Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

High-Speed Data Processing Hardware Supply

Active

Federal

Response Deadline07/30/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA Shared Services Center is seeking a small business to supply a commercial off-the-shelf 1U Paraid X-5000 data processing unit designed for telemetry decomposition with IRIG time code synchronization, supporting PCM bit sync rates up to 30 Mbps and featuring embedded audio and serial outputs. The requirement is for a fully compliant, ready-to-deploy hardware solution capable of high-speed data handling in demanding aerospace environments, with performance tailored to mission-critical telemetry applications. The contract is structured as a total small business set-aside under FAR 19.5, aligned with NAICS code 334118, and responses are due by July 30, 2026, with the anticipated place of performance located in Edwards, California, where the equipment will be integrated and tested for operational use.

General Info

Small business contract for 1U Paraid X-5000 telemetry processor with IRIG sync, 30 Mbps support, due July 30, 2026, Edwards, CA.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334118 - Computer Terminal and Other Computer Peripheral Equipment ManufacturingView NAICS

Place of Performance

Edwards, CA, 93523, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 06:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of a commercial off-the-shelf 1U Paraid X-5000 data processing unit for telemetry decomposition with IRIG time code, PCM bit sync up to 30 Mbps, and embedded audio/serial outputs.

Similar Contracts

Same NAICS industry code

INL_RFQ-PR16105152 3D printers and supplies

American Embassy Bogota - Nas

POSTED

about 18 hours ago

DEADLINE

Vendor TBDThe District of Columbia’s Department on Disability Services is forecasting a future procurement for self-service kiosks designed for micro markets and hybrid environments, though the vendor has not yet been identified. This anticipated contract aims to support accessibility and operational efficiency through automated retail solutions that align with the agency’s mission to serve individuals with disabilities. The solicitation is published as a forecast with no official solicitation number, indicating it is currently in the planning phase and not yet open for bids. The contract will focus on deploying kiosk technology that enables convenient, contactless access to goods and services within facilities operated by or partnered with the Department on Disability Services. While details such as NAICS codes, set-aside classifications, and specific performance locations have not been defined, the procurement is expected to prioritize equitable access, user-friendly interfaces, and seamless integration with existing service delivery models. Interested parties should monitor the official portal for updates, as formal solicitation documents and bid opportunities will be released at a later date.

Department on Disability Services (DDS)

POSTED

DEADLINE

Parraid X-5000 w/ Omega NExT software licenseThe contract solicitation for the Paraid X-5000-1BD-002 Compact 1U Decom Processing Unit and the OMEGA-NEXT Professional software license bundle (NEXT-PRO-02) is a total small business set-aside under NAICS code 334118, with a firm-fixed-price structure and a lowest price technically acceptable evaluation methodology. The solicitation mandates delivery of exactly one unit of each item to NASA Armstrong Flight Research Center in Edwards, California, no later than February 1, 2027, under FOB Destination terms, with inspection and acceptance occurring at that location. All quotes must be submitted exclusively in PDF format via email to Cara Craft at NASA Shared Services Center by July 30, 2026, at 1:00 p.m. Central Time; submissions in any other format will be rejected outright. Vendors must provide manufacturer proof of pricing and reseller authorization, and the contract value is not predetermined, with the final price to be determined upon award and explicitly noted as TBD in the contract clause. The contract imposes stringent compliance obligations, including adherence to export control regulations under ITAR and EAR, requiring licenses for hardware, technical data, software, and technical assistance, particularly where foreign persons are involved or work is performed on-site at NASA facilities. Contractor personnel must undergo Personal Identity Verification under HSPD-12 for facility access, and all employees must be informed of whistleblower protections. Unauthorized release of sensitive information is prohibited, and duty-free entry must be claimed and documented for any imported goods. The contractor is also required to maintain SAM.gov registration, provide a valid CAGE code, and self-certify small business status. While no formal packaging, preservation, or marking standards are detailed, all shipments must be clearly labeled with “UNITED STATES GOVERNMENT” and the contracting agency’s name, include the contract number, delivery address, and carrier details, and support duty-free entry claims. No government property is to be furnished, and accelerated payments to small business subcontractors are required. There are no option periods, key personnel requirements, or organizational conflict of interest clauses specified, and no evaluation factors beyond technical acceptability and lowest price are provided.

NASA Shared Services Center

POSTED

DEADLINE

CISCO Call Server Hardware SupplyThe contract is for the procurement and delivery of physical Cisco call server hardware units to support a unified communications system in Kingston, Jamaica, under the auspices of the Government of Jamaica through the Planning Institute of Jamaica. The hardware is essential for enabling reliable voice and communication services within the government’s infrastructure, with the place of performance firmly located in Kingston. The solicitation is classified as a subcontract and falls under the NAICS code 334118, which pertains to other communications equipment manufacturing. The contract was posted on July 22, 2026, with bids due by August 14, 2026, at 4:59 AM, indicating a narrow window for proposal submissions. Although no specific set-aside or procurement preference is indicated, the procurement is managed through the Government of Jamaica’s electronic procurement portal, with all relevant documentation accessible via the provided UI link. The absence of detailed contact information or geographic specifics in the address fields suggests that logistical coordination and delivery arrangements will be finalized by the selected vendor in alignment with government requirements.

Planning Institute of Jamaica

POSTED

DEADLINE

DISK DRIVE UNITThe contract pertains to the procurement of six Disk Drive Units under NSN 7025-01-615-5219, issued as a fully competitive solicitation through the Department of Defense via the DLA, with solicitation number SPE8EN-26-T-2663. The request is for delivery within 167 days of award, with performance located in Tracy, California, 95304-5000. The solicitation is open until August 3, 2026, and requires compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, as well as applicable technical and quality requirements listed in the DLA Master List. All supplies must adhere to DLA packaging standards, and government identification must be removed from non-accepted items. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes must be verified at designated levels or AQLs. Drawings are accessible during the open solicitation period via the DIBBS portal, and the acquisition falls under NAICS code 334118 for computer and peripheral equipment manufacturing. Primary point of contact is Jennifer Esworthy, reachable via email and phone provided.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

MICROCIRCUIT, DIGITAThis contract is for the procurement of five digital microcircuits under Federal Supply Class 5962, with the NSN 5962010972446 and part number 615677-901 from Raytheon Company, or an equivalent approved source. The item is classified as a critical application component, requiring strict adherence to supply chain traceability, counterfeit prevention, and packaging standards mandated by the Defense Logistics Agency. All suppliers must be listed on the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, and must comply with DLA Procurement Note C03 regarding retention of supply chain documentation. Traceability and test reports must be submitted electronically via email at least 15 days before delivery, limited to 15 megabytes per email, with filenames formatted to include contract number, CLIN, and NSN. Shipment cannot occur until written authorization is received from the contract administrator, and each lot must include a completed DLA Land and Maritime Form 918 and proof of shipment authorization inside the packaging. Failure to comply voids payment. The microcircuits must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific requirements for lead finish identification per IPC/JEDEC J-STD-609, including clear labeling of lead content (Pb or Pb-Free). ESD and EMI protections are mandatory under MIL-PRF-81705, requiring Type I and Type III barrier materials from qualified manufacturers listed on QPL-81705. Cushioning must meet A-A-59136, Class 1, Grade B, with densities between 1.7 and 2.2 pounds per cubic foot and a minimum thickness exceeding the lead length by at least 1/8 inch, or use form-fitting ESD containers that immobilize components. The delivery point is origin, with inspection and acceptance at destination, and the final shipment due date is January 5, 2027, with an original required delivery date of January 20, 2027. All documentation, packaging, and marking must reflect current DLA directives, and suppliers are responsible for ensuring compliance with all technical and quality requirements referenced in the DLA Master List and procurement notes.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CONVERTER, DIGITAL TThis contract, issued by the Defense Logistics Agency under solicitation SPE8EN-26-T-2657, requires the procurement of six digital converter units, part number BB-485LDRC9, with an NSN of 7050016988695, at a unit price of $6.00 for a total contract value of $36.00. Delivery is required within 167 days after award, with shipment FOB origin to the designated receiving warehouse at 25600 S Chrisman Road, Tracy, CA 95304-5000, and inspection and acceptance will occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E using preservation method 10 (clean/dry), fiberboard boxes for unit and intermediate containers, and a unit pack code U, while marking and labeling adhere to MIL-STD-129 with no special marking required. Palletization follows DLA’s RP001 packaging requirements, and all materials must be shipped using WAWF for invoicing and receiving report submissions. The contract incorporates stringent technical, environmental, and compliance obligations referencing the DLA Master List of Technical and Quality Requirements and prohibits the intentional addition of mercury or mercury-containing compounds to supplied hardware, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing items requiring shockproof design and secondary containment per NAVSEA 5100-003D. Hazardous materials must be labeled per OSHA’s Hazard Communication Standard, with pre-award submission of safety data sheets required, and transportation by sea mandates the use of U.S.-flag vessels unless a formal waiver is obtained at least 45 days in advance, with post-shipment documentation of vessel flag, cargo details, and freight records mandatory. The contract includes multiple FAR and DFARS clauses covering cybersecurity safeguards under NIST SP 800-171, trafficking in persons, employment eligibility verification, sustainable products, whistleblower protections, electronic payment compliance, and prohibitions on acquisition of covered defense telecommunications equipment or hexavalent chromium. Offerors must self-certify their small business status, provide UEI and CAGE codes where applicable, and comply with all representations and certifications, including disclosures related to joint ventures or covered defense telecommunications. Although the contract type and evaluation methodology are not explicitly stated, award is subject

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

KEYBOARD, DATA ENTRYThe contract is for the procurement of 16 keyboard, data entry units under solicitation SPE8EN-26-T-2651, with a total price of $256.00 at $16.00 per unit. Delivery is required within 128 days FOB origin, with inspection and acceptance point at destination, and no variance in quantity is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, material specifications, and unit packaging code U, with marking in accordance with MIL-STD-129 and no special marking required. Palletization must adhere to DLA packaging requirements, and the shipment is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 7025-01-605-4972 and is subject to restrictions on mercury and mercury-containing compounds, which are prohibited from intentional addition or direct contact with supplies unless exempted for specific functional uses such as batteries, lighting, or instrument controls as defined by NAVSEA, with portable devices containing mercury requiring shock-proof design and a secondary containment boundary. The contract incorporates technical and quality requirements referenced in the DLA Master List, and covered defense information applies to the supplier. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, under NAICS code 334118, managed by the Department of Defense under the Construction & Equipment T & IFO EQ office, with point of contact Jennifer Esworthy.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

COMPUTER SUBASSEMBLThis contract pertains to the procurement of a computer subassembly identified by NSN 7050-01-659-4670 and part number 1756-IF8I, supplied by ROCKWELL AUTOMATION, INC., with a total quantity of three units. The items must be delivered FOB origin within 167 days from the contract award, with no tolerance for variance in quantity. Delivery is required to the designated warehouse in Tracy, California, and all packaging must comply fully with MIL-STD-2073-1E and DLA’s packaging requirements, including adherence to MIL-STD-129 marking standards and specific packing methods such as preservative treatment, intermediate container use, and unit packaging code U. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for functional uses in batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof construction and secondary containment in accordance with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling compliance. The contract includes provisions for inspection and acceptance at destination and references DLA transportation procedures for shipping and delivery logistics. The solicitation number is SPE8EN-26-T-2655, issued under a federal acquisition framework with a response deadline of August 3, 2026, and the original required delivery date is September 21, 2026, with a need ship date of January 18, 2027.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

COMPUTER SUBASSEMBLThis contract specifies the procurement of a computer subassembly identified by NSN 7050016942565 and part number 1756-L81E from ROCKWELL AUTOMATION INC, with a quantity of four units to be delivered FOB origin within 167 days. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containment, while marking must follow MIL-STD-129 with no special marking codes. The delivery destination is Tracy, California, to DLA District San Joaquin, with inspection and acceptance occurring at the point of delivery and no variance allowed in quantity. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, or specified instruments, and any portable devices containing mercury must include shock-proofing and a secondary containment boundary per NAVSEA standards. The contract falls under solicitation SPE8EN-26-T-2666, originally posted on July 22, 2026, with a response deadline of August 3, 2026, and is classified under NAICS code 334118. Transportation and shipping instructions are governed by DLA procedural notes C19 and C20, and the unit of issue is governed by DoD standards referenced via an official DLA Excel sheet. The point of contact for the procurement is Jennifer Esworthy, and the purchase request number is 7017585620, with a total contract value based on a unit price of $4.00 per item. The original required delivery date was October 16, 2026, with a need ship date of January 18, 2027, indicating potential scheduling flexibility. The contract also includes provisions for the removal of government identification from non-accepted supplies and designates the covered defense information provisions as potentially applicable.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

CAMERA, TELEVISIONThe contract solicitation is for five units of CAMERA, TELEVISION with NSN 5820-01-697-7192, issued under solicitation number SPE4A7-26-T-9343 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The response deadline is July 27, 2026, with a required delivery timeframe of 82 days after order. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions effective as of the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Packaging must comply with DLA packaging requirements, and any non-accepted supplies must have government identification removed prior to return. Documentation for source approval requests is mandatory, and covered defense information requirements may apply. The place of performance is NEW CUMBERLAND, PA 17070-5002, with Christian Roberson designated as the primary point of contact for inquiries.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

KEYBOARD, DATA ENTRYThis contract is for the procurement of five keyboard, data entry units under solicitation SPE8EN-26-T-2670, with a required delivery within 20 days of award, delivered FOB destination to the USS NORTH DAKOTA SSN 784 at FPO AE 09578-2303. The item is identified by NSN 7025-01-574-9308 and must be supplied in strict conformance to MIL-STD-2073-1E packaging standards, including the use of packaging code U, preserved in accordance with method 10, and marked in full compliance with MIL-STD-129 without special marking. All deliveries must be shipped using the fastest traceable means excluding parcel post, as stipulated by DLA procedures, and must be palletized according to DLA Packaging Requirements. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents authorized by NAVSEA, and any portable devices containing mercury must include a second boundary of containment per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements via R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The unit of issue is each, with no variance permitted in quantity, and pricing is fixed at $5.00 per unit totaling $25.00. Inspection and acceptance occur at the destination point. The supplier is required to comply with all government shipping and marking procedures, and the contract includes specific logistics identifiers including RDD 777 and TCN V2003761945202. This solicitation is issued under NAICS code 334118 by the Department of Defense for federal procurement, with a response deadline of August 3, 2026, and a required delivery date of July 20, 2026, with no flexibility on delivery or quantity.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

SCBA Breathing Air Line InstallationThe contract is for the installation of a SCBA-compatible breathing air line designed to extend to the ladder tip, enabling firefighters to maintain a continuous and reliable supply of breathable air during elevated operations. This system is critical for ensuring responder safety when performing tasks at height, eliminating the need to rely solely on portable SCBA tanks and reducing the risk of air supply interruption during emergencies. The work must be executed to strict technical standards that guarantee compatibility with standard SCBA equipment and structural integrity under operational stress. The solicitation was posted on July 24, 2026, with a response deadline of August 3, 2026, and is classified as a subcontract under NAICS code 332999 for other fabricated metal product manufacturing. The project is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required at Stennis Space Center in Mississippi, zip code 39529. While no set-aside details or point of contact information are specified, the scope clearly targets qualified subcontractors capable of delivering engineered breathing air systems for high-risk firefighting environments.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Rescue Tool Mounting System (Pac Mounts & Carousel Mounts)The contract involves the supply and installation of specialized mounting systems for rescue tools, specifically Pac Mounts for hand tools and carousel mounts for Hurst/TNT e-tools, to ensure secure and easily accessible storage aboard fire and rescue vehicles. These mounting solutions must meet rigorous operational standards to support rapid deployment in emergency scenarios while maintaining tool integrity and vehicle space efficiency. The work is required at Stennis Space Center, Mississippi, with a delivery and installation timeframe governed by a response deadline of August 3, 2026. The contract is classified as a subcontract under NAICS code 332323, which pertains to metal fabrication, and is being managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. All components must be compatible with existing rescue vehicle configurations and adhere to safety and durability requirements expected in high-stress environments.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 18 hours ago

DEADLINE

Thermal Imaging Camera Supply (FLIR K-85N or Equivalent)NASA Shared Services Center is seeking suppliers to provide FLIR K-85N thermal imaging cameras or an approved equivalent for integration into Ladder/Tower Units used in firefighting and rescue operations at Stennis Space Center. The cameras must meet operational requirements for enhanced visibility in low-light and smoke-filled environments, ensuring safety and effectiveness during emergency response scenarios. This subcontract opportunity has a response deadline of August 3, 2026, and falls under NAICS code 334510 for navigation, measuring, electromedical, and control instruments manufacturing. The equipment will be deployed at a specified performance location in Stennis Space Center, Mississippi, with no set-aside classification applied. All proposals must be submitted prior to the deadline to be considered for award.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

Power Inverter Supply & IntegrationNASA Shared Services Center is seeking a subcontractor to supply and integrate an 8,000-watt continuous power inverter with a 9,000-watt peak capacity to enable 110VAC shoreline power for charging rescue tools on a vehicle. The inverter must reliably convert shore power into stable AC output suitable for mission-critical emergency equipment, ensuring operational readiness at the Stennis Space Center location with ZIP code 39529. The solicitation is open for responses until August 3, 2026, under NAICS code 335313, which corresponds to electric lighting equipment manufacturing. The contract type is classified as a subcontract, and while no set-aside program is specified, all interested parties must meet technical and integration requirements aligned with NASA’s operational standards for safety, durability, and power efficiency in field-deployed systems.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

Generator Supply & Installation (CARB-Compliant)The contract calls for the supply and installation of a 5300W generator that meets California Air Resources Board (CARB) compliance standards, designed to be a Honda-equivalent unit integrated directly into a vehicle’s existing power system for emergency operational use. The generator must be fully compatible with the vehicle’s electrical architecture to ensure seamless power delivery during critical scenarios, with emphasis on reliability, emissions compliance, and minimal environmental impact. Installation must be performed to industry-standard protocols to maintain vehicle warranties and operational integrity. This subcontract is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required at Stennis Space Center, Mississippi, 39529. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026, at 7:00 PM Eastern Time. The North American Industry Classification System code 333111 indicates the scope falls under generator manufacturing and related equipment production. The contract is not subject to any specific set-aside designation, and while no point of contact is provided, all submissions must adhere to the terms outlined in the SAM.gov posting.

Farm Machinery and Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Fire Apparatus Customization & IntegrationThe contract involves the customization and integration of a Ladder/Tower Unit fire rescue vehicle designed to meet NFPA 1901 standards, requiring extensive chassis modification, body fabrication, and full integration of electrical and hydraulic systems. This specialized work ensures the vehicle is engineered for optimal performance in emergency response scenarios, with all components compliant with national safety and operational requirements. The project demands precision in assembly and system coordination to guarantee reliability under high-stress conditions typical of fire and rescue operations. The work is to be performed at Stennis Space Center with a zip code of 39529, and submissions are due by August 3, 2026, by 7:00 PM. This is a subcontract opportunity under NAICS code 336212, which classifies it within the Motor Vehicle Body Manufacturing sector. The contracting entity is the NASA Shared Services Center, operating under the National Aeronautics and Space Administration, although specific point of contact details are not provided. The solicitation was posted on July 24, 2026, and interested parties must respond through the designated SAM.gov portal before the deadline.

Truck Trailer Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Brand-Name or Equivalent Capability Trunk CablesNASA Shared Services Center is seeking specialized trunk cables with eight bundled sub-cables, each containing color-coded conductors in red, brown, yellow, orange, violet, gray, blue, and green. The requirement is for brand-name or equivalent capability cables with no installation or additional value-added services included. This contract is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the NAICS code 334516. The solicitation was posted on July 24, 2026, with proposals due by July 28, 2026. Performance of the contract will be carried out at Stennis Space Center, Mississippi, with a zip code of 39529. All submissions must meet the technical specifications outlined for the cable configuration and comply with the small business set-aside requirements.

Analytical Laboratory Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

HPX-1 Plus Computed Radiography System

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

The contractor shall provide machining services for approximately 250 Government-furnished GRX-810 additive manufactured (AM) tensile blanks in accordance with the attached drawings and specifications. The Government will furnish the GRX-810 blanks. The cThe contractor is required to provide machining services for approximately 250 Government-furnished GRX-810 additive manufactured tensile blanks in strict accordance with provided drawings and specifications. GRX-810 is a nickel-based superalloy exclusively furnished by the Government and may not be substituted or procured by the contractor under any circumstance. All work must be completed and delivered to NASA Glenn Research Center in Cleveland, Ohio, within a lead time of twelve weeks or less, with delivery terms specified as FOB Destination, meaning risk of loss and title transfer occur upon arrival at the destination. The contract is a Firm-Fixed-Price award under a Total Small Business Set-Aside using the Lowest Price Technically Acceptable (LPTA) evaluation method, where offers must be technically acceptable to be eligible for award, and the lowest-priced compliant offer will be selected. Offerors must submit their bids via email to Shanna L. Patterson at Shanna.l.Patterson@nasa.gov, clearly referencing the solicitation number 80NSSC26938931Q in the subject line, and include their CAGE/UEI code, FOB destination, lead time for delivery, and point of contact name and email. Payment will not be made by credit card and is subject to Government payment procedures. The contractor must comply with all applicable export control regulations including ITAR and EAR, particularly regarding access to controlled technical data at the delivery site by foreign persons, and obtain necessary export licenses in advance. Duty-free entry provisions under FAR 52.225-8 apply if foreign-sourced supplies exceed $20,000 in value, requiring advance notification to the Contracting Officer, proper marking of packages with “UNITED STATES GOVERNMENT” and agency title, inclusion of shipping documents, and adherence to customs regulations under 19 CFR Part 142. The contractor must maintain complete records of export compliance and flow down applicable clauses to subcontractors. All deliveries must be properly documented with the contract number, delivery address, carrier details, and notation of duty-free entry. The contracting office is the NASA Shared Services Center located at Stennis Space Center, Mississippi, and only small business entities registered in SAM.gov with accurate CAGE/UEI information are eligible to respond. No contract value has been disclosed and will be determined upon award based on submitted pricing.

POSTED

about 18 hours ago

DEADLINE

Braiding Machine

Analytical Laboratory Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

AAR Mobility SystemsThe contract opportunity titled AAR Mobility Systems under solicitation number 80NSSC26937581Q is a total small business set-aside as defined under FAR 19.5, targeting small business concerns for award. It was posted on July 24, 2026, with a response deadline of July 27, 2026, at 9:00 PM CT, suggesting a short turn-around period for submissions. The solicitation is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with the office located at Stennis Space Center, Mississippi, and the place of performance specified as Edwards, California, 93523. The NAICS code 332999 indicates the nature of the work involves other miscellaneous manufacturing, which may relate to mobility systems or specialized equipment support. Primary and secondary points of contact are Tracy Bremer and Will Garrett, both reachable via NASA email addresses. The contract is classified as combined, suggesting it may integrate elements of both acquisition and service procurement, though specific deliverables, pricing, performance timelines, evaluation criteria, and technical requirements are not accessible due to system errors and unauthorized access issues. No contract clauses, specifications, packaging requirements, inspection standards, or special conditions are available, and the estimated contract value remains unspecified. All solicitation documents including the RFQ, SOW, and Q&A are referenced as attached but unavailable for review in this context.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Capability Trunk CableVendors must submit quotes for Capability Trunk Cable under solicitation number 80NSSC26934493Q-1, a total small business set-aside with NAICS code 334516, issued by the NASA Shared Services Center at Stennis Space Center, Mississippi. The requirement is brand name or equivalent, and responses must reference the tracking number in the email subject line. Delivery must be FOB destination, with specified leadtime included in the bid, and vendors are required to provide their CAGE/UEI code. Payment will not be made by credit card. The point of contact for this solicitation is Shanna Patterson, reachable at shanna.l.patterson@nasa.gov. All bids are due by July 28, 2026, and the contract is targeted for performance at Stennis Space Center, MS, 39529.

Analytical Laboratory Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE