This Solicitation opportunity from Department Of Defense was posted on May 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HOSE ASSEMBLY, METAL

Closed

SPE7M4-26-T-119RFederal

Submission Closed06/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326220

New

DIBBS

Manufacturer of Nonmetallic Special Shaped Section Seal (NSN 5330-01-681-5487)This subcontract involves the manufacture and supply of one nonmetallic special shaped section seal for prime contractors supporting DLA Weapons Support Land Supplier Operations. The contractor is required to produce part number 12621762 in accordance with NSN 5330-01-681-5487 specifications, utilizing asbestos-free materials and adhering to the DLA Master List of Technical and Quality Requirements RA001. A critical delivery requirement is that the seal must have a remaining shelf life of 153 months upon receipt. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency, with the place of performance located at Fort Hood. The procurement falls under NAICS code 326220. Interested parties must note the response deadline of November 9, 2026, for this specific manufacturing requirement.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Nonmetallic Fire Fighting Hose Assembly SupplierThis subcontract, issued by the Department of Defense through the DDSP New Cumberland Facility, requires the manufacture and supply of 116 nonmetallic fire fighting hose assemblies for prime contractors fulfilling DLA supply contracts. The specific requirements call for Type B noncollapsible synthetic rubber hose assemblies measuring 1.5 inches in internal diameter and 50 feet in length, equipped with 1.5 inch NPSH thread brass couplings. All products must strictly adhere to MIL-SPEC standards for synthetic rubber noncollapsible fire fighting hoses and meet DLA quality conformance standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326220, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Specialized O-Rings (NSN 5331-01-669-5446)This subcontract involves the manufacture or procurement of specialized O-rings under NSN 5331-01-669-5446 to support prime contractors for the Department of Defense DLA Weapons Support Maritime Supply Chain. The contractor must ensure all materials are ozone-compliant and asbestos-free, with a requirement to deliver two O-rings to the Naval Facility in Everett, Washington. Full supply chain traceability is mandatory for these components. Strict adherence to military standards is required for the fulfillment of this order. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 to ensure adequate UV protection, while all marking must follow MIL-STD-129. The project falls under NAICS code 326220, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supplier of Elastic Cord Assemblies (NSN 4020-01-572-0958)This subcontract involves the manufacture or sourcing of 1,092 linear feet of elastic cord assemblies meeting NSN 4020-01-572-0958 specifications for prime contractors supporting DLA Troop Support. The selected supplier must ensure all products are marked and labeled according to MIL-STD 129 and strictly adhere to the DLA Master List of Technical and Quality Requirements RA001. Managed under the Department of Defense with performance located in New Cumberland, Pennsylvania, the contract requires the supplier to maintain an active SAM registration to facilitate access to the Wide Area Workflow system. Interested parties must submit their responses by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Plastic Spiral Wrap Tubing SupplierThis subcontract involves the manufacture or procurement of 551 feet of plastic spiral wrap tubing meeting NSN 9330-01-345-2863 for prime contractors supporting Department of Defense supply contracts. The materials must be packaged according to ASTM D3951 and RP001 standards and labeled in compliance with MIL-STD-129. Delivery is required FOB Origin to DLA Distribution San Joaquin in Tracy, California. The supplier must adhere to strict regulatory requirements, including DLA RA001 and DFARS 252.204-7012 cybersecurity reporting standards. This opportunity falls under NAICS code 326220 and is managed by the Defense Logistics Agency.

POSTED

DEADLINE

Supply of Air Duct Hose (NSN 4720-01-644-8426)This subcontract involves the supply of one 4.000-inch I.D. air duct hose for prime contractors supporting DLA supply contracts for the Naval Air Warfare Center Air Division. The equipment must strictly adhere to NSN 4720-01-644-8426 and DLA Master List technical specifications. All materials are required to be DFARS compliant and free of Class I ozone-depleting chemicals. The contractor is responsible for packing and marking the items in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001. Performance will take place in Patuxent River, with the final deliverable being the completed and accepted hose. This requirement is managed under the Department of Defense through the DLA Weapons Support Fluid Handling Division.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supplier of Lacing and Tying Tape (NSN 4020-01-474-2482)This subcontract involves the manufacture or distribution of lacing and tying tape to support prime contractors delivering on Department of Defense supply contracts. The specific requirement is for 73 units of NSN 4020-01-474-2482, with performance taking place at Hill AFB. All materials must adhere to technical specification CID A-A-52084B and the DLA Master List of Technical and Quality Requirements. Compliance standards are strict, requiring packaging per ASTM D3951 and RP001 and marking according to MIL-STD-129. To be eligible, suppliers must be listed on the Qualified Suppliers List for FSC 4020. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, under NAICS code 326220.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Nonmetallic Hose Assembly ManufacturerThis subcontract involves the manufacture and supply of 170 nonmetallic hose assemblies for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for fabricating the assemblies according to NSN 4720-01-673-8548 and the DLA Master List of Technical and Quality Requirements, ensuring all units are completed, marked, and delivered. Strict quality and security standards are required for this engagement, including SAE AS9003 or ISO 9001 quality systems and NIST SP 800-171/CMMC Level 2 compliance. Additionally, all products must be packaged in accordance with ASTM D3951 and MIL-STD-129. The place of performance is located at Tinker AFB, and the response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Nonmetallic Hose Assembly (NSN 4720-01-655-2140)This subcontract involves the manufacture or procurement of one nonmetallic hose assembly, part number 0625-09-0399-03, conforming to NSN 4720-01-655-2140 specifications for the DLA Weapons Support Fluid Handling Division. The project strictly prohibits the use of additive manufacturing and mercury compounds. All deliverables must adhere to the Buy American Act and the Berry Amendment, with packaging requirements meeting RP001, MIL-STD-129, and ASTM D3951 standards. The completed assembly is to be delivered FOB Origin to the USS Dwight D Eisenhower (CVN 69). This requirement falls under NAICS code 326220 and is managed by the Department of Defense. Interested parties must note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

O-Ring Supplier (NSN 5331-01-503-0435)This subcontract involves the manufacture or procurement of a high-precision O-ring for the Department of Defense, specifically supporting the DLA Weapons Support Land Supply Chain. The supplier must ensure the component complies with NSN 5331-01-503-0435 and adheres to all technical and quality standards outlined in the DLA Master List. Strict material requirements are in place, mandating that the product be free of mercury and fully compliant with the Buy American Act and the Berry Amendment. The project falls under NAICS code 326220 and requires the delivery of a single O-ring meeting specific elastomer or composite specifications. The performance location is designated as FPO 96662. Interested parties must respond by November 9, 2026, to meet the requirements of this defense supply chain procurement.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Non-Metallic Hose Assemblies (NSN 4720-01-541-8134)This subcontract involves the supply of three non-metallic hose assemblies, specifically NSN 4720-01-541-8134, for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The selected provider is responsible for either manufacturing or sourcing the assemblies, ensuring all items are marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E and RP001 DLA Packaging Requirements. The contract falls under NAICS code 326220 and requires strict adherence to DFARS 252.239-7098. Performance for this requirement is centered in New Cumberland, Pennsylvania. Interested parties must have submitted their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0381

Solicitation SPE8E8-27-T-0381 is a federal procurement for 625 units of desiccant cartridges, identified by NSN 4440015994929 and part number TA330-RC-2684 from AGM Container Controls Inc. The contract is issued by the Defense Logistics Agency (DLA) for delivery to the DDSP New Cumberland Facility in Pennsylvania. The required delivery date is February 17, 2027, with a need ship date of January 31, 2027, and a delivery window of 82 days after order. Terms are specified as FOB Origin, with both inspection and acceptance occurring at the destination. The procurement is a Service-Disabled Veteran-Owned Small Business Set-Aside and requires compliance with various technical and quality standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Palletization must adhere to DLA requirement RP001. The contract incorporates several FAR and DFARS clauses covering fixed-price changes, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. Invoicing is to be processed electronically via the Wide Area Workflow (WAWF) system. Offers involving additive manufacturing are ineligible for award unless specifically authorized.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract solicitation SPE7M4-26-T-119R calls for the procurement of 42 units of a metal hose assembly identified by NSN 4720-01-501-1738, with the specific part number HYDRAFLOW 24984 P/N 57201-111 conforming to basic drawing NR 24984 57201 revision AA dated 10/19/2006. Delivery is required within 101 days from award, with a need ship date of September 8, 2026, and the goods must be shipped to W62G2T W1A8 DLA DIST SAN JOAQUIN, 25600 S CHRISMAN ROAD, REC WHSE 57, TRACY CA 95304-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by RA001, and take precedence over general standards such as ASTM D3951. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0 respectively, while unspecified attributes default to major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but zero non-conformances are required unless otherwise contractually permitted. Destination inspection applies under FAR 52.246-2, and any non-accepted supplies must have government identification removed per RQ011. Packaging and marking must comply with MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, with palletization adhering to the same standards, and unit packaging must reflect a QUP of 001. Items containing radioactive materials with activity exceeding 0.002 microcuries per gram or 0.01 microcuries per item must be labeled per MIL-STD-129, and all hazardous materials must be marked in accordance with 29 CFR 1910.1200. Cybersecurity compliance requires a CMMC Level

General Info

Procurement of 42 metal hose assemblies with strict quality, cybersecurity, and delivery requirements in 101 days.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

326220 - Rubber and Plastics Hoses and Belting Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

RFQ SPE7M4-26-T-119R for DLA Land and Maritime Fluid Handling Division

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 18

Combined Synopsis

Type ChangedMay 29

Combined Synopsis → Solicitation

Response DeadlineJun 3

Deadline has passed

Submission Closed

06/03/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressUSA

Contacts

Blake Tushar

contact@example.gov

+1 (555) 000-0000

Full Description

HOSE ASSEMBLY,METAL
HOSE ASSEMBLY,METAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SOURCE CONTROL DRAWING
ADEQUATE DATA FOR THE NSN/Part Number: 4720-01-501-1738 Quantity: 42 EA Purchase Request: 7015895610QTY: 42 Delivery: 101 days ADO