Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

High-Power Generation Equipment Configuration and Software Modification

Active

Federal

Response Deadline07/30/2026, 04:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires on-site configuration of high-power generation equipment with specific technical demands, including proprietary modifications to both PLC software and hardware to achieve stable low-current output, minimal electrical ripple, and rapid response times. This work must be performed at the designated location in Bethesda, Maryland, with a response deadline set for July 30, 2026, and the opportunity posted on July 24, 2026. The effort is classified as a subcontract under NAICS code 335999, falling under the jurisdiction of the Department of Defense through the NSWC Carderock organization. All performance and technical deliverables are expected to meet stringent operational standards, with the success of the project dependent on precise real-time adjustments to the control systems. There is no set-aside designation or specific point of contact listed, and the solicitation number is not provided.

General Info

On-site configuration of high-power equipment in Bethesda with proprietary PLC mods, due July 30, 2026, under DoD subcontract.

Agency

Department Of Defense → Nswc CarderockView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

Bethesda, MD, 20817, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 04:00:00 AM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Carderock

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Nswc Carderock

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site configuration of high-power generation equipment including modification of proprietary PLC software and hardware to ensure stable low-current output with minimal ripple and rapid response times.

Similar Contracts

Same NAICS industry code

CONDUIT, METAL, FLEXIThe contract specifies the procurement of 494 feet of metal flexible conduit meeting MIL-PRF-24758A specifications, delivered in continuous length on a spool or reel with no random cuts permitted. Delivery is FOB Origin, with a required delivery date of April 4, 2027, and a need ship date of March 18, 2026, allowing for a 123-day lead time. Quantity may vary by plus or minus 10 percent, and acceptance and inspection occur at the origin under DLA’s RQ009 requirement, using sampling methods per MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Critical, major, and minor attributes are assigned AQL levels of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E, with a QUP of 100, preservation method 10 (cleaning/drying), no preservation or wrap material, cushioning made of air-filled plastic, and unit container marked ZZ to denote continuous length on a spool. Marking must adhere to MIL-STD-129, with no special markings required, and palletization follows DLA’s RP001 packaging requirements. The item is identified by NSN 5975-01-525-3170 and is subject to strict mercury restrictions—no intentional addition or direct contact with mercury or mercury compounds is permitted except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shock-proof construction and secondary containment. The solicitation is a total small business set-aside under NAICS 335999, requiring full compliance with FAR 52.219-28 and associated small business representations. Contract administration requires use of WAWF for invoicing, and cybersecurity requirements are enforced per DFARS 252.204-7012 and NIST SP 800-171 assessment mandates, with additional provisions covering trafficking in persons, employment eligibility verification, sustainable products, hazardous materials identification, hexavalent chromium prohibition, and export control. Subcontracting for commercial products follows deviation 2026-O00

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

INSULATOR, PLATEThe contract is for a single unit of an insulator, plate, identified by NSN 5970-01-203-5932, with delivery required 20 days after award to a U.S. Army Aviation Depot address in Tainan City, Taiwan. The item is classified as a commercial item and must comply with technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, bare item marking per RQ017, and removal of government identification from non-accepted supplies per RQ011. Packaging must follow MIL-STD-2073-1E at Level B with code Q, using CLNG/DRY preservation method, and bear the Special Marking Code 32 to indicate a non-extendable 60-month shelf life. Marking and labeling must adhere to MIL-STD-129, including barcoding for shipping containers, with hazardous material labeling conforming to 29 CFR 1910.1200 and MIL-STD-129 for radioactive items. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in the sample lot unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. All shipments must be transported on U.S.-flag vessels unless waived, and the contract employs WAWF for electronic invoicing. The contractor must meet employment and ethical compliance clauses including equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, and hazardous material identification, with additional DFARS requirements for NIST SP 800-171 cybersecurity assessment, subcontractor controls for commercial products, and notification of safety issues. Offerors must provide a Unique Entity ID and CAGE code, declare small business status and any applicable socioeconomic categories, and disclose if they supply covered defense telecommunications equipment. Proposal submissions are mandatory through the DIBBS portal by July 29, 2026, with point of contact for technical inquiries listed as Shenika Thompson.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BATTERY POWER SUPPLYThe contract is for the procurement of 19 units of a battery power supply identified by NSN 6130-01-525-0952, issued under solicitation SPE7L7-26-T-4297 as a total small business set-aside. The item requires delivery to Robins Air Force Base, Georgia, with a delivery window of 431 days after order and a mandatory ship date of September 29, 2027. The packaging and handling of the item must fully comply with MIL-STD-2073-1E for packaging and preservation and MIL-STD-129 for marking, labeling, and barcoding, and must include dry storage conditions with a strict 24-month non-extendable shelf life. The shipment is subject to FOB origin terms and must be invoiced exclusively through the Wide Area WorkFlow system using an invoice and receiving report combo format. The item is subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and distribution is restricted to DLA contractors with approved JCP certification, completed training, and formal authorization to access controlled technical data. The contractor must ensure all hazardous materials are labeled per 29 CFR 1910.1200 and must notify the Contracting Officer in writing prior to shipment if any component contains radioactive materials exceeding specified thresholds. All offers must be submitted electronically via DIBBS by the July 29, 2026 deadline and must include a valid Unique Entity ID and CAGE code. The contractor must affirm small business status and complete all required representations, including compliance with clauses on employment eligibility, equal opportunity, combating trafficking, and whistleblower rights. The contract incorporates DFARS clauses requiring NIST SP 800-171 compliance for cybersecurity, and mandates that the manufacturer be certified as a CMMC Level 2 accredited third-party assessment organization. No pricing details are confirmed beyond the quantity and extended value of $19.000, and the basis of award remains unspecified. The contractor is responsible for ensuring conformity to all inspection criteria at the destination point, with acceptance governed by zero non-conformance requirements for critical attributes and sampling standards aligned with MIL-STD-1916 and ASQ standards.

POSTED

DEADLINE

Power Supply and Fan Tray Supply (Core Component)Nine power supplies with integrated fan trays are being procured under a small business set-aside contract, specifically designated for total small business participation, to meet stringent technical and environmental standards suitable for military or industrial applications. The requirement is for fully integrated units that ensure reliable operation under demanding conditions, with all components designed to function effectively within the specified operational environment. The contract falls under NAICS code 335999 and is managed by the Department of Commerce, NOAA, with performance expected to occur in Grandview, Missouri, under a tight timeline requiring responses by August 4, 2026, following a posting date of July 24, 2026. The procurement is structured as a subcontract opportunity, emphasizing compliance with federal acquisition regulations and the necessity of meeting exacting performance benchmarks for mission-critical applications.

Department Of Commerce Noaa

POSTED

DEADLINE

Electrical Equipment & TestingThe Naval Air Warfare Center, Weapons Division, China Lake, intends to award a sole source firm fixed price contract to Acumentrics for the delivery and testing of one lot of electrical equipment designated as ANB1501RSPNLIA. This action is justified under FAR 6.103.1 because Acumentrics is the original equipment manufacturer and the only source capable of performing the necessary performance testing required to ensure compatibility with existing on-site systems. No request for quotes will be issued, and this notice serves only as an announcement of intent to proceed without competition. Interested parties may submit a capability statement by 07/29/2026 at 0900 to demonstrate their ability to meet the technical requirements for quality, accuracy, reliability, and schedule, referencing solicitation number N6893626SIMACQD550000E5500000371. All submissions must be sent to Yvonne Stockwell at yvonne.c.stockwell.civ@us.navy.mil. Vendors must maintain an active registration in SAM.gov prior to any potential award, as the government cannot obligate funds to entities without an active status, and processing SAM verification can take up to 15 days. Additionally, contractors must be certified through the Defense Logistics Information Services Joint Certification Program to access Controlled Unclassified Information or Export Controlled Information. Access to such information is restricted to a single designated Data Custodian per CAGE code, who must have an approved DD 2345 form. Contractors are responsible for coordinating with their CAGE code’s Data Custodian to obtain proper authorization before requesting access to CUI. Failure to comply with these requirements will result in disqualification from consideration.

Naval Air Warfare Center

POSTED

DEADLINE

RFQ - Buckley SFB Rectifier Inverter System ReplacementThe government is seeking a contractor to fully replace the rectifier/inverter system in Building 730, Room 132 at Buckley Space Force Base, Colorado. This system is critical for converting alternating current to direct current to support reliable power delivery for the Department of the Air Force’s long-haul communications infrastructure, drawing from commercial power, backup generators, and battery-based uninterruptible power supplies. The replacement must ensure continuous, stable operation of essential communications systems. A mandatory site visit is scheduled for July 31, 2026, at 1000 Mountain Time, and all prospective offerors must register their attendees by 1400 Mountain Time on July 29, 2026. Contractors must arrange base sponsorship through the visitor center prior to the visit and arrive early enough to complete the process before the scheduled start time. This request for quotation is a total small business set-aside under NAICS code 335999 and is issued under solicitation number FA254326Q0011 by the Department of Defense through the 460 Cons office. Offers must be submitted no later than 1100 Mountain Time on August 6, 2026, to the designated Contracting Officer and Contract Specialist. Late submissions will not be accepted. The primary point of contact is Maurice Epps, with secondary support from Matt Kennedy, TSgt. The place of performance is located in Aurora, Colorado, with a zip code of 80010, and all correspondence and submissions must be directed to the provided email addresses. The solicitation was posted on July 24, 2026, and is accessible via the SAM.gov portal.

FA2543 460 Cons

POSTED

DEADLINE

Airborne Direction Finding SystemsThe U.S. Navy’s Naval Information Warfare Center Atlantic is conducting market research through a Request for Information (RFI) to identify industry capabilities for an airborne Direction Finding (DF) system designed for use by United States Special Operations Command. The system must rapidly and accurately geolocate threat emitters in contested radio frequency environments, operating across the HF to SHF frequency spectrum with a Modular Open Systems Approach (MOSA) architecture. Respondents are required to provide detailed technical data including antenna type, gain, VSWR, and DF accuracy graphs; complete Size, Weight, Power, and Cooling (SWaP-C) specifications for all components; Technology and Manufacturing Readiness Levels with supporting evidence; interface capabilities with software defined radios via Ethernet and RF ports for IF data; and a supply chain risk management plan identifying whether the solution is Commercial Off-the-Shelf, Government Off-the-Shelf, or modified. The system must be ruggedized and tested to comply with MIL-STD requirements and is expected to be significantly lighter and more power-efficient than existing systems. All submissions are unclassified, treated as public information, and become Government property without compensation. Respondents are requested to provide a non-binding Rough Order of Magnitude cost for 10, 50, and 100 units covering the antenna, processor, software, training, and a one-year warranty. Production capability and estimated lead times for initial and full-rate production must be described, including scalability to meet delivery requirements. The RFI is not a solicitation, proposal, or contract opportunity, and the Government will not award a contract based on responses; however, it intends to leverage Other Transaction Authority or Commercial Solutions Opening for future prototype efforts. Responses are due by noon EDT on July 17, 2026, and must be submitted via email to the designated point of contact. The NAICS code is 335999 with no set-aside applied.

POSTED

DEADLINE

in about 1 month

INSULATION PIPEThe Fleet Logistics Center Puget Sound is seeking insulation pipe with specific part numbers 6RHFN068658, 6RHFN068858, 6RFHN068558, and 6RHFN068418 under a sole source arrangement with K-Flex LLC, though the government is open to evaluating interest from other vendors to determine if competition is feasible. The procurement is structured as a Total Small Business Set-Aside, and offers will be assessed for technical capability including delivery timing, price reasonableness, and past performance without prioritizing any single factor. The evaluation will follow RFO 12.203 guidelines to select the most advantageous offer. The anticipated award is scheduled for August 2026, with quotes due by August 7, 2026. The solicitation is issued under NAICS code 335999 and is managed by the Department of Defense through Naval Supply Systems Command. The primary point of contact for the procurement is Taura Helms, reachable at taura.s.helms3@navy.mil, with secondary support from Denise Manor. Performance will occur in Yokosuka, and all responses must be submitted via the SAM.gov portal referenced in the solicitation details.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Dynapower system configurationThe Naval Surface Warfare Center Carderock Division is soliciting a sole-source contract with Dynapower LLC for the system configuration of high-power generation equipment under FAR Part 13.106-1(b), citing unique circumstances that justify non-competitive procurement. The NAICS code is 335999 with a small business size standard of $600 million in annual receipts, and no set-aside is being used. The solicitation, identified by number N0016726Q1128, incorporates all applicable provisions and clauses effective through Federal Acquisition Circular FAC 2026-01 and DFARS DPN 20260702, with full terms detailed in the attached solicitation document. Interested parties may express interest by submitting a capabilities statement by 12AM EST on July 30, 2026, which must include pricing, FOB point, point of contact details, GSA contract number (if applicable), business size, payment terms, and clear demonstration of ability to meet all technical requirements. Responses must be sent via email to Steven Besanko at steven.w.besanko.civ@us.navy.mil, and while this notice is not a formal request for quotes, all submissions received by the deadline will be reviewed to determine whether a competitive procurement is warranted. The contract will be performed at the organization’s location in Bethesda, Maryland.

POSTED

DEADLINE

New Eaton UPS Battery & RentalThe solicitation for the New Eaton UPS Battery & Rental, identified as BD3-007 and issued by the Commanding Officer of the Naval Surface Warfare Center, Port Hueneme Division, is a total small business set-aside under FAR 19.5 with a NAICS code of 335999. The requirement is for the procurement and installation of a permanent Eaton 93PM 40kW UPS system with an integrated Narada 9-Module Lithium Battery cabinet and a Power Xpert Gateway Card for remote monitoring, alongside an eight-month rental of a Powerware 9390 40kVA UPS and matching battery cabinet. The contract includes full turnkey services: removal and EPA-compliant disposal of the existing faulty UPS, manufacturer-certified installation and commissioning of both the rental and permanent systems, crane-assisted rigging, and a five-year OEM support package consisting of a standard one-year warranty plus a four-year extended warranty with annual preventive maintenance visits. All hardware must be new, unused, non-refurbished, and commercially available for at least ten years from government acceptance, with firmware security patches guaranteed for the duration of the warranty. Performance is to occur at Building 1524, Naval Surface Warfare Center, Port Hueneme, California, with delivery and acceptance at the designated receiving location, and the entire period of performance is thirty-six weeks from award, accommodating a thirty-week lead time for equipment. The system must pass a 72-hour continuous IT load burn-in with zero faults before joint inspection and final acceptance, and the contractor must submit as-built drawings, commissioning logs, O&M manuals, and a valid warranty certificate in both digital and physical formats. Pricing is firm fixed price, and award will be made on a lowest-priced, technically acceptable basis, with technical capability and past performance serving as pass/fail gates. All submissions must be in PDF format via email to the designated point of contact by the revised deadline of July 23, 2026, at 3:00 p.m. PST, with no hard copies accepted. Offerors must be registered in SAM, hold a valid CAGE code, represent their small business status, ensure quote validity for 90 days, comply with all specified clauses including DoD unique item identification per MIL-STD-130 and MIL-STD-129, use WAWF for electronic invoicing, and adhere to Buy American requirements, antiterror

Commanding Officer

POSTED

DEADLINE

NOAA: Build to Specifications Power Supply with Fan Trays for the National Logistics Support Center in Grandview, MO.The National Oceanic and Atmospheric Administration (NOAA), under the Department of Commerce’s Eastern Acquisition Division, is seeking to award a firm fixed price contract for nine Power Supplies with Fan Trays built to specific technical standards for delivery to the National Logistics Support Center in Grandview, Missouri. This acquisition is a total small business set-aside under FAR 19.5 using NAICS code 335999, and only registered small business entities are eligible to respond. All offerors must be currently registered in the System for Award Management (SAM) with a valid Unique Entity Identifier (UEI) to be considered for award. Proposals must strictly comply with all items outlined in the Instructions to Offerors, numbered one through ten; failure to address any of these items will result in non-compliance and disqualification. The contract requires full adherence to MIL-STD-129M for packaging, marking, and shipping labeling, including the use of Code 3 of 9 barcodes per MIL-STD-1189B, water-resistant labels with permanent adhesive, and accurate human-readable interpretations matching barcoded data. Each unit must be individually packaged and enclosed in exterior shipping containers marked with the National Stock Number, contract number, CAGE code, CLIN, and serial number. A serial number list must be included inside each container with a clearly affixed label indicating its presence, and packing slips must be waterproofed to MIL-PPP-E540, Class 1 standards. All shipments are to be delivered to 14200 Merritt Road, Grandview, MO 64030, where the Government will perform acceptance. Proposals are due by August 4, 2026, and award will be made based on best value in accordance with FAR 12.203(c)(2), though specific evaluation factors and weights are not disclosed in available documentation. No pricing details, contract value, or payment instructions are provided, and the contracting office is located in Norfolk, Virginia, with Nikki Smith as the primary point of contact.

Department Of Commerce Noaa

POSTED

DEADLINE

DWA Motor Control CentersThe solicitation for DWA Motor Control Centers, identified by number W912EF26QA080, is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by FAR 19.5. The requirement falls under NAICS code 335999 and is issued by the U.S. Army Engineer District Walla Walla, part of the Department of Defense. Offers must be submitted with all required documentation by the deadline of August 5, 2026, at 6:00 PM ET, and failure to include complete materials will result in non-consideration. The place of performance is designated as Ahsahka, Idaho, with a zip code of 83520, and all work must be performed to meet federal specifications and standards. The primary point of contact for questions and correspondence is Kristin Kreutzer, reachable via email at kristin.n.kreutzer@usace.army.mil. Interested parties must access the full solicitation details and submission instructions through the SAM.gov portal using the provided link.

US Army Engineer District Walla Wal

POSTED

DEADLINE

More opportunities from Department Of Defense → Nswc Carderock

Same awarding agency

Digital Meters SupplyThe contract entails the supply of precision digital meters designed for integration into a high-power generation system, with strict requirements for calibration and measurement accuracy in current sensing applications. These meters must meet exacting industry standards to ensure reliable performance within critical military-grade infrastructure, and the successful vendor will be expected to deliver fully tested and calibrated units capable of operating under demanding electrical conditions. Delivery and compliance timelines are tightly constrained, with responses due by July 30, 2026, at 4:00 AM ET, following the posting of the solicitation on July 24, 2026. The contract is classified as a subcontract under NAICS code 334519, which corresponds to other measuring and controlling device manufacturing, and is managed by the Naval Surface Warfare Center Carderock under the Department of Defense. The place of performance is specified as Bethesda, Maryland, with a zip code of 20817, indicating the primary operational and logistical focus of the requirement. The procurement is part of a broader effort to modernize and enhance the precision instrumentation within high-power generation systems, and while no set-aside details or point of contact information are provided, vendors are expected to demonstrate proven expertise in calibrated digital measurement devices suitable for defense-related environments.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Ferrite Cores SupplyThe contract seeks the supply of ferrite cores designed for use in high-power generation equipment, where they play a critical magnetic functionality role. These components are essential for efficient energy conversion and signal control in demanding military and defense applications. The solicitation was posted on July 24, 2026, with a response deadline of July 30, 2026, at 4:00 a.m. Eastern Time, indicating a narrow window for submission. It is classified as a subcontract under the NAICS code 325991, which corresponds to other chemical product and preparation manufacturing, reflecting the specialized nature of the ferrite material production. The place of performance is designated as Bethesda, Maryland, with a ZIP code of 20817, aligning with the location of the Naval Surface Warfare Center, Carderock, the contracting agency under the Department of Defense. Although no specific set-aside classification or point of contact is provided, the contract is part of a broader effort to secure critical magnetic components for defense-grade electrical systems.

Custom Compounding of Purchased Resins

POSTED

DEADLINE

Firing Boards SupplyThe contract entails the supply of firing boards integral to the high-power generation equipment system under a subcontract arrangement with the Naval Surface Warfare Center Carderock, a division of the Department of Defense. The opportunity was posted on July 24, 2026, with a strict response deadline of July 30, 2026, at 4:00 a.m., requiring timely submission of proposals from qualified suppliers. The NAICS code 334418 designates the procurement as related to semiconductor and related device manufacturing, indicating specialized electronic components are needed. Performance of the work is mandated to occur in Bethesda, Maryland, with a postal code of 20817, aligning with the primary operational location of the contracting agency. No set-aside provisions or specific organizational type restrictions are outlined, leaving the opportunity open to eligible federal subcontractors capable of meeting technical and logistical requirements for this mission-critical hardware.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

On-Site System Evaluation and Validation TestingThe contract titled On-Site System Evaluation and Validation Testing requires comprehensive on-site testing to validate the performance of a system with a focus on key technical parameters including low-current stability, ripple reduction, response time, and meter calibration. All testing activities must be performed at the designated location in Bethesda, Maryland, with a zip code of 20817, and must meet stringent technical standards to ensure system reliability and accuracy. The work is classified as a subcontract under NAICS code 541380 and is solicited by the Naval Surface Warfare Center Carderock, an organization within the Department of Defense. Interested parties must submit their proposals by the deadline of July 30, 2026, at 4:00 AM Eastern Time, with the opportunity posted on July 24, 2026. No set-aside designation is specified, and the contract is open to qualified subcontractors capable of executing precise, field-based validation procedures.

Testing Laboratories and Services

POSTED

DEADLINE

System Documentation and Technical Manuals DevelopmentThe contract titled System Documentation and Technical Manuals Development involves the creation and ongoing updates of technical documentation for cooling systems, including detailed installation procedures, maintenance guides, and validation reports for configured equipment. This work is critical to ensuring operational readiness and compliance with technical standards across Department of Defense assets. The project falls under NAICS code 541830 and is classified as a subcontract, with a deadline for responses on July 30, 2026, at 4:00 a.m. Eastern Time. Work is to be performed in Bethesda, Maryland, at the 20817 ZIP code, and the contracting activity is under the Naval Surface Warfare Center Carderock, part of the Department of Defense. The solicitation was posted on July 24, 2026, and is being coordinated through the SAM.gov platform, with no set-aside provisions specified.

Media Buying Agencies

POSTED

DEADLINE

Procurement of Handheld Directional Hemispherical Reflectometer (DHR)The contract is for the procurement of a commercially available Handheld Directional Hemispherical Reflectometer system designed to perform infrared reflectance measurements across six distinct wavebands, fully compatible with existing SOC410 systems. The equipment includes a measurement head, command module, and calibration coupon, ensuring accurate and reliable field measurements without requiring additional integration efforts. The system must meet precise technical specifications to maintain consistency with current operational infrastructure and must be delivered as a complete, ready-to-use unit. This is a total small business set-aside subcontract under the SBA program, designated under NAICS code 334516, and is managed by the Naval Surface Warfare Center Carderock within the Department of Defense. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and the place of performance is specified as 20817. The acquisition is intended to support defense-related measurement and testing operations requiring high-accuracy directional hemispherical reflectance data, with all deliverables expected to be fully functional and calibrated upon receipt.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Environmental Compliance and Hazardous Waste DisposalThis contract involves the management and disposal of hazardous waste generated during painting operations, specifically including paint sludge, solvents, and volatile organic compounds, in strict adherence to RCRA, EPA, and Department of Defense regulations. The work is scoped as a subcontract under a total small business set-aside designation, reserving eligibility exclusively for small businesses as defined by the SBA, with the NAICS code 562219 reflecting hazardous waste collection and treatment services. Performance of the contract is required to take place in Bethesda, Maryland, with a submission deadline of July 31, 2026, and the solicitation was posted on July 23, 2026, indicating a brief seven-day window for proposals. The contracting entity is the Naval Surface Warfare Center Carderock under the Department of Defense, emphasizing the need for compliance with federal and military environmental standards throughout all phases of waste handling, storage, transportation, and final disposal.

Other Nonhazardous Waste Treatment and Disposal

POSTED

DEADLINE

Unique Item Identification (UID) and Data Matrix Marking ServicesThis contract requires the application of Data Matrix markings in strict compliance with MIL-STD-130 and associated standards to enclosures, ensuring each asset is uniquely identifiable for military asset tracking. The work involves accurately marking items with machine-readable data matrices that contain critical information for the U.S. Department of Defense’s Item Unique Identification system, and the successful contractor must also submit all relevant data to the IUID registry to maintain accurate and up-to-date asset records. All marking processes must meet military specifications for durability, readability, and placement to ensure long-term functionality under operational conditions. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns as defined by the SBA can bid, with the NAICS code 811212 indicating the work falls under repair and maintenance services. It is solicited by the Naval Surface Warfare Center Carderock, part of the Department of Defense, with performance expected in Bethesda, Maryland. The opportunity was posted on July 23, 2026, with responses due by July 31, 2026, and is aimed at securing a capable small business to support DoD asset management through precise and compliant UID labeling and registry submission.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Fiberboard and Packaging Materials SupplyThe contract calls for the supply of fire-retardant and weather-resistant corrugated fiberboard boxes that meet the specifications of PPP-F-320 and applicable military shipping standards, specifically for the transportation of painted enclosures. All packaging must be engineered to withstand rigorous environmental conditions and handling during military logistics operations, ensuring product integrity and compliance with federal defense requirements. The materials must be manufactured to exacting standards to protect sensitive equipment from moisture, temperature extremes, and potential ignition hazards during transit. This is a total small business set-aside under the SBA program, limited exclusively to small businesses as defined by the NAICS code 322220 for paperboard container manufacturing. The opportunity is issued by the Naval Surface Warfare Center Carderock under the Department of Defense, with performance required in Bethesda, Maryland, at the zip code 20817. The solicitation was posted on July 23, 2026, and responses are due by July 31, 2026, at 4:00 PM Eastern Time. Interested parties must be structured as qualified small businesses to be eligible for award.

Paper Bag and Coated and Treated Paper Manufacturing

POSTED

DEADLINE

Fire-Retardant Treated Lumber and Plywood SupplyThe contract calls for the supply of fire-retardant treated lumber and plywood that meets the military specification MIL-L-19140, Type II, Category I, specifically intended for use in packaging or structural support during painting operations. The materials must comply with stringent fire-retardant standards to ensure safety and performance in defense-related applications. The requirement is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, and falls under NAICS code 321991 for other wood product manufacturing. The place of performance is designated as Bethesda, Maryland, with a ZIP code of 20817, and the contracting activity is managed by NSWC Carderock under the Department of Defense. The solicitation was posted on July 23, 2026, and responses are due by July 31, 2026, at 4:00 PM Eastern Time.

Manufactured Home (Mobile Home) Manufacturing

POSTED

DEADLINE

Surface Preparation and Abrasive Blasting ServicesThe contract entails metal surface cleaning, degreasing, and abrasive blasting to achieve SSPC-SP 10/NACE No. 2 near-white metal standards for proper coating preparation, ensuring surfaces meet strict industrial specifications for long-term durability and adhesion. This work is critical for maintaining structural integrity and corrosion resistance in defense-related applications and must be performed with precision to comply with the specified near-white metal finish requirements. Issued as a total small business set-aside under SBA guidelines and classified under NAICS code 562910, the contract is a subcontract solicited by the Naval Surface Warfare Center Carderock, part of the Department of Defense. The opportunity was posted on July 23, 2026, with responses due by July 31, 2026, and performance is expected to occur in Bethesda, Maryland, ZIP 20817. Only small businesses are eligible to bid, and the work must be completed in alignment with federal procurement standards for defense infrastructure support.

Remediation Services

POSTED

DEADLINE