Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Commerce was posted on September 4, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

High-brightness Oxygen Plasma Ion

Closed
SB1341-12-RP-0112Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516
New
Federal
Low-Range Force Frame Kit
Solicitation # N6426726R1010
Solicitation N6426726R1010 is a request for proposals for a five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to procure Low-Range Force Frame Kits (FFK) for the Naval Surface Warfare Center, Corona Division. The government intends to purchase a minimum of two and a maximum of 45 kits to support Navy fleet Calibration Laboratories. These kits must provide a stable platform for mounting and aligning force gages and dynamometers, adhering to Calibration Standards Specification (CSS) 06-3228 and MIL-PRF-28800G Class 4 environmental standards. Key deliverables include the hardware, a transit case with specific gasket and fastening requirements, COTS operator and service manuals (CDRL T001), and a repairable parts list (CDRL A001). All equipment must feature permanent identification plates and two-dimensional Unique Identification (IUID) data matrices conforming to MIL-STD-130N. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis, evaluating proposals on total price and a technical rating of acceptable or unacceptable. Technical evaluation includes a review of the offeror's past performance using up to three references from the last three years. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) portal by October 21, 2026. Required submission documents include a completed Cross Reference Matrix in Microsoft Excel, pricing for all CLINs, and a Small Business Subcontracting Plan for offerors other than small business concerns. Delivery is required within 120 calendar days from the issuance of a delivery order, with shipments sent FOB Contractor Destination.
Naval Surface Warfare Center

POSTED

about 22 hours ago

DEADLINE

in 12 days
NAICS: 334516
New
Federal
Off-Axis Parabolic Mirrors
Solicitation # FA860127Q0003
The Air Force Life Cycle Management Center, on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify qualified sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are intended for use in the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a 30mm diameter fused-silica substrate with a parabolic focus at 45 degrees, a surface roughness of less than 1nm RMS, and a scratch/dig specification of 20-10. The required protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance, and transportation to Wright-Patterson Air Force Base, Ohio. Key deliverables include the mirrors and comprehensive test data, including certificates of conformance and surface-measurement data. Delivery is required within 98 calendar days after receipt of order, and the equipment must be warranted against defects for two years following receipt. Payment terms are set at 100 percent after delivery, net 30 days from the invoice date. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026.
FA8601 Aflcmc Pzio

POSTED

about 22 hours ago

DEADLINE

in 2 days
NAICS: 334516
New
Federal
Flight Model Solar Array Wings
Solicitation # 80NSSC27946791Q
NASA/NSSC is seeking capability statements for the procurement of flight-qualified solar array wings for the TERP RAPTOR 12U CubeSat mission to asteroid Apophis. The requirement includes the acquisition and delivery of one flight model consisting of two solar array wings, each featuring 20 solar cells, hinges, spacers, and a thermal knife deployment system. The scope of work encompasses a comprehensive test campaign involving vibrations, TVAC, and bake-out tests, as well as the delivery of interface documentation, software, and calibration data. The contractor must also provide technical support during solar panel acceptance, spacecraft integration, and initial functional verification at the NASA Goddard Space Flight Center in Greenbelt, Maryland. This procurement is being conducted under FAR Part 12 for commercial items, with a planned period of performance for unit testing and integration from July 1, 2027, through October 31, 2027. While NASA/NSSC intends to issue a sole source contract to DHV Technology under FAR 12.102(a), they are currently requesting capability statements to determine if the procurement should be conducted on a competitive basis. Interested parties must submit their qualifications in writing to the designated point of contact by October 28, 2026. Please note that quotes will not be evaluated at this stage, and all correspondence must reference the notice ID 80NSSC27946791Q.
National Aeronautics And Space Administration

POSTED

about 22 hours ago

DEADLINE

in 7 days
NAICS: 334516
New
Federal
ICP-OES for Oil Analysis
Solicitation # W911S227U0057
Solicitation W911S227U0057 is a Request for Quotation for the procurement of new equipment for the material analysis lab at Yuma Test Center, specifically an Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) and a compatible autosampler. The ICP-OES must feature a radial torch with radial view, oxygen burn capability, chiller-free operation, and the ability to integrate a Catech ASXpress system and export data via .csv for LIMS entry. The autosampler must include a mixing or stirring head, a sample induction head, and a capacity for up to 384 samples across four 96-position test tube racks, with dimensions not exceeding 20 by 24 by 24 inches. Both items must be designed to meet ASTM D-5185 and Caterpillar SOS program performance standards. This acquisition is a Total Small Business Set-Aside under NAICS code 334516, managed by the W6QM Micc-Ft Drum. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, based on an evaluation of price and technical factors. Only new equipment will be accepted; used or remanufactured products are prohibited. Offers of equal products must provide brand names, model numbers, and descriptive literature to prove compliance with salient characteristics. Delivery is required F.O.B. destination, with a preferred timeframe of 30 days. Quotes must be submitted through the PIEE Solicitation module by November 14, 2026.
W6QM Micc-Ft Drum

POSTED

about 22 hours ago

DEADLINE

in 24 days
NAICS: 334516
New
International
HIGH THROUGHPUT SIMULTANEOUS DYNAMIC VAPOR SORPTION (DVS) ANALYSIS SYSTEM
Solicitation # 26-58161
The National Research Council Canada is soliciting offers for the supply, delivery, and installation of a high throughput simultaneous dynamic vapor sorption (DVS) analysis system for its Clean Energy and Innovation facility in Mississauga, Ontario. This system will be used to characterize and quantify the adsorption and desorption behavior of advanced materials, including battery materials such as anodes and cathodes, CO2 capture sorbents, and catalysts for hydrogen production and carbon conversion. The contract includes three primary lump sum deliverables: the DVS system with associated software and accessories, installation, and onsite training. The equipment must be delivered within 10 weeks of contract issuance, with installation completed within 120 days of the award. Specifically, installation must begin within 14 days of delivery and be completed within seven calendar days of the start date, followed by onsite training within 14 days of installation. All electrical equipment must be certified according to the Canadian Electrical Code, Part 1. The award will be based on the lowest evaluated price among offers that meet all mandatory technical criteria. Payment is structured upon the completion and acceptance of deliverables, with the provision that accepted equipment may be invoiced prior to the completion of installation and training. The delivery term is Delivered at Place (DAP) Mississauga, ON, Incoterms 2020. Offerors must submit separate electronic technical and financial proposals by October 28, 2026, ensuring compliance with environmentally preferable packaging specifications and the Canada Procurement Code of Conduct.
National Research Council of Canada

POSTED

1 day ago

DEADLINE

in 7 days
NAICS: 334516
New
SLED
Laboratory Equipment, Microscope & Accessories (Supply and Install) (Echo Revolve)
Solicitation # 40-27
Solicitation 40-27, issued by the New Hampshire Department of Administrative Services, seeks bids for the supply, delivery, and turn-key installation of an Echo Revolve R4 Upright Microscope and associated accessories for the NH Department of Fish and Game in Concord, New Hampshire. The required equipment is a hybrid fluorescence microscope capable of flipping between upright and inverted modes, featuring a 12.9-inch iPad Pro Retina display. Key deliverables include the microscope system, specific LED light cubes, various objective lenses, an ELWD universal condenser, stage inserts, and a digital haze reduction software module. The successful vendor must complete delivery and installation within 45 business days of the contract award. The contract will be awarded to the responsible vendor who submits a conforming bid meeting all technical specifications at the lowest total cost. Bids are due by October 23, 2026, and must be submitted via email to the Bureau of Purchase and Property. Vendors are required to provide proof of comprehensive general liability insurance of at least 1 million dollars per occurrence and 2 million dollars aggregate, as well as workers compensation insurance. Environmental guidelines encourage the elimination of PVC and polystyrene and the use of SmartWay transport partners. Payment terms are set at 30 days following the receipt of an itemized invoice after the equipment has been delivered, inspected, and accepted by the agency.
Das Purchasing (statewide Bids & Contracts)

POSTED

1 day ago

DEADLINE

in 2 days

General Info

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

100 Buerau Drive BLDG 301 ROOM B129, GAITHERSBURG, MD, 20899, USA

Set-Aside

SBA

Documents

1

Combined+SB1341-12-RP-0112+%283%29.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Commerce Nist
Contacts2 people available
OfficeGAITHERSBURG, MD, 20899, USA
Organization / AgencyDepartment Of Commerce Nist
Office AddressGAITHERSBURG, MD, 20899, USA
Contacts
Lisa LovelaceSr. Contract Specialist
Monifa ColemanContract Specialist

Full Description

Show more
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR 12.6 as supplemented with additional information included in this notice. Simplified acquisition procedures will be used, also. The resultant award will include all applicable provisions and clauses in effect through the Federal Acquisition Circular 05-60. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This synopsis, NAICS code 334516, is to notify Contractors that the Government intends to issue an award for the following specifications. This is a 100% Small Business Set-aside procurement. Prospective Offerors are responsible for downloading the solicitation and any amendments. It is the Offeror's responsibility to monitor the Federal Business Opportunity (FBO) website for the release of any amendments to this solicitation. The Government reserves the right to award a contract without discussions if the Contracting Officer determines that the initial offer(s) is/are providing the Best Value and discussions are not necessary. This solicitation is issued as a Request for Proposal (RFP). BACKGROUND: The Surface and Microanalysis Science Division (SMSD) of the Material Measurement Laboratory (MML), National Institute of Standards and Technology (NIST), has a need to improve the analytical performance of an existing Cameca IMS-1270/1280 mass spectrometer for improved fine particle isotope analyses. Due to the maturity of the instrument system and its related component development, SMSD is specifically focused on improving fine particle isotope analyses via acquisition of a high-brightness oxygen plasma ion source. Higher brightness ion sources provide more primary ions into a smaller beam size, enabling either a higher sensitivity to targeted analysts for a given beam size (and hence improved isotope detection on presently analyzed particles) or extending the present sensitivity to target analysts for a smaller beam size (and hence improved isotope detection for smaller, "fine" particles). Such improvements are critical to the measurement standards aims of the SMSD in the area of precision isotope analyses of individual particles. The National Institute of Standards and Technology (NIST's) has a requirement to procure one high-brightness oxygen plasma ion source system that improves upon the existing Cameca IMS-1270/1280 Oxygen Ion Source Current. DESCRIPTION OF SPECIFICATIONS: The Contractor shall be able to provide One (1) each of the following within 6 months: CLIN 0001 consists of: A high-brightness oxygen plasma ion source for an existing Cameca IMS 1270/1280 mass spectrometer. The specifications are as follows: a. High-brightness oxygen plasma ion source for mounting in place of or addition to the presently existing Cameca IMS 1270/1280 oxygen duoplasmatron ion source, at source potentials of +/- 150 eV through +/- 20 keV b. All electronics and relays for control of the high-brightness oxygen plasma ion source at 40 MHz, including any additional hardware required for both positive and negative ion source operation modes; preference given to integration with present Cameca software and electronics c. All appropriate adapters and lenses to migrate the contractor high brightness oxygen plasma source to a Cameca IMS 1270/1280, with preference to the inclusion of adapters and lenses that will also provide migration of the procured source to a Cameca IMS 4f mass spectrometer; drawings and dimensions for the present instruments can be provided to the contractor upon request d. Demonstration of existing oxygen ion source brightness value improvements for O2+, O2-, and O- by at least a factor of five (5) compared to the following existing oxygen ion source reference values for a given beam size: 100 mA/cm2 for less than or equal to 50 - m diameter O2+ (at 17.5 keV source potential and 10 keV sample potential) , 1.25 mA/cm2 for less than or equal to 50 - m diameter O2- (at -13 keV source potential and 10 keV sample potential), and 5 mA/cm2 for less than or equal to 50 - m diameter O- (at -13 keV source potential and 10 keV sample potential) e. Demonstration of ion source current fluctuations of less than or equal to 1 % over a 30 minute period for O2+, O2-, and O- f. All hardware required for multiple gas mixing, including, but not limited to all leak valves, gas manifolds, electronics, and relays, with preference given for the ability to conduct dual-mode switching of different constituent plasma ion beams within the same experimental sequence g. All additional source hardware required for continual source operation in case of source failure from material buildup, arcing, or other type of source breakdown h. All software needed to control the high-brightness oxygen plasma ion source system components, with preference given to integration with the Cameca software systems i. High-brightness oxygen plasma ion source lifetime (defined as time between cleaning of ion source chamber and/or need for service) of at least one (1) year j. One (1) year warranty including, but not limited to, all hardware, electronics, adapters, and other system components ***Billing shall be in a single invoice, upon completion, delivery of the equipment and acceptance upon performance demonstration metrics being met at NIST. PRICING SCHEDULE: CLIN: 0001 Cameca IMS - 1270/1280 1 EACH __________________ Improve upon existing Cameca beam brightness: High - brightness oxygen plasma Ion source system for existing Cameca IMS - 1270/1280 Oxygen Ion source. PERIOD OF PERFORMANCE: 180 DARO or sooner FOB: Destination National Institute of Standards and Technology (NIST) 100 Bureau Drive Gaithersburg, MD 20899 INSPECTION AND ACCEPTANCE TESTING: Destination Visual-Physical check at NIST for adherence to design specifications. Acceptance of the high-brightness oxygen plasma ion source system will occur after all work requirements/specifications are met, including all testing of performance metrics at NIST/SMSD. The SMSD Cameca IMS 1270/1280 mass spectrometer will be the system where all performance metrics will be tested, and relative improvements of the newly procured system will be compared with the values obtained with the present oxygen ion source and present instrument configuration. Government-Furnished Property, Material, Equipment, or Information (GFP, GFM, GFE, or GFI): No equipment or materials shall be provided to the Contractor by the Government for building of the high-brightness oxygen plasma ion source system. However, use of the Cameca IMS 1270/1280 mass spectrometer will be granted, with appropriate NIST personnel in attendance, in order for testing of the high-brightness oxygen plasma ion source system. General Information: Security: NIST is a restricted campus. An identification badge is required for access for entry into buildings and also is shown to the armed Security Police when entering the campus. For security purposes, each Contractor employee that visits NIST must provide their name, country of citizenship and other necessary information to NIST Polymers division at least one week in advance. Upon arrival, Contractors must provide government issued photo identification at security to receive a visitor's badge. Identification Badges: Contractor employees shall comply with NIST identification and access requirements. Each Contractor employee shall wear a visible identification badge provided by the NIST Security Office. Vehicle Registration: All Contractor employees must register their vehicles with the NIST Security Office to gain access to the campus. A valid driver's license, Government-furnished civilian ID, proof of insurance and current registration must be presented to the NIST Security Office, at which time a NIST vehicle pass will be issued. EVALUATION AND AWARD: Award. The Government intends to evaluate proposals and, if necessary conduct discussions with all responsible Offerors within the competitive range. The award will be made to the Offeror whose proposal conforms to the terms and conditions of the solicitation that, in the Government's estimation, provides the greatest overall benefit in response to the requirement. Lowest Priced, Technically Acceptable (LPTA). PROVISIONS and CLAUSES: 52.212-3 Offeror Representations and Certifications-Commercial Items. (APR 2012) 52.212-4 Contract Terms and Conditions-Commercial Items. (FEB 2012) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. (JUL 2012) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: __ (1) 52.203-6, Restrictions on SubContractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). _X_ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). __ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) __ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Feb 2012) (Pub. L. 109-282) (31 U.S.C. 6101 note). __ (5) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (Jul 2010) (Pub. L. 111-5). _X_ (6) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Dec 2010) (31 U.S.C. 6101 note). _X_ (7) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Feb 2012) (41 U.S.C. 2313). X (8) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (May 2012) (section 738 of Division C of Pub. L. 112-74, section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161). __ (9) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a). __ (10) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JAN 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). __ (11) [Reserved] _X_ (12)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644). __ (ii) Alternate I (Nov 2011). __ (iii) Alternate II (Nov 2011). __ (13)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). __ (ii) Alternate I (Oct 1995) of 52.219-7. __ (iii) Alternate II (Mar 2004) of 52.219-7. _X_ (14) 52.219-8, Utilization of Small Business Concerns (Jan 2011) (15 U.S.C. 637(d)(2) and (3)). __ (15)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2011) (15 U.S.C. 637(d)(4)). __ (ii) Alternate I (Oct 2001) of 52.219-9. __ (iii) Alternate II (Oct 2001) of 52.219-9. __ (iv) Alternate III (Jul 2010) of 52.219-9. __ (16) 52.219-13, Notice of Set-Aside of Orders (Nov 2011)(15 U.S.C. 644(r)). __ (17) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)). __ (18) 52.219-16, Liquidated Damages-Sub-contracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). __ (19)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). __ (ii) Alternate I (June 2003) of 52.219-23. __ (20) 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting (Dec 2010) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (21) 52.219-26, Small Disadvantaged Business Participation Program- Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (22) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657 f). _X_ (23) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2012) (15 U.S.C. 632(a)(2)). __ (24) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (Apr 2012) (15 U.S.C. 637(m)). __ (25) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (Apr 2012) (15 U.S.C. 637(m)). _X_ (26) 52.222-3, Convict Labor (June 2003) (E.O. 11755). _X_ (27) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Mar 2012) (E.O. 13126). _X_ (28) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). _X_ (29) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). _X_ (30) 52.222-35, Equal Opportunity for Veterans (Sep 2010)(38 U.S.C. 4212). _X_ (31) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). _X_ (32) 52.222-37, Employment Reports on Veterans (SEP 2010) (38 U.S.C. 4212). _X_ (33) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). __ (34) 52.222-54, Employment Eligibility Verification (JUL 2012). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) __ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) _X_ (36) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b). __ (37)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (DEC 2007) (E.O. 13423). __ (ii) Alternate I (DEC 2007) of 52.223-16. _X_ (38) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) (E.O. 13513). _X_ (39) 52.225-1, Buy American Act-Supplies (Feb 2009) (41 U.S.C. 10a-10d). __ (40)(i) 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act (May 2012) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, and 112-42). __ (ii) Alternate I (Mar 2012) of 52.225-3. __ (iii) Alternate II (Mar 2012) of 52.225-3. __ (iv) Alternate III (Mar 2012) of 52.225-3. __ (41) 52.225-5, Trade Agreements (MAY 2012) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). __ (42) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). __ (43) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). __ (44) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). __ (45) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). __ (46) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). _X_ (47) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003) (31 U.S.C. 3332). __ (48) 52.232-34, Payment by Electronic Funds Transfer-Other than Central Contractor Registration (May 1999) (31 U.S.C. 3332). __ (49) 52.232-36, Payment by Third Party (Feb 2010) (31 U.S.C. 3332). __ (50) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). __ (51)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). __ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: __ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). __ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 351, et seq.). __ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). __ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). __ (8) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (ii) 52.219-8, Utilization of Small Business Concerns (Dec 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subContractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) [Reserved] (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (JUL 2012). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. CCR: Vendors must be registered in the Central Contractor Register (CCR) prior to the award of a contract. You may register by going to: https://www.sam.gov. You will need your Dun & Bradstreet number and banking information. QUESTIONS DEADLINE: All questions are to be submitted via email to Lisa.Lovelace@nist.gov no later than September 07, 2012, 10:00am EST. PROPOSALS DUE: All proposals are due, electronically via FBO, no later than 11:00am, EST on: September 13, 2012. NO EMAILED QUOTES WILL BE CONSIDERED. Questions to this notice shall be sent via email to: Lisa.Lovelace@nist.gov . No phone calls will be accepted.

More opportunities from Department Of Commerce Nist

Same awarding agency

NAICS: 236210
New
Federal
Building 215 Clean Room HEPA Filter Replacement
Solicitation # RFI-195000-26-00181
The National Institute of Standards and Technology is conducting market research through a Request for Information for the Building 215 Advanced Measurement Laboratory cleanroom repair and HEPA filter replacement project in Gaithersburg, Maryland. This initiative follows a previous solicitation that failed to produce an acceptable offer, prompting NIST to reassess its acquisition strategy and seek industry feedback on constructability, cost, and schedule feasibility. The project scope involves the modernization of an 1,800 square meter facility, including the replacement of approximately 1,200 HEPA filters, 70 VAV terminal units, and 54 airflow monitoring devices, as well as the installation of 32 exhaust air control valves and associated ductwork repairs, testing, and recertification. A critical component of the project is the proposed phasing plan, which aims to minimize research disruptions by utilizing 19 construction phases, including 18 critical cleanroom outage phases. Each critical outage is currently envisioned as a nine-day window starting Friday evening and requiring 24/7 operations to achieve ready-for-re-occupancy by the following Monday morning. NIST is specifically requesting rough-order-of-magnitude cost estimates and industry input on whether this aggressive outage schedule is realistic or if it creates prohibitive risks and costs. Responses, including company experience and recommendations for improving competition and project execution, are due by October 14, 2026.
Industrial Building Construction

POSTED

2 days ago

DEADLINE

in 12 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS