Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Highlands Testbed (HT) Construction

Active

Federal

Response Deadline11/04/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the NASA Shared Services Center involves the construction of a Highlands Testbed structure located at Building 267A of the NASA Ames Research Center. The project requires the delivery of a containment structure measuring approximately 62 by 13 by 1 foot, specifically engineered to support 22 tons of anorthosite regolith simulant for use by prime contractors. The contractor must ensure all work is performed in strict compliance with Fed-OSHA and NASA Ames safety requirements. Classified under NAICS code 238110, the project is managed by the National Aeronautics and Space Administration with a performance location in the 94035 zip code area.

General Info

NASA subcontract for constructing a Highlands Testbed containment structure at Ames Research Center.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

238110 - Poured Concrete Foundation and Structure Contractors

Place of Performance

0, CA, 94035, USA

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC27946814Q.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Relocation of three SSERVI regolith simulant testbeds

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 10:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Builds a new Highlands Testbed (HT) structure for prime contractors on NASA Ames Research Center projects. Constructs a containment structure measuring approximately 62' x 13' x 1' designed to support 22 tons of anorthosite regolith simulant. Ensures compliance with Fed-OSHA and NASA Ames safety requirements. Delivers a completed HT testbed structure at Building 267A.

Similar Contracts

Same NAICS industry code

26_1119 – Robbinsdale-MN

Solicitation # 261119-robbinsdale-mn

Caldwell Tanks, Inc. is seeking subcontractors for a water tank construction project located in Robbinsdale, Minnesota. The solicitation covers several specialized scopes of work, including site work under NAICS 238910, tank painting under NAICS 238320, and electrical work under NAICS 238210. Interested bidders must adhere to specific Disadvantaged Business Enterprise goals, with target participation rates set at 3.5 percent for Minority Business Enterprises and 5.0 percent for Women Business Enterprises. The response deadline for this opportunity is November 17, 2026.

Caldwell Tanks, Inc.

POSTED

about 4 hours ago

DEADLINE

Hickman Reservoir and Pump Station – 26_1109 – Hickman-NE

Solicitation # hickman-reservoir-pump-station-261109-hickman-ne

Caldwell Tanks, Inc. is seeking subcontractors for the construction of the Hickman Reservoir and Pump Station project located in Hickman, Nebraska. This small business set-aside solicitation covers several specialized scopes of work, including site work, tank painting, electrical installations, and fencing, corresponding to NAICS codes 238910, 238320, 238210, and 238990. The solicitation was posted on November 2, 2026, with a very short response window closing on November 5, 2026. Interested parties should coordinate with the primary point of contact, Eric Koetter, to submit their proposals for these specific construction services.

Caldwell Tanks, Inc.

POSTED

about 4 hours ago

DEADLINE

Elbon Tank #2, Schedule 2- Elevated Tank Project

Solicitation # elbon-tank-2-schedule-2-elevated-tank-project

Caldwell Tanks, Inc. is seeking subcontractors for the Elbon Tank #2, Schedule 2 Elevated Tank Project located in Phillip, South Dakota. The project involves several specialized scopes of work, including site work under NAICS 238910, tank painting under NAICS 238320, and electrical work under NAICS 238210. This solicitation is specifically set aside for small businesses, including SAM.gov designated Small Disadvantaged Businesses and Department of Transportation Disadvantaged Business Enterprises. Interested parties must submit their responses by November 13, 2026. Primary coordination for this opportunity is handled by Eric Koetter.

Caldwell Tanks, Inc.

POSTED

about 4 hours ago

DEADLINE

Shotcrete & Spraygrout ApplicationThis subcontract opportunity involves the application of reinforced shotcrete and spraygrout for City of Saint Paul public works projects. The selected provider will work under prime contractors to perform surface preparation and application on sandstone surfaces and tunnel interiors to ensure stabilized walls and ceilings in accordance with project specifications. The project falls under NAICS code 238110 and is associated with the City of Saint Paul in Minnesota. Interested parties must submit their responses by the deadline of December 2, 2026.

City of Saint Paul

POSTED

about 4 hours ago

DEADLINE

Structural Steel ModificationThis subcontract for Structural Steel Modification involves performing structural reinforcement of steel trusses for prime contractors working on fire station projects for the Salt River Pima-Maricopa Indian Community. The primary scope of work requires modifying existing trusses to ensure they can support the weight and load of new HVAC equipment in strict accordance with provided design drawings. The project is categorized under NAICS code 238111 and requires all personnel to complete Cultural Sensitivity Training. The final deliverable is the completion of reinforced steel trusses capable of supporting the specified equipment loads. Interested parties should note the response deadline of December 19, 2026.

Salt River Pima-Maricopa Indian Community

POSTED

about 4 hours ago

DEADLINE

in about 2 months

Specialty Grouting & JointingThis subcontract for Specialty Grouting and Jointing involves the supply and installation of non-shrink grout and expansion or isolation joint materials for municipal lift station projects within the City of Saint Paul. The selected contractor will work under prime contractors to deliver grouted connections and sealed joints, ensuring all work adheres to specific technical standards. Specifically, non-shrink grout must be mixed and placed according to the US Army Corps of Engineers Handbook CRD C621, and preformed expansion joint fillers must be installed in compliance with ASTM D1751 and D1752. The opportunity is categorized under NAICS code 238110 and was posted on November 2, 2026. Interested parties must submit their responses by the deadline of December 2, 2026. This project is focused on critical infrastructure maintenance and construction for the City of Saint Paul in Minnesota.

City of Saint Paul

POSTED

about 4 hours ago

DEADLINE

Concrete Reinforcement & PrecastThis subcontract agreement involves the supply and installation of concrete reinforcement and structural precast units for municipal lift station projects within the City of Saint Paul. The scope of work requires the contractor to install rebar using threaded mechanical splices and place structural precast concrete units in strict accordance with ACI 117 tolerances. The project is categorized under NAICS code 238110 and is managed through the City of Saint Paul. Interested parties must submit their responses by the deadline of December 2, 2026.

City of Saint Paul

POSTED

about 4 hours ago

DEADLINE

Cast-in-Place Concrete & FormworkThis subcontract for Cast-in-Place Concrete and Formwork involves providing specialized construction services for prime contractors on City of Saint Paul municipal lift station projects. The scope of work includes the construction of formwork and shoring in accordance with ACI 347 standards, the installation of embedded items, and the placement of concrete for new light pole bases and valve vaults. All work must adhere to ACI 117 tolerances to ensure the successful delivery of completed concrete structures. The opportunity is categorized under NAICS code 238110 and was posted on November 2, 2026. Interested parties must submit their responses by the deadline of December 2, 2026. This project is situated within the state of Minnesota and is managed through the City of Saint Paul's procurement system.

City of Saint Paul

POSTED

about 4 hours ago

DEADLINE

Concrete Construction ServicesThe Mesa Union School District is seeking a subcontractor to provide comprehensive concrete construction services for facility projects located in Somis, California. The scope of work includes all necessary pouring, forming, and finishing services to deliver completed concrete structures and surfaces while working under prime contractors. Eligible bidders must possess a valid California Class C specialty license and maintain current registration with the Department of Industrial Relations. This subcontract opportunity is categorized under NAICS code 238110, with a response deadline set for November 3, 2027.

MESA UNION SCHOOL DISTRICT

POSTED

about 4 hours ago

DEADLINE

Concrete and Asphalt Supply/InstallationThis subcontract for Concrete and Asphalt Supply/Installation involves performing concrete barrier reconstruction and asphalt dike work for prime contractors on California Department of Transportation projects located in Los Angeles County. The scope of work specifically includes the reconstruction and replacement of Type 50 and Type 60 Concrete Barriers, as well as the installation of Type C or F asphalt dikes utilizing specialized materials and forms. Qualified bidders must hold a Class A General Engineering license to be eligible for this project. The solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026. All deliverables consist of the completed installation of the specified concrete barriers and asphalt dikes within the designated performance area.

California Department of Transportation

POSTED

about 5 hours ago

DEADLINE

Concrete Curbs, Sidewalks, and Retaining WallsThis subcontract opportunity with the City of San Antonio involves the installation of concrete infrastructure for prime contractors working on street rehabilitation projects. The scope of work includes the construction and delivery of concrete curbs, sidewalks, driveways, curb ramps, and combination-type concrete retaining walls, utilizing ready-mix concrete along with reinforcing steel bars and rods. The project falls under NAICS code 238110 and was posted on November 2, 2026. Interested parties must submit their responses by the deadline of December 15, 2026.

CITY OF SAN ANTONIO

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Fence Post Concrete FootingsThis subcontract involves providing specialized excavation and concrete services for prime contractors working on Jefferson Parish Government projects in Louisiana. The scope of work requires the use of an auger to drill holes 12 inches in diameter and 30 inches deep to accommodate 3-inch square aluminum posts. The contractor is responsible for pouring 3000 psi concrete to ensure all fence posts are properly set and stabilized within cured concrete footings. The opportunity is categorized under NAICS code 238110 and was posted on November 2, 2026. Interested parties must submit their responses by the deadline of November 13, 2026, at 5:00 PM.

Jefferson Parish Government

POSTED

about 6 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Precision Composite Saw Preventative Maintenance (Labcut RTR Advanced)This subcontract, managed through the NASA Shared Services Center, involves providing scheduled preventative maintenance for the Labcut RTR Advanced precision composite saw system. The work supports prime contractors on projects at the NASA Langley Research Center in Hampton, Virginia, with the primary goal of minimizing equipment downtime and reducing the risk of system failure. The selected provider must be an authorized Extec equipment service provider to perform the work. Key deliverables for the contract include the successful execution of preventative maintenance cycles and the submission of detailed equipment health certification logs.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Precision Composite Saw Maintenance (Labcut 5000)This subcontract, managed through the NASA Shared Services Center for the National Aeronautics and Space Administration, involves the annual service and maintenance of the Extec Labcut 5000 Series Advanced Precision Composite Plate Saw. The work is performed in Hampton, Virginia, to support prime contractors on NASA Langley Research Center projects. The primary objective is to ensure operational readiness and reliability while mitigating the risk of unplanned breakdowns through general annual servicing. To qualify for this engagement, the provider must be an authorized Extec equipment service provider. The successful contractor is responsible for delivering a fully maintained and operational saw along with detailed service reports. This requirement falls under NAICS code 811210 and was posted on November 2, 2026, with a response deadline of November 5, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Site-Specific Safety and Environmental PlanningThis subcontract, titled Site-Specific Safety and Environmental Planning, involves the development of safety plans and technical submittals for prime contractors operating on projects at the NASA Ames Research Center. The scope of work focuses on creating comprehensive protocols for dust control and spill response, calculating transport load weights, and defining specific packaging and loading methods to prevent the release of materials. The primary objective is to ensure all operations strictly adhere to Fed-OSHA and NASA Ames requirements. The successful contractor is responsible for delivering an approved Site-Specific Safety Plan and all necessary technical submittals to the NASA Shared Services Center.

Environmental Consulting Services

POSTED

about 15 hours ago

DEADLINE

Regolith Simulant Collection, Packaging, and TransportThis subcontract through the NASA Shared Services Center involves the collection, bagging, and transport of regolith simulant materials for prime contractors at the NASA Ames Research Center. The scope of work includes emptying and bagging Deep Testbed simulant as well as packaging LHS-2E and JSC-1A simulants. Operations require the use of industrial bagging equipment and heavy-duty transport vehicles capable of handling loads between 8 and 22 tons, equipped with necessary dust suppression systems. All activities must be performed in strict adherence to Fed-OSHA and SDS guidelines to ensure safety and compliance. The contractor is responsible for the secure transport and final deposition of the bagged simulants at Building 267A. This project falls under NAICS code 484220 and is centered in the 94035 zip code area.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

GibbsCAM Software Maintenance ProviderThis small business set-aside subcontract through the NASA Shared Services Center requires an authorized GibbsCAM support provider to deliver active maintenance subscriptions and technical support for prime contractors. The scope of work focuses on providing prorated software maintenance and the co-terming of all existing agreements to a unified end date of November 7, 2026. Classified under NAICS code 541519, the contract ensures that critical software licenses remain current and supported. Interested parties must meet the specific authorization requirements to provide official GibbsCAM support to maintain operational continuity for the agency's projects.

Other Computer Related Services

POSTED

about 15 hours ago

DEADLINE

GibbsCAM Software License and Upgrade SupplierThis small business set-aside subcontract through the NASA Shared Services Center provides proprietary GibbsCAM software licenses and upgrades for prime contractors supporting the Kennedy Space Center Launch Equipment Shop. The scope of work includes the provision of GO Pro Mill and Turn packages, along with upgrades to Pro Milling and Turning add-ons. To ensure the delivery of authentic OEM licenses for VoluMill and VoluTurn Solids, the supplier must maintain authorized reseller status. The selected vendor is responsible for delivering valid software license keys and submitting completed NASA Entitlement Reporting Forms. This procurement falls under NAICS code 423430 and is specifically designed to support critical launch equipment operations through specialized CAM software capabilities.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

SCADA System Implementation & ConfigurationThe SCADA System Implementation and Configuration subcontract involves the installation, configuration, and integration of Aveva Wonderware software for prime contractors at the NASA Stennis Space Center. The scope of work includes executing software installation, system configuration, industrial tag mapping, HMI development, and comprehensive SCADA environment testing utilizing NASA server infrastructure and industrial control systems. The selected provider must ensure all deliverables adhere to NASA facility security and IT standards to provide a fully operational SCADA system. This project falls under NAICS code 541512 and is managed through the NASA Shared Services Center, with performance taking place in Stennis Space Center, Mississippi.

Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

Aveva Wonderware Software Licensing & SupplyThis subcontract, managed by the NASA Shared Services Center, involves the procurement of Aveva Wonderware software licenses and commercial product entitlements to support prime contractors at the Neil Armstrong Flight Research Facility. The selected provider must be an authorized distributor of Aveva Wonderware products and is responsible for delivering valid software licenses along with the necessary installation media or digital download keys for the current commercial version of the software suite. The project is categorized under NAICS code 513210, with the place of performance located at the Stennis Space Center in Mississippi. Interested parties must adhere to a tight response window, with the solicitation posted on November 2, 2026, and a deadline for responses set for November 5, 2026.

Software Publishers

POSTED

about 15 hours ago

DEADLINE

KSC GibbsCAM Software Licenses

Solicitation # 80NSSC26948351Q

Solicitation 80NSSC26948351Q is a small business set-aside issued by the NASA Shared Services Center for the procurement of GibbsCAM computer-aided manufacturing software licenses and upgrades for the Kennedy Space Center Launch Equipment Shop. The requirement includes three GO Pro Mill and Turn packages, one upgrade from GO Milling to Pro Milling, three upgrades from GO Solids Milling to Pro Milling, and five Upgrade Mill Add-ons to Turning. All licenses include prorated maintenance co-termed through November 7, 2026. The software must support specific lathe specifications, including one turret, up to two spindles, live tooling, and C- and Y-axis capabilities. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis, where offerors must demonstrate technical acceptability by meeting all solicitation requirements. Delivery is specified as FOB Destination to Kennedy Space Center, Florida, with a delivery schedule of 1 to 15 business days after receipt of order. Quotes are due by November 6, 2026, and must be submitted to McKenzie Hanson. This procurement falls under NAICS code 513210 and incorporates various FAR and NASA-specific clauses, including deviations regarding commercial products, sustainable products, and the reporting of entitlement data via the SLAM NASA Entitlement Reporting Form.

Software Publishers

POSTED

about 15 hours ago

DEADLINE

C-B and RF Amplifiers and Switches

Solicitation # 80NSSC946679Q

The NASA Shared Services Center is soliciting quotes for a small business set-aside procurement of C-Band RF Amplifiers and Switches under NAICS 334220. This brand-name or equal requirement specifically seeks four Medium Power Broadband Amplifiers (Pasternack PE15A4042) and six High-Isolation PIN Diode Switches (Pasternack PE71S5003). The contract is a firm-fixed-price award based on the lowest price technically acceptable (LPTA) criteria. All supplies must be delivered FOB Destination to the NASA Glenn Research Center in Cleveland, Ohio, no later than December 18, 2026. Interested vendors must submit quotes to Laura Quave by November 4, 2026, ensuring the Notice ID 80NSSC27946679Q is included in the subject line. Required quote details include the vendor's Cage Code, UEI number, ARO lead time, applicable shipping costs, and any available discounts, with payment terms set at Net 30. The government will not utilize credit cards for payment. Additionally, offerors must be registered in the System for Award Management (SAM) and adhere to specific packaging and marking requirements for duty-free entry, including marking packages as United States Government.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Universal Robotics UR30 Robot Workstation and Console

Solicitation # 80NSSC27945558Q

Solicitation 80NSSC27945558Q is a brand-name requirement issued by the NASA Shared Services Center for the procurement of a Universal Robotics UR30 Robot Workstation and Console. The equipment is intended for use at the Marshall Space Flight Center (MSFC) to ensure interoperability and platform consistency with existing robotic systems. The procurement includes a UR30 robot, Robotiq gripper kits, an Advantech TPC-B520 PC with specific technical configurations, a mobile base kit, and various electrical and pneumatic components. The contract is being competed as full and open under NAICS 333998, with the award based on the lowest price technically acceptable (LPTA) offer. Key deliverables include the delivery of hardware FOB Destination within 90 days after receipt of order, which must include 20 hours of workstation assembly completed prior to shipment. Additionally, the contractor must provide five consecutive 8-hour days of on-site applications engineering at MSFC Building 4475, to be scheduled within 30 days of delivery. Final acceptance is contingent upon the completion of this on-site engineering. Vendors must be registered in SAM, provide proof of manufacturer pricing, and confirm authorization to resell the specified items. Payments will be made via the Invoice Processing Platform (IPP) on Net 30 terms, and credit card payments will not be accepted.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 19 hours

EXperTEC 1 YEAR ANNUAL SERVICE CONTRACT F/LABCUT 5000 50484

Solicitation # 80NSSC27948601

The NASA Shared Services Center is seeking a one-year annual service contract for the maintenance of an Extec Labcut 5000 Series Advanced Precision Composite Plate Saw, located at the Langley Research Center in Hampton, Virginia. This procurement is designated as a sole source requirement under FAR 12.102(a), as Excel Technologies, Inc. has been identified as the exclusive provider of compatible and authorized maintenance services for this specific equipment. The primary objective of the contract is to ensure operational readiness, sustain equipment performance, and minimize unplanned breakdowns that could impact mission-critical manufacturing operations. The scope of work includes two primary line items: a one-year annual service contract for the Labcut 5000 and a one-year annual preventative maintenance contract for the Labcut RTR Advanced. The period of performance is estimated as one year after receipt of order. This acquisition follows FAR Part 12 for commercial items and services and includes the NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman. Procurement is managed by Shanna Patterson and Morgan Mitchell, with a response deadline for capability statements set for November 5, 2026. The applicable NAICS code for this effort is 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS