Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

HOLDER, KEY

Active
SPE7L1-27-T-3144Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L1-27-T-3144 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 50 units of Key Holders, identified by NSN 5340015033122 and reference part number McMaster-Carr 12625A25. The requirement follows TDP Rev A Gen 1 and has no shelf life restrictions. Delivery is required within 20 days after the order, with an original required delivery date of October 28, 2026. The items are to be delivered FOB Destination to NAVFAC Far East, PWD Yokosuka, with shipping addresses provided for both parcel post in the US and freight in Japan. The contract mandates strict adherence to DLA packaging requirements (RP001) and marking standards per MIL-STD-129. Non-hazardous materials must be commercially packaged according to ASTM D3951, while hazardous materials must follow TQ requirement IP025. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include electronic invoicing through the Wide Area WorkFlow (WAWF) system and compliance with the Buy American Act and Berry Amendment. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by November 12, 2026.

General Info

DLA request for quotes for 50 key holders delivered to Yokosuka, Japan.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

PSC 473 BOX 13, FPO, AP, 96349-2903, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Office AddressUSA
Contacts
MICHAEL NORDAHL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOLDER,KEY
HOLDER,KEY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
MCMASTER-CARR SUPPLY CO 39428 P/N 12625A25
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018940817 0001 EA 50.000
NSN/MATERIAL:5340015033122
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7L1-27-T-3144
SECTION B
PR: 7018940817 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N62836
NAVFAC FAR EAST
PWD YOKOSUKA
PSC 473 BOX 13
FPO AP 96349-2903
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N62836
NAVFAC FAR EAST, PWD YOKOSUKA
BLDG 4328 RECEIVING
TOMARI CHO YOKOSUKA SHI
KANAGAWA 238-0001
JP
M/F: (TCN) N6107662950007
RDD: 325
PROJ: MJ4 TP 3
SUPP ADD: N62836 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 14
DIC: A41 DIST: 9B ADV: 2B FC: E1
Need Ship Date:00/00/0000 Original Required Delivery Date:10/28/2026
SPE7L1-27-T-3144 NSN/Part Number: 5340-01-503-3122 Quantity: 50 EA Purchase Request: 7018940817QTY: 50 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
SLED
One (1) Year Contract - Nuts and Bolts
Solicitation # 348
The Jefferson Parish Government is soliciting bids for a one-year, as-needed contract to supply various nuts and bolts for the Eastbank Warehouse Department. The scope of work includes the procurement of domestic hex head bolts, T-head bolts, and hex nuts in multiple sizes and grades, including Grade 5, A325, and A449. A critical technical requirement for most items is a baked-on blue Teflon coating that meets the ASTM B117 testing standard for corrosion resistance. Additionally, T-head bolts must comply with ANSI/AWWA C111/A21.11-00 standards, and certain nuts must meet ASTM A194 specifications. Bidders must adhere to strict insurance requirements, including mandatory coverage for Worker's Compensation, Commercial General Liability, and Business Automobile Liability in accordance with Jefferson Parish Resolutions. The apparent low bidder is required to submit compliant insurance certificates within ten calendar days of the bid opening to avoid rejection. The Parish reserves the right to award the contract to the next lowest responsive and responsible bidder if these insurance obligations are not met. Responses to solicitation number 348 are due by November 10, 2026.
Jefferson Parish Government

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
Supply of Hexagon Cap Screws (NSN 5305-01-731-2843)This subcontract involves the supply of Hexagon Cap Screws, specifically NSN 5305-01-731-2843, to support prime contractors for DLA Aviation supply contracts. The items must be sourced according to the DLA Master List of Technical and Quality Requirements, with a strict prohibition on the use of additive manufacturing. All deliverables must be shipped to the Electric Boat Corporation in North Stonington, Connecticut, with packaging and quality control adhering to MIL-STD-129, MIL-STD-2073-1E, and either MIL-STD-1916 or ASQ H1331 standards. To be eligible for this contract, providers must maintain JCP certification and ensure full compliance with ITAR, EAR, and NIST SP 800-171 regulations. The procurement is managed by the Department of Defense under the ASC Commodities Division and falls under NAICS code 332722. Interested parties must meet the response deadline of November 4, 2026.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
Specialized Fasteners and Hardware SupplyThis subcontract involves the procurement of nuts, bolts, screws, and specialized fasteners to support prime contractors delivering installation kits for the DLA Weapons Support Land Supply Chain. All provided hardware must strictly adhere to the grade and material standards specified in the TDP Rev B Gen 2 reference drawings. Due to the critical nature of the components, the supplier is required to maintain quality certification for aerospace and defense grade fasteners to ensure all deliveries are fully certified. Managed by the Department of Defense under NAICS code 332722, the contract was posted on October 30, 2026, with a response deadline of December 1, 2026. Performance for this requirement is centered in the 17070-5002 zip code area. Interested parties can find further details through the DLA Weapons Support Land Supply Chain procurement portal.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturer of Specialized Machine Screws (NSN 5305-01-532-7643)This subcontract opportunity with the Department of Defense ASC Commodities Division involves the precision manufacture of machine screws under NSN 5305-01-532-7643. The selected provider must produce ten screws per unit in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. Deliverables include the physical hardware and a formal Certificate of Quality Compliance, with performance based in New Cumberland. To be eligible, manufacturers must hold SAE AS9003 or ISO 9001 certification and maintain US/Canada JCP certification. Additionally, the contract mandates strict cybersecurity adherence through CMMC Level 2 and NIST SP 800-171 compliance. Interested parties must submit their responses by November 4, 2026.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EYE
Solicitation # SPE4A6-27-T-5815
Solicitation SPE4A6-27-T-5815 is a Request for Quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of four eye bolts (NSN 5306-00-159-5362). Designated as critical application items, the bolts must be manufactured according to basic drawing NR 80064 2584025 Revision J and reference drawing NR OMLM6 2584542 Revision AA. The required delivery date is August 18, 2027, with a need ship date of April 20, 2027, for delivery to DLA Distribution Albany in Georgia. This is not a small business set-aside, though a price evaluation preference is available for SBA-certified HUBZone concerns. The contract mandates strict quality and security compliance, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Technical data is subject to ITAR or EAR export controls, and contractors must meet CMMC Level 2 and DFARS 252.204-7012 cybersecurity standards for safeguarding covered defense information. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Additionally, the government will not evaluate or award offers involving items produced via additive manufacturing. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-27-T-6305
Solicitation SPE4A6-27-T-6305 is a fixed-price request for quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of 22 self-locking hexagon nuts. The required items are identified by NSN 5310-00-894-4990, with Meggitt Aircraft Braking Systems Corp part number GYN165, for which SPS Technologies is listed as an acceptable source. The procurement falls under NAICS code 332722 and is not a small business set-aside, though a HUBZone price evaluation preference may be applied. Delivery is required within five days after receipt of order to the W6TF Aviation Flight Company at Fort Bragg, North Carolina. The contract mandates strict adherence to DLA packaging requirements RP001 and marking standard MIL-STD-129, with additional hazard labeling required per 29 CFR 1910.1200 for any hazardous materials. Quality assurance involves destination inspection under FAR 52.246-2, utilizing zero-based sampling plans such as MIL-STD-1916 or ASO H1331. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the successful contractor must utilize the Wide Area Workflow (WAWF) system for invoicing and payment. Key regulatory compliance includes the Buy American Act, Berry Amendment, and various DFARS cybersecurity and telecommunications restrictions.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-27-T-6249
Solicitation SPE4A6-27-T-6249 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of self-locking plate nuts (NSN 5310015971830). The requirement is divided into three delivery locations: DLA Distribution Barstow, DLA Distribution Albany, and DLA Distribution New Cumberland, with a total combined quantity of 1,503 units. Delivery is specified as FOB Origin under the First Destination Transportation program, with a general delivery lead time of 220 days and required delivery dates extending through October and November 2027. The items are classified as critical application commercial hardware and must be manufactured in accordance with the current revision of the applicable part standards, specifically referencing MIL-DTL-45913/1B(3) and MIL-DTL-45913E. Quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with palletization following DLA requirement RP001. This procurement is not a small business set-aside, although a price evaluation preference is available for HUBZone Small Business Concerns. Offerors must comply with the Buy American Act and Berry Amendment restrictions and represent that they will not provide covered telecommunications equipment. All quotes must be submitted electronically via the DIBBS portal, and successful contractors will be required to use the Wide Area WorkFlow system for invoicing and payment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-27-T-6088
