiconductor and Related Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, BULKHEAD,
Solicitation # SPE7M5-26-T-449M
This solicitation from the Department of Defense Active Devices Division is for the procurement of six electrical bulkhead connectors under NSN 5935-01-693-9269. The contract is designated as a Total Small Business Set-Aside under NAICS code 334417, with a required delivery timeframe of 160 days after the order date. Performance is centered in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and cybersecurity standards, specifically requiring CMMC Level 2 certification and compliance with Covered Defense Information regulations. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Additional requirements include specific physical item marking and the removal of government identification from non-accepted supplies.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-26-T-388Z
This contract is for the procurement of 14 electromagnetic relays under solicitation number SPE7M5-26-T-388Z for the Department of Defense. The items must adhere to specific technical standards, including MIL-PRF-6106/39G and MIL-PRF-6106R, and are designated as critical application items. Delivery is required within 168 days, with a required delivery date of February 3, 2027, shipping FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The contractor must comply with DLA packaging requirements and MIL-STD-129 marking standards. Specifically, the items require unit package marking for component lead finish in accordance with IPC/JEDEC J-STD-609 to identify lead or lead-free attributes. Inspection and acceptance will take place at the destination, and the contract allows for zero quantity variance.
Relay and Industrial Control Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M5-26-T-449Q
This contract is for the procurement of 448 electrical contacts, identified by NSN 5999010236992 and Amphenol Canada Corp part number 482-92. The solicitation, numbered SPE7M5-26-T-449Q, is issued by the Department of Defense Active Devices Division and is designated as a Total Small Business Set-Aside. Delivery is required within 107 days, with a need ship date of September 7, 2026, and an original required delivery date of March 2, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, including RP001 and MIL-STD-129, with specific instructions for hazardous and non-hazardous materials. It prohibits the use of Class I ozone-depleting substances in manufacturing or testing without written approval from the contracting officer. All items must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific mandates for physical identification and the removal of government identification from non-accepted supplies.
Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-Q-0809
This solicitation is for the procurement of 514 connector adapters, identified by NSN 5935-01-443-9965, for the Department of Defense Active Devices Division. The contract is a total small business set-aside under NAICS code 334417, with a delivery requirement of 156 days after receipt of order. Performance is located in Anniston, Alabama, and the response deadline is September 11, 2026. The agreement mandates strict adherence to source-controlled drawings and DLA packaging and quality requirements. Key compliance standards include CMMC Level 2 certification for third-party assessment and rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334419
New
DIBBS
STRIP, ELECTRICAL GROUN
Solicitation # SPE7M5-26-T-449P
This contract, identified as SPE7M5-26-T-449P, is for the procurement of three electrical grounding strips with the National Stock Number 5999-01-735-7581 and part number 12045-4418-A12 from L3Harris Technologies, Inc. The order is managed by the Department of Defense under the Active Devices Division, with a required delivery date of April 29, 2027, and a delivery timeline of 232 days after the order. The agreement specifies that delivery is FOB Origin, with inspection and acceptance occurring at the destination. Shipping and palletization must adhere to MIL-STD-129 and DLA packaging requirements, with the final destination being DLA Distribution San Joaquin in Tracy, California. Technical and quality standards are governed by the DLA Master List, specifically including requirements for the removal of government identification from non-accepted supplies and physical item marking.
Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334310
New
DIBBS
CUSHION, EAR
Solicitation # SPE7M5-26-T-449Z
This solicitation, issued by the Department of Defense Active Devices Division, is for the procurement of ear cushions under NSN 5965-01-554-2388. The contract requires a total quantity of 40 packages, with each package containing two units. Delivery is mandated within 20 days after receipt of the order, and the place of performance is located in Minneapolis, Minnesota. The agreement incorporates specific DLA packaging requirements and mandates the removal of government identification from any non-accepted supplies. It also adheres to covered defense information standards and technical quality requirements as outlined in the DLA Master List. Offerors providing alternate parts must submit a complete data package for approval. The solicitation was posted on August 27, 2026, with a response deadline of September 8, 2026.
Audio and Video Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
DUMMY CONNECTOR, REC
Solicitation # SPE7M5-26-T-449H
This contract is for the procurement of one dummy connector, receiver, identified by NSN 5935011277631. The item is associated with Amphenol Corp part number 10-427405-133 and Lockheed Martin Corporation part number C3558-13. The delivery is required within 20 days, with a required delivery date of August 25, 2026, shipping FOB origin to Ellsworth AFB in South Dakota. The agreement mandates strict adherence to DLA packaging and quality requirements, specifically RP001, RA001, RQ011, and RQ017. Packaging must comply with MIL-STD-129 and ASTM D3951, with specific instructions for hazardous materials under TQ requirement IP025 if applicable. Inspection and acceptance will take place at the destination, and shipments must be sent via the fastest traceable means rather than parcel post.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-T-449Y
This contract is a solicitation for the procurement of five connector adapters, identified by NSN 5935-00-926-0702 and part number MS3119E14-12. The items must adhere to technical specifications MIL-DTL-26482J(2) and MS3119E(2), and are designated as qualified items under the Qualified Products List for connector assemblies and electrical contacts. The order is managed under purchase request 7017744244 with a required delivery date of March 5, 2026, and a delivery timeframe of 10 days after order. Shipping is designated as FOB Origin with inspection and acceptance occurring at the destination. The items are to be delivered to the 160th Aviation HQ HHC Special Operations at Fort Campbell, Kentucky. Packaging must comply with DLA requirements, specifically MIL-STD-129 and ASTM D3951 for non-hazardous materials, and must be shipped via the fastest traceable means. All technical and quality requirements are governed by the DLA Master List.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-449S
This contract is for the procurement of 20 electrical covers, identified by NSN 5935-01-688-5512 and Glenair part number 660-050XM25N. The items are designated as critical application items and require FAA airworthiness approval and strict adherence to supply chain traceability documentation. Delivery is required within 55 days, with a required delivery date of June 13, 2026, and shipment to DLA Distribution San Joaquin in Tracy, California. The agreement mandates rigorous quality and packaging standards, including compliance with MIL-STD-129 for marking and MIL-DTL-55330 for connector preservation. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with zero-defect acceptance for sample lots. The contractor is responsible for maintaining configuration change management and adhering to DLA packaging requirements for procurement to ensure the integrity of the supplied components.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-T-449R
This contract is for the procurement of 10 electrical receptacle connectors, identified by NSN 5935014783932 and part number MS3402D24-2SW. The items are classified as critical application items and must adhere to Qualified Products List requirements for connector assemblies and electrical contacts. Technical specifications are governed by SAE AS34021 and SAE AS50151 standards. The delivery is required within 84 days of order, with a need date of December 2, 2026, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance is required for DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Additionally, the contract mandates strict prohibitions against the intentional addition of mercury or mercury-containing compounds in the hardware.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details