Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Heidelberg Write Head Purchase

Active

80NSSC26941431QFederal

Response Deadline09/03/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The NASA Shared Services Center is seeking a sole source procurement for the purchase of a Heidelberg Write Head under solicitation number 80NSSC26941431Q. This requirement is categorized under NAICS code 334413 and is managed by the National Aeronautics And Space Administration. The solicitation was posted on August 31, 2026, with a response deadline of September 3, 2026. While the contracting office is located at the Stennis Space Center in Mississippi, the place of performance is designated for Hampton, Virginia. Shanna Patterson serves as the primary point of contact for this acquisition.

General Info

NASA sole source procurement for Heidelberg Write Head, solicitation 80NSSC26941431Q, performance in Hampton, Virginia.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

(3)

SATPC0042379 Tab 04 SOW - Heidelberg 66+ Write Head Upgrade

PDF•sow

SATPC0042379 Capabilities Statement Notice

PDF•sources-sought

NASA Sole Source Recommendation - Heidelberg DWL 66+ Upgrade

PDF•justification-and-authorization

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PostedAug 31

special-notice

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 12:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts1 person available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

Shanna Patterson

contact@example.gov

Full Description

Show more

** THIS IS A SOLE SOURCE REQUIREMENT ** for Heidelberg Write Head Purchase

Similar Contracts

Same NAICS industry code

Semiconductor Device Supply & ManufacturingThe Department of Defense Active Devices Division is seeking a subcontractor for the supply of seven military-grade semiconductor devices, specifically part number MDD 95-12N1B under NSN 5961016075742. The contract requires strict adherence to defense and export control standards, with a mandatory requirement for full manufacturing traceability for all units provided. This procurement opportunity falls under NAICS code 334413 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 11, 2026, following the posting date of August 31, 2026.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Critical Application Microcircuit, Linear Components (SBF-50892)The Department of Defense, through the Active Devices Division, is seeking a subcontract for the supply of two units of a critical application linear microcircuit, part number SBF-50892. These components must be manufactured by Qorvo US, Inc. and strictly adhere to military standards for packaging, marking, and electrostatic discharge handling. The procurement falls under NAICS code 334413 and is to be performed in Columbus, Ohio. Interested parties must submit their responses by the deadline of September 11, 2026, following the posting date of August 31, 2026.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

CAPACITOR, FIXED, ELECTR

Solicitation # SPE7M2-26-T-6619

This contract is for the procurement of 356 fixed electrolytic capacitors, identified as commercial items under NSN 5910-01-119-4348 and part number M39006/22-0580. The items must adhere to MIL-PRF-39006/22L and MIL-PRF-39006H specifications and are subject to Qualified Products List or Qualified Manufacturers List requirements. The contract mandates strict compliance with environmental and safety standards, specifically prohibiting the intentional addition of mercury and the use of Class I ozone-depleting substances. Key logistical details include a delivery timeframe of 165 days with a required delivery date of April 25, 2027, shipping FOB Origin to DLA Distribution Warner Robins. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129. Additionally, the contractor must provide specific lead finish markings on individual unit packs in accordance with IPC/JEDEC J-STD-609.

NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

SEMICONDUCTOR DEVIC

Solicitation # SPE7M5-26-T-396N

Solicitation SPE7M5-26-T-396N is a request for quotations issued by the Department of Defense, Active Devices Division, for the procurement of one semiconductor device diode, identified by NSN 5961-01-269-3123. The requirement is for a single unit to be delivered to Robins AFB, Georgia, within five days after the date of award. The procurement is conducted under the DLA Master Solicitation Revision 105 and requires submissions via the DLA Internet Bid Board System. The contract mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and qualification through the Qualified Suppliers List of Distributors or Qualified Testing Suppliers List for semiconductors. Packaging and preservation must comply with MIL-DTL-19491 and MIL-STD-2073-1E, while marking and labeling must follow MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through Wide Area WorkFlow and compliance with various FAR and DFARS clauses, specifically those regarding cybersecurity safeguarding under NIST SP 800-171, the prohibition of certain telecommunications equipment, and the use of U.S.-flag vessels for ocean transportation. Offerors must provide a complete data package for approved or alternate parts and certify their socioeconomic status and UEI/CAGE code information.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

MICROCIRCUIT, LINEAR

Solicitation # SPE7M5-26-T-455A

This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-455A, is for the procurement of five linear microcircuits with the national stock number 5962-01-078-9868. The contract requires delivery within 207 days after the order is placed and is categorized under NAICS code 334413. The agreement is subject to strict technical and quality requirements as defined in the DLA Master List. Furthermore, the item contains technical data governed by ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-455U

This contract is for the procurement of 21 units of a specific transistor, identified by NSN 5961-01-331-1055 and BAE Systems part number 615467-906. The item is designated as a critical application item and must be sourced from qualified suppliers listed under FSC 5961 and 5962. Delivery is required within 157 days, with a need ship date of February 16, 2027, and a final required delivery date of March 16, 2027. The shipping destination is DLA Distribution Warner Robins in Georgia. The contractor must adhere to strict technical and quality requirements, including CMMC Level 2 self-assessment and the maintenance of supply chain traceability documentation. Packaging and marking must comply with MIL-STD-129, MIL-DTL-19491, and IPC/JEDEC J-STD-609 specifically for lead finish identification. The contract specifies a zero percent quantity variance and designates both inspection and acceptance points at the destination.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

MICROCIRCUIT, DIGITAL

Solicitation # SPE7M5-26-T-455C

This contract is for the procurement of 27 units of digital microcircuits, specifically Texas Instruments part number SNJ54LS04FK (NSN 5962-01-213-9255). The acquisition is designated as a critical application item and requires the use of qualified suppliers for Federal Supply Class 5962. Delivery is set for 159 days after order, with the final destination being DLA Distribution DDWO in Columbus, Ohio. Strict compliance is required regarding supply chain traceability and counterfeit avoidance. Contractors must submit DLA Land and Maritime Form 918 and all supporting traceability or test documentation for approval at least 15 days before the delivery date; shipment is prohibited until written authorization is received. Additionally, the contract mandates rigorous packaging standards, including MIL-PRF-81705 for ESD/EMI protection and IPC/JEDEC J-STD-609 for lead finish marking. The agreement also prohibits the intentional addition of mercury and requires CMMC Level 2 self-assessment for cybersecurity compliance.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

SEMICONDUCTOR DEVIC

Solicitation # SPE7M5-26-T-455M

This contract is for the procurement of 24 semiconductor diode devices under NSN 5961-01-095-1661. The agreement specifies that surplus items are not acceptable and requires strict adherence to supply chain traceability documentation and qualified supplier lists for Federal Supply Classes 5961 and 5962. Delivery is set for 157 days after order, with a required delivery date of April 23, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. Technical compliance is governed by MIL-STD-129 and MIL-DTL-19491, with specific marking requirements for component lead finish per IPC/JEDEC J-STD-609. Quality assurance involves a zero-based sampling plan according to MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

SWITCH, THERMOSTATIC

Solicitation # SPE7M8-26-T-6376

This contract is for the procurement of 78 thermostatic switches under solicitation SPE7M8-26-T-6376 for the Department of Defense. The items are identified by NSN 5930-01-155-7762 and are designated as critical application items. This is a source-controlled procurement, specifically citing Oshkosh Defense LLC as an approved source, and all furnished items must strictly adhere to the requirements of the cited source control drawings. The agreement mandates strict compliance with DLA packaging requirements and prohibits the use of Class I ozone-depleting substances unless written approval is granted. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331. Delivery is set for 129 days after the order, with a required delivery date of March 3, 2027, shipping FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.

ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

MICROCIRCUIT, MEMORY

Solicitation # SPE7M5-26-T-453Y

This contract is for the procurement of 22 units of memory microcircuits, specifically Tektronix part number 163-0227-00 under NSN 5962-01-443-4819. The acquisition falls under Federal Supply Class 5962 and requires strict adherence to supply chain traceability and counterfeit avoidance protocols. Contractors must submit DLA Land and Maritime Form 918 and supporting traceability or test documentation for approval by the contract administrator at least 15 days prior to the delivery date; shipment is prohibited until written authorization is received. The agreement mandates rigorous packaging and marking standards, including IPC/JEDEC J-STD-609 for lead finish identification and MIL-PRF-81705 for electrostatic discharge and electromagnetic interference protection. All items must be delivered FOB Origin to the DLA Distribution center in Columbus, Ohio, with a required delivery date of February 21, 2027. Additionally, the contract prohibits the intentional addition of mercury and requires compliance with CMMC Level 2 self-assessment and covered defense information regulations.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

DUMMY LOAD, ELECTRIC

Solicitation # SPE7M1-26-T-289N

This contract, identified as SPE7M1-26-T-289N, is a solicitation by the Department of Defense Maritime Supply Chain for the procurement of 25 electrical dummy loads, specifically part number M39030/5-07N. The item is designated as a critical application item and must be manufactured by a qualified QPL source, as commercial equivalents are not acceptable. The procurement is governed by technical and quality requirements including MIL-DTL-39030F and MIL-DTL-39030/5C, and it strictly prohibits the use of Class I ozone-depleting substances in the design or manufacturing process without written approval. Key logistical and compliance details include a delivery timeframe of 35 days after receipt of order, with a required delivery date of November 1, 2026. Shipping is FOB Origin and destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates adherence to DLA packaging requirements RP001 and MIL-STD-129 for marking and labeling. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contractor must comply with Cybersecurity Maturity Model Certification CMMC Level 2 self-assessment and other defense information requirements.

MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

MICROCIRCUIT, DIGITA

Solicitation # SPE7M5-26-T-453U

This contract is for the procurement of 21 units of digital microcircuits, specifically part number TPS77633QPWPREP from Texas Instruments Incorporated, under NSN 5962-01-673-7373. The acquisition is classified as a commercial off-the-shelf item within Federal Supply Class 5962. Delivery is required within 157 days, with a need ship date of February 16, 2027, and a final delivery date of April 17, 2027. Inspection and acceptance will take place at the destination, with shipping directed to DLA Distribution DDWO in Columbus, Ohio. The contractor must adhere to strict quality and traceability standards, including the submission of DLA Land and Maritime Form 918 and supporting traceability or test reports at least 15 days prior to the delivery date. Shipment is prohibited until written authorization is received from the contract administrator. Additionally, the contractor must comply with specific packaging and marking requirements, including IPC/JEDEC J-STD-609 for lead finish identification and MIL-PRF-81705 for electrostatic discharge and electromagnetic interference protection to prevent component damage.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

B11 COMPRESSOR REPAIR

Solicitation # 80NSSC26942249Q

NASA/NSSC is seeking a contractor for B11 compressor repair services to be performed at the Goddard Space Flight Center. The agency intends to award a sole source contract to Cummins-Wagner Company, Inc., as they have been identified as the sole provider capable of performing the required repairs. This procurement is being conducted under FAR Part 12 for commercial items and services, utilizing NAICS code 811310. Interested organizations may submit capability statements and qualifications to the primary point of contact, Cody Guidry, by 3:00 p.m. CST on September 2, 2026. These submissions will be used exclusively to determine if the procurement should be conducted on a competitive basis rather than as a sole source. Only written capability statements will be accepted, as formal quotes will not be evaluated at this stage.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

ONGOING ENGINEERING SUPPORT

Solicitation # 80NSSC26942157

The NASA Shared Services Center is seeking specialized engineering support services for the Goddard Space Flight Center Astrophysics Division, specifically to support the X-ray astrophysics laboratory and the ESA Athena flagship mission. The scope of work involves advanced multi-spectral detector systems engineering and management, including end-to-end packaging and integration for x-ray, microwave, and infrared detector systems. Key responsibilities include providing mechanical engineering expertise via CAD software, leading wire bonding operations across three research units, and managing resources and inventory for specialized cleanrooms and testing laboratories. NASA intends to award a sole source contract to Teltrum, Inc. under the authority of FAR 12.102(a) for commercial items or services, utilizing NAICS code 541330. The period of performance is one year, with all activities conducted on-site at the Goddard Space Flight Center. Deliverables include technical status reports, updated standard operating procedures for wire bonding, documentation of packaging methodologies, personnel development plans, and strategic capability roadmaps. The contractor is required to maintain strict cleanroom operational standards and implement rigorous quality assurance and post-integration verification procedures to meet mission-critical specifications.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

Technical Reporting and DocumentationThe Technical Reporting and Documentation subcontract, issued by the NASA Shared Services Center, focuses on the compilation and formatting of technical data. The primary objective is to produce monthly progress reports and a final REGLINK technical report for official submission to the National Aeronautics and Space Administration. This opportunity falls under NAICS code 541611 and was posted on August 30, 2026. Interested parties must submit their responses by the deadline of September 2, 2026, at 4:00 PM.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Data Correlation and Process-Structure-Property ModelingThis subcontract, issued by the National Aeronautics and Space Administration through the NASA Shared Services Center, focuses on data correlation and process-structure-property modeling. The primary objective is to utilize statistical and data science methods to correlate regolith simulant properties with additive friction stir deposition process outcomes and resulting material properties. This analysis aims to define optimal processing windows for the technology. The opportunity was posted on August 30, 2026, with a response deadline of September 2, 2026. It is categorized under NAICS code 541690, which pertains to professional and technical consulting services.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Microstructure Analysis (SEM, XRD, XCT)The National Aeronautics And Space Administration, through the NASA Shared Services Center, is seeking a subcontract for advanced microstructural characterization of AFSD deposits. The primary objective of this effort is to analyze grain structure, phase composition, and defect formation utilizing Scanning Electron Microscopy, X-ray Diffraction, and X-ray Computed Tomography. This opportunity falls under NAICS code 541380 and was posted on August 30, 2026. Interested parties must submit their responses by the deadline of September 2, 2026, at 4:00 PM.

Testing Laboratories and Services

POSTED

DEADLINE

Mechanical Testing of AFSD Test CouponsThe National Aeronautics And Space Administration, through the NASA Shared Services Center, is seeking a subcontractor to conduct mechanical testing on fabricated AFSD test coupons. The primary objective is to evaluate the mechanical performance of these coupons under simulated space conditions by performing a series of specialized tests, including tensile, hardness, fatigue, and shear testing. This subcontract opportunity falls under NAICS code 541380. The solicitation was posted on August 30, 2026, with a response deadline of September 2, 2026, at 4:00 PM.

Testing Laboratories and Services

POSTED

DEADLINE

AFSD Process Trials and Parameter OptimizationThe NASA Shared Services Center is seeking a subcontractor for the AFSD Process Trials and Parameter Optimization project. The primary objective of this contract is to conduct controlled Additive Friction Stir Deposition trials utilizing regolith-modified materials. These trials will involve testing a specific matrix of process parameters, including tool rotation, travel speed, and force, to optimize the deposition process. This opportunity was posted on August 30, 2026, with a response deadline of September 2, 2026. The contract falls under NAICS code 332999 and is managed by the National Aeronautics And Space Administration.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Regolith Simulant Feedstock Preparation and ClassificationThis subcontract through the NASA Shared Services Center focuses on the preparation and classification of lunar and martian regolith simulants. The primary objective is to sieve and classify these materials based on their chemical composition, morphology, and grain size to ensure full compatibility with AFSD processes. The opportunity was posted on August 30, 2026, with a response deadline of September 2, 2026. It is categorized under NAICS code 541380, reflecting a focus on specialized scientific research and technical services.

Testing Laboratories and Services

POSTED

DEADLINE

Workforce Development and Technical MentoringThe NASA Shared Services Center is seeking a subcontract for Workforce Development and Technical Mentoring to enhance expertise in detector technologies. The primary objective of this engagement is to implement structured mentoring programs and create annual personnel development plans designed to accelerate the acquisition of critical technical skills. This opportunity was posted on August 30, 2026, with a response deadline of September 3, 2026. The contract falls under NAICS code 611430, reflecting its focus on professional and management development training.

Professional and Management Development Training

POSTED

DEADLINE

Detector Evaluation and Standard Operating Procedures (SOP) DevelopmentThe Detector Evaluation and Standard Operating Procedures (SOP) Development subcontract is issued by the National Aeronautics And Space Administration through the NASA Shared Services Center. The primary objective of this agreement is to establish standardized operating procedures for cross-disciplinary detector evaluation and performance benchmarking, ensuring consistent technical assessments across various platforms. This opportunity was posted on August 30, 2026, with a response deadline of September 3, 2026. The contract is categorized under NAICS code 541690, reflecting its focus on professional and technical consulting services.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Cleanroom and Laboratory Resource ManagementThe Cleanroom and Laboratory Resource Management subcontract, issued by the NASA Shared Services Center, focuses on the oversight of inventory control, resource allocation, and the procurement of mission-critical consumables. These services are specifically designated for the maintenance and operation of specialized cleanrooms and testing laboratories. The opportunity was posted on August 30, 2026, with a response deadline of September 3, 2026. It falls under NAICS code 541611, indicating a requirement for professional administrative and management consulting services to ensure the operational readiness of NASA's technical facilities.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Cryogenic and Post-Integration Testing SupportThe NASA Shared Services Center is seeking a subcontractor for Cryogenic and Post-Integration Testing Support. The primary objective of this contract is to conduct cryogenic validation and post-integration verification of detector systems to ensure they meet all mission-critical specifications. This opportunity is categorized under NAICS code 541380. Interested parties must submit their responses by the deadline of September 3, 2026, following the posting date of August 30, 2026.

Testing Laboratories and Services

POSTED

DEADLINE