Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

HMEE IV FOLLOW-ON EFFORT

Active
PANDTA-26-P-0000031111Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Army is pursuing acquisition information for the High Mobility Engineer Excavator Type IV, a diesel-powered, all-wheel drive vehicle designed for tactical mobility across rough terrain and high-speed road travel, capable of performing excavation, material handling, and construction tasks. The vehicle is equipped with a front loader, rear-mounted backhoe, portable tools, and optional Army radio provisions, and complies with federal highway safety and Non-Road Engine emissions standards under Title 40 CFR Section 89.908(a)1. It is designed to be transportable via rail, marine, highway, and air, and classified as a self-propelled construction vehicle meeting all regulatory requirements. The Army seeks to identify qualified Original Equipment Manufacturers or other sources capable of delivering this system along with ancillary equipment and support services. The Army plans to acquire approximately 360 units over five to ten one-year contract periods, with Firm Fixed Price pricing established for each period, though quantities and duration are non-binding and subject to change. This Sources Sought action, titled HMEE IV FOLLOW-ON EFFORT and identified by solicitation number PANDTA-26-P-0000031111, is issued by the Department of Defense through the Office of W6QK Acc- Dta in Warren, Michigan. Responses are due by September 3, 2026, and all submitted information will be treated as proprietary and used exclusively by the U.S. Army for market analysis and planning purposes, with no sharing among potential competitors. Participation carries minimal commercial risk, and interested parties are directed to Section IV of the document for guidance on handling confidential data.

General Info

Army seeks qualified manufacturers to supply up to 360 HMEE IV excavators over 5–10 years for tactical engineering missions.

Agency

Department Of Defense → W6QK Acc- DtaView Agency

NAICS

336999 - All Other Transportation Equipment ManufacturingView NAICS

Place of Performance

73310, MI, USA

Set-Aside

NONE

Documents

(2)

ATPD-2301A Draft Automotive Tank Purchase Description for High Mobility Engineer Excavator

PDFpurchase-description

Sources Sought for High-Mobility Engineer Excavator (HMEE) Type IV

PDFsources-sought

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc- Dta
Contacts1 person available
OfficeWARREN, MI, 48397-5000, USA
Organization / Agency
Department Of Defense → W6QK Acc- Dta
View Agency Profile
Office AddressWARREN, MI, 48397-5000, USA
Contacts
Matthew Moreton

Full Description

Show more

The U.S. Army is seeking information to assess the availability of sources to meet the Government’s requirement for the High Mobility Engineer Excavator (HMEE). The HMEE Type IV capability, outlined within AUTOMOTIVE TANK PURCHASE DESCRIPTION-2301A, is a pneumatic tired, diesel-engine driven, all-wheel drive tractor with attachments, for excavation of small emplacements, material handling, and general construction tasks; with tactical mobility over rough terrain and high mobility on roadways. The basic tractor, is classified as a self-propelled construction vehicle, meeting federal highway safety standards as well as emission standards for Non-Road Engines. Emissions standards follow exemption Title 40 of the Code of Federal Regulations (CFR), Section 89.908(a)1. The Type I tractor is equipped with a front loader attachment; a rear mounted backhoe; portable tools; and when specified, provisions for an Army radio set. The HMEE Type IV is conveyable by rail, marine, highway and air modes of transportation. 



The objective of this Sources Sought Questionnaire is to better understand the availability and capabilities of Original Equipment Manufacturers (OEMs) or other sources for vehicle systems meeting the HMEE requirements, ancillary equipment, and system services. The Army plans on procuring an estimated 360 HMEEs over a minimum of five, and a maximum of 10, one-year periods and plans to establish Firm Fixed Price (FFP) pricing for each period. The quantities identified and length of contract are not binding and are subject to change. The information gathered by the Army through this questionnaire, along with other market investigation data, is solely intended for use by the U.S. Army and will not be shared amongst competing companies. For instructions and more information regarding proprietary information, please refer to Section IV of this document. Participation in this Sources Sought Questionnaire by the various contractors is considered low risk to the commercial companies, as responses will be treated per Section IV as proprietary.

Similar Contracts

Same NAICS industry code

NAICS: 336999
New
Federal
Club Car Golf Cart
Solicitation # W911S226U3871
The contract pertains to the procurement of Club Car Onward 6-passenger lifted gas golf carts with specific technical specifications including a 429cc overhead valve engine delivering 14.0 HP at 3600 RPM, a 6.0-gallon fuel capacity, and a 6-inch lifted aluminum box beam frame. The vehicles are to be finished in Metallic Tuxedo Black or a similar black color with black or gray upholstery, featuring a deluxe rear seat grab bar, middle-row cupholders, rear flip seat, under-seat storage tray, independent wide-track double A-arm suspension with hydraulic shocks, and self-adjusting four-wheel mechanical drum brakes. The carts include a large black canopy with valance, 14-inch DOT-rated all-terrain tires, LED lighting throughout including front headlights and rear tail/brake lights, steering wheel-mounted turn signal controls, a fuel meter, horn, and seat belts for all passengers. Additional features encompass wide fender flares, a brush guard, adjustable side mirrors, and a premium tinted folding windshield. This procurement is governed under solicitation number W911S226U3871, issued by the Department of Defense through the office at Fort Drum, New York, with a posting date of August 3, 2026, and a response deadline of August 10, 2026. The requirement is designated as a Small Business Set Aside under NAICS code 336999, indicating the contract is reserved exclusively for small businesses. The primary point of contact for inquiries is Carmine Cocchia, reachable via phone or email provided in the contract data. The items must be delivered to a location with a ZIP code of 13602, consistent with Fort Drum’s installation address.
W6QM Micc-Ft Drum

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 336999
New
DIBBS
SEAT, MARINE
Solicitation # SPE7M4-26-T-296Q
This contract pertains to the procurement of a marine seat identified by NSN 2090-20-008-1750 and part number SWP-1055-LM, with a single unit requirement to be delivered within 20 days under solicitation SPE7M4-26-T-296Q. The item is designated as a restricted source requiring engineering approval from the government design control activity, and strict compliance with DLA packaging standards under MIL-STD-2073-1E and MIL-STD-129 is mandated, including specific packaging methods, materials, and labeling. Mercury and mercury-containing compounds are explicitly prohibited from direct contact with the supply except for approved functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemically specified reagents by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Delivery is to be made FOB origin to Assault Craft Unit 4 in Virginia Beach, Virginia, with shipment via traceable transportation only—parcel post is strictly prohibited. The required delivery date is July 29, 2026, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The item must be shipped with full documentation and marked according to DLA guidelines, with no special marking required beyond standard compliance.
FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336999
New
Federal
HQ AETC - Golf Carts
Solicitation # F3PF1K6202AC01
This notice is a sources sought announcement issued by the Department of Defense through the 502 Cons Cl office at JBSA Lackland, Texas, seeking input from small businesses regarding the potential procurement of four golf carts to support HQ AETC operations. The notice explicitly states it is for planning purposes only and does not constitute a solicitation, nor does it guarantee that a contract will be awarded. Responses are requested to help the government assess market interest, identify qualified small business sources, and determine the feasibility of a small business set-aside for this procurement. Respondents are informed that no compensation will be provided for time, effort, or costs incurred in submitting information, and all submissions become the property of the government without return. The North American Industry Classification System code associated with this effort is 336999, and the place of performance is listed as Texas with a zip code of 78150. The primary point of contact for questions is Brenna Freel, reachable by phone at 210-652-9944 or email at brenna.freel@us.af.mil, with Mercedes Perez serving as the secondary contact. The notice was posted on July 31, 2026, and responses must be submitted by 4:00 PM Eastern Time on August 6, 2026. This is not an invitation to bid or quote; it is solely a market research tool aimed at informing future contracting decisions.
FA3016 502 Cons Cl

POSTED

5 days ago

DEADLINE

in about 21 hours
View Details

More opportunities from Department Of Defense → W6QK Acc- Dta

Same awarding agency

NAICS: 335999
New
Federal
BOAST RFOP - Cable Assembly, Spec - NSN: 6150-01-578-0469
Solicitation # PANDTA-24-P-0000_010274
The U.S. Army Contracting Command - Detroit Arsenal is issuing a Request for Order Proposal under the Basic Ordering Agreement Sustainment Track program for a Firm-Fixed-Price order of 81 units of Cable Assembly, Specification, NSN 6150-01-578-0469, part number 12992565, increasing the original quantity from 20 to 81 units. The offer due date has been extended from July 13, 2026, to July 30, 2026, and all other terms remain unchanged. Only vendors with a fully executed BOAST Basic Ordering Agreement in place by the closing deadline are eligible for award, and the Government will make award on a Lowest-Priced, Technically Acceptable basis. Proposals must be submitted in two volumes—Technical and Price—with the technical volume including a clear statement of compliance with the Technical Data Package and specifications, and the price volume containing a completed and signed RFOP price schedule. Proposals must also include a completed Technical Information Questionnaire with substantiating documentation and be emailed with a specific subject line format by the deadline. The item is export-controlled, requiring vendors to be certified in the Joint Certification Program to access the associated Technical Data Package, and non-JCP certified vendors must submit DD Form 2345 to receive access. The contractor must comply with MIL-STD-2073-1 and the Special Packaging Instruction SPI 12992565 for preservation, packing, and marking, including Level B packing, one unit per package, and marking to MIL-STD-129 with barcoding and MSL labels. First Article Test units must be delivered within 390 calendar days after contract award, followed by production units within 360 days after formal FAT approval; inspections occur at origin, while FAT acceptance occurs at destination. The contractor must adhere to stringent quality standards, including conducting first article testing per the TDP, QAPs, and drawings, and submitting all required CDRLs including Engineering Change Proposals, Requests for Variations, and Notices of Revision. Compliance with U.S. Buy American provisions, NIST SP 800-171 for Controlled Unclassified Information, OPSEC requirements including annual training and appointment of a Level I coordinator, and prohibitions on foreign-made equipment or Russian-sourced energy are mandatory. Payment will be processed via electronic funds transfer through
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 26 days
View Details
NAICS: 332311
New
Federal
Lightweight Multipurpose Shelter
Solicitation # W912CH26B0010
This five-year requirements contract solicits the design and fabrication of Lightweight Multi-Purpose Shelters (LMS) Type I and Type III, specifically engineered for transport on the M1152A1 and M1152A1 with B2 Armor Kit HMMWVs, and capable of being moved via rail, air, marine, and highway both mounted and dismounted. The shelters are rigid-wall, EMI-shielded tactical units intended to house battlefield electrical systems, with each unit requiring a Shelter to HMMWV Mounting Kit and a Pintle Extension Kit, both stored internally and separately boxed. Production units must also include an over-packed Technical Manual. The contractor is fully responsible for procuring and mounting the HMMWVs for First Article Testing since these vehicles are not provided as Government Furnished Equipment. The contract follows a Firm-Fixed-Price structure and is awarded under the Lowest Price Technically Acceptable (LPTA) methodology, meaning the award will go exclusively to the responsible bidder with the lowest evaluated price, with no trade-offs permitted between cost and technical factors. All technical and packaging requirements are stringent, governed by military standards including MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for marking, and MIL-STD-130 for Unique Item Identification using 2D Data Matrix symbology encoded with format indicators 05, 06, or 12. Packaging must include Logistic Product Data and Special Packaging Instructions validated through ASTM D4169 Distribution Cycle 18, and all shipments require heat-treated wood packaging compliant with ISPM-15. Inspection and acceptance occur at origin for hardware and destination for technical data, with First Article Testing governed by MIL-HDBK-831A and DI-MISC-82386, and production testing by DI-NDTI-80809B. Deliveries are structured across CLINs, with First Article Testing to be completed within 330 days of award and production deliveries required within 210 days of each delivery order, with no orders placed until FAT is approved. All technical data, including Interface Control Drawings, Test Plans, and Safety Assessments, must be developed by the contractor without Government-provided TDP, and submissions must adhere to strict electronic formats through DoD SAFE, with invoicing mandated via WAWF. The contract requires compliance with multiple DFARS and FAR clauses covering anti-k
Prefabricated Metal Building and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332994
New
Federal
Solicitation: Pintle Mount Assembly (NSN: 1005-01-461-2656) - Amended
Solicitation # W912CH-26-B-A003
This procurement is for a five-year Firm-Fixed-Price Indefinite-Delivery Indefinite-Quantity contract to supply the Pintle Mount Assembly (NSN: 1005-01-461-2656, Part Number: 12986102) under a sole-source 8(a) competition, with a five-year minimum obligation of 144 units and a maximum potential volume of 3,600 units across five ordering years, each estimated at 576 units. The contract is administered by the Army Contracting Command - Detroit Arsenal and will be performed at Anniston Army Depot, Alabama, with all deliveries FOB destination and transportation costs borne by the contractor. Bidders must possess prior access to the Technical Data Package (TDP), designated as Distribution Statement D, which contains critical specifications and is accessible only to Department of War and authorized U.S. DoD contractors via SAM.gov; failure to obtain TDP access will result in bid rejection. All bids must be submitted electronically by 1:00 p.m. local time on July 27, 2026, via email under 10 megabytes, and must include completed fill-ins across Sections B, E, F, and K, including unit pricing for CLINs 0011 through 0016, with CLIN 0016 requiring a dollar amount even if requesting a first article waiver. The government will award to the lowest-priced responsive and responsible bidder without negotiation, evaluating solely on offered unit prices for the line items. The contract imposes stringent technical, compliance, and administrative requirements. All items must comply with MIL-STD-2073-1 and MIL-STD-129 for packaging and marking, including Unique Item Identification (UID) per MIL-STD-130, with machine-readable verification required. Wood packaging must meet ISPM 15 and DOD 4140.65-M standards. Contractors must adhere to Controlled Unclassified Information (CUI) protocols, complete mandatory DoD CUI training, enforce CUI Non-Disclosure Agreements, and safeguard CUI in locked facilities. Cybersecurity obligations include compliance with DFARS 252.204-7019 and NIST SP 800-171 requirements, and all personnel with security clearances must undergo annual TARP training. Inspection and acceptance occur at origin
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 333413
New
Federal
BOAST RFOP - Centrifugal Fan - NSN: 4140-00-895-3417
Solicitation # PANDTA_26_P_0000_032254
The U.S. Army Contracting Command – Detroit Arsenal is conducting market research through a Sources Sought Notice to assess industry capabilities for the potential future procurement of 220 centrifugal fans with NSN 4140-00-895-3417, with an additional 220 units available under a 100% option quantity. This effort is classified as a Total Small Business Set-Aside under FAR 19.5, requiring all responding vendors to certify their small business status through SAM.gov and comply with the SBA’s nonmanufacturer rule, which mandates that small businesses either manufacture the product themselves, supply a product made by another small business, or hold an SBA waiver. The procurement is intended to be conducted through the BOAST Program, and contractors not currently approved under BOAST are directed to reference W912CH-26-R-0001 on SAM.gov. Responses must include a comprehensive vendor profile with company name, mailing address, CAGE code, point of contact details, and website, and must be submitted via email to the designated contracting specialist no later than June 29, 2026, at 1:30 PM EST. Information requested includes production lead time, sustainable monthly production rates, proposed production location, and commercial availability of the item. All proprietary information must be clearly marked with “PROPRIETARY INFORMATION CONTAINED WITHIN” on the cover and restricted legends such as “CONFIDENTIAL,” “CONFIDENTIAL DATA BEGINS,” and “CONFIDENTIAL PORTION ENDS” for electronic files, with a release statement permitting distribution to Army personnel. Participation is strictly voluntary, and the government retains no obligation to proceed with a solicitation or contract award based on responses. The place of performance is Warren, Michigan, and the NAICS code applicable to this effort is 333413 for industrial and commercial fan and blower manufacturing. Submission formats must be in .doc, .docx, or .pdf, and responses must be sent with the exact subject line specified.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 334515
New
Federal
W912CH-26-B-A002: TESTING KIT, AVIATION PETROLEUM (NSN 6630-01-558-5109)
Solicitation # W912CH26BA002_TESTINGKITAVIATIONPETROLEUM
The U.S. Army Contracting Command-Detroit Arsenal is seeking bids for a five-year, firm-fixed-price, indefinite-delivery indefinite-quantity contract to procure Testing Kits, Aviation Petroleum (NSN 6630-01-558-5109, PN: 57K6311), with a guaranteed minimum order of 15 units at contract award and a maximum cumulative order of 516 units over the five-year period. This procurement is conducted as a full and open small business set-aside under NAICS code 334515, with a size standard of 750 employees, and all bids must be submitted electronically through the PIEE portal by 11:30 a.m. local time on September 14, 2026. The contract will be awarded based solely on the lowest total price, evaluated without negotiations, requiring bidders to submit their best terms upfront. Bidders must access and comply with the Technical Data Package (TDP), which carries a Distribution Code “A” restrictively limited to Department of War and U.S. DoD contractors, and failure to do so will result in bid rejection. All bids must include complete and accurate fill-ins across standard forms and representations, including certifications related to independent pricing, business responsibility, arms control compliance, place of manufacture, Buy American, and cybersecurity obligations, with omission of any required element leading to disqualification. The technical requirements mandate adherence to MIL-STD-2073-1E for military preservation and packing, with Level B packing and a maximum unit pack weight of 42.0 pounds, and MIL-STD-129 for marking, including Unique Item Identification (UII) using two-dimensional data matrix symbology compliant with ISO/IEC 16022. All packaging must comply with ISPM 15 for wood materials, requiring heat treatment at 56°C for 30 minutes and proper marking. The product must meet ISO 9001:2015 or equivalent quality standards, and inspection and acceptance of supplies must occur at the contractor’s facility. Deliveries are to be FOB destination to two locations—50% to Plant 7001 (BR4) and 50% to Plant 7011 (AQ5)—with each annual ordering period requiring delivery within 180 days of its start, and a minimum of 15 units and
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336360
New
Federal
BOAST RFOP - FRAME, SEAT, VEHICULAR / NSN: 2540-01-414-7899
Solicitation # PANDTA-25-P-0000_026840
The U.S. Army Contracting Command – Detroit Arsenal is soliciting proposals under the Basic Ordering Agreement Sustainment Track (BOAST) program for a Firm-Fixed-Price order of 26 vehicular seat frames, identified by NSN 2540-01-414-7899 and part number 12933517, with an unexercised option for an additional 26 units. This is a total small business set-aside, and only vendors with a fully executed BOAST Basic Ordering Agreement in place by the closing date of August 24, 2026, at 1600 EST are eligible for award. The procurement is subject to strict export control requirements, necessitating that offerors hold a current DD Form 2345 certification under the Joint Certification Program to access the technical data package, which resides in SAM.gov. Proposals must be submitted electronically via email or through the Procurement Integrated Enterprise Environment, with a completed and signed pricing sheet only—no separate technical proposal is required. Evaluation will be based solely on price, with award going to the lowest-priced responsible offeror meeting all material requirements, including compliance with FAR 9.104 responsibility criteria and the BOAST BOA eligibility gate. The item must conform to CARC coating specifications per MIL-DTL-53072 and meet ISO 9001:2015 quality standards. First article testing requires two units to be produced and tested per contract requirements, with the test report accepted at the destination. Packaging and marking must follow MIL-STD-2073-1 and MIL-STD-129, with special attention to the SPI 12933517 Revision C, and all wood packaging must comply with ISPM 15 and bear an ALSC-approved mark. Delivery of production units is scheduled within 225 calendar days after written FAT approval, with the first article test units due within 90 calendar days of order placement, and shipment is FOB destination to DLA Distribution Red River in Texarkana, TX. The contractor must also comply with NIST SP 800-171 cybersecurity requirements, complete Counterintelligence Awareness and Anti-Terrorism Level I training, and ensure all data is destroyed upon contract completion. All submitted offers must cover the full quantity, and late or incomplete proposals will be rejected.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 332994
New
Federal
M24, Right Assembly
Solicitation # W912CH-26-R-0023
The Army Contracting Command – Detroit Arsenal is preparing to issue a full and open competition solicitation for a one-time buy of the M24 Right Assembly, identified by NSN 2840-01-615-5146 and part number 13036424, under NAICS code 332994. This procurement is structured as a firm-fixed-price contract with no options beyond the initial purchase, and the item is subject to export control regulations. All interested vendors must be registered in the System of Award Management and meet the responsibility criteria outlined in FAR 9.104. Access to the Export Controlled Technical Data Packages required for this contract is restricted to vendors certified in the Joint Certification Program; those not yet certified or with expired certification must submit DD Form 2345 to the U.S./Canada Joint Certification Office. The solicitation will be issued electronically, and bidders are solely responsible for monitoring the official government portal for any amendments or updates, as the government will not maintain a bidder mailing list. Failure to obtain and respond to amendments before the deadline will result in nonresponsiveness and rejection of submissions. The response deadline for the anticipated solicitation is June 5, 2026, at 5:00 p.m., with primary point of contact Brandy Sanford and secondary contact Elizabeth Levine Welhouse available for inquiries.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details