Solicitation SPE4A6-27-T-6088 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 48 socket head cap screws, identified by NSN 5305-01-597-3671. This is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. The procurement is managed under the First Destination Transportation program, with a need ship date of April 20, 2027, and an original required delivery date of July 27, 2027. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and safety standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Mercury or mercury compounds are strictly prohibited in all packaging and preservation. Due to the nature of the technical data, this procurement is subject to ITAR and EAR export controls per DFARS 252.225-7048, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, offerors must comply with the Buy American Act and Berry Amendment restrictions, and provide disclosure for any non-domestic materials used. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the DIBBS system for quote submission. Inspection and acceptance will occur at the destination based on zero-non-conformance sampling plans. The solicitation also incorporates cybersecurity requirements, including DFARS 252.204-7012 and CMMC Level 2 standards, and prohibits the use of covered telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-27-T-6430
Solicitation SPE4A6-27-T-6430 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of close tolerance screws, identified as NSN 5305008284612 and part number NAS1152E4. This is a critical application commercial item. The requirement is for 86 packages, with each package consisting of 50 pieces. Delivery is required by March 21, 2027, with a need ship date of April 6, 2027, shipped FOB Origin to DLA Distribution Warner Robins in Georgia. The contractor must adhere to strict quality and technical standards, including TDP Rev A Gen 1 and the current revision of the applicable part standard. Key requirements include a mandatory Certificate of Quality Compliance (Mill-Material Certification) with every shipment and dimensional conformance inspection for Class 3A and 3B threads per System 22 of FED-STD-H28/20. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with zero non-conformances required for acceptance. Packaging and marking must comply with MIL-STD-129, MIL-STD-130N, and ASTM D3951, with DLA Master List requirements taking precedence. This solicitation is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small businesses. Offerors must comply with the Buy American Act, the Berry Amendment, and various cybersecurity regulations, including DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the use of additive manufacturing is prohibited unless specifically authorized. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-27-T-6071
Solicitation SPE4A6-27-T-6071, issued by the DLA Weapons Support ASC Commodities Division on October 23, 2026, is a request for quotations for nine hexagon head cap screws, part number MS90725-113 (NSN 5305013258388). The items must be manufactured in accordance with NASM90725 Revision 04 and delivered to DLA Distribution Albany, Georgia. The required delivery date is June 22, 2027, with a need ship date of April 20, 2027. This is not a small business set-aside procurement and falls under NAICS code 332722. The contract mandates strict quality and environmental standards, including a total prohibition of mercury or mercury compounds in the hardware, preservation, and packaging. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Shipping is designated as FOB Origin. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and the Buy American Act.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEY
Solicitation # SPE4A6-27-T-5979
Solicitation SPE4A6-27-T-5979 is a Request for Quotations issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of 16 key washers, identified by NSN 5310-01-066-3928. These items are designated as critical application items and must be manufactured according to specific technical drawings, including Basic Drawing 19207 12274522 Revision F. The delivery is required within 264 days after order, with a need ship date of July 22, 2027, and delivery to DLA Distribution San Joaquin in Tracy, California. This is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. The contract mandates strict adherence to quality and technical standards, incorporating the DLA Master List of Technical and Quality Requirements and requiring sampling per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the Berry Amendment. Inspection and acceptance will occur at the destination per FAR 52.246-2.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-27-T-6265
Solicitation SPE4A6-27-T-6265, issued by the DLA Weapons Support ASC Commodities Division, is a fixed-price request for quotations for 261,000 machine screws, part number NAS1218-06E5 (NSN 5305011303257). This item is designated as a critical application item and must be manufactured in accordance with the current revision of the NAS1218 non-government standard. The procurement is not a small business set-aside, though a price evaluation preference is available for certified HUBZone Small Business Concerns. Offers involving additive manufacturing are prohibited. The contract mandates strict quality and inspection standards, requiring manufacturer compliance with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must adhere to ASTM D3951 and RP001, with labeling following MIL-STD-129 and MIL-STD-130N. Delivery is required within 206 days, with a need ship date of May 25, 2027, and a final delivery destination of DLA Distribution Jacksonville, Florida. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

NAICS: 488410
New
DIBBS
Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized packaging and marking services for the Department of Defense under the DLA Weapons Support Land Supply Chain. The scope of work requires the contractor to package seven torsion springs in strict accordance with MIL-STD-2073-1E standards, specifically utilizing QUP:001, PRES MTHD:10, and CLNG/DRY:1. Additionally, the contractor must apply all necessary marking and labeling per MIL-STD-129 using industrial marking equipment and military-specification preservatives. The project is categorized under NAICS code 488410 and will be performed in Greensboro, North Carolina. Interested parties must note the response deadline of November 13, 2026, for this specific requirement to deliver fully processed shipments for prime contractors.
Motor Vehicle Towing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Helical Torsion Spring FabricationThis subcontract involves the fabrication of seven helical torsion springs for the DLA Weapons Support Land Supply Chain. The manufacturer is required to produce the units according to Basic Drawing NR 53711 7066804 Revision A using precision winding and coiling machinery to meet the specifications of NSN 5360-01-486-1982. Performance will take place in Greensboro, North Carolina, under NAICS code 332613. Strict quality and regulatory standards are mandated for this project, including zero non-conformances per MIL-STD-1916 or ASQ Z1.4. The contractor must maintain US/Canada Joint Certification Program certification and ensure full compliance with DFARS 252.204-7012. The solicitation was posted on October 30, 2026, with a response deadline of November 13, 2026.
Spring Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 423610
New
DIBBS
Storage Battery Supplier (NSN 6140-01-694-9187)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the procurement of two storage batteries meeting NSN 6140-01-694-9187 specifications. The supplier is responsible for ensuring all items are marked according to MIL-STD-129 and palletized in compliance with RP001 DLA Packaging Requirements, with a specific mandate that outer packaging be labeled as nonspillable. The contract stipulates that the two packaged and marked batteries must be delivered FOB Origin within 60 days of the order date. This requirement falls under NAICS code 423610 and is intended to support prime contractors delivering on DLA supply contracts.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
Kit Assembly and Packaging ServicesThis subcontract for Kit Assembly and Packaging Services supports the DLA Weapons Support Land Supply Chain by providing final kitting, packaging, and marking for prime contractors. The selected provider will be responsible for gathering components, verifying counts, and ensuring all installation kits are fully assembled, marked, and palletized. All work must strictly adhere to MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130 standards. A critical requirement for this engagement is demonstrated experience with Unique Item Identification marking. The project falls under NAICS code 333999 and is managed by the Department of Defense. Interested parties must submit their responses by December 1, 2026, for performance at the designated facility in zip code 17070-5002.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332322
New
DIBBS
Custom Brackets and Sheet Metal FabricationThis subcontract involves the fabrication of custom formed metal brackets, plates, and housings intended for prime contractors supporting DLA Weapons Support Land Supply Chain installation kits. The scope of work includes sheet metal cutting, bending, punching, and finishing processes that must strictly adhere to TDP Rev B Gen 2 specifications. Additionally, all components must receive finishes that meet rigorous military corrosion resistance standards to ensure durability and performance. Managed under the Department of Defense for the DLA Weapons Support Land Supply Chain, the project falls under NAICS code 332322. The performance of the contract is centered in the 17070-5002 zip code area. Interested parties should note the response deadline of December 1, 2026, for this specialized manufacturing requirement.
Sheet Metal Work Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332710
New
DIBBS
Precision Machined Components for Vehicular Installation KitsThis subcontract involves the manufacture of precision metal parts and hardware intended for vehicular installation kits supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the use of CNC machining, milling, turning, and drilling to produce components that strictly adhere to material specifications and military drawing tolerances as outlined in the TDP Rev B Gen 2 reference drawings. The project is managed under NAICS code 332710 for the Department of Defense. Interested parties must submit their responses by December 1, 2026, for performance located in the 17070-5002 zip code area. The final deliverable consists of finished machined metal components that meet all specified technical requirements for prime contractors.
Machine Shops

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 326220
New
DIBBS
Supply of Rubber O-Rings (NSN 5331-01-119-0468)This subcontract involves the procurement of 478 rubber O-rings, part number 5331-01-119-0468, to support prime contractors under DLA supply contracts. The selected provider is responsible for fabricating or sourcing these components in strict accordance with technical drawings, while providing all necessary material certifications and process operation sheets. All shipments must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, the contract requires full compliance with DFARS prohibitions regarding Chinese military and Huawei-related products. Performance will take place in San Diego, California. The final delivery must include the total quantity of O-rings along with all required certifications to ensure technical and regulatory compliance.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing and Supply of Operating Rods (Aft)This subcontract involves the manufacturing and supply of 20 precision-machined aft operating rods, identified by NSN 5340-01-493-9406, for prime contractors supporting DLA Aviation aircraft hardware projects. The work is managed under the Department of Defense through the DLA Weapons Support Land Supply Chain, falling under NAICS code 336413. The contractor is required to fabricate the components to strict government specifications and implement Unique Item Identification using 2D data matrix symbology in accordance with ISO/IEC 16022. Final delivery must include the specified units along with compliant UII markings and all necessary receiving reports.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 333515
New
DIBBS
Spur Gear Fabrication (P/N 3-51145-1)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture and supply of new, unused spur gears, specifically part number 3-51145-1. The selected contractor must utilize precision gear cutting and machining equipment to ensure the product meets exact technical specifications. A critical requirement of the contract is the performance of Government First Article Testing to validate conformity, with the final deliverables consisting of the physical spur gears and the corresponding test results. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333515. To be eligible, the provider must be an approved source or demonstrate the ability to produce an exact product as outlined in Section L. The response deadline for this requirement is November 30, 2026, with performance taking place in the 84056-5734 zip code area.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336350
New
DIBBS
WEIGHT, COUNTERBALANCE
Solicitation # SPE7L1-27-T-1759
Solicitation SPE7L1-27-T-1759 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of two counterbalance weights, identified by NSN 3040-01-627-0637. The contract requires delivery within 129 days after receipt of order, with shipping and acceptance terms set as FOB Origin. Delivery is designated for the DLA Distribution San Joaquin facility in Tracy, California. Offerors must submit quotes via the DIBBS system and are encouraged to provide quantity ranges to accommodate demand volatility. The procurement is subject to stringent quality and security standards, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001. Key technical restrictions include a total prohibition on Class I ozone depleting chemicals and the unauthorized use of additive manufacturing. The contract incorporates significant regulatory requirements, including ITAR and EAR export controls, CMMC Level 2 cybersecurity certification, and compliance with the Buy American Act and Berry Amendment. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. Payment will be processed electronically through the Wide Area WorkFlow system.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332999
New
DIBBS
ROD, OPERATING, AFT
Solicitation # SPE7L1-27-R-0009
Solicitation SPE7L1-27-R-0009 is a full and open competition procurement issued by the DLA Weapons Support Land Supply Chain for the supply of 20 units of ROD, OPERATING, AFT (NSN 5340-01-493-9406). The required delivery date is 298 days after the date of award, with both inspection and acceptance occurring at the destination. Award decisions will be based on a trade-off between price and non-price factors, with past performance, proposed delivery, and socioeconomic support serving as the primary evaluation criteria. The contract mandates strict compliance with technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and the use of MIL-STD-1916 or ASQ H1331 for sampling. Items must be marked with unique item identifiers using ISO/IEC 16022 two-dimensional data matrix symbology. Due to the nature of the technical data, offerors must possess an approved US/Canada Joint Certification Program certification and adhere to ITAR or EAR export controls. Additionally, the contractor must meet CMMC Level 2 certification requirements and utilize the Wide Area WorkFlow system for electronic invoicing.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332722
Awarded
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-Q-0983
Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
DIBBS
53--BOLT,SHEAR
Solicitation # SPE4A6-26-U-3976
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
DIBBS
NUT, SELF-LOCKING, EXTENDED WASHER, HEXAGON
Solicitation # SPE4A6-26-R-XD26
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS