Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

High-Accuracy Portable CMM / Articulated Metrology Arm Supplier

Open

International

Response Deadline12/04/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Government of Canada → National Research Council of Canada

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

Canada, South Korea, CAN

Set-Aside

NONE

Documents

This scope was carved out of 26-58193.

The full solicitation package (8 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Purchase of a high-accuracy portable coordinate measuring machine (CMM) or an articulated metrology arm

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineDec 4

Submission deadline

Response Deadline

12/04/2026, 07:00:00 PM UTCin 24 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → National Research Council of Canada

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a 2.5m portable Coordinate Measuring Machine (CMM) or articulated metrology arm for prime contractors on National Research Council Canada radio telescope antenna panel alignment projects. Provides a 7-Axis system with accuracy ≤ 0.025 mm compatible with BuildIT software and FARO or Leica trackers. Includes 110V AC/battery power systems and hard-shell carrying cases. Delivers a fully operational CMM system DAP British Columbia.

Similar Contracts

Same NAICS industry code

Supply of Time Totalizing Meters (NSN 6645-01-141-7603)This subcontract involves the supply of six 28.0 volt DC electrical time totalizing meters, specifically part number 16G9CF28-136 from Talley Industries General Times Corp. Electrodynamics Div., to support DLA Weapons Support Aviation Supply Chain contracts. The items are to be delivered to Yokosuka, Japan, and must adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Compliance requirements include quality assurance according to MIL-STD-1916 or ASQ H1331, as well as a CMMC Level 2 self-assessment. The procurement falls under NAICS code 334519 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Reciprocating Counter Manufacturing and AssemblyThis subcontract involves the manufacture and assembly of 87 reciprocating counter units for the DLA Weapons Support Nuclear Reactor Program. The scope of work includes precision machining, electronic assembly, and the integration of the reciprocating counter mechanism according to L3Harris part number 744430-K01. Performance will take place in Tracy, California, and requires the use of high-precision machining tools and specialized electronic testing equipment. Strict adherence to quality and safety standards is mandatory, specifically requiring compliance with MIL-STD-1916 or ASQ H1331 sampling methods and a total prohibition of mercury compounds. The project is categorized under NAICS code 334519 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

COUNTER, RECIPROCATING

Solicitation # SPE7M2-27-T-0860

This solicitation, issued by the DLA Weapons Support Nuclear Reactor Program under solicitation number SPE7M2-27-T-0860, is for the procurement of 87 units of a reciprocating counter, identified as a critical application item with NSN 6680013908625 and L3Harris Maritime Power & Energy part number 744430-K01. This is a small business set-aside procurement under NAICS code 334519. The required delivery date is September 23, 2027, with a need ship date of April 26, 2027, and a delivery timeframe of 156 days after award. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and safety standards, including sampling methods per MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Mercury and mercury-containing compounds are strictly prohibited in preservation, packaging, and marking, and any portable instruments containing mercury must be shock-proof with secondary containment per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E, MIL-PRF-23199, and MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

INDICATOR, SIGHT, LIQUID

Solicitation # SPE4A6-27-T-7892

Solicitation SPE4A6-27-T-7892 is a Request for Quotations issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of two liquid sight indicators, NSN 6680-01-422-5697. The requirement is designated under NAICS code 334519 and is not a small business set-aside, though it may utilize the HUBZone price evaluation preference. Delivery is required by September 1, 2027, with a need ship date of April 20, 2027, shipped FOB Origin to the DLA Distribution Depot in Bremerton, Washington. The contract mandates strict quality and safety compliance, requiring the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards. Inspection and acceptance will occur at the origin, with sampling conducted per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, specifically identifying the items as delicate instruments. Notably, the use of mercury or mercury-containing compounds is prohibited in the hardware, preservation, and packaging. Offerors must submit quotes via the DLA Internet Bid Board System and comply with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

GAGE, PRESSURE, DIAL

Solicitation # SPE4A6-27-T-7868

Solicitation SPE4A6-27-T-7868 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of dial pressure gages, NSN 6685009514539. The requirement consists of two line items totaling 100 units, with 33 units destined for DLA Distribution Jacksonville and 67 units for DLA Distribution San Diego. This is a source-controlled critical application item that must be manufactured and tested according to basic drawing 76301 ST7M361, Revision C. Acquisition is restricted to approved sources, specifically Ametek Inc., and alternate offers will not be accepted. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-129 for marking and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and FED-STD-313. Inspection and acceptance will occur at the destination. Delivery is required within 78 days, with a need ship date of October 14, 2026. Offerors must submit quotes via the DIBBS system and comply with the Buy American Act and various cybersecurity regulations, including DFARS 252.204-7012.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

METER, TIME TOTALIZI

Solicitation # SPE4A1-27-T-0336

The DLA Weapons Support Aviation Supply Chain is soliciting a fixed-price contract for the procurement of six time totalizing meters. The required hardware is a 28.0 volt DC electrical meter, specifically Talley Industries General Times Corp. Electrodynamics Div. part number 16G9CF28-136 (NSN 6645-01-141-7603). This procurement is designated as a small business set-aside, with a required delivery date of March 27, 2026, and a delivery timeframe of 20 days after order. The items are to be delivered FOB Origin to the Yokosuka Repair and Supply Facility in Japan. The contract mandates strict adherence to quality and safety standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with a specific requirement to label the items as delicate instruments. Mercury and mercury compounds are prohibited in the preservation and packaging process. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 using a zero-based sampling plan. Additionally, the contractor must comply with CMMC Level 2 self-assessment requirements and utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Albany UltraFast Primary Logic Controller SupplyThis small business set-aside subcontract, managed by the Department of Defense for the 92 Cons Lgc, involves the supply of one primary electronic internal logic controller unit for U.S. Air Force facility projects at Fairchild AFB. The required unit must be equipped with an anodized aluminum housing featuring IP 55 protection, a vector-controlled frequency converter, a 3 phase supply voltage between 220 and 480 V, and a UL listed 24 V DC control voltage. To be eligible, the supplier must provide manufacturer certification ensuring the unit is fully compatible with the Albany UltraFast series. The solicitation was posted on November 10, 2026, with a response deadline of November 20, 2026, falling under NAICS code 334519.

FA4620 92 Cons Lgc

POSTED

about 13 hours ago

DEADLINE

SPE4A727R0106 - 6685 - THERMOSTAT, FLOW CONTROL / WSIC F

Solicitation # SPE4A727R0106

This DLA Aviation solicitation, number SPE4A727R0106, is for an indefinite quantity contract to procure flow control thermostats under NSN 6685-014449478. The contract features a five-year base period with no additional options and an estimated annual quantity of 2,900 units. Approved sources are limited to AM General LLC and General Motors LLC. Delivery is required within 164 days after receiving an order, with a minimum order quantity of 599 and a maximum of 2,900, plus a surge requirement of 100 units. The procurement is unrestricted and will be awarded based on an equal weighting of price, past performance, and delivery, while also considering SPRS data. Inspection and acceptance will occur at the destination, with shipping terms set as FOB origin. Interested parties must submit written quotes via the DIBBS system, with the solicitation expected to be issued around November 25, 2026, and a response deadline of December 28, 2026.

POSTED

about 13 hours ago

DEADLINE

in about 2 months

50 VASI Pressure Transducers

Solicitation # 80NSSC27948506Q

NASA Shared Services Center

POSTED

about 13 hours ago

DEADLINE

Replace Door Control Unit

Solicitation # FA462027QC002

The U.S. Air Force, 92d Contracting Squadron, is seeking responsible sources to provide all labor, tools, equipment, and materials to purchase, remove, replace, program, and test the primary internal logic controller unit for an Albany UltraFast high-speed commercial roll-up door located at Building 1009 on Fairchild AFB, WA. This requirement, categorized under NAICS 334519 with a size standard of 600 employees, is designated as a Total Small Business Set Aside. The contractor must deliver a fully operational door system, ensuring the replacement unit is compatible with the existing Albany UltraFast series and that all controls and safety devices are properly adjusted. Key operational requirements include coordinating electrical power disconnects and reconnections with the 92 CES point of contact and adhering to strict security and environmental protocols. All contractor personnel must be U.S. citizens and will require government escorts due to the secure nature of the work location. Additionally, the contractor must submit a non-hazardous solid waste disposal plan prior to the Notice to Proceed and coordinate the approval of any hazardous materials through the HMMP Team at least fourteen days before starting work. Interested firms must respond by November 20, 2026, providing their business details, socioeconomic classification, and feedback on their ability to complete the draft Statement of Work.

FA4620 92 Cons Lgc

POSTED

about 13 hours ago

DEADLINE

Request for Information (RFI): Vehicle Integrated Point Enhanced RADIAC (VIPER) - Tracked Ground Vehicles

Solicitation # VIPER_27-TRACK

The Vehicle Integrated Platform Enhanced RADIAC (VIPER) project is a request for preproposals to develop, integrate, test, and demonstrate a non-Geiger-Müller (non-GM) alternative sensor prototype for tracked tactical ground vehicles. Managed by the Joint Product Manager for CBRN Sensing under the Joint Project Manager for Integrated Early Warning, this effort seeks to replace legacy AN/VDR-2 and AN/UDR-13 monitors. The goal is to provide integrated gamma dose-rate, residual-dose, and prompt-dose detection that can communicate crew-exposure data to a common operational picture via dedicated data ports and networking capabilities. Key deliverables include the manufacture of up to five enhanced prototypes, an updated Technical Data Package, software and firmware code, a Preliminary Design Review incorporating safety and environmental assessments, a Physical Configuration Audit, and training for ten government personnel. This requirement is handled through the Broad Other Transaction Authority Announcement (BOTAA) CWMD BOTAA-24-01, meaning it utilizes Other Transaction Agreements rather than standard FAR contract clauses. Preproposals are due by December 10, 2026, and must not exceed eleven pages. Evaluation is based on technical feasibility, relevance to DoD mission effectiveness, TRL/MRL levels, innovation, and the reasonableness of the proposed schedule and rough-order-of-magnitude cost estimate. To access the Controlled Unclassified Information (CUI) Technical Specification Summary, offerors must provide specific certifications, including an active DD Form 2345, a NIST SP 800-171 assessment, and a CMMC Level 2 self-assessment. Only offerors invited to submit a full proposal will receive detailed instructions regarding the final statement of work and acceptance criteria.

POSTED

about 13 hours ago

DEADLINE

HPLC Core System

Solicitation # 1178021

Usda, Fsis, Oas Pcmb

POSTED

about 13 hours ago

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Indium Phosphide Wafers/Substrates

Solicitation # 26-58192

POSTED

about 20 hours ago

DEADLINE

Benchtop Multiple Reactor Systems

Solicitation # 26-58202

The National Research Council Canada is soliciting proposals under solicitation number 26-58202 for the procurement, delivery, installation, and training of two benchtop multiple reactor systems for the Clean Energy Innovation Research Center. These systems will support the Critical Battery Materials Initiative by providing real-time chemical monitoring of hydrometallurgical and crystallization processes. The first system must feature integrated sampling automation compatible with a self-driving acceleration platform, while the second requires at least 16 reactors with a minimum volume of 0.5 mL and materials compatible with a pH range of 0 to 12. Both systems must support overhead stirring speeds of 1250 RPM or higher, independent temperature controls from -10 to 150 degrees Celsius, and provide a documented SDK or API supporting Python for automation. The procurement is an open tender available to Canadian suppliers and those from applicable trading partners under reciprocal procurement policies. The contract will be awarded to the compliant offer with the lowest evaluated price, provided it meets all mandatory technical criteria and the Canadian Electrical Code Part 1. Deliveries are to be made on a DAP Mississauga Ontario Incoterms 2020 basis, with an expected delivery window of eight weeks from the contract award. Proposals must be submitted in separate technical, financial, and certification volumes by November 24, 2026, at 2:00 PM EST. All packaging must meet environmentally preferable specifications, and the successful contractor must adhere to the NRC Integrity Regime and specific safety protocols during on-site installation at the Mississauga location.

Analytical Laboratory Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

Tabletop X-Ray Film Digitizer

Solicitation # 26-58207

The National Research Council of Canada is soliciting offers for the supply and delivery of one new tabletop x-ray film digitizer. This equipment is intended to improve laboratory workflow, digital archiving, and advanced damage detection using machine learning, and must meet ISO 14096 DS class requirements for digital storage to ensure minimal reduction in spatial resolution and signal-to-noise ratio. The contract includes the delivery of the hardware, acquisition software capable of exporting images as TIFF 16-bit grayscale, a minimum one-year manufacturer's warranty, and comprehensive English technical documentation. The solicitation is open exclusively to Canadian suppliers, with a response deadline of November 11, 2026. Award selection is based on the lowest evaluated price among bidders who meet all mandatory technical criteria. All deliverables must be received by March 15, 2027, with the overall contract term extending to June 30, 2027. Requirements include the use of environmentally preferable packaging that is reusable, returnable, or recyclable, and the inclusion of standard safety markings for electrical laboratory equipment. Payment will be made via the Receiver General for Canada within 30 days of receiving an undisputed invoice.

