Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

High-Speed Digitizer Module Supply

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the procurement of a high-speed digitizer module designed for precision signal acquisition in PXIe format. The required hardware must support either a 5.4GS/s single-channel or a 2.7GS/s dual-channel configuration with 12-bit resolution. The contract is issued by the Department of Energy through the Slac National Accel Labor contractor, with the place of performance located in Menlo Park, California. Interested parties must submit their responses by August 20, 2026, following the posting date of August 12, 2026. The procurement falls under NAICS code 334511.

General Info

DOE procurement for PXIe high-speed digitizer modules in Menlo Park by August 20, 2026.

Agency

Department Of Energy → Slac National Accel Labor -Doe ContractorView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Menlo Park, CA, 94025, USA

Set-Aside

NONE

Documents

This scope was carved out of SLAC_367517_PXleModule.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PXle Module

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Energy → Slac National Accel Labor -Doe Contractor
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Procurement of a 5.4GS/s single-channel or 2.7GS/s dual-channel, 12-bit high-speed digitizer module for precision signal acquisition in PXIe format.

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
PAD, ELECTRODE, DEFIBRIL
Solicitation # SPE2DS-26-T-334Q
This contract is for the procurement of one package containing five sets of Smart Pads III disposable multifunction defibrillation electrodes, identified by NSN 6515-01-604-9504. These pads are designed for use with adult patients and can be adapted for infant or child patients using an optional key. They are compatible with FR2 HeartStart and manual defibrillators and support a range of functions including ECG monitoring, external pacing, synchronized cardioversion, and defibrillation. The pads feature off-set tabs for easy placement and can be stored in the FR3 carry case or preconnected to enable routine self-testing. The supplier must adhere to commercial packaging and packing standards, ensuring each unit is sealed to prevent damage and shipped in suitable exterior containers for safe delivery to San Antonio. All materials must be marked according to Medical Marking Standard No. 1. The contract incorporates specific DLA technical and quality requirements, including guidelines for the removal of government identification from non-accepted supplies. Delivery is required within five days after the order is placed.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
BAG, MEDICAL, INTUBATION
Solicitation # SPE2DS-26-T-335T
This contract is for the procurement of two 15-inch medical intubation bags, identified by NSN 6515-01-592-7709 and part number IPP1 from Conterra, Inc. The acquisition is managed by the Department of Defense Medical Supply Chain and is subject to FDA regulation, requiring the contracting official to confirm details with a product specialist. Delivery is required within 20 days after order, with the final destination located at Incirlik Air Base in Turkey. The agreement mandates strict adherence to DLA packaging and quality requirements, specifically citing Medical Marking Standard No. 1 for all material marking. Each unit must be secured in a sealed container and shipped in commercial exterior packaging to prevent damage during transit. Inspection and acceptance will occur at the destination, and the contract incorporates specific technical and quality requirements found in the DLA Master List.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
ANTENNA-RECEIVER-TR
Solicitation # SPE4A7-26-R-XA24
This firm fixed price contract, identified as SPE4A7-26-R-XA24, is for the procurement of 10 antenna-receiver-transmitter radar units, specifically part number BW K222176 from Daimler Truck North America LLC. The items are designated as critical application items with a delivery requirement of 86 days after order. Inspection and acceptance will occur at the point of origin, and the shipment must be packaged according to ASTM D3951 and MIL-STD-129 standards, adhering to DLA packaging requirements. The contract mandates strict compliance with several technical and quality standards, including a CMMC Level 2 self-assessment for cybersecurity and the protection of covered defense information. Quality assurance will be managed through specific sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Additionally, the agreement prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions approved by NAVSEA.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334511
New
DIBBS
COVER, SPECIAL
Solicitation # SPE4A5-26-T-347E
This contract is a solicitation issued by the Department of Defense ASC Supplier Oper OEM Division for the procurement of one special cover, identified by NSN 6615005925091 and Bell Textron Inc part number 574-074-313-001. The item is designated as a critical application item with a required delivery date of August 14, 2026, and a delivery timeline of 20 days. Shipping is FOB Origin, with the final destination being the Taiwan Army Zuo-Ying Ammunition Sub in Kaohsiung City, Taiwan. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance is governed by tailored higher level contract requirements for both manufacturers and non-manufacturers, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additional compliance is required for measuring and test equipment and the removal of government identification from non-accepted supplies.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
Federal
Supply of Digital-to-Digital ConvertersThe Department of Homeland Security, through the Sflc Procurement Branch 1, is seeking a subcontractor for the supply of digital-to-digital converters. These components are intended for use within avionics, communications, or navigation systems and will likely be provided on an on-demand or call-off basis. The procurement falls under NAICS code 334511. Interested parties must submit their responses by August 18, 2026, at 1:00 PM, following the posting date of August 12, 2026.
Sflc Procurement Branch 1(00080)

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
Federal
High-Speed RF Arbitrary Waveform Generator SupplyThis subcontract involves the supply of a high-speed, 16-bit, 9GS/s arbitrary waveform generator designed for RF signal generation applications. The required hardware must feature an 8-channel output, 8 markers, and be provided in a PXIe form factor. The procurement is managed by the Slac National Accel Labor under the Department of Energy. The opportunity was posted on August 12, 2026, with a response deadline of August 20, 2026. Performance of the contract will take place in Menlo Park, California, and the associated NAICS code for this requirement is 334511.
Slac National Accel Labor -Doe Contractor

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
Federal
REPAIR KIT NO.1
Solicitation # N0010426QAC74
This contract pertains to the manufacture and delivery of REPAIR KIT NO.1 under the solicitation number N0010426QAC74, with a delivery window of 90 days from issuance. The item is defined by part number 3286459 and design cage 56232, and must strictly conform to specified material and physical requirements. All components must be marked in accordance with applicable Military Standards: MIL-STD-130 for mechanical parts and assemblies, MIL-STD-1285 or MIL-STD-130 for electrical and electronic parts, MIL-STD-454 for electronic equipment, and MIL-P-15024/5 for electrical equipment. Configuration control is governed by MIL-STD-973, mandating formal submission of engineering change proposals, deviations, and waivers to the designated Contracting Officer with original and two copies required. Government source inspection per FAR 52.246-2 is mandatory, and the contractor retains full responsibility for ensuring compliance, maintaining inspection records for 365 days post-delivery, and implementing an internal quality system that aligns with contractual requirements. Packaging must adhere to MIL-STD-2073 as referenced in the schedule. The contract is issued under a total small business set-aside and is subject to cybersecurity maturity model certification requirements effective November 2025, along with security prohibitions and exclusions outlined in a February 2026 deviation. Payment will be processed through the Navy Wide Area Workflow system using a combined invoice and receiving report, with billing routed to navsupwawf.wss.ftc@us.navy.mil. The contract requires FOB destination delivery and includes special shipping and marking instructions tied to the identifier NUK00860864301. A priority rating for national defense use applies, and the contractor must comply with all applicable naval and defense directives, including restricted document handling procedures for NOFORN and Official Use Only materials. All contractual documents are deemed issued upon electronic transmission or mail deposit, and acceptance of the proposal constitutes binding agreement. Point of contact is Jennifer L. Henry of the Naval Supply Systems Command, Mechanicsburg, PA, reachable via email and phone.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334511
New
Federal
Delta Digital Video Encoder Firmware
Solicitation # FA2486-A066603
The AFTC/PZZC at Eglin Air Force Base intends to award a sole-source, firm-fixed-price contract to Delta Information Systems, Inc. for a firmware upgrade to the Model 6008R Digital Video Encoder. The objective of this modification is to integrate IRIG-106 Chapter 10 User Datagram Protocol capability, allowing the ethernet output to interface seamlessly with compliant recorders and record video channels natively in the IRIG-106 Chapter 10 standard format. This upgrade supports the 896th Test Support Squadron in providing high-quality airborne instrumentation data for the 96th Test Wing. The government has determined that Delta Information Systems is the only capable source for this requirement because the necessary operating firmware and source code are proprietary to the manufacturer. The anticipated award date is August 2026. This acquisition falls under NAICS code 334511 and PSC 5821, and it is not subject to the World Trade Organization Government Procurement Agreement or Free Trade Agreements.
FA2487 Aftc Pzzd (eglin)

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334511
New
Federal
HOUSING ASSEMBLY,GY
Solicitation # SPRMM126QMA05
The solicitation seeks the manufacture and delivery of the HOUSING ASSEMBLY,GY under contract number SPRMM126QMA05, with a response deadline of August 6, 2026. The requirement is governed by a comprehensive set of technical, quality, and administrative clauses, including mandatory compliance with MIL-STD-130 Rev N for marking, adherence to MIL-STD-2073 for packaging, and strict protocols for design changes governed by six defined code categories that dictate the nature and approval process for any substitutions. Inspection responsibilities rest with the contractor, but the government retains the right to conduct independent verification, and all inspection records must be maintained for 365 days after final delivery. The contractor must be an authorized distributor of the original equipment manufacturer, with proof of authorization required at submission, and must include the manufacturer’s CAGE code and part number if not the OEM. Electronic submission of invoices and receiving reports through PIEE-WAWF is mandatory, and all contractual documents are considered issued upon electronic transmission. The item is subject to the Buy American Act and related trade agreements, with no available technical drawings, and performance must occur at the designated production facility unless a formal change request is approved with a $250 administrative cost reduction. The solicitation falls under SEPA-EAF authority, and all documents must comply with Navy distribution statement guidelines, particularly those addressing export controls and classified information handling. Contractors are expected to register for the Electronic Document Access portal and subscribe to Navy Electronic Commerce Online notifications to stay current with contract actions.
SPRMM1 DLA Mechanicsburg

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
Federal
NOAA/OMAO/PAE - C-130J Hercules Vertically Scanning Doppler Radar Transmitter System
Solicitation # 140800-26-0157
The Department of Commerce NOAA is seeking a contractor for the C-130J Hercules Vertically Scanning Doppler Radar Transmitter System under solicitation number 140800-26-0157. This special notice was posted on August 12, 2026, with a response deadline of August 26, 2026, at 2:00 PM. The project is managed by the office located in Norfolk, Virginia, with the actual place of performance situated in Lakeland, Florida. Interested parties should direct inquiries to the primary point of contact, Jennifer Peters.
Department Of Commerce Noaa

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334511
New
Federal
NAWCAD WOLF AN/APN-246 Beacon Systems and Components
Solicitation # N6833526RFI0527
The Naval Air Warfare Center Aircraft Division is seeking information for the fabrication, procurement, and delivery of AN/APN-246 Beacons and components. These beacons serve as the aircraft interface for the US carrier fleet Precision Approach and Landing System, supporting critical guidance and landing capabilities. All equipment must comply with the 2015-0011-30848-B Systems Requirements Document, which is available to authorized DoD contractors upon request. This is a Request for Information and Sources Sought notice rather than a formal solicitation, intended for planning purposes to identify capable industry sources. Interested companies must provide administrative details, business size, and capability information, including whether they are the original equipment manufacturer or an authorized distributor. Responses must be submitted via email to the designated point of contact within five business days of the notice release.
Navair Warfare Ctr Aircraft Division

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
Federal
Spectrum Analyzer
Solicitation # FA460026Q0077
The Department of Defense, through the 55th Contracting Squadron, is soliciting quotes for a Firm Fixed Price contract to procure a spectrum analyzer for the 55 CS/SCXF Installation Spectrum Management. This total small business set-aside is categorized under NAICS 334511 for Diagnostic, Measuring and Testing Equipment. The required device must be either a desktop or handheld unit capable of electromagnetic analyses with a minimum frequency range of 2 Hz to 85 GHz, featuring specific capabilities for 5G-NR, LTE, WLAN, and pulsed radar measurements. Deliverables include the analyzer, a recommended antenna set for mobile operations, a transportation case, a five-year warranty and calibration, and necessary training. The procurement process follows a technical acceptability pass/fail gate, where quotes are evaluated based on a technical plan not exceeding five pages. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, with evaluation starting from the lowest Total Evaluated Price until three technically acceptable quotes are identified. The final response deadline was extended to August 18, 2026, at 11:00 AM CDT, with a requested delivery date of September 12, 2026, to Offutt AFB, Nebraska. Payment and receiving reports must be processed electronically via the Wide Area Workflow (WAWF) system.
FA4600 55 Cons Pkp

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Energy → Slac National Accel Labor -Doe Contractor

Same awarding agency

NAICS: 334310
New
Federal
PXIe Chassis Supply and Integration SupportThis subcontract involves the supply of a 6-slot PXIe-based chassis designed to house AWG and digitizer modules, with the potential for basic integration and compatibility support. The project is managed by the Slac National Accel Labor under the Department of Energy, with the place of performance located in Menlo Park, California. The solicitation was posted on August 12, 2026, with a response deadline of August 20, 2026. The contract falls under NAICS code 334310, focusing on the procurement of specialized hardware for scientific or industrial applications.
Audio and Video Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 3333
New
Federal
PXle Module
Solicitation # SLAC_367517_PXleModule
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for a firm fixed price procurement of specialized hardware. The required items include one P9484M 9GS/s 16Bit RF AWG PXIe Module, one AWT 5.4GS/s digitizer option, and one PXE6410 6 Slot PXIe Based Chassis with an embedded controller. Technical acceptability is based on specific requirements for two analog inputs, 16-bit DAC resolution, a 5.4Gs/s ADC sample rate, and a chassis-based embedded controller. Source selection will follow the Lowest Priced Technically Acceptable method, with a secondary emphasis on the best lead time. Quotations are requested by August 18, 2026, and should be sent to Jhamie Serena. The procurement is subject to various federal regulations and SLAC terms and conditions, including the Buy American Act for items exceeding a unit price of 15,000 dollars. All subcontractors must be registered in the System for Award Management and provide a Representations and Certifications Rider. Shipping terms are FOB Destination Prepaid and Add for domestic suppliers and CIP SLAC, Menlo Park, Duty Unpaid for foreign suppliers. Payment terms are set at NET-30. The contract incorporates numerous FAR and DEAR clauses governing labor standards, small business utilization, and export controls, and requires the provision of Harmonized Tariff Schedule and Export Control Classification Numbers where applicable.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 3333
New
Federal
FDG 150 Floating Ion
Solicitation # SLAC_FDG150FloatingIon_365033
SLAC National Accelerator Laboratory is seeking quotes for one FDG 150 floating ion source package. The required equipment must feature a noble gas ion beam with specific current and energy capabilities, an electrostatic lens with a 50 mm working distance and beam scan area, and full remote operability via TCP/IP network integration into an EPICS system. Mechanically, the unit must be compatible with ultra-high vacuum end stations, utilizing a standard CF2.75 inch O.D. UHV flange and maintaining a base pressure below 1 times 10 to the power of negative 9 torr. The procurement will be awarded based on the lowest priced technically acceptable method and the best lead time, with quotes due by August 18, 2026. This is a product-only acquisition with no on-site services permitted, and the resulting purchase order will be on a fixed-price basis with NET-30 payment terms. Suppliers must be registered in the System for Award Management and provide HTS and ECCN codes where applicable. Buy American Act certification is required for awards exceeding a unit price of 15,000 dollars.
Commercial and Service Industry Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334111
New
Federal
HPE Servers
Solicitation # 365862_01(RE)
SLAC National Accelerator Laboratory, operated by Stanford University under contract with the Department of Energy, is seeking proposals for HPE Servers under solicitation number 365862_01(RE). Although this procurement is not a federal acquisition and is not governed by the Federal Acquisition Regulations, it remains subject to applicable federal laws, executive orders, and contractual requirements that influence SLAC’s approved purchasing system. The solicitation requires vendors to provide a U.S. domestic end item source and mandates full compliance with all documentation specified in the attached RFP package, including completion of every form referenced in the cover letter. Proposals must be submitted by the deadline of Friday, August 13th, 2026, at midnight PDT, and all required materials should be directed to Ryan Enos at ryan.enos@slac.stanford.edu. The NAICS code for this solicitation is 334111, and the place of performance is SLAC’s facility in Menlo Park, California, 94025.
Electronic Computer Manufacturing

POSTED

5 days ago

DEADLINE

in about 3 hours
View Details
NAICS: 541715
Federal
CAD Design Integration and Metrology Validation ServicesThe contract seeks technical validation services for grating fabrication, focusing on CAD alignment review and post-production metrology to ensure nanoscale accuracy. Work involves the use of advanced metrology tools such as atomic force microscopy, scanning electron microscopy, and profilometry to verify dimensional precision and structural fidelity of fabricated gratings against design specifications. The services are critical for maintaining the high-accuracy standards required in precision optical and nanofabrication applications. This subcontract is issued under NAICS code 541715 and is associated with the Department of Energy through its contractor, SLAC National Accelerator Laboratory. Performance is located in Menlo Park, California, with a 94025 ZIP code. The solicitation was posted on August 3, 2026, and responses are due by August 13, 2026. No set-aside provisions or specific organizational type requirements are specified. Interested parties must submit proposals through the SAM.gov portal before the deadline to be considered for award.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

9 days ago

DEADLINE

in about 3 hours
View Details
NAICS: 325998
Federal
Supply of Single-Crystal CVD Diamond SubstratesThe contract entails the supply of high-purity, single-crystal chemical vapor deposition diamond substrates measuring 10 mm by 10 mm with a thickness of approximately 100 micrometers, specifically engineered for use in nanoscale grating fabrication. These substrates must exhibit exceptionally low defect density and optical flatness to meet the stringent requirements of advanced microfabrication applications, ensuring consistent performance in precision optical and electronic devices. The deliverables are critical to supporting research and development activities requiring material properties that only high-quality diamond can provide. The solicitation, issued by SLAC National Accelerator Laboratory under the U.S. Department of Energy, is classified as a subcontract and was posted on August 3, 2026, with a response deadline of August 13, 2026. The North American Industry Classification System code 325998 is associated with this procurement, indicating it falls under other chemical product and preparation manufacturing. The place of performance is designated as Menlo Park, California, with a zip code of 94025. This effort supports federal scientific infrastructure and requires strict adherence to technical specifications, though no set-aside provisions or point of contact details are specified in the provided data.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

9 days ago

DEADLINE

in about 3 hours
View Details
NAICS: 334510
Federal
Fabrication of Linear Diamond Gratings on CVD Diamond SubstratesThe contract calls for the precision nanofabrication of custom linear diamond gratings on single-crystal chemical vapor deposition diamond substrates, adhering to exacting specifications for pitch, duty cycle, and grating depth as defined by SLAC CAD designs. The work requires advanced nanofabrication capabilities to achieve submicron accuracy and surface quality suitable for high-performance optical or particle beam applications, with all components produced to meet stringent dimensional tolerances and material integrity standards inherent to diamond substrates. The project demands expertise in etching, lithography, and metrology tailored to diamond’s extreme hardness and thermal properties. Performance is required at the Menlo Park location with a 94025 zip code, and the subcontract is issued under NAICS code 334510 for optical instrument and equipment manufacturing. The solicitation was posted on August 3, 2026, with a response deadline of August 13, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The contracting entity is SLAC National Accelerator Laboratory, operating under the Department of Energy, and the work supports specialized research infrastructure requiring materials with exceptional durability and optical stability. No set-aside provisions are specified, and the opportunity is open to any eligible subcontractor capable of meeting the technical demands.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

9 days ago

DEADLINE

in about 3 hours
View Details
NAICS: 333310
Federal
Beam Sharing Grating, Linear Diamonds
Solicitation # 366855(AG)
SLAC National Accelerator Laboratory, operated by Stanford University for the U.S. Department of Energy, is seeking a U.S. domestic source for two custom linear diamond gratings on single crystal CVD diamond substrates, each measuring approximately 10 x 10 mm with a thickness of 100 µm. The first grating has a 980 nm pitch with two distinct duty cycles—30% and 40%—and a guaranteed minimum depth of 3.5 µm, while the second has a 2000 nm pitch with the same duty cycles and a guaranteed minimum depth of 5 µm. Each grating area is approximately 2 mm by 1 mm, with grooves oriented parallel to the 1 mm edge and engraving aligned to SLAC-provided CAD designs. Optional enhanced depth versions are available for both substrates, contingent on fabrication feasibility. Proposals must be submitted using the Lowest Price Technically Acceptable method, with technical compliance assessed against strict specifications and business eligibility determined by SAM.gov registration. The award will be made to the lowest-priced technically acceptable offeror without trade-offs between cost and performance. Payment terms are Net 30 days with FOB Destination Prepaid and Add shipping terms. The subcontract is governed by SLAC’s Fixed Price Commercial Supplies and Services Terms and Conditions (August 2023, supplemented August 2026), incorporating applicable FAR clauses including restrictions on subcontractor sales, whistleblower rights, service contract labor standards, minimum wage requirements under Executive Order 14026, Buy American Act compliance, and patent indemnity. Offerors must properly mark proprietary information and include a technical compliance statement, quoted price, delivery schedule, and certifications with their response to Angela Garcia. Performance is required in Menlo Park, California, and all items must be new, free from defects, counterfeit components, and comply with commercial item definitions under FAR 2.101. Failure to meet any technical requirement disqualifies the proposal regardless of price.
Commercial and Service Industry Machinery Manufacturing

POSTED

9 days ago

DEADLINE

in about 3 hours
View Details