Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Honeywell Controller Upgrade and License Renewal

Active
SR021120261453Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through Washington Headquarters Services, has issued a notice of intent to sole source a contract for the Honeywell Controller Upgrade and License Renewal, identified by solicitation number SR021120261453. This action is being taken under NAICS code 334512, which pertains to semiconductor and other electronic component manufacturing, indicating the technical nature of the equipment involved. The requirement is for upgrades and licensing renewal of Honeywell control systems, likely critical to operational infrastructure managed by the agency, with performance to occur in Washington, District of Columbia, at the agency's headquarters location. No set-aside provisions are applicable, meaning the contract is open to any qualified vendor without preference for small, minority, or other designated businesses. The notice was posted on August 4, 2026, and responses are due by August 11, 2026, at 2:00 PM Eastern Time. The primary point of contact for inquiries is Peter Polizzi, reachable via email at peter.m.polizzi.civ@mail.mil, and all official documentation is accessible via the SAM.gov portal linked in the posting. The procurement is being conducted as a sole source action, which typically implies that only Honeywell or a specifically designated entity can satisfy the technical, functional, or proprietary requirements of the upgrade and license renewal, possibly due to proprietary software, unique integration needs, or exclusive hardware compatibility with existing systems.

General Info

Sole source contract for Honeywell controller upgrades and license renewals, Washington D.C., responses due August 11, 2026.

Agency

Department Of Defense → Washington Headquarters ServicesView Agency

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance UseView NAICS

Place of Performance

Washington, DC, 20301, USA

Set-Aside

NONE

Documents

(1)

Notice of Intent to Sole Source Award SR021120261453 for Honeywell Controller Upgrade

DOCXnotice-of-intent

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Washington Headquarters Services
Contacts1 person available
OfficeWASHINGTON, DC, 203011000, USA
Organization / Agency
Department Of Defense → Washington Headquarters Services
View Agency Profile
Office AddressWASHINGTON, DC, 203011000, USA
Contacts
Peter Polizzi

Full Description

Show more

Notice of Intent to Sole Source,  See Attachment.

Similar Contracts

Same NAICS industry code

NAICS: 334512
New
DIBBS
CONTROL, ALARM
Solicitation # SPE4A6-26-T-12ST
This contract, under solicitation SPE4A6-26-T-12ST, governs the procurement of four units of a critical alarm component identified by NSN 6350-01-507-8243 and part number AL8-2, supplied by Tyco Fire Products LP, Northrop Grumman Systems Corporation, and Deif A/S. The item is classified as a critical application item with strict compliance requirements for physical identification and bare item marking per RQ017, and all packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking applied. Deliveries are to be made FOB origin within 170 days to the designated receipt location in Tracy, California, with zero tolerance for quantity variance. Inspection and acceptance occur at destination, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions controlled by the solicitation issue date for simplified acquisitions or RFP issue date for larger ones, unless amended. Configuration changes require an Engineering Change Proposal and formal variance request, while source approval necessitates full documentation per RC001. The contract enforces strict adherence to DLA packaging standards RP001 and palletization guidelines, with transportation instructions referenced in DLAD Proc Notes C19 and C20. Payment terms are based on a fixed unit price of $4.00 per unit, totaling $16.00, with a required ship date of January 31, 2027, and original delivery deadline of April 20, 2027. The contracting activity is the ASC Commodities Division, Department of Defense, with Roberto Roldan as the primary point of contact for all inquiries.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-331G
This contract pertains to the procurement of a dial indicating pressure gage, identified by NSN 6685009894670 and part number DG4MC60PWCANA, with a quantity of 13 units to be delivered FOB origin within 229 days. The item must comply with stringent technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality provisions, inspection and acceptance at origin, and specific packaging standards in accordance with MIL-STD-2073-1E and DLA packaging guidelines. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated, and attributes are assigned verification levels or AQLs as specified. The supplier is required to conduct first article testing at certified facilities and submit final reports to the Naval Surface Warfare Center in Philadelphia for approval. The pressure gage must be physically marked per MIL-STD-129 with special marking code 05 indicating it is a delicate instrument and palletized according to DLA requirements. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact surfaces, except for specific functional uses such as in batteries, fluorescent lights, instrumentation, weapon systems, or chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment barrier per NAVSEA 5100-003D. The unit of issue is each, with no variance permitted in quantity, and acceptance occurs at origin. The contract references multiple technical documentation standards including MIL-G-18997E and DI-DRPR-80651, and compliance with all applicable DLA requirements is mandatory. The solicitation is issued under contract number SPE4A5-26-T-331G, with a response deadline in August 2026, and the point of contact is Marcus Williams of the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
MANUAL STATION
Solicitation # SPE8E8-26-T-5060
This contract, issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-5060, specifies the procurement of 18 units of a MANUAL STATION identified by NSN 6350016023428 and part number 0403-1-436-001 REV G, with a unit price of $18.00 and a total contract value of $324.00. Delivery is required FOB origin within 167 days from the award date, with no variance permitted in quantity, and inspections and acceptance are to occur at the destination warehouse in Tracy, California. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is classified as hazardous under FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, but subject to the higher precedence of DLA requirements. Palletization must follow RP001 guidelines, and the unit of issue is each (EA). The shipping and delivery address is the DLA Distribution San Joaquin warehouse, and the required ship date is February 1, 2027, with the original delivery deadline of October 27, 2026. Transportation and freight instructions are governed by DLAD Proc Notes C19 and C20. The contract incorporates technical and quality standards referenced by R and I numbers from the DLA Master List, which are accessible online and whose revision status is controlled by the solicitation issue date or amendment, depending on acquisition size. The item is associated with multiple part numbers from different suppliers, including Gibbs & Cox Inc. and CERBERUS PYROTRONICS Inc., indicating potential component sourcing. The contract falls under NAICS code 334512 and is a federal acquisition with no set-aside designation. The point of contact is Alexis Selby at DLA San Joaquin, and responses were due by August 17, 2026, with the solicitation posted on August 5, 2026. All documentation must align with DLA’s authorized unit of issue standards, as defined in their official Excel reference, and the government’s right to remove identification
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-329T
The contract specifies the procurement of a dial indicating pressure gauge identified by NSN 6685012957435 and part number SG4MC10KPWRONAG, with a requirement for 20 units delivered FOB origin within 291 days. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. The item is designated as a critical application with specific identification and marking requirements per MIL-STD-129 and the special marking code 05 for delicate instrument. Packaging must conform to MIL-STD-2073-1E with defined packaging methods, materials, and unit container codes, and palletization must adhere to DLA packaging rules. Mercury and mercury-containing compounds are strictly prohibited unless functional use is explicitly exempted and meets safety standards outlined in NAVSEA 5100-003D, requiring secondary containment for portable devices. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request. Measuring and test equipment used must meet RT001 standards, and the contract references the QAP-106 and MIL-G-18997E technical documentation. The purchase request number is 7017742652, the solicitation number is SPE4A5-26-T-329T, and point of contact is Aprile Corley of the Department of Defense’s ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-323K
The contract is for the procurement of four pressure dial gauges identified by NSN 6685-01-205-3830 and part number 19HCXXX0X15E1BXAXX05 under solicitation SPE4A5-26-T-323K, a total small business set-aside with NAICS code 334512. Delivery is required within 171 days of award to the destination warehouse in Tracy, California, with FOB origin terms and no quantity variance allowed. Inspection and acceptance occur at the destination point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for delicate instruments. The contract incorporates DLA’s master technical and quality requirements, which govern sampling procedures using MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs of VII, IV, II or 0.1, 1.0, 4.0 respectively. Mercury and mercury-containing compounds are strictly prohibited in the product or its packaging unless specifically exempted for functional components like batteries or instruments, and portable mercury-containing devices must have double containment as per NAVSEA 5100-003D. Preservation, packaging, and marking must also exclude mercury entirely. The unit of issue is each, priced at $4.00 per unit, totaling $16.00. The solicitation closes on August 12, 2026, with award anticipated shortly after, and primary contact is Aliza Wyche of the DLA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-310D
The contract solicits one unit of a GAGE, PRESSURE, DIAL with NSN 6685-01-030-0260 under solicitation SPE4A5-26-T-310D, issued by the Defense Logistics Agency’s Aviation division. The requirement is for an automated simplified acquisition with a response deadline of August 7, 2026, and delivery is required within five days after delivery order issuance, with the item destined for Turkey under a Foreign Military Sales (FMS) program using regular FOB Origin terms. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with sampling methods mandated to follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, and critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. The item must be manufactured in compliance with SAE AS9003 or ISO 9001 tailored to SAE AS9003 standards, with origin inspection required under FAR 52.246-2 and acceptance also occurring at origin. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, including the special marking code 05-05 for delicate instruments, and palletization must adhere to DLA Packaging Requirements (RP001); hazardous material packaging must comply with 29 CFR 1910.1200. Export-controlled technical data is applicable, governed by DFARS 252.225-7048, restricting access to contractors with approved JCP certification, completed training, and DLA authorization. The solicitation incorporates the DLA Master Solicitation Revision 105 (May 20, 2026) and applies numerous FAR and DFARS clauses including cybersecurity safeguards under DFARS 252.204-7012, NIST SP 800-171 assessment requirements with deviation 2026-O0025, restrictions on covered defense telecommunications equipment under DFARS 252.204-7018, and prohibitions on hexavalent chromium and toxic materials.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSURE
Solicitation # SPE4A5-26-T-323N
The contract is for the procurement of pressure transmitters under solicitation SPE4A5-26-T-323N, with a Women-Owned Small Business Set-Aside designation, and is governed by DLA packaging and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements. The item, identified by NSN 6685014917943 and part numbers from approved manufacturers including DRUCK, KULITE, G P 50 NEW YORK, and HYDAC, must comply with strict sampling standards such as MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Verification levels and AQLs are mandated for critical, major, and minor attributes, and manufacturers may choose between attribute or variable inspection methods. Physical identification and marking must adhere to MIL-STD-129 with no special marking codes applied, and packaging must follow MIL-STD-2073-1E with U-pack code, including specific packaging methods and materials for preservation and cushioning. The contract calls for delivery of 90 units, each priced at $90.00, totaling $8,100.00, with a delivery timeline of 171 days after award, FOB origin, and inspection and acceptance to occur at destination. The quantity variance is strictly zero percent, meaning no over or under shipments are permitted. Palletization must meet DLA packaging requirements, and all units are to be delivered to New Cumberland, Pennsylvania, 17070-5002. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division. Contract inquiries and communications are to be directed to Jamie Bonda at the provided contact information, and the NAICS code 334512 applies to the sensor manufacturing classification. The unit of issue is each (EA), consistent with DoD standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
SWITCH, THERMOSTATIC
Solicitation # SPE7M8-26-T-5516
The contract pertains to the procurement of ten thermostatic switches with NSN 5930-00-061-2357 under solicitation SPE7M8-26-T-5516, issued by the Department of Defense’s Electrical Devices Division. Delivery is required within 168 days after the date of order to DLA Distribution at New Cumberland, Pennsylvania, with FOB Destination terms placing responsibility for transportation and risk on the contractor until receipt at the delivery point. The solicitation, posted on August 4, 2026, with a response deadline of August 7, 2026, falls under NAICS code 334512 for other electronic component manufacturing and is subject to simplified acquisition procedures. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, incorporating referenced standards such as MIL-STD-129 for labeling, ASTM D3951 for commercial packaging, and RP001 for packaging and palletization. The item must adhere to strict mercury restrictions, prohibiting intentional introduction of mercury or mercury compounds except in sanctioned components like sensors or fluorescent lamps that include secondary containment per NAVSEA 5100-003D. All packaging and labeling must align with federal guidelines including Hazard Communication Standard (29 CFR 1910.1200) and prohibit hexavalent chromium, with no tolerance for non-conformances during inspection, which occurs at the destination using zero non-conformance sampling per MIL-STD-1916. Payment must be processed through WAWF with electronic invoicing, and the contractor is required to maintain active SAM registration with valid UEI and CAGE codes. All submissions must be made via the DLA Internet Bid Board System, and the contractor must comply with extensive cybersecurity and data protection clauses including 252.204-7012 for safeguarding covered defense information. Further, the contract incorporates provisions addressing trafficking in persons, employment eligibility, equal opportunity, export controls, and restrictions on procurement from communist Chinese military companies, while prohibiting unauthorized storage or disposal of hazardous materials. No specific pricing is listed, and the contract type is not confirmed, though the nature of the acquisition suggests a firm-fixed-price structure. The absence of detailed evaluation factors or a formal Section J indicates reliance on the DLA Master Solicitation for procedural guidance.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSURE
Solicitation # SPE4A5-26-T-325Y
The contract pertains to the procurement of two pressure transmitters, part number BT5-T4-44G-P, with NSN 6685-01-728-2144, classified as a critical application item. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s facility. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, with no special markings required. Packaging must follow RP001 guidelines and be palletized accordingly. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date based on acquisition type. Measuring equipment must meet RT001 standards, and source approval documentation must comply with RC001. The contract specifies delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation directives governed by DLAD Proc Notes C19 and C20. The required ship date is January 31, 2027, with the original delivery deadline set for April 9, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
CASE
Solicitation # SPE4A5-26-T-321V
This contract, issued under solicitation SPE4A5-26-T-321V by the Department of Defense’s DLA, specifies the procurement of one unit of NSN 6685010500031, part number 0414-2153, manufactured by Rogerson Kratos with CAGE code 34830. The item is classified as a Critical Application Item and must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any industry standards such as ASTM D3951. Packaging must adhere strictly to RP001 DLA Packaging Requirements, MIL-STD-129 for labeling, and FED-STD-313 for hazardous material handling, with non-hazardous items requiring commercial packaging compliant with ASTM D3951 only if not overridden by DLA standards. The item must be delivered FOB origin within 171 days, with inspection and acceptance occurring at destination, and zero tolerance for quantity variance. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandatory, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless explicitly stated otherwise, where critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0. All packaging and palletization must meet RP001 guidelines, and the unit of issue is EA as defined by DLA’s authorized standards. Delivery is to DLA Distribution Depot Hill at Hill AFB, Utah, with a required ship date of January 31, 2027, after the original delivery deadline of December 8, 2026. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the solicitation was posted on August 4, 2026, with a response deadline of August 12, 2026. Primary point of contact is Aliza Wyche.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A6-26-T-11YW
The contract is for the procurement of 283 units of a dial indicating pressure gauge with NSN 6685-01-432-4038 and part number 750SS4004LA15, under solicitation SPE4A6-26-T-11YW, a total small business set-aside under NAICS code 334512. Delivery is required within 92 days from the award date, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance both occur at the destination. The item is classified as a critical application and must be marked in accordance with MIL-STD-129 with a special marking code of 05 indicating it is a delicate instrument. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including use of unit container D3, intermediate container E5, and pack code U. All physical identification and marking requirements are governed by RQ017. Sampling and quality inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, and documentation for source approval must adhere to RC001. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is February 23, 2027, with a needed ship date of May 13, 2026. The contract is managed by the ASC Commodities Division under the Department of Defense, with Shameka Edwards as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Washington Headquarters Services

Same awarding agency

NAICS: 541715
New
Federal
Sources Sought: Call For Technology Independent Verification &Validation (IV&V) 27-1: Spectrum Proof
Solicitation # IVV271
The US Army V Corps, in partnership with the Defense Innovation Unit, is conducting an open sources sought for the Spectrum Proof Independent Verification and Validation (IV&V) event to identify and evaluate emerging Electromagnetic Warfare (EW) technologies aligned with the Eastern Flank Deterrence Initiative. The initiative seeks capabilities that enable the U.S. Army and NATO forces to achieve electromagnetic spectrum superiority in dense, contested, and denied environments by providing seamless sensing, identification, targeting, and non-lethal disruption of adversary systems across all echelons. Submissions must demonstrate alignment with five key verticals: Electromagnetic Support and Surveillance, Common Services, Electromagnetic Attack, Sensor-to-Shooter Integration, and Resilience in Degraded Environments. Technologies must be optimized for Size, Weight, Power, and Cost (SWaP-C), support open architectures like MOSA and SOSA, incorporate AI/ML for real-time signal classification and automation, and operate effectively in DDIL (Distributed, Disaggregated, Integrated, Limited) conditions without relying on robust network connectivity. Respondents are required to submit a ten-page whitepaper detailing the technology’s development, operational history, current Technology Readiness Level (TRL), and specific alignment with one or more verticals, along with a single-page technology quad chart that summarizes capability, prior deployments, TRL, and a full technical point of contact. Submissions must be unclassified and properly marked for proprietary or sensitive information. The government will evaluate submissions through a peer review panel of military, industry, and academic experts based on technical merit, mission alignment, and integration potential. Participation in the Spectrum Proof event, scheduled for November 2–6, 2026, at Fort Knox, Kentucky, is not guaranteed, and no costs incurred in response to this sources sought will be reimbursed. There is no obligation to award any contract from this effort, but selected technologies may be invited to participate in a follow-on experimentation event in the EUCOM theater in third quarter fiscal year 2027 under authorities including 10 U.S.C. 4021, 4022, and 3458. Offerors must affirm they are acting solely as technology demonstrators and will not evaluate other submissions to prevent conflicts of interest. Government support contractors with access to proprietary data are bound by strict non-disclosure obligations, and all evaluation results will remain within government control with Letters of Observation issued to participants.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 days ago

DEADLINE

in 5 days
View Details
NAICS: 541512
Federal
IT & Data Rights Compliance SupportThis contract requires full adherence to Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement data rights clauses to ensure proper handling of technical data and intellectual property rights under government agreements. The contractor must manage all technical data deliverables in accordance with statutory and regulatory requirements, including identification, marking, and transmission of controlled information, while maintaining strict compliance with government-mandated data rights protections. The scope includes supporting the secure handling of government-furnished information, ensuring confidential and sensitive data is protected throughout its lifecycle using approved security protocols and access controls. The work is classified as a subcontract under NAICS code 541512 for other computer related services and is solicited by Washington Headquarters Services under the Department of Defense. The contract is open for response until August 24, 2026, with no specific set-aside designation applied. Performance location details are not specified, indicating potential flexibility or multi-site operations. Contractors must be prepared to demonstrate robust processes for data management, compliance documentation, and secure information handling to meet DoD standards without direct oversight from a listed point of contact.
Computer Systems Design Services

POSTED

12 days ago

DEADLINE

in 19 days
View Details