Analytical Laboratory Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

26-58007 Mobile Ground Control Station (MGCS) and Cargo Trailer for Drone Field Operations

Solicitation # 26-58007

POSTED

about 20 hours ago

DEADLINE

Laboratory Scale Electrode Calendaring System

Solicitation # 26-58096-B

POSTED

about 20 hours ago

DEADLINE

Metrology System Operation and Maintenance Training

Professional and Management Development Training

POSTED

DEADLINE

Metrology Inspection Cart Fabrication

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Precision Equipment Transportation and InstallationThis subcontract involves the transportation and onsite installation of high-precision systems for prime contractors working on National Research Council Canada projects in Ottawa, Ontario. The scope of work requires the use of specialized rigging or vibration-controlled transport to move equipment, followed by onsite assembly and calibration to ensure a strict accuracy requirement of 10 micrometers. The selected provider must adhere to all NRC site access and safety standards to successfully deliver the installed systems. This opportunity is categorized under NAICS code 484220 and is associated with the Government of Canada. Interested parties must submit their responses by the deadline of December 4, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

System Control Software DevelopmentThis subcontract for System Control Software Development involves the creation and integration of custom or licensed software to support prime contractors on projects for the National Research Council Canada. The scope of work focuses on high-precision technical requirements, including the development of control logic for actuators accurate to 10 micrometers, the implementation of safety logic for interlocked processing areas, and the integration of software capable of supporting engraving speeds of 4000 mm/s. The final deliverable is the installation and configuration of control software that is fully compatible with the specified hardware actuators. The project is managed under the Government of Canada and is categorized under NAICS code 541511. Performance of the contract will take place across locations in Canada and South Korea. Interested parties should note the response deadline of December 4, 2026, for this specialized software development initiative.

Custom Computer Programming Services

POSTED

DEADLINE

Precision Bed Component SupplyThe Precision Bed Component Supply subcontract involves the manufacture and delivery of specialized cutting and holding beds for prime contractors working on National Research Council Canada projects. The scope of work requires the production of an aluminum grid cutting bed and a vacuum table bed, both of which must adhere to strict dimensions and tolerances for a 900mm x 600mm processing area. These components must be constructed using high-grade aluminum and feature vacuum-sealed surfaces to ensure operational precision. This procurement is managed under the Government of Canada for the National Research Council of Canada, with performance locations spanning Canada and South Korea. The contract falls under NAICS code 332322, with a response deadline set for December 4, 2026.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

High-Precision Material Processing System FabricationThis subcontract involves the design, assembly, and integration of a high-precision material processing system for prime contractors working on National Research Council Canada projects. The scope of work requires the fabrication of a system featuring a material processing bed of at least 900mm x 600mm, an enclosed and interlocked safety area, and printer actuators capable of achieving positional accuracy of 10 micrometers or better with engraving speeds reaching 4000 mm/s. The project, managed under the Government of Canada, requires the delivery of a fully integrated and operational system. Performance will take place across locations in Canada and South Korea. Interested parties must respond by the deadline of December 4, 2026, for this specialized fabrication effort categorized under NAICS code 333998.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Bell 206B Composite Main Rotor Blades

Solicitation # 26-58208

The National Research Council of Canada is seeking to procure a set of Van Horn Aviation 206B composite main rotor blades for the Bell 206B. These blades are required to facilitate the application and testing of experimental erosion coatings, with the project scope encompassing ground testing and the possibility of limited flight testing. This federal solicitation, numbered 26-58208, was posted on November 9, 2026, with a response deadline of December 7, 2026. The performance of the contract will take place in Canada, and interested parties may contact the contracting authority, Shawn Doyle, for further information.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Purchase of a high-accuracy portable coordinate measuring machine (CMM) or an articulated metrology arm

Solicitation # 26-58193

National Research Council of Canada

POSTED

DEADLINE

Hexapod 6-axis high-precision positioning

Solicitation # 26-58212

National Research Council of Canada

POSTED

DEADLINE

W355B-270105B Laser Geometric Measuring & Bore Alignment System

Solicitation # WS5811557851

Department of Public Works and Government Services

POSTED

CLOSED

Recon Pro Field Kit V3

Solicitation # W8703-270116A

Department of National Defence

POSTED

CLOSED

HME Detection and Identification Equipment Supplier

Department of National Defence

POSTED

about 1 month ago

CLOSED

Pulse Magnetizer (23584-270044)

Solicitation # WS5741846211

Department of Public Works and Government Services

POSTED

about 2 months ago

CLOSED

about 2 months ago

Fast Electronic Spectrum analyzer

Solicitation # 26-58101

National Research Council of Canada

POSTED

CLOSED

F1818-266000 - Industrial Borescope System

Solicitation # WS5749980661

Department of Public Works and Government Services

POSTED

CLOSED

RFP- Digital Firefighting Equipment W0103-18944414 Solicitation

Solicitation # W0103-18944414

Department of National Defence

POSTED

CLOSED

DEPLOYABLE WEATHER OBSERVATION SYSTEM

Solicitation # W6399-26-LX59/A

Department of National Defence

POSTED

CLOSED

Supply of Pressure Gauges

Department of National Defence

POSTED

CLOSED

Integrating Sphere - Question and Answer #4

Solicitation # 26-58044

National Research Council of Canada

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS