Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOSE, AIR DUCT

Active
SPE7M4-26-T-338GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of seven air duct hoses, identified by NSN 4720016547192 and part number 5MA1155-1 from Goodrich Corporation. The requirement is designated as a critical application item and is set aside for total small businesses under NAICS code 326220. Delivery is required within 168 days, with a final need date of February 9, 2027, shipping FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The supplier must adhere to strict quality and technical standards, including ISO 9001:2015 for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Item Unique Identification is required per MIL-STD-130, and packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331.

General Info

Procure seven air duct hoses from Goodrich Corporation for delivery to Tinker AFB.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

SBA

Documents

(1)

SPE7M4-26-T-338G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOSE,AIR DUCT
HOSE,AIR DUCT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
GOODRICH CORPORATION 0ACH4 P/N 5MA1155-1
SPE7M4-26-T-338G
SECTION B
PR: 7017529343 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017529343 0001 EA 7.000
NSN/MATERIAL:4720016547192
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:02/09/2027 Original Required Delivery Date:10/14/2026
SPE7M4-26-T-338G NSN/Part Number: 4720-01-654-7192 Quantity: 7 EA Purchase Request: 7017529343QTY: 7 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-337H
This contract is for the procurement of 248 nonmetallic hose assemblies, identified by NSN 4720017030478 and part number 12701503. The order is governed by technical drawing 19207 12701503 Revision D and requires strict adherence to DLA quality and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the use of Class I ozone depleting chemicals in the manufacture or incorporation of the items. The delivery is set for 177 days after order, with a required delivery date of February 18, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contractor must maintain supply chain traceability documentation per DLA Directive C03 and ensure all packaging and palletization comply with RP001 requirements. This is a total small business set-aside under NAICS code 326220.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-337P
This contract is for the procurement of 13 nonmetallic hose assemblies under solicitation SPE7M4-26-T-337P for the Department of Defense Fluid Handling Division. The items must be manufactured according to technical drawing 19207 12506132 Revision D and comply with ISO 9001 quality standards. A First Article Test requirement is included as a separate line item to verify product compliance before full delivery. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-129 labeling, and ASTM D3951 standards. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited. The required delivery date for the primary quantity is January 12, 2027, with a delivery window of 188 days.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M4-26-T-337K
This contract is for the procurement of 50 units of nonmetallic tubing, identified by NSN 4720-01-663-4733, for the Department of Defense Fluid Handling Division. The items are designated as critical application components for Denel vehicle systems. Delivery is required within 74 days, with a specified need ship date of September 17, 2024, and a final delivery date of September 25, 2024. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals. The tubing is classified as a Type I item with a non-extendable shelf life of 180 months, requiring specific markings per MIL-STD-129 on all packaging levels. Packaging and palletization must comply with MIL-STD-2073-1E and RP001 DLA packaging requirements. Inspection and acceptance will take place at the point of origin.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M0-26-T-041M
This contract, identified as SPE7M0-26-T-041M, is a solicitation by the Department of Defense Maritime Supply Chain ESOC Buys for the procurement of one foot of air duct hose. The required item is specified as NSN 4720-01-644-8444, with Clemco Industries Corp part number 25969-4FT. The delivery is required within five days after the order, with a final required delivery date of August 13, 2026. The shipment is destined for the U.S. Naval Air Facility Atsugi in Japan, with both inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. The contract allows for a quantity variance of plus 10 percent and minus 0 percent. Technical and quality requirements are governed by the DLA Master List, and the contract specifies the removal of government identification from any non-accepted supplies.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-338A
This contract is for the procurement of 26 nonmetallic hose assemblies, identified by NSN 4720-01-455-5792 and part number 0043-0035-1 from Safran Electronics and Defense. The order is issued under solicitation SPE7M4-26-T-338A by the Department of Defense Fluid Handling Division as a total small business set-aside. Delivery is required within 74 days, with a need ship date of May 27, 2025, and a final required delivery date of June 12, 2025. The items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance with specific technical and quality requirements is mandatory, including DLA packaging standards, MIL-STD-129 marking, and the implementation of Item Unique Identification due to the cost of the items. Inspection and acceptance will take place at the destination.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M1-26-T-282D
This contract is for the procurement of one nonmetallic hose assembly, identified by NSN 4720-99-968-5262 and part number 613/80143 from J.C. Bamford Excavators Limited. The order is managed by the Maritime Supply Chain under the Department of Defense with a delivery requirement of five days after the order is placed. The terms specify delivery as FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to several technical and quality requirements, including DLA packaging standards and the prohibition of Class I ozone-depleting chemicals. Marking must comply with MIL-STD-129, and palletization must follow RP001 guidelines. This specific material does not have a shelf life requirement, and the contract allows for no quantity variance.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M4-26-T-336W
This contract is for the procurement of one unit of nonmetallic tubing, identified by NSN 4720016205365 and part number 3847AS279-6 from Carolina Growler Inc. The order is managed by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-336W, with a required delivery date of August 11, 2026, and a delivery timeframe of 20 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination in Jacksonville, North Carolina. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards per ASTM D3951 and MIL-STD-129. Environmental restrictions are highlighted, specifically prohibiting the intentional addition of mercury or the use of Class I ozone-depleting chemicals. All shipments must be handled via the fastest traceable means to the Marine Aviation Logistics Squadron 26 at MCAS New River.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-337E
This contract is for the procurement of two non-metallic hose assemblies, identified by NSN 4720-01-733-5954 and Cummins Inc. part number 5447187. The order is issued by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-337E. Delivery is required within 30 days of the order, with a required delivery date of September 24, 2026. The items are to be shipped FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards RP001 and ASTM D3951, with labeling following MIL-STD-129. There is a zero percent quantity variance allowed, and both inspection and acceptance will occur at the destination. The material does not have a shelf life requirement, and the contract mandates the removal of government identification from any non-accepted supplies per requirement RQ011.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M1-26-T-281X
This contract is for the procurement of one nonmetallic hose, identified by NSN 4720-01-724-8819 and HBD Industries part number 667504298. The order is managed under solicitation SPE7M1-26-T-281X with a required delivery date of July 30, 2026, and a delivery timeframe of five days after order. The item is to be delivered FOB Origin and will be inspected and accepted at the destination, which is the 0225 CS BN CO A Maintenance facility at Schofield Barracks, Hawaii. The contractor must adhere to several technical and quality requirements, including DLA packaging standards, physical item marking per MIL-STD-130N, and the retention of supply chain traceability documentation. There is a strict prohibition against the use of Class I ozone-depleting chemicals in the manufacture or delivery of the item. All marking and palletization must comply with MIL-STD-129 and RP001 requirements to ensure proper government identification and transport.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-338E
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 30 nonmetallic hose assemblies under part number 0001S00000053. The contract requires delivery within 160 days after receipt of order and is categorized under NAICS code 326220. Performance is designated for New Cumberland, Pennsylvania, with a response deadline of August 24, 2026. Strict compliance measures are in place regarding security and data handling. The contractor must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Furthermore, the technical data is subject to ITAR and EAR export controls, requiring the contractor to have an approved US/Canada Joint Certification Program certification and completed DLA export-control training to access the necessary documentation.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
Federal
HOSE,NONMETALLIC
Solicitation # N0010426QEE04
This solicitation, number N0010426QEE04, is issued by the Navsup Weapon Systems Support Mech for the procurement of nonmetallic hoses. The contract is a fixed-price agreement with FOB-destination terms, requiring compliance with specific technical documentation, including Individual Repair Part Ordering Data and associated drawings available through the government's e-commerce portal. Key requirements include strict adherence to document revision levels, a prohibition on the intentional use of mercury, and specific packaging standards such as MIL-PRF-23199 and MIL-STD 2073. The contractor must maintain an acceptable inspection system and provide detailed reports, including procedure packages and certified reports of test and inspection, as specified in the DD Form 1423. Pricing for quotations is generally valid for 60 days after the closing date. The agreement also incorporates various federal mandates, including equal opportunity for veterans and workers with disabilities, cybersecurity maturity model certification, and priority ratings for national defense. All technical and quality requirements are governed by a defined order of precedence, with contract amendments taking highest priority.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 326220
New
Federal
HOSE,CONTAMIN,15FT
Solicitation # N0010426QEE03
This solicitation is for the manufacture and design of a 15-foot contamination hose, specifically part number 383482AW15-N from manufacturer Tiger-Vac Inc. The contract is a fixed-price agreement with FOB-destination shipping and requires strict adherence to technical specifications, including the total exclusion of mercury and specific packaging standards such as MIL-STD-2073. Pricing for quotations remains valid for 60 days after the closing date. The agreement emphasizes high-level quality requirements and mandates the use of Wide Area Workflow for payments. Contractors must maintain an inspection system acceptable to the government and provide a Certificate of Compliance upon delivery. Technical documentation is managed through a secure portal, and any requests for waivers or deviations regarding delivery dates or technical non-conformance must be submitted with detailed justification to the contracting officer.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, METALLIC
Solicitation # SPE7M4-26-Q-0958
This contract is a solicitation for the procurement of 41 metallic hose assemblies under NSN 4720-00-827-4988. The agreement is established as a Firm Fixed Price contract with a total small business set-aside. Delivery is required within 207 days after order, with the final destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The items are designated as critical application items, and several approved manufacturers are listed, including Smiths Tubular Systems, Parker Hannifin Corp, Senior Operations LLC, Flexible Metal Inc, and Pacific Aero Components. Strict compliance is required regarding the prohibition of Class I ozone depleting chemicals and adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129. All technical and quality requirements are governed by the DLA Master List.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 21 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-337M
This contract is for the procurement of 177 feet of metallic aluminum tubing, identified as a critical application commercial item. The tubing must have an outer diameter of 0.375 inches, a wall thickness of 0.028 inches, and be provided in random lengths between 10 and 12 feet with a T6 temper. It must adhere to SAE AMS 4083K specifications and be capable of a maximum operating pressure of 3,000 psi. The agreement specifies a delivery timeframe of 170 days with a required delivery date of April 13, 2027, shipping FOB Origin to DLA Distribution Depot Hill. Quality assurance requires inspection and acceptance at the origin, following MIL-STD-1916 or ASQ H1331 sampling plans. Packaging and preservation must comply with MIL-STD-2073-1E and ASTM B660, and the contract strictly prohibits the use of Class I ozone-depleting chemicals.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-26-T-8244
This contract is for the procurement of 28 aluminum alloy hose clamps with a 3.563 inch inner diameter, identified by NSN 4730-01-070-7965 and part numbers DEA-02287 and C9557-1. The items are designated as critical application items and must adhere to specific technical drawings and quality standards, with a strict prohibition on porosity and surface defects around bolt holes. Delivery is required within 256 days, with a need ship date of May 8, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. Quality assurance is stringent, requiring DCMA inspection and acceptance at the origin. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, and the use of Class I ozone-depleting chemicals is strictly prohibited. The contract incorporates the DLA Master List of Technical and Quality Requirements and specifies a zero percent quantity variance.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336214
New
DIBBS
ENGINE CONTROL UNIT
Solicitation # SPE7M4-26-T-337A
This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of one Engine Control Unit, specifically Perkins Engines Inc part number 28170119 with NSN 2010016533125. The agreement specifies a delivery timeline of 20 days after order, with the final required delivery date set for August 11, 2026. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. The item must be delivered to the Commander Naval Air Force Pacific Fleet at Naval Air Station North Island in San Diego, California. Strict adherence to DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking is required. The shipment must be sent via the fastest traceable means, and the use of parcel post is explicitly prohibited.
Travel Trailer and Camper Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M4-26-T-337F
This contract is for the procurement of 655 feet of non-metallic rubber tubing with a 1.25 inch inner diameter and 1.5 inch outer diameter. The item is designated as a critical application component with a non-extendable shelf life of 120 months. It must adhere to technical specifications MIL-PRF-6855 and MIL-STD-129R, and the contractor is prohibited from intentionally adding mercury or mercury-containing compounds to the hardware. The agreement requires First Article Testing (FAT) and government source inspection at the point of origin. Delivery is set as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania, with a quantity variance allowance of plus or minus 10 percent. Packaging and marking must comply with MIL-STD-2073-1E and DLA packaging requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
ELBOW, PIPE TO HOSE
Solicitation # SPE7M3-26-T-8246
This contract is for the procurement of pipe-to-hose elbows made from cadmium-plated copper alloy, featuring a 90-degree flow angle with a 3/8 inch ID hose size and a 1/4 inch nominal pipe size. The items are designated as critical application components and must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturer List or Qualified Products List. The total quantity required is 153 units, split between two delivery locations: 71 units to DLA Distribution Barstow and 82 units to DLA Distribution Albany. The delivery period is set at 161 days after the order, with a required delivery date of May 12, 2027. Compliance with various military standards is mandatory, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires adherence to DLA packaging requirements. Shipping is FOB Origin, and inspection and acceptance will occur at the destination.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
NIPPLE, PIPE
Solicitation # SPE7M3-26-T-8240
This contract is for the procurement of 42 units of CRES material pipe nipples, measuring 1.00 inch at all ends, conforming to SAE J514-3 standards for hydraulic tube fittings. The order is identified by NSN 4730-01-540-5369 and part number 16-16 140137SA. Delivery is required within 218 days, with a final need date of March 31, 2027, shipped FOB Origin to DLA Distribution Anniston in Alabama. The supplier must adhere to strict quality and technical requirements, including DLA packaging standards, MIL-STD-129 labeling, and ASTM D3951 packaging. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the use of Class I ozone depleting chemicals in the production or delivery of the items.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-337Z
This contract is for the procurement of 41 nonmetallic hose assemblies under solicitation SPE7M4-26-T-337Z for the Department of Defense Fluid Handling Division. The items are identified by NSN 4720013765640 and correspond to part numbers AS213H0180G from Eaton Aeroquip LLC and 7D0181E0180B from The Boeing Company. This is designated as a critical application item with a delivery requirement of 133 days after order, featuring a need ship date of January 5, 2027, and an original required delivery date of April 14, 2027. The agreement specifies delivery FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements RP001. The contract also incorporates technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
MAST, ASSY, CANOPY
Solicitation # SPE7M4-26-T-337Q
This solicitation, issued by the Department of Defense Fluid Handling Division, is for the procurement of 92 units of Canopy Mast Assemblies under part number 2040-00-883-2002. The contract is designated as a Total Small Business Set-Aside under NAICS code 332510, with a required delivery timeframe of 161 days after receipt of order. Performance is centered in New Cumberland, Pennsylvania. Compliance requirements are stringent, requiring the contractor to be a CMMC Level 2 Certified Third-Party Assessment Organization. Additionally, the project involves technical data subject to ITAR and EAR export controls, necessitating prior authorization from the Department of State or Commerce and an approved US/Canada Joint Certification Program certification. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details